Professional Documents
Culture Documents
jbarbour@thurchild.com.
Thurchild Inc
jbarbour@thurchild.com.
Greaseless bushings *US Army Corps of Engineers: Greaseless bushings for Hydropower applications: Program, Testing and Results CERL report 99/104 1999 http://www.cecer.army.mil/td/tips/pub/details.cfm?PUBID=2062&TOP=1 *US Army Corps of Engineers: Field Evaluation of Self-lubricated Mechanical Components for Civil Works Navigation Structures Report EDRC/CERL SR-04-8 http://www.cecer.army.mil/td/tips/pub/details.cfm?PUBID=4700&AREA=6
Overhauls: *Bureau of Reclamation: Mechanical overhaul procedures for Hydroelectric units Facilities Instructions, Standards, and Techniques, Volume 2-1 2000 http://www.usbr.gov/power/data/fist_pub.html *Bureau of Reclamation: Turbine Repair Facilities Instructions, Standards, and Techniques, Volume 2-5 2000 http://www.usbr.gov/power/data/fist_pub.html
Penstocks and piping *Bureau of Reclamation: Inspection of steel penstocks and pressure conduits Facilities Instructions, Standards, and Techniques, Volume 2-8 1996 http://www.usbr.gov/power/data/fist_pub.html ASME B31.1- 2004 Power piping ASME B31.3: 2002 Process piping ASME B31G 1991: Manual for determining the remaining strength of corroded pipe lines
Sluice gates *US Army Corps of Engineers: Engineering design of Vertical lift gates Engineer manual: EM 1110-2-2701, 1997 http://www.usace.army.mil/publications/eng-manuals/em.htm Hydropower station design *Engineer Manual EM-2-1701 Engineering and Design- Hydropower 1985 http://www.usace.army.mil/publications/eng-manuals/em.htm
Copper tubing and piping *Canadian Copper association Downloads for data and applications for copper piping and tubing http://www.coppercanada.ca/publications.htm Generators and turbines: Standard: IEEE 1095-1989 Guide for Installation of Vertical Generators and Generator/motors for hydroelectric Application
Thurchild Inc
jbarbour@thurchild.com.
Standard: IEEE 810-1987 (R2001) Standards for Hydraulic Turbine and Generator Integrally Forged Shaft couplings and shaft runout tolerances (Covers bolting requirements)
*Bureau of Reclamation: Stress Analysis of Hydraulic turbine parts Engineering monograph #30 1962 http://www.usbr.gov/pmts/hydraulics_lab/pubs/EM/EM30.pdf Lifting equipment ASME B30.2 2001: Overhead and Gantry cranes (Top running , bridge, single or multiple girder, top running trolley hoist)
ASME B30.11: Monorails and underhung cranes ASME B30.16 : Overhead hoists (underhung) CMAA Specification #70: Specifications for overhead traveling cranes CSA B167-96: Safety standard for maintenance and inspection of overhead cranes, gantry cranes, monorail hoists and trolleys. Electrical Safety code: CSA C22.2 No33 M1984: Construction and test of Electric Cranes and Hoists
Crane Manufacturers of America: CMMA Specification #70-Specifications for Electric Overhead Traveling cranes http://www.mhiastore.org/category.cfm?Category=39 *Whiting Crane Handbook: 3rd Edition
http://www.slideruleera.net/miscellaneous.html
Equipment painting The Society for protective coatings (http://www.sspc.org/ ) SSPC #10: Near white metal blast cleaning SSPC Vis 1: Pictorial Surface Preparation Standards SSPC PA2: Dry film measurement using non destructive magnetic gauges ASTM E337: Test for Relative humidity by Wet and dry bulb Psychomotor