You are on page 1of 87

STATE BANK OF INDIA Project Financing

Declaration
I,Vijayalaxmi.M.Balaraddi, declare that this project FINANCIAL APPRAISAL OF hereby entitled

PROJECT FINANCIED BY STATE BANK OF INDIA, has

been prepared by me under the valuable guidance and supervision of Ms. Mona Agarwal, Faculty Member, KLESs Institute of Management Studies And Research, Hubli,in partial fulfillment of the requirements for the award of the Masters Degree in Business Administration during the academic year 2008 I also declare that this project report has not been submitted to any other university for the award of any other degree, fellowship, associateship or any other similar title. Countersigned:-

KLESs Institute of Management Studies and Research 1

STATE BANK OF INDIA Project Financing

Ms.Mona Agarwal Vijayalaxmi.M.Balaraddi (Faculty Member) No.MBA06002087 Date: Place:Hubli.

Register

Acknowledgement
I would like to thank Dr.M.M.Bagali ,Director of KLESs Institute of Management Studies And Research, Hubli,for the guidance he has given to me in the conduction of my project work. I express my profound thanks to Ms.Mona Agarwal, my teacher and guide, who has been magnanimous in guiding, encouraging and supporting me during this project and she guided me to choose this immensely productive topic and it

KLESs Institute of Management Studies and Research 2

STATE BANK OF INDIA Project Financing

was because of her confidence in me that I have been able to carry out such a beautiful study report. My sincere thanks goes to Mr.P.S.Dev Prakash,Senior Assistant Manager SBI Keswapur Branch Hubli, for giving me an opportunity to do project and for extending his valuable time and guidance and patient support throughout my project. I would also like to extend my sincere thanks to Mr.Deshapande, and Mr Sajeesh for helping lot to know about my subject. I would also like to extend my gratitude to my parents, friends for their consistent encouragement, suggestions and moral support. Vijayalaxmi.M.Balaraddi KLESs IMSR, HUBLI.

CONTENTS

KLESs Institute of Management Studies and Research 3

STATE BANK OF INDIA Project Financing

.
SECTION I 4-7 9 -12 SECTION II 13-21 SECTION III

Executive Summary Industrial Profile Company Profile

Theoretical Background for the project work Introduction to project financing Project financing risks

22- 49

Project Financial Appraisal 50- 53

Project in Brief- SL flow controls SECTION IV

Financial Analysis Measures taken by SBI when the repayment is not possible SECTION V

54-74 75

Analysis Findings Recommendations Limitations Conclusions Bibliography

76 77 -78

79

KLESs Institute of Management Studies and Research 4

STATE BANK OF INDIA Project Financing

Executive Summary
Title of the project Financial Appraisal Of the Project Financed By SBI, Hubli
As a part of curriculum, every student studying MBA has to undertake a project on a particular subject assigned to him/her. Accordingly I have been assigned the project work on the study of project financing in Banking Sector. As it is rightly said that finance is the life blood of every business so every business need funds for smooth running of its activities and bank is the one of the source through which the business get funds, before financing the bank appraise the projects and if the projects meet the requirement of the bank rules than only they will finance. Project financing is commonly used as a financing method in capital-intensive industries for projects requiring large investments of funds, such as the construction of power plants, pipelines, transportation systems, mining facilities, industrial facilities and heavy manufacturing plants.

The core area of this project focuses on the financial appraisal of SL flow controls, who has started Manufacturing of industrial valves which is financed by SBI . This project has been undertaken at State Bank of India, Hubli branch which is one of the largest bank in India having vast domestic network of over 9000 branches. SBI deals with all financial activities which involves all types of deposits, advances including project financing, mutual funds etc

KLESs Institute of Management Studies and Research 5

STATE BANK OF INDIA Project Financing

Financial appraisal which mainly leads to the feasibility study consisting of ratio analysis and capital budgeting calculations.

Main Objective

Financial appraisal of project


Sub Objectives 1. 2. 3. 4. 5. To know the projects financed by SBI. To know the policies of SBI towards the project financing. To know the risks involved in projects financing. To appraise the projects using financial tools. To know the measures taken by bank when the clients fail to repay the amount.

Methodology
Data collection method: The report will be prepared mainly using secondary data viz, Secondary data www.sbi.com. Company manuals. Commercial Banks Book. The techniques, which would be used for the study: 1. Discussions with Bank guide and customers. 2. By studying projects reports . 3. Using Project Techniques:

KLESs Institute of Management Studies and Research 6

STATE BANK OF INDIA Project Financing

Analysis:This analysis part is related to the financial viability of the project SL Flow Controls: Through ratio analysis I analyzed that the liquidity position of the firm is good and it is maintaining the standard ratio.. Debt Equity ratio is in decreasing trend, it shows that the firm is reducing its liability portion by paying the loan year on year so the financial risk less. Profitability ratios related to sales and capital employed are in increasing trend, it shows that the sales are increasing and the firm using its resources efficiently. Debt Service Coverage Ratio is also in increasing trend, it shows that the firms ability to make the loan repayments on time over the debt life of the project. The payback period is within the debt life of the project. The net present value of the project is positive, The positive net present value will result only if the project generates cash inflows at a rate higher than the opportunity cost of capital . Since the Net Present Value of the above project is positive, the proposal can be accepted. The internal rate of the return is higher than what accepted so the project is accepted.

KLESs Institute of Management Studies and Research 7

STATE BANK OF INDIA Project Financing

Findings :- These are related to bank in general


State bank of India is strictly following the guidelines of RBI on Project Financing Sanctioning for the projects is approved by RASMECC (Retailed Assets Small And Medium Enterprises Credit Cell). The bank finances the projects only through term loans. Interest rates are fixed depending upon the projects which is known as State Bank advance rate. When the clients fail to pay the interest, 3 months from the due date the term loan granted will be treated as Non Performing Assets. If the interest is due further 3 more months then it will be treated as doubtful assets and interest rates becomes zero. Again for further 3 months it goes as loss assets and the bank write off the account. Every firm starting up a new project should make an insurance policy with the same bank itself.

Recommendations: Bank check only financial, technical and commercial feasibility of the project and it should not consider sensitivity analysis and social cost benefit

KLESs Institute of Management Studies and Research 8

STATE BANK OF INDIA Project Financing

analysis of the project so bank should consider this because these are also important from the point of view of risk and economy growth. Bank should be caution about the availability of security and ensure honesty of both borrower and guarantor so as to avoid the account becoming the loss assets.

Limitation of the study:Some of the information are confidential in nature that could not divulged for study.

Rationale behind choosing this topic:


Project financing is a comparatively new field for Indian banks,at present scenario India is becoming developed country so because of that many projects are going on that may be infrastructure, power generation, mining etc. considering all these the projects must need finance, to fulfill these objectives the project undertaken companies raise the funds through capital market, debt market and through banks. Whenever bank wants to finance these type of projects it must study the feasibility of the project and then it will go for financing that project Because of this it is very necessary to study the process of project financed by the bank so I choose this topic to study how SBI study the projects and the method of financing the projects.

KLESs Institute of Management Studies and Research 9

STATE BANK OF INDIA Project Financing

Industrial Profile
HISTORY OF BANKING IN INDIA
Without a sound and effective banking system in India it cannot have a healthy economy. The banking system of India should not only be hassle free but it should be able to meet new challenges posed by the technology and any other external and internal factors. For the past three decades Indias banking system has several outstanding achievements to its credit. The most striking is its extensive reach. It is no longer confined to only metropolitans or cosmopolitans in India. In fact, Indian banking system has reached even to the remote corners of the country. This is one of the main reasons for Indias growth. The governments regular policy for Indian bank since 1969 has paid rich dividends with the nationalization of 14 major private banks of India.

KLESs Institute of Management Studies and Research 10

STATE BANK OF INDIA Project Financing

The first bank in India, though conservative, was established in 1786. From 1786 till today, the journey of Indian Banking System can be segregated into three distinct phases. They are as mentioned below: Phase I The General Bank of India was set up in the year 1786. Next came Bank of Hindustan and Bengal Bank. The East India Company established Bank of Bengal (1809), Bank of Bombay (1840) and Bank of Madras (1843) as independent units and called it Presidency Banks. These three banks were amalgamated in 1920 and Imperial Bank of India was established which started as private shareholders banks, mostly European shareholders. In 1865 Allahabad Bank was established and first time exclusively by Indians, Punjab National Bank Ltd. was set up in 1894 with headquarters at Lahore. Between 1906 and 1913, Bank of India, Central Bank of India, Bank of Baroda, Canara Bank, Indian Bank, and Bank of Mysore were set up. Reserve Bank of India came in 1935. During the first phase the growth was very slow and banks also experienced periodic failures between 1913 and 1948. There were approximately 1100 banks, mostly small. To streamline the functioning and activities of banks, mostly small. To streamline the functioning and activities of commercial banks, the Government of India came up with The Banking Companies Act, 1949 which was later changed to Banking Regulation Early phase from 1786 to 1969 of Indian Banks. Nationalization of Indian Banks and up to 1991 prior to Indian. Banking sector Reforms. New phase of Indian Banking System with the advent of Indian. Financial & Banking Sector Reforms after 1991.

KLESs Institute of Management Studies and Research 11

STATE BANK OF INDIA Project Financing

Act 1949 as per amending Act of 1965 (Act No. 23 of 1965). Reserve Bank of India was vested with extensive powers for the supervision of banking in India as the Central Banking System. During those days public has lesser confidence in the banks. As an aftermath deposit mobilisation was slow. Abreast of it the savings bank facility provided by the Postal department was comparatively safer. Moreover, funds were largely given to traders. Phase II Government took major steps in this Indian Banking Sector Reform after independence. In 1955, it nationalised Imperial Bank of India with extensive banking facilities on a large scale specially in rural and semi-urban areas. It formed State Bank of India to act as the principal agent of RBI and to handle banking transactions of the Union and state government all over the country. Seven banks forming subsidiary of State Bank of India was nationalised in 1960 on 19th July 1969, major process of nationalisation was carried out. It was the effort of the then Prime Minister of India, Mrs. Indira Gandhi. 14 major commercial banks in the country were nationalized.Second phase of nationalisation Indian Banking Sector Reform was carried out in 1980 with seven more banks. This step brought 80% of the banking segment in India under Government ownership. The following are the steps taken by the Government of India to Regulate Banking Institutions in the Country: 1. 1949: Enactment of Banking Regulation Act. 2. 1955: Nationalisation of State Bank of India. 3. 1959: Nationalisation of SBI subsidiaries. 4. 1961: Insurance cover extended to deposits.

KLESs Institute of Management Studies and Research 12

STATE BANK OF INDIA Project Financing

5. 1969: Nationalisation of 14 major banks. 6. 1971: Creation of credit guarantee corporation. 7. 1975: Creation of regional rural banks. 8. 1980: Nationalisation of seven banks with deposits over 200 crores. After the nationalization of banks, the branches of the public sector bank India raised to approximately 800% in deposits and advances took a huge jump by 11000%. Banking in the sunshine of Government ownership gave the public implicit faith and immense confidence about the sustainability of these institutions. Phase III This phase has introduced many more products and facilities in the banking sector in its reforms measure. In 1991, under the chairmanship of M Narasimham, a committee was set up by his name, which worked for the Liberalization of Banking Practices. The country is flooded with foreign banks and their ATM stations. Efforts are being put to give a satisfactory service to customers. Phone banking and net banking is introduced. The entire system became more convenient and swift. Time is given more importance than money. The financial system of India has shown a great deal of resilience. It is sheltered from any crisis triggered by any external macroeconomics shock as other East Asian Countries suffered. This is all due to a flexible exchange rate regime, the foreign reserves are high, the capital account is not yet fully convertible, and banks and their customers have limited foreign exchange exposure. Banking in India originated in the first decade of 18th century with The General Bank Of India coming into existence in 1786. This was followed by Bank of Hindustan. Both these banks are now defunct. The oldest bank in existence in India is the State Bank Of

KLESs Institute of Management Studies and Research 13

STATE BANK OF INDIA Project Financing

India being established as The Bank Of Calcutta in Calcutta in June 1806. Couple of Decades later, foreign Banks like HSBC and Credit Lyonnais Started their Calcutta operations in 1850s. At that point of time, Calcutta was the most active trading port, mainly due to the trade of British Empire and due to which banking actively took roots there and prospered. The first fully Indian owned bank was the Allahabad Bank set up in 1865. By 1900, the market expanded with the establishment of banks like Punjab National Bank in 1895 in Lahore; Bank of India in 1906 in Mumbai-both of which were founded under private ownership. Indian Banking Sector was formally regulated by Reserve Bank Of India from 1935. After Indias independence in 1947, the Reserve Bank was nationalised and given broader powers.

SBI Group
The Bank of Bengal, which later became the State Bank of India. State Bank of India with its seven associate banks commands the largest banking resources in India. Nationalization

KLESs Institute of Management Studies and Research 14

STATE BANK OF INDIA Project Financing

The next significant milestone in Indian Banking happened in late 1960s when the then Indira Gandhi government nationalized on 19th July 1949, 14 major commercial Indian banks followed by nationalisation of 6 more commercial Indian banks in 1980. The stated reason for the nationalisation was more control of credit delivery. After this, until 1990s, the nationalized banks grew at a leisurely pace of around 4% also called as the Hindu growth of the Indian economy. After the amalgamation of New Bank of India with Punjab National Bank, currently there are 19 nationalized banks in India. LiberalizationIn the early 1990s the then Narasimha rao government embarked a policy of

liberalization and gave licences to a small number of private banks, which came to be known as New generation tech-savvy banks, which included banks like ICICI and HDFC. This move along with the rapid growth of the economy of India, kick started the banking sector in India, which has seen rapid growth with strong contribution from all the sectors of banks, namely Government banks, Private Banks and Foreign banks. However there had been a few hiccups for these new banks with many either being taken over like Global Trust Bank while others like Centurion Bank have found the going tough. The next stage for the Indian Banking has been set up with the proposed relaxation in the norms for Foreign Direct Investment, where all Foreign Investors in Banks may be given voting rights which could exceed the present cap of 10%, at present it has gone up to 49% with some restrictions. The new policy shook the Banking sector in India completely. Bankers, till this time, were used to the 4-6-4 method (Borrow at 4%; Lend at 6%; Go home at 4) of

KLESs Institute of Management Studies and Research 15

STATE BANK OF INDIA Project Financing

functioning. The new wave ushered in a modern outlook and tech-savvy methods of working for traditional banks. All this led to the retail boom in India. People not just demanded more from their banks but also received more. CURRENT SCENARIO Currently (2007), overall, banking in India is considered as fairly mature in terms of supply, product range and reach-even though reach in rural India still remains a challenge for the private sector and foreign banks. Even in terms of quality of assets and capital adequacy, Indian banks are considered to have clean, strong and transparent balance sheets-as compared to other banks in comparable economies in its region. The Reserve Bank of India is an autonomous body, with minimal pressure from the government. The stated policy of the Bank on the Indian Rupee is to manage volatilitywithout any stated exchange rate-and this has mostly been true. With the growth in the Indian economy expected to be strong for quite some timeespecially in its services sector, the demand for banking services-especially retail banking, mortgages and investment services are expected to be strong. M&As, takeovers, asset sales and much more action (as it is unraveling in China) will happen on this front in India. In March 2006, the Reserve Bank of India allowed Warburg Pincus to increase its stake in Kotak Mahindra Bank (a private sector bank) to 10%. This is the first time an investor has been allowed to hold more than 5% in a private sector bank since the RBI announced norms in 2005 that any stake exceeding 5% in the private sector banks would need to be vetted by them. Currently, India has 88 scheduled commercial banks (SCBs) - 28 public sector banks (that is with the Government of India holding a stake), 29 private banks (these do not have government stake; they may be publicly listed and traded on stock exchanges)

KLESs Institute of Management Studies and Research 16

STATE BANK OF INDIA Project Financing

and 31 foreign banks. They have a combined network of over 53,000 branches and 17,000 ATMs. According to a report by ICRA Limited, a rating agency, the public sector banks hold over 75 percent of total assets of the banking industry, with the private and foreign banks holding 18.2% and 6.5% respectively.

Banking in India

KLESs Institute of Management Studies and Research 17

STATE BANK OF INDIA Project Financing

1 Central Bank

Reserve Bank of India State Bank of India, Allahabad Bank, Andhra Bank, Bank of Baroda, Bank of India, Bank Bank of of Maharastra,Canara Bank, Central India,

2 Nationalised Banks

Corporation Bank, Dena Bank, Indian Bank, Indian overseas Bank,Oriental Bank of Commerce, Punjab and Sind Bank, Punjab National Bank, Syndicate Bank, Union Bank of India, United Bank of India, UCO Bank,and Vijaya Bank. Bank of Rajastan, Bharath overseas Bank, Catholic Syrian Bank, Centurion Bank of Punjab, City Union Bank, Development Credit Bank, Dhanalaxmi Bank, Federal Bank, Ganesh Bank of Kurundwad, HDFC Bank, ICICI Bank, IDBI, IndusInd Bank, ING Vysya Bank, Jammu and Kashmir Bank, Karnataka Bank Limited, Karur Vysya Bank, Kotek Mahindra Bank, Lakshmivilas Bank, Lord Krishna Bank, Nainitak Bank, Ratnakar Bank,Sangli Bank, SBI Commercial and International Bank, South Indian Bank, Tamil Nadu Merchantile Bank Ltd., United Western Bank, UTI Bank, YES Bank.

3 Private Banks

KLESs Institute of Management Studies and Research 18

STATE BANK OF INDIA Project Financing

Structure of Indian Banking


Reserve Bank of India is the regulating body for the Indian Banking Industry. It is a mixture of Public sector, Private sector, Co-operative banks and foreign banks. The private sector banks are further spilt into old banks and new banks. Reserve Bank of India Scheduled Banks

Scheduled Commercial Banks

Scheduled Co-operative Banks

Public Sector Banks

Private Sector Banks

Foreign Banks

Regional Rural Banks

Nationalized Banks

SBI & its Associates

Scheduled Urban cooperative Bank

Scheduled State cooperative Banks

Old private sector Banks

New private sector Banks

KLESs Institute of Management Studies and Research 19

STATE BANK OF INDIA Project Financing

Bank Overview
STATE BANK OF INDIA Not only many financial institution in the world today can claim the antiquity and majesty of the State Bank Of India founded nearly two centuries ago with primarily intent of imparting stability to the money market, the bank from its inception mobilized funds for supporting both the public credit of the companies governments in the three presidencies of British India and the private credit of the European and India merchants from about 1860s when the Indian economy book a significant leap forward under the impulse of quickened world communications and ingenious method of industrial and agricultural production the Bank became intimately in valued in the financing of practically and mining activity of the Sub- Continent Although large European and Indian merchants and manufacturers were undoubtedly thee principal beneficiaries, the small man never ignored loans as low as Rs.100 were disbursed in agricultural districts against glad ornaments. Added to these the bank till the creation of the Reserve Bank in 1935 carried out numerous Central Banking functions. Adaptation world and the needs of the hour has been one of the strengths of the Bank, In the post depression exe. For instance when business opportunities become extremely restricted, rules laid down in the book of instructions were relined to ensure that good business did not go post. Yet seldom did the bank contravenes its value as depart from sound banking principles to retain as expand its business. An innovative array of office, unknown to the world then, was devised in the form of branches, sub branches, treasury pay office, pay office, sub pay office and out students to exploit the opportunities of an expanding economy. New business strategy was also evaded way

KLESs Institute of Management Studies and Research 20

STATE BANK OF INDIA Project Financing

back in 1937 to render the best banking service through prompt and courteous attention to customers. A highly efficient and experienced management functioning in a well defined organizational structure did not take long to place the bank an executed pedestal in the areas of business, profitability, internal discipline and above all credibility A impeccable financial status consistent maintenance of the lofty traditions if banking an observation of a high standard of integrity in its operations helped the bank gain a preeminent status. No wonders the administration for the bank was universal as key functionaries of India successive finance minister of independent India Resource Bank of governors and representatives of chamber of commercial showered economics on it. Modern day management techniques were also very much evident in the good old days years before corporate governance had become a puzzled the banks bound functioned with a high degree of responsibility and concerns for the shareholders. An unbroken records of profits and a fairly high rate of profit and fairly high rate of dividend all through ensured satisfaction, prudential management and asset liability management not only protected the interests of the Bank but also ensured that the obligations to customers were not met. The traditions of the past continued to be upheld even to this day as the State Bank years itself to meet the emerging challenges of the millennium.

ABOUT LOGO

KLESs Institute of Management Studies and Research 21

STATE BANK OF INDIA Project Financing

.
THE PLACE TO SHARE THE NEWS ... SHARE THE VIEWS

Togetherness is the theme of this corporate loge of SBI where the world of banking services meet the ever changing customers needs and establishes a link that is like a circle, it indicates complete services towards customers. The logo also denotes a bank that it has prepared to do anything to go to any lengths, for customers. The blue pointer represent the philosophy of the bank that is always looking for the growth and newer, more challenging, more promising direction. The key hole indicates safety and security. MISSION STATEMENT: To retain the Banks position as premiere Indian Financial Service Group, with world class standards and significant global committed to excellence in customer, shareholder and employee satisfaction and to play a leading role in expanding and diversifying financial service sectors while containing emphasis on its development banking rule. VISION STATEMENT: Premier Indian Financial Service Group with prospective world-class Standards of efficiency and professionalism and institutional values Retain its position in the country as pioneers in Development banking. Maximize the shareholders value through high-sustained earnings per Share. An institution with cultural mutual care and commitment, satisfying and

KLESs Institute of Management Studies and Research 22

STATE BANK OF INDIA Project Financing

Good work environment and continues learning opportunities.

VALUES Excellence in customer service Profit orientation Belonging commitment to Bank Fairness in all dealings and relations Risk taking and innovative Team playing Learning and renewal Integrity Transparency and Discipline in policies and systems.

Organization Structure
MANAGING DIRECTOR

CHIEF GENERAL MANAGER

G. M

G.M (C&B)

G. M (F&S)

G.M

G.M (I) & CVO (P&D)

(Operations)

KLESs Institute of Management Studies and Research 23

STATE BANK OF INDIA Project Financing Zonal off Regional officers

.
Functional Heads

Theoretical Background for the project work Project Financing


INTRODUCTIONProject financing is an innovative and timely financing technique that has been used on many high-profile corporate projects, including Euro Disneyland and the Euro tunnel. Employing a carefully engineered financing mix, it has long been used to fund largescale natural resource projects, from pipelines and refineries to electric-generating facilities and hydroelectric projects. Increasingly, project financing is emerging as the preferred alternative to conventional methods of financing infrastructure and other large-scale projects worldwide. MEANINGProject financing involves non-recourse financing of the development and construction of a particular project in which the lender looks principally to the revenues expected to

KLESs Institute of Management Studies and Research 24

STATE BANK OF INDIA Project Financing

be generated by the project for the repayment of its loan and to the assets of the project as collateral for its loan rather than to the general credit of the project sponsor. RATIONALEProject financing is commonly used as a financing method in capital-intensive industries for projects requiring large investments of funds, such as the construction of power plants, pipelines, transportation systems, mining facilities, industrial facilities and heavy manufacturing plants. The sponsors of such projects frequently are not sufficiently creditworthy to obtain traditional financing or are unwilling to take the risks and assume the debt obligations associated with traditional financings. Project financing permits the risks associated with such projects to be allocated among a number of parties at levels acceptable to each party. PRINCIPLE ADVANTAGE AND OBJECTIVESNON RECOURSE The typical project financing involves a loan to enable the sponsor to construct a project where the loan is completely "non-recourse" to the sponsor, i.e., the sponsor has no obligation to make payments on the project loan if revenues generated by the project are insufficient to cover the principal and interest payments on the loan. In order to minimize the risks associated with a non-recourse loan, a lender typically will require indirect credit supports in the form of guarantees, warranties and other covenants from the sponsor, its affiliates and other third parties involved with the project MAXIMIZE LEVERAGE In a project financing, the sponsor typically seeks to finance the costs of development and construction of the project on a highly leveraged basis. Frequently,

KLESs Institute of Management Studies and Research 25

STATE BANK OF INDIA Project Financing

such costs are financed using 80 to 100 percent debt. High leverage in a non-recourse project financing permits a sponsor to put less in funds at risk, permits a sponsor to finance the project without diluting its equity investment in the project and, in certain circumstances, also may permit reductions in the cost of capital by substituting lowercost, tax-deductible interest for higher-cost, taxable returns on equity. OFF-BALANCESHEET TREATMENT Depending upon the structure of a project financing, the project sponsor may not be required to report any of the project debt on its balance sheet because such debt is non-recourse or of limited recourse to the sponsor. Off-balance-sheet treatment can have the added practical benefit of helping the sponsor comply with covenants and restrictions relating to borrowing funds contained in other indentures and credit agreements to which the sponsor is a party. MAXIMIZE TAX-BENEFITS Project financings should be structured to maximize tax benefits and to assure that all available tax benefits are used by the sponsor or transferred, to the extent permissible, to another party through a partnership, lease or other vehicle. DISADVANTAGES-

Project financings are extremely complex. It may take a much longer period of time to structure, negotiate and document a project financing than a traditional financing, and the legal fees and related costs associated with a project financing can be very high. Because the risks assumed by lenders may be greater in a non-recourse project financing than in a more traditional financing, the cost of capital may be greater than with a traditional financing.

KLESs Institute of Management Studies and Research 26

STATE BANK OF INDIA Project Financing

PROCESS OF PROJECT FINANCING


Feasibility Study As one of the first steps in a project financing is hiring of a technical consultant and he will prepare a feasibility study showing the financial viability of the project. Frequently, a prospective lender will hire its own independent consultants to prepare an independent feasibility study before the lender will commit to lend funds for the project.

KLESs Institute of Management Studies and Research 27

STATE BANK OF INDIA Project Financing Contents The feasibility study should analyze every technical, financial and other aspect of the project, including the time-frame for completion of the various phases of the project development, and should clearly set forth all of the financial and other assumptions upon which the conclusions of the study are based, Among the more important items contained in a feasibility study are: 1. Description of project 2. Description of sponsor(s). 3. Sponsors' Agreements. 4. Project site. 5. Governmental arrangements. 6. Source of funds. 7. Feedstock Agreements. 8. Off take Agreements. 9. Construction Contract. 10. Management of project. 11. Capital costs. 12. Working capital. 13. Equity sourcing. 14. Debt sourcing. 15. Financial projections. 16. Market study. 17. Assumptions. THE PROJECT COMPANY Legal Form

KLESs Institute of Management Studies and Research 28

STATE BANK OF INDIA Project Financing

Sponsors of projects adopt many different legal forms for the ownership of the project. The specific form adopted for any particular project will depend upon many factors, including: The amount of equity required for the project The concern with management of the project The availability of tax benefits associated with the project The need to allocate tax benefits in a specific manner among the project company investors. The three basic forms for ownership of a project are: 1. CorporationsThis is the simplest form for ownership of a project. A special purpose corporation may be formed under the laws of the jurisdiction in which the project is located, or it may be formed in some other jurisdiction and be qualified to do business in the jurisdiction of the project. 2. General PartnershipsThe sponsors may form a general partnership. In most jurisdictions, a partnership is recognized as a separate legal entity and can own, operate and enter into financing arrangements for a project in its own name. A partnership is not a separate taxable entity, and although a partnership is required to file tax returns for reporting purposes, items of income, gain, losses, deductions and credits are allocated among the partners, which include their allocated share in computing their own individual taxes. Consequently, a partnership frequently will be used when the tax benefits associated with the project are significant. Because the general partners of a

KLESs Institute of Management Studies and Research 29

STATE BANK OF INDIA Project Financing

partnership are severally liable for all of the debts and liabilities of the partnership, a sponsor frequently will form a wholly owned, single-purpose subsidiary to act as its general partner in a partnership. 3. Limited PartnershipsA limited partnership has similar characteristics to a general partnership except that the limited partners have limited control over the business of the partnership and are liable only for the debts and liabilities of the partnership to the extent of their capital contributions in the partnership. A limited partnership may be useful for a project financing when the sponsors do not have substantial capital and the project requires large amounts of outside equity. Limited Liability CompaniesThey are a cross between a corporation and a limited partnership. Project Company Agreements Depending on the form of project company chosen for a particular project financing, the sponsors and other equity investors will enter into a stockholder agreement, general or limited partnership agreement or other agreement that sets forth the terms under which they will develop, own and operate the project. At a minimum, such an agreement should cover the following matters: Ownership interests. Capitalization and capital calls. Allocation of profits and losses. Distributions.

KLESs Institute of Management Studies and Research 30

STATE BANK OF INDIA Project Financing

Accounting. Governing body and voting. Day-to-day management. Budgets. Transfer of ownership interests. Admission of new participants. Default. Termination and dissolution. Principal Agreements in a Project Financing1. Construction ContractSome of the more important terms of the construction contracts are Project Description- The construction contract should set forth a detailed description of all the Work necessary to complete the project Price:- Most project financing construction contracts are fixedprice contracts although some projects may be built on a costplus basis. If the contract is not fixed-price, additional debt or necessary to complete the equity contributions may be

project, and the project agreements should clearly indicate the party or parties responsible for such contributions. Payment- Payments typically are made on a "milestone" or "completed work" basis, with a retain age. This payment procedure provides an incentive for the contractor to keep on

KLESs Institute of Management Studies and Research 31

STATE BANK OF INDIA Project Financing

.
schedule and useful monitoring lender. points for the owner and the

Completion Date- The construction completion date, together with any time extensions resulting from an event of force majeure, must be consistent with the parties' obligations under the other project documents. If construction is not finished by the completion date, the contractor typically is required to pay liquidated damages to cover debt service for each day until the project is completed. If construction is completed early, the contractor frequently is entitled to an early completion bonus. Performance Guarantees- The contractor typically will guarantee that the project will be able to meet certain performance standards when completed. Such standards must be set at levels to assure that the project will generate sufficient revenues for debt service, operating costs and a return on equity. Such guarantees are measured by performance tests conducted by the contractor at the end of construction. If the project does not meet the guaranteed levels of performance, the contractor typically is required to make liquidated damages payments to the sponsor. If project performance exceeds the guaranteed minimum levels, the contractor may be entitled to bonus payments. 2. Feedstock Supply Agreements. The project company will enter into one or more feedstock supply agreements for the supply of raw materials, energy or other resources over the life of the project. Frequently, feedstock supply agreements are structured on a "put-or-pay" basis, which means that the supplier must either

KLESs Institute of Management Studies and Research 32

STATE BANK OF INDIA Project Financing

supply the feedstock or pay the project company the difference in costs incurred in obtaining the feedstock from another source. The price provisions of feedstock supply agreements must assure that the cost of the feedstock is fixed within an acceptable range and consistent with the financial projections of the project. 3. Product off take Agreements. In a project financing, the product off take agreements represent the source of revenue for the project .Such agreements must be structured in a manner to provide the project company with sufficient revenue to pay its project debt obligations and all other costs of operating, maintaining and owning the project .Frequently,offtake agreements are structured on a "take-or-pay" basis, which means that the offtaker is obligated to pay for product on a regular basis whether or not the offtaker actually takes the product unless the product is unavailable due to a default by the project company. Like feedstock supply arrangements, offtake agreements frequently are on a fixed or scheduled price basis during the term of the project debt financing. 4. Operations and Maintenance Agreement The project company typically will enter into a long-term agreement for the day-to-day operation and maintenance of the project facilities with a company having the technical and financial expertise to operate the project in accordance with the cost and production specifications for the project. The operator may be an independent company, or it may be one of the sponsors . The operator typically will be paid a fixed compensation and may be entitled to bonus payments for extraordinary project performance

KLESs Institute of Management Studies and Research 33

STATE BANK OF INDIA Project Financing

and be required to pay liquidated damages for project performance below specified levels.

5. Loan and Security Agreement. The borrower in a project financing typically is the project company formed by the sponsor(s) to own the project. The loan agreement will set forth the basic terms of the loan and will contain general provisions relating to maturity, interest rate and fees. The typical project financing loan agreement also will contain yhr provisions such as1. Disbursement Controls. These frequently take the form of conditions precedent to each drawdown, requiring the borrower to present invoices, builders certificates or other evidence as to the need for and use of the funds. 2. Progress Reports.:- The lender may require periodic reports certified by an independent consultant on the status of construction progress. 3. Covenants Not to Amend:- The borrower will covenant not to amend or waive any of its rights under the construction, feedstock, off take, operations and maintenance, or other principal agreements without the consent of the lender. 4. Completion Covenants:-These require the borrower to complete the project in accordance with project plans and specifications and prohibit the borrower from materially altering the project plans without the consent of the lender.

KLESs Institute of Management Studies and Research 34

STATE BANK OF INDIA Project Financing

5. Dividend Restrictions. These covenants place restrictions on the payment of dividends or other distributions by the borrower until debt service obligations are satisfied. 6. Debt and Guarantee Restrictions. The borrower may be prohibited from incurring additional debt or from guaranteeing other obligations 7. Financial Covenants. Such covenants require the maintenance of working capital and liquidity ratios, debt service coverage ratios, debt service reserves and other financial ratios to protect the credit of the borrower. 8. Subordination. Lenders typically require other participants in the project to enter into a subordination agreement under which certain payments to such participants from the borrower under project agreements are restricted (either absolutely or partially) and made subordinate to the payment of debt service. 9. Security. The project loan typically will be secured by multiple forms of collateral, including:--- Mortgage on the project facilities and real property. Assignment of operating revenues. Pledge of bank deposits Assignment of any letters of credit or performance or completion bonds relating to the project. project under which borrower is the beneficiary. Liens on the borrower's personal property Assignment of insurance proceeds. Assignment of all project agreements Pledge of stock in project company or assignment of partnership interests.

KLESs Institute of Management Studies and Research 35

STATE BANK OF INDIA Project Financing

.
Assignment of any patents, trademarks or other intellectual property owned by the borrower.

6 Site Lease Agreement. The project company typically enters into longterm lease for the life of the project relating to the real property on which the project is to be located. Rental payments may be set in advance at a fixed rate or may be tied to project performance. 7.Insurance. The general categories of insurance available in connection with project financings are: 1. Standard Insurance- The following types of insurance typically are obtained for all project financings and cover the most common types of losses that a project may suffer. Property Damage, including transportation, fire and extended casualty. Boiler and Machinery. Comprehensive General Liability. Worker's Compensation. Automobile Liability and Physical Damage. Excess Liability. 2. Optional Insurance. The following types of insurance often are obtained in connection with a project financing. Coverages such as these are more expensive than standard insurance and require more tailoring to meet the specific needs of the project Business Interruption.

KLESs Institute of Management Studies and Research 36

STATE BANK OF INDIA Project Financing

Performance Bonds. Cost Overrun/Delayed Opening. Design Errors and Omissions System Performance (Efficiency). Pollution Liability.

Project Risks
Project finance is finance for a particular project, such as a mine, toll road, railway, pipeline, power station, ship, hospital or prison, which is repaid from the cash-flow of that project. Project finance is different from traditional forms of finance because the financier principally looks to the assets and revenue of the project in order to secure and service the loan. In contrast to an ordinary borrowing situation, in a project financing the financier usually has little or no recourse to the non-project assets of the borrower or the sponsors of the project. In this situation, the credit risk associated with the borrower is not as important as in an ordinary loan transaction; what is most important is the identification, analysis, allocation and management of every risk associated with the project.

KLESs Institute of Management Studies and Research 37

STATE BANK OF INDIA Project Financing

The following details shows the manner in which risks are approached by financiers in a project finance transaction. Such risk minimization lies at the heart of project finance. In a no recourse or limited recourse project financing, the risks for a financier are great. Since the loan can only be repaid when the project is operational, if a major part of the project fails, the financiers are likely to lose a substantial amount of money. The assets that remain are usually highly specialized and possibly in a remote location. If saleable, they may have little value outside the project. Therefore, it is not surprising that financiers, and their advisers, go to substantial efforts to ensure that the risks associated with the project are reduced or eliminated as far as possible. It is also not surprising that because of the risks involved, the cost of such finance is generally higher and it is more time consuming for such finance to be provided.

Risk minimization process Financiers are concerned with minimizing the dangers of any events which could have a negative impact on the financial performance of the project, in particular, events which could result in: 1) The project not being completed on time, on budget, or at all; 2) The project not operating at its full capacity; 3) The project failing to generate sufficient revenue to service the debt; or 4) The project prematurely coming to an end.

KLESs Institute of Management Studies and Research 38

STATE BANK OF INDIA Project Financing

The minimization of such risks involves a three step process. 1) The first step requires the identification and analysis of all the risks that may bear upon the project. 2) The second step is the allocation of those risks among the parties. 3) The last step involves the creation of mechanisms to manage the risks. If a risk to the financiers cannot be minimized, the financiers will need to build it into the interest rate margin for the loan. Step 1- Risk identification and analysisThe project sponsors will usually prepare a feasibility study, e.g. as to the construction and operation of a mine or pipeline. The financiers will carefully review the study and may engage independent expert consultants to supplement it. The matters of particular focus will be whether the costs of the project have been properly assessed and whether the cash-flow streams from the project are properly calculated. Some risks are analysed using financial models to determine the project's cash-flow and hence the ability of the project to meet repayment schedules. Different scenarios will be examined by adjusting economic variables such as inflation, interest rates, exchange rates and prices for the inputs and output of the project. Various classes of risk that may be identified in a project financing will be discussed below. Step2- Risk allocationOnce the risks are identified and analyzed, they are allocated by the parties through negotiation of the contractual framework. Ideally a risk should be allocated to the party who is the most appropriate to bear it (i.e. who is in the best position to manage, control and insure against it) and who has the financial capacity to bear it. It has been observed that financiers attempt to allocate uncontrollable risks widely and to ensure that each

KLESs Institute of Management Studies and Research 39

STATE BANK OF INDIA Project Financing

party has an interest in fixing such risks. Generally, commercial risks are sought to be allocated to the private sector and political risks to the state sector. Step3- Risk managementRisks must be also managed in order to minimise the possibility of the risk event occurring and to minimise its consequences if it does occur. Financiers need to ensure that the greater the risks that they bear, the more informed they are and the greater their control over the project. Since they take security over the entire project and must be prepared to step in and take it over if the borrower defaults. This requires the financiers to be involved in and monitor the project closely. Such risk management is facilitated by imposing reporting obligations on the borrower and controls over project accounts. Such measures may lead to tension between the flexibility desired by borrower and risk management mechanisms required by the financier.

Types of Risks
Basically different types of projects are posed to different risks. Similarly the risks mentioned below are related to this particular project. 1) Completion Risk-

KLESs Institute of Management Studies and Research 40

STATE BANK OF INDIA Project Financing

Completion risk allocation is a vital part of the risk allocation of any project. This phase carries the greatest risk for the financier. Construction carries the danger that the project will not be completed on time, on budget or at all because of technical, labour, and other construction difficulties. Such delays or cost increases may delay loan repayments and cause interest and debt to accumulate. They may also jeopardize contracts for the sale of the project's output and supply contacts for raw materials. Commonly employed mechanisms for minimizing completion risk before lending takes place include: (a) Obtaining completion guarantees requiring the sponsors to pay all debts and liquidated damages if completion does not occur by the required date; (b) Ensuring that sponsors have a significant financial interest in the success of the project so that they remain committed to it by insisting that sponsors inject equity into the project; (c) Requiring the project to be developed under fixed-price, fixed-time turnkey contracts by reputable and financially sound contractors whose performance is secured by performance bonds or guaranteed by third parties; and (d) Obtaining independent experts' reports on the design and construction of the project. Completion risk is managed during the loan period by methods such as making precompletion phase draw downs of further funds conditional on certificates being issued by independent experts to confirm that the construction is progressing as planned. 2) Operating RiskThese are general risks that may affect the cash-flow of the project by increasing the operating costs or affecting the project's capacity to continue to generate the quantity

KLESs Institute of Management Studies and Research 41

STATE BANK OF INDIA Project Financing

and quality of the planned output over the life of the project. Operating risks include, for example, the level of experience and resources of the operator, inefficiencies in operations or shortages in the supply of skilled labour. The usual way for minimising operating risks before lending takes place is to require the project to be operated by a reputable and financially sound operator whose performance is secured by performance bonds. Operating risks are managed during the loan period by requiring the provision of detailed reports on the operations of the project and by controlling cash-flows by requiring the proceeds of the sale of product to be paid into a tightly regulated proceeds account to ensure that funds are used for approved operating costs only. 3) Market RiskObviously, the loan can only be repaid if the product that is generated can be turned into cash. Market risk is the risk that a buyer cannot be found for the product at a price sufficient to provide adequate cash-flow to service the debt. The best mechanism for minimising market risk before lending takes place is an acceptable forward sales contact entered into with a financially sound purchaser. 4) Credit RiskThese are the risks associated with the sponsors or the borrowers themselves. The question is whether they have sufficient resources to manage the construction and operation of the project and to efficiently resolve any problems which may arise. Of course, credit risk is also important for the sponsors' completion guarantees. To minimise these risks, the financiers need to satisfy themselves that the participants in the project have the necessary human resources, experience in past projects of this nature and are financially strong (e.g. so that they can inject funds into an ailing project to save it). 5) Technical Risk-

KLESs Institute of Management Studies and Research 42

STATE BANK OF INDIA Project Financing

This is the risk of technical difficulties in the construction and operation of the project's plant and equipment, including latent defects. Financiers usually minimise this risk by preferring tried and tested technologies to new unproven technologies. Technical risk is also minimized before lending takes place by obtaining experts reports as to the proposed technology. Technical risks are managed during the loan period by requiring a maintenance retention account to be maintained to receive a proportion of cash-flows to cover future maintenance expenditure. 6) Regulatory or Approval RiskThese are risks that government licenses and approvals required to construct or operate the project will not be issued (or will only be issued subject to onerous conditions), or that the project will be subject to excessive taxation, royalty payments, or rigid requirements as to local supply or distribution. Such risks may be reduced by obtaining legal opinions confirming compliance with applicable laws and ensuring that any necessary approvals are a condition precedent to the draw down of funds.

Appraisal

KLESs Institute of Management Studies and Research 43

STATE BANK OF INDIA Project Financing

Project FinancingThe SBI has formed a dedicated Project Finance Strategic Business Unit to assess credit proposals from and extend term loans for large industrial and infrastructure projects. Apart from this, project term loans for medium sized projects and smaller clients are delivered through the CAG and the NBG. In general, project finance covers Greenfield industrial projects, capacity expansion at existing manufacturing units, construction ventures or other infrastructure projects. Capital intensive business expansion and diversification as well as replacement of equipment may be financed through the project term loans. Project finance is quite often channeled through special purpose vehicles and arranged against the future cash streams to emerge from the project.The loans are approved on the basis of strong in-house appraisal of the cost and viability of the ventures as well as the credit standing of promoters.

Project finance strategic business unitA one-stop-shop of financial services for new projects as well as expansion, diversification and modernization of existing projects in infrastructure and noninfrastructure sector. Expertise Being India's largest bank and with the rich experience gained over generation, SBI brings considerable expertise in engineering financial packages that address complex financial requirements.

KLESs Institute of Management Studies and Research 44

STATE BANK OF INDIA Project Financing

.
structured financial

Project Finance SBU is well equipped to provide a bouquet of Division of SBI and SBI Capital Markets Limited.

solutions with the support of the largest Treasury in India (i.e. SBI's), International The global presence as also the well spread domestic branch network of SBI ensures that the delivery of your project specific financial needs are totally taken care of. Lead role in many projects Allied roles such as security agent, monitoring/TRA agent etc. Synergy with SBI caps (exchange of leads, joint attempt in bidding for projects, joint syndication etc.). In a way, the two institutions are complimentary to each other. We have in house expertise (in appraising projects) in infrastructure sector as well as non-infrastructure sector. Some of the areas are as follows: Infrastructure sector: Infrastructure sector Road & urban infrastructure Power and utilities Oil & gas, other natural resources Ports and airports Telecommunications Non-Infrastructure sector Manufacturing: Cement, steel, mining, engineering, auto components, textiles, Pulp & papers, chemical & pharmaceuticals Services: Tourism & hospitality, educational Institutions, health industry Expertise

KLESs Institute of Management Studies and Research 45

STATE BANK OF INDIA Project Financing

Rupee term loan Foreign currency term loan/convertible bonds/GDR/ADR Debt advisory service Loan syndication Loan underwriting Deferred payment guarantee Other customized products i.e. receivables securitization, etc.

Why project finance SBU?


Since its inception in 1995 the Project Finance SBU has built-up a strong reputation for it's in-depth understanding of the infrastructure sector as well as non-infrastructure sector in India and we have the ability to provide tailor made financial solutions to meet the growing & diversified requirement for different levels of the project. The recent transactions undertaken by PF-SBU include a wide range of projects undertaken by the Indian corporate. EligibilityThe infrastructure wing of PF SBU deals with projects wherein: the project cost is more than Rs 100 Crores. The proposed share of SBI in the term loan is more than Rs.50 crores. In case of projects in Road sector alone, the cut off will be project cost of Rs.50 crores and SBI Term Loan Rs. 25 crores, respectively. The commercial wing of PF SBU deals with projects wherein:

The minimum project cost is Rs. 200 crores (Rs. 100 crores in respect of Services sector). The minimum proposed term commitment is of Rs. 50 crores from SBI.

KLESs Institute of Management Studies and Research 46

STATE BANK OF INDIA Project Financing

Process of sanctioning1) Proposal- The bank usually asks the firm to give the following details Nature of the proposal The purpose for which the term loan is required ( whether for expansion, modernization, diversification etc..) 2) Brief History- In case of an existing company essential particulars about its promoters, its incorporation, subsequent corporate growth to date, major developments or changes in management. 3) Past Performance- A summary of past performance in terms of licensed/installed or operating capacities, sales, operating capacities, and sales and net profit for the three years should be analyzed. The figures relating to sales and profitability should be analyzed to ascertain the trend during the 3 years. In sum, the companys past performance has to be assessed to study if there has been a steady improvement and growth record has been satisfactory. 4) Present financial position- The Companys audited balance sheets and profit and loss account have to be analyzed. If the latest audited balance sheet has more than 6 months old, a pro-forma balance sheet as on a recent date should be obtained and analysed. 5) Project- Here the technical feasibility and the financial feasibility of the project is studied. 6) Project implementation schedule- Examine the project implementation schedule with reference to Bar Chart or PERT/CPM chart(if proposed to be used by the company for monitoring the implementation of the project) and in the light of actual implementation schedules of similar project

KLESs Institute of Management Studies and Research 47

STATE BANK OF INDIA Project Financing

Pre sanction processAppraisal 1. Preliminary appraisalThe following aspects have to be examined if the proposal is to Financing a project Whether the project cost is prima facie acceptable. Debt and equity gearing proposed and whether acceptable Promoters ability to access capital market for debt/ equity support Whether critical aspects of project- demand, cost of production, profitability etc.are prima facie in order. After undertaking the preliminary examination of the proposal, the branch will arrive at a decision whether to support the request or not. If the branch finds the proposal acceptable, it will call for from the applicants, a comprehensive application in the prescribed pro-forma, along with a copy of project report, covering specific credit requirements of the company and other essential data/ information. The information among other things should include Organization setup with a list of board of directors and indicating the Qualifications, experience and competence of the key personnel in

KLESs Institute of Management Studies and Research 48

STATE BANK OF INDIA Project Financing

.
Production , purchase

Charge of the main functional areas e.g..

,Marketing and finance in other word brief on the managerial resource and whether these are compatible with the size and the scope of the proposed activity . Demand and supply projections based on the overall market prospects ogether with a copy of market research report . The report may comment on the geographic spread of the market where the unit proposes to operate, demand and share, competitive advantage arrangement. Current practices for the particular product or service especially relating to terms of credit sales, probability of bad debts. Estimates of sales cost of production and profitability. Projected profit and loss account and Balance Sheet for the operating years during currency r of the bank assistance. Branch should also obtain additionally Appraisal report from any other bank/financial institution in case appraisal has been done by them, NO Objection Certificate from term lenders if already financed by them and Report from Merchant bankers in case the company plans to access capital market, wherever necessary. In respect of existing concerns, in addition to the above particulars regarding the history of the concern, its past performance, present financial position, etc. Should also be called for. This data should be supplemented by supporting statements such as: supply gap , the competitors marketing of the applicant , proposed

KLESs Institute of Management Studies and Research 49

STATE BANK OF INDIA Project Financing

Audited profit and loss account and balance sheet for the past three years Details of existing borrowing arrangements, if any, Credit information reports from the existing bankers on the applicant company Financial statements and borrowing relationship of associate firms/group companies. 2. Detailed AppraisalThe viability of a project is examined to ascertain that the company would have the ability to service its loan and interest obligations out of cash accruals from the business. While appraising a project all the data/ information furnished by the borrower is counter checked and wherever possible, inter-firm and inter-industry comparisons should be made to establish their veracity. The appraisal of the new project could be broadly divided into the following sub heads Promoters track record; Types of fixed assets to be acquired; Technical feasibility Marketability Production process Management Time schedule Cost of project Sources of finance Commercial Profitability; Security and Margin

KLESs Institute of Management Studies and Research 50

STATE BANK OF INDIA Project Financing

Repayment period and debt service coverage; Funds Flows statement ;and Rates of return.

If the proposal involves financing of a new project, the commercial, economic and financial viability and other aspects are to be examined as indicated below Statutory clearance from various government depts/agencies License/ clearance /permits as applicable Details of sources of energy requirements, power, fuel etc.. Pollution control clearance Cost of project and source of finance Buildup of fixed assets. Arrangements proposed for raising debt and equity Capital structure Feasibility of arrangements to access capital market Feasibility of the projections/estimates of sales cost of production and profit covering the period of repayment. Break-even point in terms of sales value and percentage of installed capacity under a normal production year. Cash flows and fund flows Whether profitability is adequate to meet stipulated repayments with reference to Debt Service Coverage Ratio, Return on Investment. Industry profile and prospectus Critical factors of industry and whether the assessment of these and management plans in this regard are acceptable

KLESs Institute of Management Studies and Research 51

STATE BANK OF INDIA Project Financing

Technical feasibility with reference to report of technical consultants, if available Management quality, competence, track record Companys structure and systems. Also examine and comment on the status of approvals from other term lenders, project implementation schedule. A pre-sanction inspection of the project site or the factory should be carried out in the case of existing units. 3. Present relationship with the Bank: The banks also take into consideration the relationship of the firm or the customer with the banks. It takes into account the following aspects Credit Facilities now granted. Conduct of the existing accounts. Utilization of limits- FB & NFB. Occurrence of irregularities, if any. Frequency of irregularity i.e.; the number of times and the total number of days the account was irregular during the last twelve months. Repayment of term commitments. Compliance with requirements regarding submission of stock statements, Financial Follow-up Reports, renewal data, etc Stock turnover, realization of book debts. Value of accounts with breakup of income earned. Pro-rata share of non-fund and foreign exchange business. Concessions extended and value thereof. Compliance with other terms and conditions.

