Professional Documents
Culture Documents
A min 34
r
m
1.4
n
1)
r
m
1.7
n
m
0.2
r
m
1.9
n
m
0.21
1)
No change versus DX 54 D +Z
TK Steel
Division Auto Vertrieb/Engineering
Product information Deep-drawing steels Updated: September 2008 Page 5 of 17
TK Steel
Division Auto Vertrieb/Engineering
Coating
Deep-drawing steels from ThyssenKrupp Steel are available with the following
high-quality coatings:
Surface quality
Hot rolled deep-drawing steels are supplied in accordance with EN 10111 or based on surface
quality A for cold rolled.
The cold rolled uncoated and electrolytically coated grades are supplied in surface qualities A and
B for inner and outer parts.
The hot-dip coated grades are supplied in surface qualities B and C in finishes M (small spangle)
and R (zinc-iron alloy). A coating weight of 100 g/m
2
is recommended. Higher coating weights are
also available by arrangement for inner parts exposed to particularly corrosive conditions.
Steel grade
Coating
U ZE ZN Z ZF ZA AS KSP
DD 11 S
DD 12 S
DD 13 S
DD 14 S
DX 51 D S
4)
S S S
DX 52 D S
4)
S S S
DX 53 D S
4)
S S S
DX 54 D S S S S
DX 55 D S
DX 56 D S S A S
DX 57 D S A A A
DC 01 S S S S
DC 03 S S S S
DC 04 S S S S
DC 05 S S S S
DC 06 S S S S
DC 07 S S A A
S: Volume production in surface quality A or B (inner parts)
S: Volume production in surface quality B or C (outer skint)
A: On request
4)
Also available as hot-rolled sheet in coating Z
U: Uncoated Z: Hot-dip galvanized ZE: Electrolytically galvanized
ZF: Galvannealed ZN: Electrolytically zinc-nickel coated
ZA: Zinc-aluminum coated GALFAN