You are on page 1of 2
Technical Specification Plate Heat Exchanger SIGMA M 35 SAL Customer : Allam Marine. ‘Our inquiry | item — : 11328 Option 2.16v4000G83 Quote No, | Item + £U0113-13 V01 086512 | Pos.:2 Technical Calculation Gold side Warm side Section: LTW. ethylene glycol 25% ethylene glycol 50 % Flow rate T 45,000.0 Th 30,000.01 i 4,168.3 3,557.7 __kgih Temperature in -> out I 44.0 > 62.6 69.0 > 65.0 Media type quid ‘gaseous Tiguid | gaseous Density tin 7.026 1.052 ‘Specific Heat taka 3.806 3.445 ‘Thermal conductivily wink 0.503 0.405 Dynamic viscosity oP 4.012 1.374 Latent heat kg 0.000 0,000 ‘Surface tm 73 Value wink 4.2008 ‘Excess surface | Fouling % | om'KAN TAT | 0.1620 Plate material | Gasket material |Fbaing ‘AISI 304 | NBR | mechanically fixed 'No. of plates [Plate thickness [_No. [mem 22 0.50/0.50 Pressure 105s [bar {bar 0.400 [ 0.250 No. of passes | Plate arrangement [countercurrent 71x11 SH I 4]1x10SW Frame design ] Carbon steel - primer and coating according RAL 7001 Rules [ Fluid group [Category ‘97/23/EU TADZ000 | + | Category Intermediate Plate | intermediate Frame] No. 1 [0 ‘Oper. pressure (minjmay) [Test pressure| bar 0006.00 | 7.50 ‘Operating temperature [min [max BO °C | 1200 °C Design temperature [min {max 30°C | 120.0 °C. ‘Maximum fing no. of plates 20 [Cold side ‘Connections Warm side Pos. | Type | Size | Material Pos. | Type | Size | Material Th | A_ | studbolts DIN EN 1082-1 PNi6 DN‘00 facing] In| D | stud.boits DIN EN 1082-4 PNT6 DN700 facing plane/raw NBR. plane/raw NBR. [Out) F/ stud.botts DIN EN 1082-1 PN16 DN700 facing [Out] C | stud.bolts DIN EN 1092-1 PN76 DN100 facing plane/raw NBR. plane/raw NBR. E_ | stud.bolts DIN EN 1082-1 PNT6 DNTO0 facing plane/raw NBR F | stud.bolts DIN EN 10821 PNi6 DN700 facing plane/raw NBR ‘Accessories No. | Description ‘Sketch (subject to technical changes upon placing the err!) anit iow aioe rok pe Dimensions (mm) tength oO: 870.00 i width @ : 500.00 height oO) 1,370.00 measure (a): "272.00 ' measure (0): 246.00 A measure = (p): 1,190.00 Net weight (kg) 489 ‘Technical Specification Plate Heat Exchanger SIGMA M 35 SAL Beer, Heat Transfer Lid, Customer : Allam Marine ur inquiry [Item — : 11326 Option 2. 16v4o00G63 AA Therasye" Company Quote No. | Item + EU0113-13 V01 086612 | Pos.: 2 ‘Technical Calculation Cold side Warm side | ‘Section: HTW ethylene glycol 25 % ethylene glycol 50% Flow rate 45,000.0 Th 100,000.0____ Uh Mass flow 45.877.1 ki 102,751.1 Heatload Cw] ‘Surface Temperature in-out Coc $26 703 7000 818 Media ype: Tquid| gaseous |—Tauid | _ gaseous Density Tm 707 7.028 Specific Heat Kg | 3.839 3.576 “Thermal condustviiy Wik O54 0.415 Dynamic viscosity oP 0.708 0.748 Latent heat 7.000 7060 72.4 Value Wink 2046.0 Excess surface [Fouling % [om*RAW 30,80 [2.9270 Plate material | Gasket material Fung ‘AIST 304 [NBR [ mechanically fixed No. of plates [ Plate thickness [Noam 36 [0.50/0.50 Pressure loss bar [bar 0150 T 0500 No. of passes | Plate arrangement ‘ountereurreni [1x18 SW a7 3w Following section: LTW

You might also like