Professional Documents
Culture Documents
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
CONTENIDO
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Conexin
de
alarmas
externas
y
configuracin
en
WCDMA
Eltek........147
Conexin de alarmas externas en Equipo ZTE158
Conexin de alarmas externas en Equipo sistema DAS.163
Etiquetado 3G Movistar.184
Etiquetado 2G Movistar.189
MV
FSEB
Eltek
Micro
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Todos los das de trabajos se debe dar una charla de seguridad donde se cerciore el supervisor que cada integrante del grupo
de trabajo acate todas las normas y procedimientos de trabajo implementados en el sitio, para evitar cualquier incidente
menor o grave. En esta charla deben firmar todos y cada uno, un formato que cada contratista elaborara, donde quede
registrado que recibieron mencionada charla.
As mismo, debe quedar un registro firmado y diario de todos los implementos entregados, as como el uso adecuado de cada
uno de ellos, y que su uso es completamente obligatorio en todas las instalaciones donde se encuentran laborando.
Todos estos reportes deben estar en sitio cada da de trabajo, ya que en cualquier momento se pueden solicitar, y la no
presencia de estos, puede causar sanciones al supervisor encargado de la obra.
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Estos EPP son de uno obligatorio segn la labor que se est ejecutando, mientras se
encuentren dentro del sitio realizando trabajos de instalacin, integracin troubleshooting.
For internal use
Unique document identifier (ID) / Version number / Life cycle status
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
METROSITE
1450
770
770
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Ultrasite indoor.
Se debe tener la precaucin de instalar el gabinete de manera que permita la perfecta apertura y cierre de la puerta.
As como tambin debe quedar nivelado, para lo cual se debe usar un nivel, de preferencia digital.
For internal use
Unique document identifier (ID) / Version number / Life cycle status
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Ultrasite Outdoor
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
10
Estao.
Etiquetas.
Crimpeadora de cables de trama.
Crimpeadora de cables de tierra.
Llaves Torx de diferentes medidas.
Llaves Allen de diferentes tamaos.
Conectores de trama (SMZ/BT-43, Din Macho, Din Hembra).
Cortadora o navaja.
Punzn.
Coaxialera de , o en su defecto las herramientas necesarias para armar ese tipo de conectores.
Laptop con todos los software cargados previamente.
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Telfono de prueba con field test net monitor para realizar pruebas de llamados y trfico de datos.
Site Mster con todo su equipamiento.
Contador de frecuencia con el cable necesario para medir frecuencia en la BTS.
Power Meter, en caso que el site master no posea medidor de potencia (Debe tener cargas y atenuador para evitar daar el mismo).
Tornillera necesaria para anclar los equipos.
Taladro con brocas de diferentes medidas.
Juego de destornilladores de diferentes tamaos.
Inclinmetro digital.
Nivel, cinta mtrica.
Documentacin general del sitio (PISM, TSS, CSP, Site Folders en blanco para ser llenado).
Documentacin de seguridad presente en el sitio para el registro de todos los eventos.
Documentacin del proyecto (SMR, Reporte devolucin, SDS, planilla de control, planificacin).
12
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Inspeccin de OOCC
Corroborar que exista en el sitio Energa AC.
Verificar que los soportes estn instalados, aplomados y con la orientacin correcta.
Las BDT instaladas segn documentacin (TSS, PISM)
13
De presentarse cualquier inconveniente en esta etapa, se debe dar aviso a jefe de proyecto, para decidir si
esto afecta o no la instalacin, de manera que se pueda iniciar la instalacin o se suspende la recepcin del
equipamiento.
Comprobada la posibilidad de instalacin, se inicia el proceso de recepcin del equipamiento. En esta etapa
se debe revisar todo el equipamiento necesario que debe llegar al sitio y comparndola con el SMR y Packing
List. Debe llegar todo el material solicitado por SMR, as como el hardware necesario, dependiendo del tipo
de sitio a instalar, y de acuerdo a lo planificado para el mismo.
De encontrarse un hardware o material faltante se debe dar aviso inmediatamente y elaborar un SDS, as
como si se debe devolver algn equipo que llegue de exceso un reporte de devolucin.
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
de
los
de
de
15
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Ultrasite indoor
Ultrasite Outdoor
16
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
17
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
18
Eltek
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Micro Eltek
Fijacin a Pared
20
Fijacin a Pole
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
21
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
El Kit de montaje opcional en mstil permite la instalacin de la BTS Flexi WCDMA en un mstil de 60-300 mm de dimetro. Se puede
colocar hasta cuatro mdulos en un kit de montaje en mstil.
Nota:
Solo se pueden instalar dos mdulos por platea (plinth).
Cuando se instalan mdulos en un mstil, asegurarse que el mismo en el sitio BTS sea lo suficientemente fuerte para soportar el peso de la
BTS, para cumplir los requerimientos ssmicos y los requerimientos locales en cuanto a viento.
22
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
23
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
24
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
25
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
26
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Consejo
Alinear las marcas de ubicacin en los
mdulos para ayudar en la alineacin
de agujeros con los pernos de fijacin.
Consejo
Usar las marcas en el mdulo para
ayudar en la alineacin de los agujeros
con los pernos de fijacin.
27
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
PRECAUCIN
Voltaje potencialmente letal puede ser
inducido si el equipo no esta puesta a
tierra correctamente. Asegrese que
todas las conexiones a tierra estn
seguras y no pueden moverse.
28
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
29
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Gabinete FCOA
30
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Eltek
31
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Micro Eltek.
32
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
33
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
34
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
35
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Alimentacin de Gabinetes
Metro site
36
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Ultrasite.
Conexin DC -48 V
37
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Eltek.
38
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Conexin monofsica
For internal use
Unique document identifier (ID) / Version number / Life cycle status
39
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Micro Eltek
Conexin
monofsica
brakers de protecin
con
40
Conexin
monofsica
con
brakers de protecin + OVP
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Micro eltek
41
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
42
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
L= Fase
N= Neutro
PE= Tierra
43
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Flexi WCDMA
44
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Se
debe
contar
con
Crimpeadora para el cable,
el grosor del Terminal min.:
25 mm y mx.: 35 mm. El
torque de apriete de los
terminales debe ser entre 10
y 14 Nw.
45
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
46
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Ya que el cable que llega en los packings actuales difiere de los colores usados en el pas, es necesario localizar
la instruccin global de conectado.
-48Marrn
VCC -48 vcc
Negro +
Malla GND
Debe ser cubierta
con teipeFor internal use
Unique document identifier (ID) / Version number / Life cycle status
47
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
El cable DC entre:
OVP-System module OVP-RF module
Debe ser conectado: Cable Azul: Negative (-) Cable Negro: Positive (+)
48
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Para este tipo de caso, existen varias posibilidades de instalacin de las OVPs. Una seria
la fijacin de los mismos a la escalerilla usando abrazaderas metlicas. Otra solucin
seria fijarlas en la pared como se muestra en las 2 figuras abajo. NO USAR PLINTH
Metlico
del OVP para fijarlo a la pared
49
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
50
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
51
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
52
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
53
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
54
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Cable de
alimentacin
estandar flexi AWG
6 (190cm) con
conector Multibeam
sellado IP
Ser conectado:
Al mdulo de
sistema DC output
mdulo de RF DC
input
55
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Sobre plinth
56
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Paso1
Paso2
Paso4
Paso3
For internal use
Unique document identifier (ID) / Version number / Life cycle status
57
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
995370
Step 5
Step 6
58
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Paso 7: Sacar las protecciones de goma que cubren los bornes de alimentacin DC. Favor no romper sta Goma.
Paso 8: Perforar con un punzn la proteccin de goma dnde entrar el cable de alimentacin DC del RF module
Step 7
Step 8
59
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Paso 9: Pasar los cables por las perforaciones hechas en lasprotecciones de goma que cubren los bornes de
alimentacin.
Paso 10: Colocar los terminales de Ojo M10 en las puntas de los cables y crimpear.
Alimentacin + 0 V cc
Alimentacin - 48 V cc
Step 9
Step 10
60
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Paso 11: Conectar los cables tal y como se muestra en la figura tomando en cuenta la polaridad de los bornes.
Paso 12: volver a colocar las protecciones de goma sobre las borneras.