KLESs Institute of Management Studies and Research 52

STATE BANK OF INDIA Project Financing

Action taken on comments /observations contained in RBI inspection Reports. CO inspection and audit reports. Verification Audit Reports. Concurrent audit reports. Stock Audit Reports Spot Audit Reports. Long Form Audit Report (statutory Report). 4. Credit risk RatingDraw up rating for Working Capital and Term Finance. 5. Opinion Reports- Compile opinion Reports on the company, partners/ promoters and the proposed guarantors. 6. Existing charges on assets of the unit-If the company, report on search of charges with proposed guarantors. 7. Structure of facilities and Terms of Sanction-Fix terms and conditions for exposures proposed facility wise and overall: Limit for each facility- sub limits. Security- Primary & collateral, Guarantee. Margins- for each facility as applicable. Rate of interest. Rate of commission/exchange/other fees. Concessional facilities and value thereof. Repayment terms, where applicable.

KLESs Institute of Management Studies and Research 53

STATE BANK OF INDIA Project Financing

Other standard covenants. 8. Review of the proposal-Review of the proposal should be done covering Strengths and weaknesses of the exposure proposed Risk factors and steps proposed to mitigate themDeviations if any, proposed from usual norms of the bank and the reasons thereof. 9. Proposal for sanction- Prepare a draft in prescribed format with required back-up details and with recommendations for sanction.

SBI has presently financed the following Projects-

KLESs Institute of Management Studies and Research 54

STATE BANK OF INDIA Project Financing

.
Amt(in crores)

SL.NO Name Of The Project

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Hescom Manoj Jewellers Mahaveer developers. JTK Arihant appliances Shreyalaxmi properties Shri laxmi trading co. SL flow controls Hubli Cigarette center Mahindrakar Agencies Shri gopal industries Atul agencies Kashyap j. Majethia Shree meenaxi pharma Shree meenaxi medical agency Fine lab Shree engineers and process Swastik winding works

82.00 6.00 93.00 2.25 5.95 5.8 1.25 1.10 35 2.40 2.02 4.40 2.5 4.0 5.0 5.8 4.5

KLESs Institute of Management Studies and Research 55

STATE BANK OF INDIA Project Financing

The further part has been dealt with respect to the project of SL flow controls. Project in Brief

KLESs Institute of Management Studies and Research 56

STATE BANK OF INDIA Project Financing

.
M/S SL Flow Control 98/A, 2A1, Sri Laxmi Business house near Airport road Gokul road Hubli.

Name Address

Nature of Business Status Name of the promoter Cost of the project Employment potential

Manufacturing of industrial valves. Proprietary Concern. Sri Verendra.B.Koujalagi. Rs 221.41 lakhs 30 employees

Debt Service coverage ratio 2.08

Cost of the project


Cost of the project Building land Machinery Electrification Electricity Deposit Amount(Lakhs) 25.00 22.00 83.38 6.50 5.00

KLESs Institute of Management Studies and Research 57

STATE BANK OF INDIA Project Financing

Preliminary Expenses - Technical know how 5.00 - Personnel training 2.00 -Patterns 5.00 Net Working Captial Total

12.00 67.53 221.41

Means of finance
Amounts in lakhs

Term loan Working Captial loan Own Contribution Margin Money for working Capital Total

102.50 50.00 51.38 17.53 221.41

Financial analysis Ratio Analysis:An integral aspect of financial appraisal is financial analysis, which takes into account the financial features of a project, especially source of finance. Financial analysis helps to determine smooth operation of the project over its entire life cycle.

KLESs Institute of Management Studies and Research 58

STATE BANK OF INDIA Project Financing

The two major aspects of financial analysis are liquidity analysis and capital structure. For this purpose ratios are employed which reveal existing strengths and weakness of the project. 1) Liquidity ratios- Liquidity ratio or solvency ratios measure a projects ability to meet its current or short-term obligations when they become due. Liquidity is the pre-requisite for the very survival of a firm. A proper balance between the liquidity and profitability is required for efficient financial management. It reflects the short-term financial strength or solvency of the firm. Two ratios are calculated to measure liquidity, the current ratio and quick ratio. a) Current ratioThe current ratio is defined as the ratio of total current assets to total current liabilities. It is computed by, Current assets Current ratio Current liabilities

Particulars Current assets

2004 91.47

2005 101.7 2 127.6 6 0.767

2006 112.7 6 121.5 9 0.927

2007 128. 7 96.0 5 1.33 9

2008 145.25 80.09 1.8134

Current liabilities 144.3 Current ratio 2 0.634

KLESs Institute of Management Studies and Research 59

STATE BANK OF INDIA Project Financing

C urrent ratio 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 1.81 34 1.339 0.9 27 0.634 0.767

Current Ratio

3 Ye a rs

InterpretationIt is an indicator of the extent to which short term creditors are covered by assets that are expected to be converted to cash in a period corresponding to the maturity of claims. The ideal current ratio is 2:1. The firm current ratio indicate that the firm is in a position to meet its short term obligation because the ratio is in increasing trend , by observing the above table we can say that though the firm does not maintain ideal current ratio, it is still in a position to meet its current obligations. After clearing all the dues the firm is still in a position to maintain liquidity.

KLESs Institute of Management Studies and Research 60

STATE BANK OF INDIA Project Financing

.
It is a measure of liquidity calculated dividing current assets minus

b) Acid test or quick ratio-

inventory and prepaid expenses by current liabilities. Since inventories among current assets are not quite liquid (means not quickly converted into cash), the quick ratio excludes it. The quick ratio includes only assets, which can be readily converted into cash and constitutes a better test of liquidity. It is often called as quick quick ratio because it is a measurement of a firms ability to convert its assets quickly into cash in order to meet its current liabilities.

Particulars Quick assets

2004 60.47

2005 67.65 127.6 6 0.53

2006 75.28 121.5 9 0.62

2007 87.4 7 96.0 5 0.91 1

2008 99.9 80.09 1.247

Current liabilities 144.3 Current ratio 2 0.534

KLESs Institute of Management Studies and Research 61

STATE BANK OF INDIA Project Financing

.
Quick ratio

1.4 1.2 1 Quick Ratio 0.8 0.6 0.4 0.2 0 1 2 3 Ye a rs 4 0.534 0.53 0.62 0.911

1.247

InterpretationAcid test ratio is a rigorous measure of firms ability to service short term liabilities. The usefulness of the ratio lies in the fact that it is widely accepted as the best available test of liquidity position of a firm. Generally an acid test ratio of 1:1 is considered satisfactory as a firm can easily meet all its current claims. In the case of the above firm the quick ratio is in increasing trend by year on. So it shows that firm is capable of paying its quick short term obligations

2. Capital structure ratio


The long-term lenders/creditors would judge the soundness of a firm on the basis of the long term financial strength measured in terms of its ability to pay the interest regularly as well as repay the installment of the principal on due dates or in one lump sum at the

KLESs Institute of Management Studies and Research 62

STATE BANK OF INDIA Project Financing

time of maturity. The long term solvency of firm can be examined by using leverage or capital structure ratios. The leverage or capital structure ratios may be defined as financial ratios which throw light on the long term solvency of a firm as reflected in its ability to assure the long term lenders with regard to (i) periodic payment of interest during the period of the loan and (ii) repayment of the principal on maturity or in predetermined installments at due dates. a) Debt equity ratio- This ratio measures the long term or total debt to shareholders equity. This ratio reflects claims of creditors and shareholders against the assets of the firm. Debt Equity Ratio is given by: Long term debt Debt Equity Ratio = Shareholders equity

Particulars Debt

2004 82.0

2005 61.5 0 54.0 7 1.14

2006 41.0 0 56.8 8 0.72 1

2007 20.0 5 68.9 4 0.29 1

2008 0.00 84.49 0.00

0 Equity(Promoter contribution) 56.3 Debt equity ratio 8 1.45 4

KLESs Institute of Management Studies and Research 63

STATE BANK OF INDIA Project Financing

.
Debt equity ratio 1.6 1.4 1.2 1.454 1.14 0.721

Debt/Equity

1 0.8 0.6 0.4 0.2 0 1 2 3 Ye a rs 4 5

0.291 0

InterpretationThe debt equity ratio is an important tool of financial analysis to appraise the financial structure of the firm. The ratio reflects the relative contribution of creditors and owners of the business in its financing. A high ratio shows a large share of financing by the creditors of the firm; a low ratio implies the a smaller claim of the creditors. Debt Equity ratio indicates the margin of safety to the creditors. The debt-equity ratio is in decreasing and in 2008 it become nil, which implies that the owners are putting up relatively more money of their own.

3. Profitability ratios related to salesThese ratios are based on the premise that a firm should earn sufficient profit on each rupee of sales. If adequate profits are not earned on sales, there will be difficulty in meeting the operating expenses and no returns will be available to the owners.

KLESs Institute of Management Studies and Research 64

STATE BANK OF INDIA Project Financing

A. Net profit marginIt is also known as net margin. This measures the relationship between the net profits and sales of a firm. Depending on the concept of net profit employed. , this ratio can be computed as followsEarnings after tax Net Profit ratio = Net sales 100

Particulars Earnings after tax Net sales Net profit margin

2004 10.68 265.49 4.023 %

2005 17.82 292.04 6.102 %

2006 27.05 321.24 8.420 %

2007 35.56 353.36 10.06 %

2008 43.75 388.7 11.25%

Interpretation The net profit margin is indicative of managements ability to operate the business with sufficient success not only to recover from revenues of the period, the cost of services, the operating expenses and the cost of borrowed funds, but also to leave a margin of reasonable compensation to the owners for providing their capital at risk. A high profit

KLESs Institute of Management Studies and Research 65

STATE BANK OF INDIA Project Financing

margin would ensure the adequate return to the owners as well as enable the firm to withstand adverse economic conditions. A low net profit margin has the opposite implications. With respect to the above firm the net profit margin is increasing trend so it will show that the company is in good condition and the demand for the product is increasing.

4 . Profitability ratios related to InvestmentsReturn on InvestmentsReturn on investments measures the overall effectiveness of management in generating profits with its available assets. There are three different concepts of investments in financial literature: assets, capital employed and shareholders equity. Based on each of them, there are three broad categories of ROIs. They are I. Return on assets, II. Return on total capital employed.

Return on assetsThe profitability ratio is measured in terms of relationship between net profits and assets. The ROA may also be called profit-to-asset ratio. It can be computed as followsNet profit after tax Return on Assets = Average total assets 100

KLESs Institute of Management Studies and Research 66

STATE BANK OF INDIA Project Financing

.
2005 17.82 199.5 4 8.93% 2006 27.05 195.9 13.81 % 2007 35.56 200.54 17.73 % 2008 43.75 208.34 20.99%

Particulars 2004 Earnings after tax 10.68 Average total assets 208.39 ROA 5.125 %

ROA

5.13% 20.99% 8.93%

13.81% 17.73%

InterpretationReturn on assets employed is favorable. That means the firm is in a position to employ its assets in an efficient manner.

Return on Capital Employed-

KLESs Institute of Management Studies and Research 67

STATE BANK OF INDIA Project Financing

It is similar to ROI except in one respect. Here the profits are related to the total capital employed. The term capital employed refers to long term funds supplied by the lenders and owners of the firm. It is given by the formulaEBIT Return on Capital employed = Average total capital employed Particulars 2004 EBIT 34.82 total capital employed 203.3 ROCE 9 17.2% 2005 42.24 199.54 21.16 % 2006 52.66 195.90 28.92 % 2007 62.04 200.5 4 30.9% 2008 70.99 208.34 34.07% 100

ROCE 35.00% 30.00% 25.00% Returns 20.00% 15.00% 10.00% 5.00% 0.00% 1 2 Years 3 ROCE 4 5 21.16% 17.20% 28.92% 30.90%

34.07%

KLESs Institute of Management Studies and Research 68

STATE BANK OF INDIA Project Financing Interpretation:The capital employed basis provides a test of profitability related to the source of long term funds. The higher the ratio, the more efficient is the use of capital employed. From the above table we can say that the ROCE is quite high. Compared to previous years ratio. It is good for the company.

Repayment Period and debt service coverage A) Projections of performance and profitability
particulars A) Sales Less: Excise 2004 300.00 34.51 265.49 185.84 6.00 12.24 0.60 1.20 0.72 24.97 2.40 2005 330.00 37.96 292.04 204.42 6.60 13.46 0.66 1.32 0.79 19.10 2.40 2006 363.00 41.76 321.24 224.87 7.26 14.81 0.73 1.65 1.11 14.66 2.40 2007 399.30 45.94 353.36 247.35 7.99 16.29 0.80 2.48 1.55 11.30 2.40 2008 439.23 50.53 388.70 272.09 8.78 17.92 0.88 3.47 2.17 8.75 2.40

Net sales
B) cost of Production 1.Raw material consumed 2.Power & Fuel 3.Direct labor & wages 4.consumable stores 5.Repair & Maintenance 6.Othermanufacturingexpences 7.Depreciation 8.Preliminary expenses w/off

KLESs Institute of Management Studies and Research 69

STATE BANK OF INDIA Project Financing

.
233.47 0.00 4.50 229.47 36.02 12.80 6.75 19.55 1.20 15.27 4.58 10.69 24.97 35.66 248.76 4.50 4.78 248.78 43.56 10.03 6.75 16.78 1.32 25.45 7.64 17.82 19.10 36.92 267.49 4.78 5.14 267.13 54.11 7.26 6.75 14.01 1.45 38.65 11.59 27.05 14.66 41.72 290.16 5.14 5.58 289.72 63.64 4.50 6.75 11.25 1.60 50.80 15.24 35.56 11.30 46.86 316.46 5.58 6.09 315.96 72.74 1.73 6.75 8.48 1.76 62.51 18.75 43.75 8.75 52.5

Total Cost of Production


Add: Opening stock Less: Closing Stock D)Cost of goods sold E) Gross Profit (B-D) F) Interest on 1) Term Loan 2) Working Captial Total G) Selling, administration Exp H)Profit Before Taxation(E(F+G)) I) Provision for Taxation J) Profit after tax (H-I) K) Depreciation L) Net Cash accruals( J+K)

B) Projected Cash Flow Statement


SL.NO A) Particulars Sources of funds 1.Net profit before interest and tax 2. Depreciation 3.Promoters capital 4.own contribution towards 5.term loan 6.working capital loan 7.Sundry creditior 8.Amortisationofpreliminaryexpences Total: Application of funds 1. Buldings 2. Land 3.Macinary 4.Electrification 5.Electricity Deposit 2004 34.82 24.97 51.38 5.00 102.50 50.00 7.74 2.40 278.8 25.00 22.00 83.38 6.50 5.00 2005 42.24 19.10 2006 52.66 14.66 2007 62.04 11.30 2008 70.99 8.75

0.77 2.40 64.52

0.85 2.40 70.58

0.94 2.40 76.68

1.03 2.40 83.17

B)

KLESs Institute of Management Studies and Research 70

STATE BANK OF INDIA Project Financing

.
44.25 30.97 4.50 3.00 19.55 0.00 20.5 276.65 2.15 0.00 2.15 2.15 4.42 3.10 0.28 10.00 16.78 4.58 20.5 59.67 4.85 2,15 4.85 7.00 4.87 3.41 0.36 15.00 14.01 7.64 20.5 65.79 4.79 7.00 4.79 11.80 5.35 3.75 0.44 15.00 11.25 11.59 20.5 67.88 8.80 11.80 8.80 20.6 5.89 4.12 0.51 20.00 8.48 15.24 20.5 74.74 8.43 20.6 8.43 29.03

6.Preliminary Expenditure 6. Increase in receivables 7.incerase in stock of material 9.increase in stock of finished goods 10.Drawing/ Dividend 11.interest on loans 12.income tax 13.Repayment of term loans Total Surplus/deficit Opening Balance Add: surplus/ deficit Closing Balance

Projectd Balance Sheet


SL.NO Particulars A Captial & Liability Promoter captial Own contribution Less Drawings Equity Retained Earning 2004 0.00 56.38 3,00 53.38 10.69 64.07 82.00 7.74 50.00 4.58 203.3 9 Assets: Fixed assets land Electricity deposit Cash & Bank Balances 89.91 22.00 5.00 2.15 2005 64.07 0.00 10.00 54.07 17.82 71.88 61.50 8.52 50.00 7.64 199.5 4 70.81 22.00 5.00 7.00 2006 71.88 0.00 15.00 56.88 27.05 83.94 41.00 9.37 50.00 11.59 195.9 0 56.14 22.00 5.00 11.80 2007 83.94 0.00 15.00 68,94 35.56 104.4 9 20.50 10.31 50.00 15.24 200.5 4 44.84 22.00 5.00 20.6 36.09 22.00 5.00 29.03 2008 104.49 0.00 20.00 84.49 43.75 128.25 0.00 11.34 50.00 18.75 208.34

Term loan(Debt) Sundry creditors Working Captial loan Provision for tax Grand Total

KLESs Institute of Management Studies and Research 71

STATE BANK OF INDIA Project Financing

.
44.25 30.97 4.50 9.60 208.3 9 48.67 34.07 4.78 7.20 199.5 4 53.54 37.48 5.14 4.80 195.9 58.89 41.23 5.58 2.40 200.5 4 64.78 45.35 6.09 0.00 208.34

Receivables Stock of material Stock of finished goods Preliminary expences not w/off Grand Total

Debt Service Coverage Ratio:(DSCR)


It is considered a more comprehensive and apt measure to compute debt service capacity of firm. It provides the value in terms of the number of times the total debt service obligations consisting of interest and repayment of principal in installments are covered by the operating funds available after the payment of tax : earnings after taxes, EAT+interest+Depreciation+Other non cash expenditure like amortization. EAT+interest+Depreciation+Other Non cash expenditure DSCR = Installments

KLESs Institute of Management Studies and Research 72

STATE BANK OF INDIA Project Financing

year 200 4 200 5 200 6 200 7 200 8

Net profit for the Interest on term loan Repayment of term loan year 35.66 19.55 2005 36.9 2 20.5 1.80 20.5 2006 2007 20.5 41.7 46.8 2 6 20.5 20.5 20.5 2.03 2.29 20.5 20.5 2008 52.50 20.5 2.56

Particulars 2004 36.92 Net Cash Accruals 35.6 16.78 41.72 46.86 52.50 Instalment DSCR

6 14.01 20.5 1.74 11.25


8.48

KLESs Institute of Management Studies and Research 73

STATE BANK OF INDIA Project Financing

.
Debt service coverage Ratio

3 2.5 2 1.5 1 0.5 0 1 2 Years 3 DSCR 4 5 DSCR 1.74 1.8 2.03 2.29 2.56

Interpretation:The higher the ratio, the better it is, A ratio of less than one may be taken as a sign of long term solvency problem as it indicates that the firm does not generate enough cash internally to service debt. in general, lending financial institution consider 2:1 as satisfactory ratio. In this project DSCR is in increasing trend it shows that firm is able to meet its debt obligation.

