You are on page 1of 3

GEMINI PATTERN EDITOR

Special functions keys (1)


Moving a point by mouse drag:
CTRL SHIFT ALT CTRL ALT - It will limit the point movement to vertical or horizontal direction to its own first position. - The point will be moved along one of the contour segment on which the point will be located. - The point will be overlaped with other points. - The piece will be moved to vertical or horizontal direction to its own first position. - The piece can be overlaped point by point with another piece - The piece can be free resized when you drag by mouse the resizing points. - To multiply the base size you must drag the resing points with a distance that equals the double or triple base size. -The next drawn segment can be rotated only on fixed angles (0,15, 30, 45,...90..180..270) from the workspace coordinates. - The next drawn segment can be rotated only on fixed angles (0,15, 30, 45,...90..180..270) from the previous line. - The next drawn point can be overlaped on the existing points on other pieces.

Moving a pice by mouse drag:

Resizing a piece by mouse drag:


SHIFT CTRL CTRL

Free drow by mouse drag:


SHIFT ALT

Rotate a piece by mouse: CTRL - The rotation of the piece can be made with an exact angle. The rotation step will be of 15 degrees. ALT - The rotation center will be overlaped on anothers points of the piece.
(c) Copyright 2001 - 2007 Venus Technologies Provider -- ITN 0001 Rev. 12.2007

When you move the rotation center of the piece by mouse drag:l

CTRL+ALT - Unlike the overleaping only by ALT key, in these case the overlaping will be made in a point where two pieces intersects.
CAD SYSTEMS

GEMINI PATTERN EDITOR


Special functions keys (2)
When you move a point using keyboard arrows
CTRL- The movement step up, down, left, right of the point will be by 1mm, unlike 1cm when CTRL key is not pressed down.

When you move a piece using keyboard arrows

CTRL- The movement step up, down, left, right of the piece will be by 1mm, unlike 1cm when CTRL key is not pressed down.

When you modify grading using keyboard arrows

CTRL-On each press will be increasing or decreasing the grading step by 0.1 mm unlike, 1mm when you are not using it.

When you measure straight


CTRL - After select the starting point of measurement, if you press CTRL key the measurement can be precise directed from 15 to 15 degree

SHIFT-ALT - the lastest measurement will be decreased from the perevious one; hold down the keys only when starting the
measurement.

CAD SYSTEMS

(c) Copyright 2001 - 2007 Venus Technologies Provider -- ITN 0002 Rev. 12.2007

How to make composed measurements SHIFT - the lastest measurement value will be added to the previous

one, keep shift pressed only when staring the measurement to be cumulated.

GEMINI PATTERN EDITOR


Special functions keys (3)
.

Short key combination for zoom: F2 - zoom in F3 - zoom out - zoom to selected pieces F4 - zoom to the entire model F5 Useful keys combination:
CTRL-C CTRL-V CTRL-D CTRL-F

- copy selected pieces in piece tool mode - paste copied pieces in piece tool mode - duplicate selected pieces in piece tool mode - memorize the grading rule from the selected point in grading tool mode CTRL-G -the memorized grading rule will be copied on the selected point in grading tool mode SHIFT+ click with mouse on a selected piece or point -permits to select conecutively multiple pieces one by one or multiple points.

Anchor to the Geometrical Layer:

SHIFT- ALT - permits to anchor a point to the geometrical layer in Shape or Draw tool mode.
(c) Copyright 2001 - 2007 Venus Technologies Provider -- ITN 0002 Rev. 12.2007

Parametrical design mode:

SHIFT - the geometrical point will be placed in the current mouse position.

CAD SYSTEMS

You might also like