Step 11
Step 12
61
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
62
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Antenna
Jumper cable
Mast Head
Amplifier
and BiasT
Conector
Feeder
clamps
Grounding kit
Combiners
diplexers
Feeder
cable
EMP protector
63
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Se debe fijar el Tilt elctrico y mecnico, de acuerdo a los requerimientos del proyecto
(CSP = Configuracin de sitio en proyecto).
For internal use
Unique document identifier (ID) / Version number / Life cycle status
64
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
65
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
CABLE
RFF 3/8-50
13 mm
25 mm
RFF 1/2-50
15 mm
30 mm
RF 1/2-50
80 mm
160 mm
RF 7/8-50
120 mm
250 mm
RF 1 1/4-50
200 mm
350 mm
RF 1 5/8-50
250 mm
500 mm
66
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
NOK
OK
OK
NOK
Jumper
Jumper
67
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
FEEDER
TYPE
REPEATED
RF 1/2
REPEATED
BENDING RADIUS
SINGLE BENDING
RADIUS
500mm
250mm
350mm
200mm
250mm
120mm
160mm
80mm
30m
m
25m
m
68
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
La curvatura de los cables deben seguir las especificaciones de NSN para evitar daos y disminuir la prdida en el
cable.
No permitido
MAL
MAL
69
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Cable
Maxima
1/4 Superflex
150mm
200mm
3/8 Superflex
150mm
200mm
1/2 Superflex
250mm
300mm
1 /2 Feeder
500mm
600mm
7/8 Feeder
900mm
1000mm
1-5/8 Feeder
1000mm
1400mm
70
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
150mm
200mm (Max)
RF 3/8 superflex
150mm
200mm (Max)
RFF 1/2
superflex
250mm
300mm (Max)
RF 1/2
RF 7/8
RF 1 5/8
500mm
600mm (Max)
900mm
1000mm (Max)
1000mm
71
1400mm (Max)
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Procedimiento de sellado
Responsabilidad.
Ser responsabilidad del personal contratista
responsable de la instalacin.
Descripcin de actividades.
Todas las conexiones exteriores deben ser selladas
una vez realizadas las mediciones en las antenas
El material a utilizar para el sellado es:
Cinta Aisladora (3M 88T).
72
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
El sellado debe realizarse sin humedad excesiva. Los conectores deben estar limpios y secos, se aplicaran 2
capas de cinta aisladora, 2 capas de cinta vulcanizante y 2 capas de cinta aisladora.
73
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
1._ Aplicar 2 capas traslapadas de cinta aisladora, comenzando 20mm ms debajo del
conector y 20 mm ms arriba del conector.
74
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
2._ Aplique la cinta vulcanizada desde la parte mas baja del conector y dejando aproximadamente 50 mm bajo el
conector, se deben aplicar 2 capas de cinta Vulcanizada.
La tensin de la cinta vulcanizada debe variar para lograr una aplicacin sin espacios vacos. Para evitar estos
vacos en reas crticas, tense la cinta hasta cerca de su punto de ruptura. En reas menos crticas, tense menos la
cinta. Asegrese que cada vuelta se superponga a la anterior en aproximadamente el 50% de su ancho. Evite dejar
la apariencia de escalones muy marcados, de manera que se asegure un sellado apropiado con la cinta
vulcanizada y tambin con la aplicacin de la cinta de aislar.
3._ Aplicar 2 capas traslapadas ligeramente estiradas de cinta de aislar comenzando 30 mm por debajo del
punto mas bajo de la cinta vulcanizada y siguiendo hacia arriba extendindose hasta 30 mm delante del otro
extremo de la cinta vulcanizada. Cada vuelta debe traslaparse de 1 a 2 mm sobre el final de la vuelta previa
en ambos lados. Se recomienda aplicar las 2 capas en forma continua.
Corte la cinta con un cuchillo cartonero para evitar perdida de tensin.
75
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Una vez realizada la inspeccin del sellado, en el cual se verifica que las capas se encuentran solapadas,
y que no existe posibilidad que se acumule o ingrese humedad a travs del sellado, se hace necesario la
aplicacin de amarras plsticas de exterior para cada extremo.
