You are on page 1of 52

Product Overview

Sensors, Transmitters and Controllers


894498 / 09/09 www.wolf-corporate.de

Brkert Fluid Control Systems Christian-Brkert-Strae 13-17 74653 Ingelfingen Germany Tel. +49 (0) 7940/10-0 Fax +49 (0) 7940/10-91 204 info@burkert.com www.burkert.com

01

02

03

04

05

06

07

S O L E N O I D C O N T R O L VA LV E S

M A S S F LO W C O N T R O L L E R S

S O L E N O I D VA LV E S

P R O C E S S VA LV E S

MICROFLUIDICS

P N E U M AT I C S

Introduction

The Complete Control Loop Market Leader


Across thousands of individual solutions and spanning dynamic conditions of global competition our mission is to work towards your success. We have decades of global experience and we have always been positioned at the forefront of sensor technology. Our innovative approach to your success is to secure your process efficiency, lower your downtime, increase your safety and boost your competitive advantage. We intend to collaborate with you where we can share our 3 4 6 8 10 48 58 68 82 88 92 100 102 Introduction Fascination Brkert Brkert Provides Process Vision Overview Sensor Solutions Flow, Batch and Ratio Level pH/ORP Conductivity Pressure Temperature Transmitters and Controllers Added Value Systems Contacts at Brkert Everyone in our organization is interested in listening to you with the aim of presenting you with only the most appropriate solution fluently in your daily application language. All of our combined knowledge is available to you through consultation, engineering support, selection and commissioning. control loop experience.

Content

Fascination Brkert

Welcome to the Fascinating World of Fluid Control Systems


Measurement and control: When it comes to working with liquids and gases, we are at your side as a manufacturer of sophisticated products, as a problem-solver with an eye for the big picture, and as a partner offering you reliable advice. Since we started in 1946, we have developed into one of the worlds leading suppliers of Fluid Control Systems. At the same time we have kept our status as a family-owned business with a foundation of strong basic values to highlight the way we think and act.

Brkert Product Program

We are one of the few suppliers on the market to cover the complete control loop. Our current product range extends from solenoid valves through process and analytical valves to pneumatic actuators and sensors.

Experience
There are things which are not inherently yours. You have to gather them bit by bit. You receive them from others. And you constantly have to acquire them anew. That is what makes them so valuable. Experience is one of those things. For instance, because of our many years of experience with metering, controlling and analysing of fluids, we can provide our extensive services to you from consulting, development, and 3D CAD simulating to testing and after-sales service. Whether individual product solutions or a pioneering new system for the entire control process: Benefit from our experience!

COURAGE
Those who only work toward optimizing things that already exist will eventually reach the limits technically, financially, or personally. In order to overcome these limits, courage is needed: The courage to be different and trust ones own ideas; the courage to venture into the unknown, searching for new ways to develop products that have never existed before. We have this courage. By pooling and utilizing our competencies across all sectors, you benefit from our cumulative knowledge in metering of fluids whether it is in water treatment, cooling or hygienic processing applications.

Brkert offers a remarkable range of servo-assisted and direct acting solenoid valves. Read more about them in this brochure.

Brkert offers unlimited modularity for process control with angle-seat, globe and diaphragm valves in the widest range of configurations.

Here you can find our product range of pneumatic valves, valve units and automation systems as well as information on our control cabinet building.

Here you can find our sensors, transmitters and controllers for measuring and controlling flow, temperature, pressure, level, pH/ORP and conductivity.

CLOSENESS
There are things we simply take for granted. Only when they are gone, do we realize how important these things really were. This applies in particular to closeness. Without closeness, it is very difficult to build relationships and a good understanding of one another. As an established medium-sized company, we know that. And that is why we are always there for you. Working with you, we develop the best possible solutions for your projects. Our global presence in 35 locations enables us to press ahead with sensor innovations for our customers around the world.
The brochure contains an overview of Brkert miniature valves and micro pumps, which allow for precise and safe handling of small volumes of liquids. This brochure provides technical background information as well as a detailed product overview for the mass flow controller and meter product range. This brochure presents our solenoid control valves including their respective features, functions and typical applications.

