Professional Documents
Culture Documents
Last Update: March 9, 2006 Figure 1 and 2 show how the camera and light mounting plate attach to the splash guard. Note 1: Please carefully follow all the welding specifications included in the welding document, which accompanies this document. Note 2: The triangular support (welded to the splashguard and the mounting plate) should not obstruct any holes. Note 3: The splashguard should be flush with the mounting plate as indicated in figure1.
Mounting Plate
Figure 1
Figure 2 shows another view of the mounting plate and the splashguard.
Figure 2 Figure 3 shows how the camera and the light will be mounted on the mounting plate. The two holes on the mounting plate behind the camera and the light can be used to secure the camera and light cables.
Figure 3
Figure 4 shows the overall structure of the mount when it is installed on a cable shovel. Figure 5 shows the fabrication details of the mounting plate, splashguard, and the gusset.
Figure 4
Note 4: The welding document, which accompanies this document, is written for an older version of this bracket by P&H. However, the instructions apply to the current bracket as well. In the current design, no part of the structure will be welded to the gearbox block.
Figure 5
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
.31 .38 x 2
.31 .38 x 4
6.94
8.00 4.46 4.27 2.56 1.14 5.97 8.97 9.77 10.31 11.17 12.04 12.58 16.00
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL ANGULAR: MACH BEND TWO PLACE DECIMAL THREE PLACE DECIMAL
PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Motion Metrics International Corp.. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Motion Metrics International Corp. IS PROHIBITED. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL FINISH
1.00
.50
.86
DATE
ASTM A36
USED ON
A Base Mount 1
1
REV
SHEET 1 OF 1
Page 8
Splashguard Plate
13.44
9.00 R1.00 x 2
7.25
R2.00
10.00
R2.00
R2.00
Page 9
DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL ANGULAR: MACH BEND TWO PLACE DECIMAL THREE PLACE DECIMAL
MATERIAL NAME DRAWN CHECKED ENG APPR. MFG APPR. Q.A. DATE
Nima N
1/17/ 2006
Edmond C. 1/17/2006
PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Motion Metrics International Corp. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Motion Metrics International Corp. IS PROHIBITED.
NEXT ASSY
USED ON
APPLICATION
SplashGuard
SHEET 1 OF 1
REV.
SCALE 1:3
WEIGHT:
0.50 x 30
.50 PL
9.14 .25
1.99 .44
Page 10
DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL ANGULAR: MACH BEND TWO PLACE DECIMAL THREE PLACE DECIMAL
MATERIAL NAME DRAWN CHECKED ENG APPR. MFG APPR. Q.A. DATE
Nima N
1/16/ 2006
Edmond C. 1/16/2006
PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Motion Metrics International Corp. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Motion Metrics International Corp. IS PROHIBITED.
ASTM A36
NEXT ASSY
USED ON
APPLICATION
triangle bracket
SHEET 1 OF 1
REV.
SCALE 1:3
WEIGHT: