2005 Ford Pickup F150
2005 ENGINE PERFORMANCE Acceleration Control - F150 Pickup
2005 ENGINE PERFORMANCE
Acceleration Control - F150 Pickup
SPECIFICATIONS
TORQUE SPECIFICATIONS
TORQUE SPECIFICATIONS
Description Nm Ib-ft
Fixed accelerator pedal 25 18
assembly bolts
‘Adjustable accelerator pedal 25 18
assembly bolts
DESCRIPTION AND OPERATION
ACCELERATION CONTROL
The acceleration control consists of:
« A fixed accelerator pedal.
« An adjustable accelerator pedal
The engine management system electronically operates the throttle of the engine in response
to throttle pedal movements initiated by the driver. In the event of a system failure, the
engine management system provides a "limp home" mode which allows the vehicle to be
driven with limited performance.
DIAGNOSIS AND TESTING
ACCELERATION CONTROL
REFER to the INTRODUCTION - GASOLINE article
REMOVAL AND INSTALLATION
ACCELERATOR PEDAL - FIXED2005 Ford Pickup F150
2005 ENGINE PERFORMANCE Acceleration Control - F150 Pickup
25Nm
+ (18 lb-ft)
SO
S@y
‘Aoog1312
Item | Part Number | Description
1 |— Accelerator pedal electrical
connector
2 | W709356 Accelerator pedal assembly
bolts (3 required)
3. | 9F836 ‘Accelerator pedal assembly
Fig. 1: View Of Accelerator Pedal Fixed
Courtesy of FORD MOTOR CO.
Removal and Installation
1, Disconnect the battery ground cable, For additional information, refer to BATTERY,
MOUNTING AND CABLES .2005 Ford Pickup F150
2005 ENGINE PERFORMANCE Acceleration Control - F150 Pickup
2. Disconnect the accelerator pedal electrical connector.
3, Remove the 3 accelerator pedal assembly bolts and the accelerator pedal assembly.
« To install, tighten to 25 Nm (18 Ib-in)
4. To install, reverse the removal procedure.
ACCELERATOR PEDAL - ADJUSTABLE
“f.
i
%
tom | Part Number | Description
1
erator pedal electrical
a0 ‘Acoelera
dive cable
3 pedal assembly
bots (3 require
Gai Accoleator pedal assembly
pedal assembly
ws0orzt
Fig. 2: View Of Accelerator Pedal Adjustable
Courtesy of FORD MOTOR CO.
Removal and Installation
NOTE: The brake pedal and the accelerator pedal must be in the same
position when installing a new cable or a new accelerator pedal.
The pedals must be all the way forward or all the way rearward.
1. Disconnect the battery ground cable. For additional information, refer to BATTERY,
MOUNTING AND CABLES .
2 Disconnect the accelerator pedal electrical connector.2005 Ford Pickup F150
2005 ENGINE PERFORMANCE Acceleration Control - F150 Pickup
3. Disconnect the accelerator pedal assembly drive cable
4, Remove the 3 accelerator pedal assembly bolts and the accelerator pedal assembly.
To install, tighten to 25 Nm (18 Ib-in),
5. To install, reverse the removal procedure.