Brkert | Sensors, Transmitters and Controllers

How to use this Brochure

Providing Process Vision


For more than 20 years we have been providing our customers with sensors, transmitters and controllers where fit-for-purpose is optimized. At the same time our sensor range has become a key ingredient of our offer to complete the control loop and take care of your process headaches. From the outset our clients, large and small, have appreciated the practical orientation, man-machine interface and architecture of the sensor range characterized by extremely simple installation, commissioning, calibration and teach functionality. Standardized layout, electrical interfaces, process connections. and, above all, intuitive menus, make the whole range simple to work with. Designed to Fit Our Clients Applications Perfectly When we define quality as fit-for-purpose, Brkert sensors prove their exceptional quality in all relevant applications. Wherever you need to display process values, perform control functions, monitor alarms to control flow rates, monitor leaks or control pH values Brkert sensors make the difference. Some industries constantly demand higher communication technology with fieldbus interfaces and multi-channel designs. Some examples are FDT/DTM and wireless while others exhibit an increasing demand for simple monitoring with switching output. We take care of both and, at the same time, we combine our sensor knowledge into innovative systems. New Beautiful Design ELEMENT is a complete system approach that allows you to solve process problems. It encompasses the total loop: valves, sensors and controllers in one beautifully simple architecture which can be relied on to monitor and control inert fluids, steam, corrosive solvents, chemicals or abrasive fluids in a wide variety of application environments. Combining the chemical characteristics of engineered polymers with the beauty and endurance of stainless steel, ELEMENTs platform is rugged and clean. There is no paint, no pockets, no pneumatic lines. Brkerts ongoing development to combine control and communications technology with process control hardware is unparalleled. ELEMENT surpasses industry standards in flexibility, simplicity and intuitive thinking. Each device is a joy to commission, calibrate and use.

How to use this Brochure


Each measured process variable has information to help you choose the correct equipment for your purpose. In this brochure you will find technical principles, range overviews, features and selection help. Datasheets for each type are always available online at www.burkert.com.

Flow

Principles

Level

Range pH/ORP

Conductivity

Features

Pressure Selection Help

Temperature

Individual datasheets

Brkert | Sensors, Transmitters and Controllers

Overview Sensor Solutions

A Complete World of Sensor Solutions


Flow, Batch and Ratio Level pH/ORP Conductivity Pressure Temperature Transmitters and Controllers

Paddle wheel

Ultrasonic

Glass electrode

Conductive

Switch

PT100 sensor

Single channel universal controller

Oval gear

Radar

Enamel electrode

Inductive

Transmitter/display

PT100 Switch

Positioners and process controllers

Dual channel analysis controller Magmeter

Guided microwave

Transmitter

Transmitter

Multi channel water chemistry controller

Ultrasonic

Tuning fork Multi channel universal controller

Differential pressure

Float switch

pH Controller

Analysis transmitter

Page 10

Page 48

Page 58

Page 68

Page 82

Page 88

Page 92

10

Brkert | Sensors, Transmitters and Controllers

Flow, Batch and Ratio

11

Accurate and Reliable Flow, Batch and Ratio


Flow monitoring and control is the foundation for the Brkert sensor range. In our factories we manufacture sensors (with raw signal output) and transmitters (with 4-20mA output) for a wide variety of customers around the world. Liquid flow measurement is made by a wide range of principles which are explained in more detail on the next few pages but are composed of paddle wheel, magmeter, oval gear, ultrasonic and differental pressure. Each type of sensor fits inside an architecture arranged around common interfaces and communication structures. They are characterized by similar menus, displays, totalizers, teach-in and volumetric calibration functions. Standard industry voltages, certifications, norms, and factory calibration certificates are always available. Materials such as PEEK, ceramics, and PVDF are used to ensure long life and chemical compatibility. Flow expertise combined with our valve history is a perfect match for simple and accurate batch control and fast acting ratio control. The interface with our valves is designed to be as simple as possible and complete PID flow loops can be made with just two components. We Make Ideas Flow.

12

Brkert | Sensors, Transmitters and Controllers

Flow, Batch and Ratio

13

Measuring Principles
Paddle wheel sensors may be differentiated by the material used for the paddle wheel (plastic or stainless steel) or on the basis of signal detection/evaluation (coil sensor, HT coil sensor, Hall sensor or optical sensor). This results in 4 different paddle wheel versions whose principles are described here. Plastic paddle wheel (PVDF or PP) with inductive detection and pulse output A PVDF or PP paddle wheel with four molded permanent magnets in the arms rotates on a precision, wear resistant ceramic spindle and two ceramic bearings. A Hall sensor detects the magnetic field of the rotating paddle wheel is placed outside of the fluid area. Two output signals are generated per revolution and the frequency changes proportionally with the speed of rotation of the paddle wheel. An integrated electronics board converts this signal to a square-wave frequency signal. Two output signals are generated per revolution and the frequency changes proportionally with the speed of rotation of the paddle wheel. An integrated electronics board converts this signal to a square-wave frequency signal. Plastic paddle wheel (PVDF or PP) with inductive detection and sinusoidal output A PVDF or PP paddle wheel with four molded permanent magnets in the arms rotates on a precision, wear resistant ceramic spindle and two ceramic bearings. A coil with a ferrite core, detecting the magnetic field of the rotating paddle wheel, is placed outside of the fluid area. The frequency and voltage change in proportion to the rotational speed of the paddle wheel and two positive signals are generated per revolution. The rotation of the paddle wheel generates a sinusoidal voltage signal in the coil proportional to the flow rate. This sensor is two-wire and requires no additional auxiliary energy supply. A connected, batteryoperated display unit allows operation independent of mains voltage. Plastic paddle wheel (PVDF) with optical detection and pulse output The paddle wheel is made of PVDF material and the spindle and two bearings are made of wear-resistant ceramic material (Al2O3). Two infrared transmitters (IR) and receivers are placed in the electronics housing outside of the medium area, separated by plastic which allows infrared radiation to pass through it. The rotation of the paddle wheel is detected with these IR diodes and the integrated electronics converts the reflected IR-Signal to a square wave frequency signal, proportional to the flow rate. This optical method allows the flow rate to be detected in media with ferromagnetic particles and to detect the direction of the flow. Stainless steel paddle wheel with inductive detection and pulse output This paddle wheel consists of stainless steel with very low ferromagnetic characteristic. The spindle is made of a high tech ceramic or stainless steel and the bearing is made of PEEK or ceramic. Inside the top-mounted electronics is a HT coil with permanents magnets and electronics which converts the coil signal into a square wave frequency signal proportional to the flow rate. The frequency changes in proportion to the speed of rotation of the paddle wheel. Two positive output signals are generated per revolution. This method is particularly used for media with temperatures up to 160C (320F). Ferromagnetic particles and contaminants in the fluid do not restrict the range of application.