Para el sellado del conector en la antena, sellar de la misma forma que lo descrito para el sellado de
conectores a diferencia que en un extremo el sellado debe realizarse sobre el conector de antena que se
encuentra en el chasis
Adems de este tipo de sellado (vulco) descrito anteriormente, se utilizarn sellos del tipo de Termo
retrctil y Retrctil. El tipo de sellado a utilizar en cada caso ser definido slo por Telefnica Mvil a
travs de su Jefe de Proyecto asignado a cada uno de ellos.
For internal use
Unique document identifier (ID) / Version number / Life cycle status
76
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
La instalacin de los grounding Kits debe hacerse por personal calificado ya que la
mala instalacin del mismo puede provocar prdidas de retorno o ROE alto
produciendo mala calidad de servicio.
For internal use
Unique document identifier (ID) / Version number / Life cycle status
77
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
La Instalacin de los cables a la barra de tierra debe ser siempre de manera vertical con descarga hacia abajo.
Nota: En las torres o roof top se deben colocar gronding kit en los feeders
dependiendo de las barras de tierra que se encuentren en el recorrido de los mismos.
For internal use
Unique document identifier (ID) / Version number / Life cycle status
78
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Site Master
Site Analyser
TEST
EQUIPMENT
Phase Stable
Test Cable
Short/Open Circuit
or 50ohm Load
50 ohm
Medicin de Return Loss solo al feeder, con la carga al final del feeder
79
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
50 Ohm
Termination
Antenna
Adaptor
Site Master
Site Analyser
TEST
EQUIPMENT
External Jumper
Phase Stable
Test Cable
50 ohm
Adaptor, N(M) - 7/16"(F)
Feeder Cable
under Test
Short Circuit
Termination
Antenna
Adaptor
Site Master
Site Analyser
TEST
EQUIPMENT
External Jumper
Phase Stable
Test Cable
50 ohm
Adaptor, N(M) - 7/16"(F)
Feeder Cable
under Test
Medicin de cable loss del feeder, se coloca el componente short (corto) al final del feeder
For internal use
Unique document identifier (ID) / Version number / Life cycle status
80
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Antenna
External Jumper
(not in case of 1/2" cable)
Adaptor
Feeder Cable
N(M) - 7/16"(F)
BTS Cabinet
Internal Jumper*
Phase Stable
Test Cable
50 ohm
Site Master
Site Analyser
TEST
EQUIPMENT
*optional, depends
on installation
Medicin de Return Loss del sistema completo, se debe tener en cuenta que si existen MHA, estos se deben
bypasear.
For internal use
Unique document identifier (ID) / Version number / Life cycle status
81
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Jumper Cable
under Test
Site Master
Site Analyser
TEST
EQUIPMENT
Adaptor
Phase Stable
Test Cable
50 ohm
Adaptor
N(M) - 7/16"(F)
Si se realizan jumpers en el sitio, se deben medir para comprobar que estn bien.
Todas las mediciones deben ser guardadas para luego ser descargadas al PC.
Como recomendacin, es necesario que cada vez que culmine las mediciones de
un sitio, estas sean descargadas al computador, para evitar prdidas de
informacin.
82
Termination
50 Ohm
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Cabling
Ultrasite.
BYPASS
83
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
WBC 2:1
Cuando se solicite combinar 2:1 (WBC 2:1), se debe usar un Wide Band Combiner, y
conectar las salidas de Tx de cada TRX al combiner, y la salida del Combiner al Duplexor.
Como se muestra en la figura.
For internal use
Unique document identifier (ID) / Version number / Life cycle status
84
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
WBC 4:1
Cuando se solicite combinar 4:1 (WBC 4:1), se debe conectar la salida de Tx de cada TRX a
un combinador, luego la salida del combinador conectarla a otro combinador, y la salida del
combinador conectarla al Duplexor. Se puede apreciar estas conexiones en la figura de arriba.
85
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
86
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Flexi Edge
87
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
88
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
En la figura de abajo se puede observar la manera correcta de la instalacin de los cables de RF para
una Configuracion 444 WBC 4>1.
