Professional Documents
Culture Documents
Accessories
Torches
Ordering information
Complete torch kits: EQ-TO-KIT-BN60-EU (BN60 nozzle, Handle, 10M Hose, EU regulator)
EQ-TO-KIT-BN80-EU (BN80 nozzle, Handle, 10M Hose, EU regulator) EQ-TO-KIT-BN60-US (BN60 nozzle, Handle, 10M Hose, US regulator)
EQ-TO-NOZZLE-BN80 EQ-TO-NOZZLE-BN60
EQ-TO-NOZZLE-BN40
R 3/8 RH
EQ-TO-HANDLE-PILOT
EQ-TO-HOSE-4M or EQ-TO-HOSE-10M
EQ-TO-HAN
3/8 LH
W 20.0 -14LH
W 21.8 -14LH
p 1 of 4
DS-ACCESSORIES-REV-6-0309
Installation equipment
Ordering information roller: EQ-ROLLER-FLATtemperature pyrometer: RM-PYROMETER + surface contact probe: RM-ROLLER-PROBE-SENSOR
SILICON
plastic scraper for bevelling mill coating: EQ-PE-SCRAPER + replacement blade: EQ-PE-BLADE
EQ-REUSABLE-PLUG
EQ-FOPS-PLUG-DRILL-25
EQ-PRESS-FOPS
EQ-FOPS-PLUG-DRILL-25
Miscellaneous
Ordering information heatshield for line coating: EQ-HEAT-SHIELD150x3x25M working globes EQ-GLOVES-PAIR
p 2 of 4
DS-ACCESSORIES-REV-6-0309
Primer equipment
Ordering information
Epoxy primer S1239, S1301-M, S1401 Primer is available in bulk packages and in small kits
Special: S1401-KIT-0.5L-0.13GAL/WA (C10) This kit contains only part A and part B epoxy, accessories should be ordered spererately.
1 ltr of mixed bulk primer covers a minimum of 6.7 m2 (72 square feet) surface. When using bulk epoxy primer, it is necessary to order primer pumpsets and applicator pads seperately. Applicator pad kits are available and these contain 100 pads, 100 mixing cups and 100 gloves: EQ-PR-APPLICATOR-KIT-100. For S1401 epoxy it is recommended to use the applicator with felt (EQ-PR-APPLICATOR-3), available in a kit with 100 gloves, 100 mixing cups and 100 sticks: RM-BULK-ACCESSORIES-KIT
p 3 of 4
Primer equipment
Ordering information EQ-PR-APPLICATOR-KIT-100: 100 applicators, sticks, cups and gloves primer applicator pad: EQ-PR-APPLICATOR primer mixing stick: EQ-PR-MIXING STICK primer mixing cup: EQ-PR-CUP-460 primer safety gloves: EQ-PR-GLOVES
primer pump S1301-M primer: EQ-PR-S1301-M-PUMP-A EQ-PR-S1301-M-PUMP-B primer pump S1239 primer: EQ-PR-S1239-PUMP2-A EQ-PR-S1239-PUMP2-A EQ-PR-S1401-PUMP2-A EQ-PR-S1401-PUMP2-B
Berry Plastics warrants that the product conforms to its chemical and physical description and is appropriate for the use stated on the technical data sheet when used in compliance with Berry Plastics written instructions. Since many installation factors are beyond the control of Berry Plastics, the user shall determine the suitability of the products for the intended use and assume all risks and liabilities in connection herewith. Berry Plastics liability is stated in the standard terms and conditions of sale. Berry Plastics makes no other warranty either expressed or implied. All information contained in this technical data sheet is to be used as a guide and is subject to change without notice. This technical data sheet supersedes all previous data sheets on this product.
www.berrycpg.com
Headquarters : Berry Plastics Tapes & Coatings Division, Franklin MA, USA Franklin, MA, USA Tel: +1 508 918 1714 US Toll Free: +1 800 248 0149 Fax: +1 508 918 1910 CPG@berryplastics.com Houston, TX, USA Tel: +1 713 676 0085 US Toll Free: 01 888 676 7202 Fax:+1 713 676 0086 CPGH@berryplastics.com Tijuana, Mexico Tel USA +1 858 633 9797 Fax US: +1 858 633 9740 Tel Mexico: +52 664 647 4397 Fax Mexico: +52 664 647 4370 CPGTJ@berryplastics.com Aarschot, Belgium Tel: +32 16 55 36 00 Fax: +32 16 55 36 74 CPGE@berryplastics.com Baroda, India Tel: +91 2667 264721 Fax: +91 2667 264724 CPGIN@berryplastics.com
p 4 of 4
DS-ACCESSORIES-REV-6-0309