Professional Documents
Culture Documents
Contents
Iptvcdn Basic Portal Operation Iptvslcs Basic Portal Operation Daily Service Management Daily User Operation & EPG Operation Create VOD & Live Programs
2012/10/1
CP Device Management
Click Add to add the CP equipment. Device type: Choose IPTV; MDP and CP are combined; module No: 133; office No: 100; CP information should correspond with the CP added in ZXUP service management system.
2012/10/1
CP Device Management
2012/10/1
First add the level-1 node. If the level-1 node is null, it is the parent node. The level-2 and level-3 nodes can be added according to project requirements. If there is only one stream media, as one stream media can only belong to one node, here only one node can be added.
1. 2.
3.
In IP Segment Management Node, choose the node-level IP segment management. The recording mode of stream media is real-time recording mode. For USS, choose Unified Storage Mode; otherwise, the archiving operation will fail. IPTV weight version: 16 items
After adding the node successfully, in System Resource Management successfully System Service Device Weight Configuration Management, query the related 16 items of weight information. Meanwhile, in System Resource Management Node Performance Query, query the performance details of this node. After adding the node successfully, the node serial No will be generated.
Chose the right Node. After adding the agent successfully, in CP device management, click Connected Agent of this CP, to display the agents belonging to this CP.
2012/10/1
Add a new POP unit. After adding the POP unit successfully, the POP Unit No will be generated.
2012/10/1
Input the information of the new EPG: device type EPG IP type, IP, module No, office No, process No 228. After adding the EPG successfully, in CP device management, click the Connected CP of this CP, to display the EPG belonging to this CP.
2012/10/1
VCDN Management
Input VCDN N 001 VCDN name and service provider N 001 (VCDN N I t No 001, d i id No No should be the same as SP ID, and both of them should be digits only). Click Add. If the added service provider No is not 001, modify the configuration item ywyycode in the configuraityon file abmgr.ini:/home/zxin10/etc on the interface machine into the same as it.
Click Add. After adding the node successfully, VCDN node No will be generated. Until now, the basic information of iptvcdn portal has been added completely. Log into iptvcdn portal again, and the drop-down lists of other menu items will all be displayed.
2012/10/1
Contents
Iptvcdn Basic Portal Operation Iptvslcs Basic Portal Operation Daily Service Management Daily User Operation & EPG Operation Create VOD & Live Programs
2012/10/1
VCDN Management
Click to Add VCDN. The added VCDN must exist in iptvcdn. That is, the VCDN code and VCDN name must be the same as those in iptvcdn.
Click to register the VCDN node. The added VCDN node must exist in iptvcdn, that is, the input content must be the same as that in iptvcdn.
2012/10/1
Click to add the EPG server. The terminal No must be the same as TERM_NO in the EPG configuration file /home/zxin10/was/tomcat/webapps/iptvepg/WEB /home/zxin10/was/tomcat/webapps/iptvepg/WEBINF/classes/com/zte/epg-constant.xml. Both the external communication address and the internal communication address are EPG addresses.
10
2012/10/1
Add 2 FTP servers for the iptvslcs side. For example, click Add FTP Server.
/home/zxin10/opftp/ /home/zxin10/cpspftp/
11
2012/10/1
CPSP Management
Add CPSP. Note: Here, only the content provider CP is available, as there is only one option CP in the Type option. Review CPSP. Input the provider code and choose the FTP server.
In iptvslcs, it is only aimed for the service provider. Click Register Charging Plan (Note: the registered charging plan must be exist in the billing system, and must have the same name). Only during the first configuration when setting up a new office, add 3 charging plans, which are: by times, by flow and by duration.
12
2012/10/1
SP Management
Add a new provider. SP code 001 is not related to VCDN, but it is better to be the same as VCDN code. code Click Allocate Charging Plan, to allocate the previously-configured charging plan to SP. Until now, the basic information on iptvslcs is configured completed. Log into iptvslcs portal again, and the drop-down lists of other menu items will all be displayed.
Contents
Iptvcdn Basic Portal Operation Iptvslcs Basic Portal Operation Daily Service Management Daily User Operation & EPG Operation Create VOD & Live Programs
13
2012/10/1
Click Cli k Add (N t I th Chi (Note: In the Chinese environment, i i t import th Chinese t the Chi template EPG_2.0.1_ZTE_V***; in the English environment, import the ITUN template ZXIPTV-ITUVASCFRAMEV****. Also upload the corresponding template zip file; that is, add the compressed file frame.zip.)
14
2012/10/1
Click Apply, otherwise the template cannot be used. EPG property configuration:
Service Management EPG Template Management EPG Template Management T l t M t Click its corresponding property configuration, and modify the columned of channel and playback into the serial number of the channel column. Modify the columned of VOD program into the serial number of the VOD column.
This configuration has no relationship with the content column management for IPTV portal on the management side. On iptvslcs side, add a default content category. Otherwise, the content release will fail as no content category can be found. Click Add. Here, add CP name as cp_sjj, and add the following content categories: Movie, Music, Serial.