89
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Cables de TX
5
14
12
7
11
13
10
90
Nmero
Cabo
De - para
99493
1
TxA - TxA
(WBC)
99493
1
TxB - TxB
(WBC)
99493
1
(WBC)TxOut TxB(WBC)
99493
1
TxA - TxA
(WBC)
99493
1
TxB - TxB
(WBC)
99493
1
(WBC)TxOut TxA(WBC)
99493
1
99493
1
TxA - TxA
(WBC)
99493
1
TxB - TxB
(WBC)
10
99493
1
(WBC)TxOut TxA(WBC)
11
99493
1
TxA - TxA
(WBC)
12
99493
1
TxB - TxB
(WBC)
13
99493
1
(WBC)TxOut TxB(WBC)
14
99493
1
(WBC)TxOut
TxB(DDU)
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Setores
Cabos de RF de RX 1
3
7
Nmero
Cabo
De - Para
994933
RxA RxA3
994933
RxB RxB4
994931
RxA RxA1
994931
RxB RxB4
994931
RxA RxA3
994931
RxB RxB2
994931
RxA RxA2
994931
RxB RxB1
91
NOTA;
1) Un sector mostrado en la figura.
2) Todos 3 setores tienen configuraciones
idnticas.
3) Antes de continuar com el prximo sector
verificar que todos
los cables estn
correctos em sus posiciones.
4) Se Recomienda usar los campos vacos de
la tabla como verificadores de la
instalacin.
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
En el caso de usar las cajas, el Optical Converter Module (EOCA) se debe instalar en las cajas de 3U. El entry cable
de las cajas 3U tienen un punto para amarrar los cables pticos, esto es mandatorio para proteger el cable ante
posibles daos. Instalar el Optical Converter Module (EOCA) en la caja superior.
En instalaciones verticales, instalar el (EOCA) mirando hacia la izquierda, de tal manera que el terminal DC vaya
hacia abajo.
En instalaciones en gabinete, se sigue el orden de la instalacin en stack. En sectores lcales, instalar el (EOCA)
junto al System Module. Si el sector local es instalado en un gabinete externo (FCOA), el System Module y el
(EOCA) no podran ser instalados en el rack vertical debido a la falta de espacio (un System Module y dos (EOCA)
requieren 6U, pero el FCOA solo tiene 5U en vertical).
92
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
93
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Ubicaciones recomendadas para una configuracin local de sectores remotos 2+2+2 en mastil
DC terminals
94
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Nota: El adaptador multimodo (incluido en el delivery de los cables de 50 m 100 m) es necesario cuando dos
cables opticos son conectados juntos. El adaptador multimodo no brinda proteccin IP,La caja del FSEC (OVP)
si provee proteccin IP55.
95
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
El cable ptico de 2 m de modo simple provee proteccin IP55 en el EOCA. El otro extremo es conectado
dentro de la caja con proteccin IP55.
96
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
97
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Enrute el cable ptico atravs del cable entry para conectarlo en el tranceiver ptico. En instalaciones de mstil o
pared, enrute el cable atravez de del entru cable que tenga un punto para amarrar con tie wrap.
98
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
99
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
2+2+2 terraza
100
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
2+2+2 mstil
101
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
FLEXI WCDMA
INTERCONECTANDO MDULOS DE SISTEMAS Y RF
102
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
103
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Evitando Crossfeeder
Al posicionarse en el sector, el software le indicar donde
debera estar conectada cada antena.
104
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
105
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
XML 1
XML3
106
XML2
XML 4
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
XML5
XML8
XML 11
XML6
XML7
XML9
XML10
XML 12
XML13
107
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Tx1
De BTS con
conectores
DIN hembra
E1 1
Rx1
E1 2
Tx2
Rx2
E1 3
Tx3
Rx3
Tx4
E1 4
Rx4
DIN Machos
De BTS
(Nokia)
DIN Hembras
108
TX
(Telefonica)
TX con
conectores
DIN machos
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
5 cm
5 cm
109
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Conexin BTS
(Nokia)
110
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Conexin Transmisin
(Telefonica)
111
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Conectando la transmisin.
WCDMA
112
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
El cable Ethernet de igual manera se debe dejar conectado y dejado a un lado donde se
pueda apreciar y para comprobacin se debe tomar foto del mismo instalado y la posicin
donde queda.
