You are on page 1of 2

TECHNICAL SPECIFICATION

CABLE TRAY TYPE PERFORATED


BPPZRGC
(Cable Tray type Perforated, Tab Z
reinforced Hot Dip Galvanized)

HOT LAMINATED PLATE (LAC)


Description of Material:
Flat product obtained by laminated steel of
slabs previously heated to a temperature of
1250 C.
Mechanical Properties:

Technical
Standard
ASTM A-1011*
CS-TYPE B

Kg / mm

Kg / mm

..

21/34

25 min

Equivalent
Standard

JIS G-3131
SPHC

* Replaces to the ASTM A-569 Standard

A: Elongation

F: Fluence Limit
Strength

R: Tensile

DESCRIPTION
OF
MANUFACTURING:
Cable trays t y p e l a d d e r FALUMSA are manufacturing according to NEMA
STANDARD
VE-1, taking recommendations (NEC) NFPA-70. Process of
manufacturing includes the design, line, punching, folding bridges, unions and laterals that
make up the tray. The laterals ends with folding in C, V or Z. Are
interconnected with bridges at the bottom by the process of spot welding or MIG MAG can also
be riveted. The Cable trays type ladder provides maximum ventilation for the cables. For its
manufacturing are used plates LAC - LAF.

Hot Dip Galvanized Description:


After being manufactured, Cable Tray Type Ladder in LAC plate , go through a process of
pickled, cleaning of all types of impurities and oxidation before being subjected to a pond
of molten zinc on average of zinc adhesion, complying with ASTM STANDARD 123.
C.
L.

Calidad e Innovacin

L.

Falumsa s.c.r.l

CABLE TRAYS

C.

You might also like