Professional Documents
Culture Documents
MO Parameter ID Parameter Name NE MML Command Meaning IsKey Mandatory Feature ID Feature Name Value Type UFRC UlPttTransModeOnHsupa PTT traffic transmission mode on HSUPA BSC6900 SET UFRC E-DCH data transfer mode of PTT services. It is valid only when PTT services are mapped onto the E-DCH. NO NO WRFD-010632 Streaming Traffic Class on HSUPA Enumeration Type
GUI Value Range SCHEDULED, NON-SCHEDULED Enumeration Number/Bit Unit Actual Value Range Default Value Recommended Value Initial Value Source Impact Parameter Relationship Access SCHEDULED~0, NON-SCHEDULED~1 None SCHEDULED, NON-SCHEDULED NON-SCHEDULED NON-SCHEDULED Radio Planning (Internal planning) RNC None Read & Write
No (And no impact on the UE in idle mode) Service Interrupted After Modification Interruption Scope N/A
Interruption Duration(Min) Caution Validation of Modification Impact on Radio Network Performance Introduced in Version Attribute
N/A None The parameter modification has no impact on the equipment. None
BeHsupa2msTtiRateThs
MO Parameter ID Parameter Name NE MML Command Meaning UFRC BeHsupa2msTtiRateThs Rate threshold of BE on 2ms TTI of HSUPA BSC6900 SET UFRC This parameter specifies the rate threshold of 2ms TTI on the E-DCH for HSUPA BE service. When the cell capability and UE capability allows 2ms TTI, 2ms TTI on the E-DCH is used if the PS BE service carried on HSUPA with uplink rate isn't less than this threshold. Otherwise, 10ms TTI is used. NO NO WRFD-01061206 WRFD-01061403 Feature Name Interactive and Background Traffic Class on HSUPA
GUI Value Range D8, D16, D32, D64, D128, D144, D256, D384, D608, D1280, D2048, D2720 Enumeration Number/Bit Unit Actual Value Range Default Value Recommended Value Initial Value Source Impact Parameter Relationship Access D8~1, D16~2, D32~3, D64~4, D128~5, D144~6, D256~7, D384~8, D608~10, D1280~13, D2048~16, D2720~17 kbit/s 8, 16, 32, 64, 128, 144, 256, 384, 608, 1280, 2048, 2720 D1280 D1280 Radio Planning (Internal planning) RNC None Read & Write
No (And no impact on the UE in idle mode) Service Interrupted After Modification Interruption Scope N/A Interruption Duration(Min) Caution N/A The value of this parameter can take effect only when the following condition is met: (("RatioFor10msTo2ms"("SET UEDCHTTIRECFG") / 100) x "BeHsupa2msTtiRateThs") > ("E2DThrou4BThd"("SET UDCCC") x 10 x 1000). The parameter modification has no impact on the equipment. None
Attribute
Radio