15
2012/10/1
Contents
Iptvcdn Basic Portal Operation Iptvslcs Basic Portal Operation Daily Service Management Daily User Operation & EPG Operation Create VOD & Live Programs
After adding the user group, make sure to allocate resources. Otherwise, the users under this group cannot view the service information such as channels. Set the users account information and IPTV service information.
16
2012/10/1
Log into SLCS platform. Choose Authority Management Operator Group Authority. Choose the operator group from the drop-down list. Choose one function group from the function group list. In Authority Configuration, check on the authorities to be assigned. After the administrator logs into the system, he can only see the menus with the assigned authorities, and the menus without assigned authorities will not be displayed. Choose the menu it Ch th item A th it M Authority Management O t Operator Area Authority t A A th it From the left operator list, choose the operators to modify the area authority. From the right menu, choose the authorized area. Click the Authorize button, to assign the area authorities of the operator. To re-set the operator authority area, click the Reset button.
To add several user groups on the management side, if they correspond to different resources, such as different manufactures or different EPG templates, perform Platform Management Group Parameter Configuration. If there is only one user group, set the default parameters.
17
2012/10/1
Service Entry
Click Add In URL, input the following 4 addresses and their Add. URL corresponding shortcut keys. http://epgip:8080/iptvepg/serviceEntry.jsp?Action=1 Address shortcut: 275 http://epgip:8080/iptvepg/serviceEntry.jsp?Action=2 Address shortcut: 276 http://epgip:8080/iptvepg/serviceEntry.jsp?Action=3 Address shortcut: 277 http://epgip:8080/iptvepg/serviceEntry.jsp?Action=4 Address shortcut: 278 To add the other three service entry addresses, follow the same method as the first one.
Service Entry
Note: N t This is to configure the service entry of each manufacturer. Acquire these service entries from STB, which are provided by the capability platform of each manufacturer. For ZTE platform, the following 4 shortcut keys need to be configured; otherwise, the four keys F1~F4 on the remote controller cannot be used.
18
2012/10/1
Click Add (EPG realm name: http://epgip:8080/iptvepg/function/index.jsp). Other items can be ignored.
Binding IP
Add the IP segment for the IP of STB, and make it correspond to the node. On the IP segment management interface, choose the node, input the IP segment for the IP of STB, and then click Add STB Add.
On iptvslcs portal, choose System Resource Management EPG Server Group Management. Management Click to set the IP address segment. Click Add IP Address Restriction. Add the IP segment for the IP of STB, and make it correspond with EPG.
19
2012/10/1
Contents
Iptvcdn Basic Portal Operation Iptvslcs Basic Portal Operation Daily Service Management Daily User Operation & EPG Operation Create VOD & Live Programs
Upload Review Release Program Making Binding Service Binding Content Add the content
Click Add, and input the VOD content. In Upload Type, choose FTP uploading, and then input the device server IP address, username, password and path. Then upload and review the VOD content.
Choose the program to be released, and click Content Release. Only the released programs can be viewed in EPG.
20
2012/10/1
21
2012/10/1
Program Release
In Broadcast Management Live Broadcast Resource Management, click Add. After uploading successfully, click Release. The released content can be used in creating channels.
22
2012/10/1
Choose the content type, and choose the added content from content management as the live broadcast source. Choose the SDP content: Click Browse to find the local *.sdp file, display the SDP information, and automatically read the new live broadcast source of SDP content.
23
2012/10/1
The name of channel added on iptvcdn portal must be the same as that added on the iptvslcs platform. Otherwise, it cannot be associated. For the channel of content type, each item should be filled in as below: After adding the new channel successfully, in iptvslcs VOD management channel management channel setting, this channel is in unreleased status. Click Set (It must be set first before being released).
24
2012/10/1
Log into SLCS. Platform Vendor Capability Platform Channel List Management.
1.Channel URL: Multicast URL (igmp://multicast address: port), unicast URL (rtsp://unicast address: port/path), HTTP URL(http://service address: port/path),NULL means none. 2.Channel logo displaying start time: Time corresponded to the start time of channel play. 3.Channel logo displaying time interval : -1 means always shown, ignore lasting time; 0 means display once 4.Channel logo display lasting time: If the interval time is greater than zero, then it must be less than the interval time.
25
2012/10/1
1. 1 2.
3. 4.
Configure the channel list of each manufacturer, and acquire the channel list from the channel list interface on STB, which is provided by each manufacturer capability platform. After h Aft choosing the corresponding channel, th user channel serial number, i th di h l the h l i l b channel code and channel name are generated automatically. Channel URL: Input according to the standard format. IP address and port number can be filled as any value. This address and port will be reversed by EPG. The path is live/channel code.sdp. Whether the channel supports the delay: choose it according to the created channel. If choosing the delay, the delay URL is input in the format: rtsp://ip address:port/live/channel code.sdp. The IP address and port can be filled in as any value, which will be reversed by EPG.
Allocate Channel
Allocate the channel for the user group. On iptvslcs portal, enter User Management User portal Group Management. Click Allocate Resource, and choose Allocate Channel in the allocated resources. Choose the channel to allocate, and click Allocate. If the channel i d l th h l is delay, also allocate th d l l ll t the delay.
26
2012/10/1
27