You are on page 1of 16

Foundry, Kansbahal Works, Odisha, India

ISO 9001 ISO 14001 ISO 18001 Certified

Ferrous Foundry Market segments:


Thermal Power Cement Material Handling Mining Mineral Processing Steel Paper

Competitive advantages:
Availability of trained and competent people. Equipped with casting, heat treatment, finishing and all necessary testing & inspection facilities. Use of simulation software for design of castings resulting in reduced development time. Dedicated sub-contractors for pattern making, machining & fettling activities.
1

Foundry, Kansbahal Works, Odisha, India

Location
Kansbahal is located in Odisha,
which is in the eastern part of India

Well connected by road & rail


International airport 430 kms Nearest sea port 430 kms

Kansbahal

Foundry, Kansbahal Works, Odisha, India

Facilities & Capabilities


Covered area: Metallurgies: Casting range:
19250 sq. m Alloy Iron, SG / Cast Iron,

Low Alloy / Plain Carbon Steel


12T in Steel, 15T in Alloy Iron, 22T in SG/Cast Iron ISO: 9001-2008, ISO: 14001-2004 & OHSAS 18001-2007 (Certified by DNV) Lloyds Register of Shipping, London Central Boiler Board TUV

Accreditation:

Foundry, Kansbahal Works, Odisha, India

Facilities & Capabilities


Moulding
Moulding sand system: Continuous sand mixers: Sand reclamation type: Dust extraction system: No-bake resin 3 nos. @ 30MT/hr Mechanical Available Continuous Sand Mixer

Melting
Induction furnaces: 2 MT - 1 no. 4 MT - 2 nos. 6 MT - 2 nos.
Holding furnace: Liquid metal: 16 MT - 1 no. 30 MT
4

Foundry, Kansbahal Works, Odisha, India

Facilities & Capabilities


Heat Treatment
Electrical resistance type furnace: 4x1.5m, 10MT 2.5x1.5m, 4MT, 2 nos. 2.6x1.5x0.6m, 3MT Oil-fired type furnace: 6x4x2.7m, 25MT 3x3x1.5m, 5MT Continuous Sand Mixer

Technology
MAGMA simulation software

Pro-E 3D modeling software


Autodesk Inventor design & modeling software
5

Foundry, Kansbahal Works, Odisha, India

Facilities & Capabilities


Testing & Inspection
Chemical analysis: Spectrometer, photometer Microstructure analysis: Image analyzer NDT: Ultrasonic, MP & DP testing by Level-3 qualified personnel Mechanical testing: UTM, Hardness & Impact testing machines Dimensional testing: Micrometers & other gauges for dimensional inspection
UTM Image Analyzer Spectrometer

Foundry, Kansbahal Works, Odisha, India

Product Profile
Grinding Rings & Balls
Application: Coal pulverizing Weight/set: 9MT for EL76 size to 51MT for 12E10

Material: Rings Alloy Iron, Balls Steel / Alloy Iron

Grinding Ring

Grinding Rings & Balls

Grinding Balls
7

Foundry, Kansbahal Works, Odisha, India

Product Profile
Tyres & Table Liners
Application: Coal, raw meal & clinker grinding Material: Alloy Iron

Weight: Tyres up to 12MT/pc & Table Liners up to 30MT/set

Table Liner

Table Liner Tyre


8

Foundry, Kansbahal Works, Odisha, India

Product Profile
Coiler Mandrel
Application: Hot rolling (Steckel mill) Unit Weight: Up to 10MT Material: Heat resistant steel

Finish-machined Coiler Mandrel

Raw Casting

Foundry, Kansbahal Works, Odisha, India

Product Profile
SG Iron Castings
Application: Grinding mill / general engineering Unit Weight: Up to 22MT

Rack Segments

Pump Casing Rocker Arm & Fork Assembly


10

Foundry, Kansbahal Works, Odisha, India

Product Profile
Crusher Components
Application: Crushing & material handling Unit Weight: Up to 8MT Material: Steel / Cast Iron Impact Arm

Pulley

Tooth Roll

Backing Strip
11

Foundry, Kansbahal Works, Odisha, India

Product Profile

Cylinder Covers

Cylinder Shell (Up to 1806)

Components for Paper Machines


Application: Paper production Unit Weight: Up to 15MT Material: Cast Iron / SG Iron

Cylinder Journal
12

Our Valued Clients


Grinding Rings & Balls

Cement

Special Castings

Foundry, Kansbahal Works, Odisha, India

Thank You

16

You might also like