Capital investment evaluation methods


Successful completion of a project mainly depends on the selection criteria adopted while choosing the project in the initial phases itself and the choice of a project must be

KLESs Institute of Management Studies and Research 74

STATE BANK OF INDIA Project Financing

based on a sound financial assessment and not based on impressions. Among the several criteria available for financial assessment of projects, Discounted Cash Flow (DCF) techniques are being widely used in both public and private sectors. Usually the basic criterion used in project appraisal is Internal Rate of Returns (IRR), which is the most popular DCF technique used in the country. However, in most of the projects of the projects , the actual returns are vastly different from the expected returns based on IRR, necessitating looking for alternative project appraisal criteria. Therefore, an attempt is made to analyse other alternative project appraisal methods available for catering to the requirements of vivid circumstances. Emphasis is given for DCF techniques as they were proved to be the best techniques for project appraisal all over the world. 1) Pay Back Period (PBP) Method: Pay back period is the minimum period required to cover the initial cost and a project with minimum PBP is acceptable in this model. This is a very useful tool to decide rapidly if it is worth to do a small investment by a local manager and also helps to reduce the risk of bad choices. But the basic economic principles involved in PBP method are not as reliable as the other methods like NPV etc. The most important drawback of PWP method is, it is insensitive to changes in timing with in the payback period and ignores the cash flows beyond the PBP. This method also lacks a natural bench mark against which comparisons can be made among various projects. Discounted PBP method gives a more accurate period to cover the initial cost but doesnt overcome the above drawbacks. However this is a very good method to use in combination with other methods. Year Cash Flows (in lakhs) Cumulative cash flows 200 35.66 35.66 4 200 5 36.92 72.58

KLESs Institute of Management 200 41.72 114.3 6 Studies and Research


200 7 200 8 46.86 52.50 161.16 213.66

75

STATE BANK OF INDIA Project Financing

Total cash outflow Pay Back Period = Annual cash inflow The recovery of the investment is in the 3rd year and 0.64 month. InterpretationThe Pay back period is a measure of liquidity of investments rather than their profitability. Since the period within which the total cost of the period is less than the completion period, the project can be accepted. It means that the firm will be able to pay the dues out of their inflows. Therefore the project is said to be feasible.

2. Average Rate of ReturnThe average rate of return (ARR) method of evaluating proposed capital expenditure is also known as the accounting rate of return method. It is also known as Return on Investment, as it uses the information revealed by financial statements, to measure the profitability of an investment. The accounting rate of return can be found out by dividing the average after-tax profit by the average investment. It is given by the formula-

KLESs Institute of Management Studies and Research 76

STATE BANK OF INDIA Project Financing

.
Average annual profit after tax

Average rate of return = Average investment 213.66/ 5 Average rate of return = 152.5/ 2 * 100

* 100

42.732 Average rate of return = 76.25 * 100

Average rate of return =

56.04%.

InterpretationHere the ARR is more consistent as the ARR is quite higher ( more than average) and the project can be accepted.

KLESs Institute of Management Studies and Research 77

STATE BANK OF INDIA Project Financing

3. Net Present valueIt is calculated by discounting the future cash flows of the project to the present value with the required rate of return to finance the cost of capital. A project is acceptable if the capital value of the project is less than or equal to the net present value of cash flows over the operating life cycle of the project. This method is highly useful when selection has to be made among many projects, which are mutually exclusive, and there are no budgetary constraints. Selection of projects with the largest positive NPV will yield highest returns. But this method is useful only to determine whether a project is acceptable or not but doesnt indicate which project is best under budgetary constraints. It is difficult to rank different compatible projects with NPV as there is no account for scale of investment while calculating NPV. InterpretationYear 1 2 3 4 5 Total PV Less- Initial outlay Net Present Value Cash Flows(lakhs) 35.66 36.92 41.72 46.86 52.50 PV factor @10% 0.909 0.826 0.751 0.683 0.621 Total present value 32.414 30.495 31.290 32.005 32.603 158.807 152.5 6.307

The acceptance rule using NPV method is to accept the investment proposal if its net present value is positive (NPV > 0) and to reject it if the NPV is negative (NPV<0). Positive NPVs contribute to the net wealth of the shareholders which should result in the increased price of a firms share. The positive net present value will result only if the project generates cash inflows at a rate higher than the opportunity cost of capital . Since the Net Present Value of the above project is positive, the proposal can be accepted.

KLESs Institute of Management Studies and Research 78

STATE BANK OF INDIA Project Financing

4 . Profitability IndexIt is also known as Benefit Cost Ratio. It is similar to NPV approach. The profitability index approach measures the present value of returns per rupee invested, While the NPV is based on the difference between the present value of the future cash inflows and the present value of cash outlays. It may be defined as the ratio which is obtained dividing the present value of cash inflows by the present value of cash outlays. It is given by the formula: Present value of cash inflows Profitabillity Index = Present value of cash outflows 158.807 Profitabillity Index = 152.5 Profitability Index = InterpretationUsing the profitability index, a project will qualify for acceptance if its PI exceeds one (PI>1). When PI is greater than or equal to or less than 1, the net present value is greater than or equal to or less than zero respectively. Since the Profitability Index of the above project shows the PI greater than 1 and hence the project should be accepted. 1.041

5. Internal Rate of Return-

KLESs Institute of Management Studies and Research 79

STATE BANK OF INDIA Project Financing

It is the rate of return at which the Net Present Value (NPV) of a project becomes zero. A project is acceptable if the IRR exceeds the cost of capital. It is possible to rank various compatible projects with IRR method and a project with highest IRR can be selected. However, this method is not useful when selection has to be made among mutually exclusive projects. This method assumes that the net cash flows from a project are first negative and then positive for the rest of the project life and vice versa. But this condition is not always fulfilled resulting in multiple IRRs for the same project. Due to ambiguous results, project selection becomes difficult. Further, selection of a project based on highest IRR alone, without taking project specific risk factors into consideration, may be often misleading.

Year 1 2 3 4 5 Total

Cash flows 35.66 36.92 41.72 46.86 52.50

Weights 5 4 3 2 1 15 597.36

Weighted average CFs 178.3 147.68 125.16 93.72 52.5 597.36

Weighted Average Cost = 15 = Pay Back Period = Weighted average cost 152.5 Pay Back Period = 39.824 Initial Investment

KLESs Institute of Management Studies and Research 80

STATE BANK OF INDIA Project Financing

.
39.824 = 3.8 years

Pay back period A) Year 1 2 3 4 5 Total PV Less- Initial outlay Net Present Value -

CashFlows(lakhs) 35.66 36.92 41.72 46.86 52.50

PV factor @10% 0.909 0.826 0.751 0.683 0.621 -

present value 32.414 30.495 31.290 32.005 32.603 158.807 152.5 6.307

B) Year 1 2 3 4 5 Total PV Less- Initial outlay Net Present Value

Cash flows 35.66 36.92 41.72 46.86 52.50

PV factor @ 12% 0.893 0.797 0.712 0.636 0.567

Present value 31.84 29.43 29.70 29.80 29.76 150.53 152.53 -1.97

KLESs Institute of Management Studies and Research 81

STATE BANK OF INDIA Project Financing

.
L+ A- B 6.307 {H-L}

Internal rate of return =

Internal rate of return =

10 + 6.307-1.97 6.307

(12-10)

Internal rate of return =

10+ 4.337

{2}

Internal rate of return = Internal rate of return = Interpretation-

10 + 2.908 12.91%

Since the expected rate of return is 10% so the project is said to be accepted.

Measures taken by SBI when the repayment is not possible


2) Firstly they send a notice to the clients stating therein to pay their dues. 3) When there no improvements in the repayments even after the notice being sent then the bank will forward the legal notice stating the clients to make payments 4) Third is the compromise dealing wherein both the parties sit together and decide what measures has to be taken which means whether the clients make the payments, or whether to file a suit or decide to sell the Properties etc..

KLESs Institute of Management Studies and Research 82

STATE BANK OF INDIA Project Financing

Analysis:This analysis part is related to the financial viability of the project SL Flow Controls:-

KLESs Institute of Management Studies and Research 83

STATE BANK OF INDIA Project Financing

Through ratio analysis I analyzed that the liquidity position of the firm is good and it is maintaining the standard ratio.. Debt Equity ratio is in decreasing trend, it shows that the firm is reducing its liability portion by paying the loan year on year so the financial risk less. Profitability ratios related to sales and capital employed are in increasing trend, it shows that the sales are increasing and the firm using its resources efficiently.

Debt Service Coverage Ratio is also in increasing trend, it shows that the firms ability to make the loan repayments on time over the debt life of the project.

The payback period is within the debt life of the project. The net present value of the project is positive, The positive net present value will result only if the project generates cash inflows at a rate higher than the opportunity cost of capital . Since the Net Present Value of the above project is positive, the proposal can be accepted.

The internal rate of the return is higher than what accepted so the project is accepted.

Findings :- These are related to bank in general

KLESs Institute of Management Studies and Research 84

STATE BANK OF INDIA Project Financing

State bank of India is strictly following the guidelines of RBI on Project Financing Sanctioning for the projects is approved by RASMECC (Retailed Assets Small And Medium Enterprises Credit Cell). The bank finances the projects only through term loans. Interest rates are fixed depending upon the projects which is known as State Bank advance rate. When the clients fail to pay the interest, 3 months from the due date the term loan granted will be treated as Non Performing Assets. If the interest is due further 3 more months then it will be treated as doubtful assets and interest rates becomes zero. Again for further 3 months it goes as loss assets and the bank write off the account. Every firm starting up a new project should make an insurance policy with the same bank itself.

Recommendations: Bank check only financial, technical and commercial feasibility of the project and it should not consider sensitivity analysis and social cost benefit analysis of the project so bank should consider this because these are also important from the point of view of risk and economy growth. Bank should be caution about the availability of security and ensure honesty of both borrower and guarantor so as to avoid the account becoming the loss assets.

Limitation of the study:-

KLESs Institute of Management Studies and Research 85

STATE BANK OF INDIA Project Financing

Some of the information are confidential in nature that could not divulged for study.

Conclusion:The project undertaken has helped a lot in understanding the concept of project financing in nationalized bank with reference to state bank of India. The project financing is an important aspect which helps in increasing the profit of the banks. Project financing is a vast subject and it is very difficult to apply all the aspect in all type of project when bank want to finance, and it is very difficult to cover all aspect in this project. To sum up it would not be out of way to mention here that the state bank of India has given a special impetus on Project Financing .the concerted efforts of the management and staff of state bank of India has helped the bank in achieving remarkable progress in almost all important aspects. Finally the success of project financing would mostly depend on the proper analysis of the projects before financing.

KLESs Institute of Management Studies and Research 86

STATE BANK OF INDIA Project Financing

Bibliography
The data is collected from the list of books and web site given below www.sbi.com. www.Google.com Company manuals. Commercial Banks Book. Project financing by Machiraju Financial management by Khan and Jain.

KLESs Institute of Management Studies and Research 87

You might also like