For internal use
Unique document identifier (ID) / Version number / Life cycle status
113
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
114
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
115
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
116
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
117
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Flexi Edge
118
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
119
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
120
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
121
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
122
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Eltek Flatpack 2
Conexin
-48
VCC
cargas
de
bajo
consumo Max 10 Amp
123
Conexin + 0
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Conexin
-48Vcc
Conexin a
banco de batera,
Respaldo
Conexin
+0 Vcc
124
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
125
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Vista
del
rectificador.
equipo
126
Puntos de conexin
- 48VCC
Puntos de conexin
+0 VCC
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Las conexiones se realizan por la parte superior de los automticos, para ello es necesario
desarmar el panel y sacar para as tener acceso a la parte superior.
127
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
del
equipo
128
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
129
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
130
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
131
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
132
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
133
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
134
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
135
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
136
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
137
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
138
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
139
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
140
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
141
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
142
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
143
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
144
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
RET
3D x SECTOR 3
5 cms
RET MOVISTAR
1,0 cms.
2 cms
7 cms
0.5 cm
Espesor 0,2 cm
RET
1D x SECTOR 1
0.5 cm
2 cms
7 cms
0.5 cm
RET ENERGIA - 48
1 cms
1 cms
6 cms
RET
2D x SECTOR 2
0.5 cm
RET ETHERNET
2 cms
4 cms
RET ATERRAMIENTO
7 cms
5 cms
145
1 cms
1 cms
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
RET 1D x SECTOR 1
BLANCO-NEGRO
2 Uni
RET 2D x SECTOR 2
AZUL-BLANCO
2 Uni
RET 3D x SECTOR 3
ROJO-BLANCO
2 Uni
ROJO-BLANCO
2 Uni
MOVISTAR
AZUL-BLANCO
1 Uni
RET ETHERNET
NEGRO-BLANCO
2 Uni
RET ATERRAMIENTO
NEGRO-BLANCO
2 Uni
146
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
SEVERITY
INPUT 1
***
INPUT 2
**
INPUT 3
***
INPUT 4
***
INPUT 5
***
INPUT 6
***
INPUT 7
**
INPUT 8
***
INPUT 9
***
INPUT 10
***
Estas son las alarmas que se deben definir en la WCDMA, las primeras cuatro alarmas aplican siempre
cuando este el ELTEK y las dems cuando APLIQUEN ( EXTERNAS MV )
147
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Esta es la forma correcta de configurar alarmas en WCDMA, recordar que las alarmas 6, 7 y 9 son aquellas
que entrega obra civiles y deben quedar configuradas, activadas y probadas con el LIC.
148
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
149
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
150
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
EXTERNA 1
EXTERNA 2
EXTERNA 3
EXTERNA 4
EXTERNA 5
EXTERNA 6
EXTERNA 7
EXTERNA 8
EXTERNA 9
EXTERNA 10
EXTERNA 11
EXTERNA 12
1 12
1 12
151
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
152
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
153
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
154
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Falla de AC = Relay # 6
Falla de rectificador = Relay # 5
Falla de Bateras = Relay # 2
Puerta Abierta Eltek = Relay # 1
For internal use
Unique document identifier (ID) / Version number / Life cycle status
155
EXTERNA 3
EXTERNA 2
EXTERNA 1
EXTERNA 4
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
156
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
157
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
158
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
159
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
160
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
161
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
162
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
163
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
164
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
165
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
166
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
167
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
168
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
169
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
170
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
171
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
172
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
173
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
174
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
175
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
176
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
177
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
178
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
179
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
180
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
181
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
182
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
183
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Etiquetado 3G Movistar
184
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Etiquetado 3G Movistar
185
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Etiquetado 2G MOVISTAR
186
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Etiquetado 2G MOVISTAR
187
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Etiquetado 2G MOVISTAR
188
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Etiquetado 2G MOVISTAR
189
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Comisionamiento de BTS.
190
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Comisionamiento de BTS.
191
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Comisionamiento de BTS.
192
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Comisionamiento de BTS
193
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Comisionamiento de BTS.
194
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Comisionamiento de BTS.
195
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Integracin de BTS
196
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Integracin de BTS
197
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Integracin de BTS
198
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Integracin de BTS
199
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Integracin de BTS
200
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Integracin de BTS
201
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
Integracin de BTS
202
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
203
You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking
GRACIAS!!
204