Hall sensor

Coil

Optical

HT coil

S
S N S N

Magnetic field

Magnetic field

Output signal Output in V


Rotation

Output signal Output in V Frequency in Hz


Rotation

N N

S N S
S N

S
S N S N

Frequency in Hz

N S

Output signal Output in V


Rotation

Output signal Output in V Frequency in Hz


Rotation

Frequency in Hz

14

Brkert | Sensors, Transmitters and Controllers

Global Expertise

15

Plastic paddle with magnetic detection and switch output A permanent magnet is integrated into a paddle. The paddle is able to turn on a stainless steel spindle in the flow crosssection and is in vertical position if there is no flow. A reed contact is positioned above the paddle outside the medium area in the electronics housing. If a specific flow velocity is exceeded, the paddle is deflected in flow direction and switches the reed contact. The switching point can be set for increasing and decreasing flow velocities by means of an adjusting screw. The devices are available in the following versions: Normally open (NO). The flow closes the contact. Normally closed (NC). The flow opens the contact.

Volumetric flow measuring: oval gear with inductive detection and pulse output Two toothed oval rotors, mounted perpendicular to the flow direction in a special housing, are forced to rotate by a flowing fluid. Each rotor transmits fluid from inlet to outlet and forms a closed compartment when its major axis is aligned with the main flow direction. The volume passed per revolution of each rotor is four times the volume between the rotor and the oval housing when the rotor is confining liquid. Two small permanent magnets positioned in one of the oval gears are used to detect the rotary movement. A Hall sensor which detects the magnetic field of the oval gear and generates two square-wave output signals is placed outside of the medium area in an electronics housing. The number of pulses is directly proportional to the number of chamber volumes pumped and therefore making this method particularly suitable for flow measurement of viscous media even at high pressure.

Magnetic field Reed contact

Hall sensor

Permanent magnet
N S

Output signal Output in V


Magnetic field
Rotation

Frequency in Hz

16

Brkert | Sensors, Transmitters and Controllers

Flow, Batch and Ratio

17

Measuring Principles Non Moving Parts


Magnetic inductive flow meters Magnetic inductive flow meters, also known as magmeters, obtain the flow velocity by measuring the changes of induced voltage of the conductive fluid passing across a controlled magnetic field. Magmeters may be designed as full bore magmeters or insertion magmeters. Insertion magmeter An Insertion finger sensor element is mounted on one wall side and is in contact with the fluid. An electric coil which is placed near the top of the finger generates a constant alternating magnetic field B in the flow path. According to Faradays law of electromagnetic induction, a conductive fluid passing across the magnetic field induces a current flow between the 2 electrodes which can be measured as a voltage. The 2 electrodes are placed at the tip of the flow finger. The higher the flow speed v, the higher the created voltage. Integrated electronics convert the voltage signal into a standard signal (e. g. 4 - 20 mA or pulse). For the full bore magmeter, the induced voltage is detected The design of the Insertion magmeter is very compact and can also be easily installed into existing pipe systems. Insertion magmeters are suitable for flow measurement of virtually all conductive fluid media even with a high level of contamination. Only non-conductive fluids <20 s, coating type liquids or highly abrasive fluids restrict application options. Due to the fact that only one point of the pipes cross section is used to measure the fluid velocity, the accuracy is slightly less then that of a full bore magmeter. by electrodes, which are arranged directly opposite of each other measuring the induced voltage of the entire pipe cross section. The advantage is that the entire flow profile can be detected. This results in very precise measurement of the medium velocity. Only non-conductive fluids <5 s, fluids causing coatings or highly abrasive fluids restrict application options.
Receiver/ Transmitter 1 Receiver/ Transmitter 2 Upstream pressure p1 Downstream pressure p2

Ultrasonic flow meter A pair of transducers each working as a receiver or transmitter, are placed in the wall pipe with a specific distance (L). Both transducers send out an acoustic wave signal at the same time to the downstream and the upstream receiver. Full bore magmeter Two electrical coils are placed around the pipe of the flow to be measured and sets up a pair of electrodes across the pipe wall. The two coils generates a constant and homogeneous alternating magnetic field in the flow cross section. According to Faradays law of electromagnetic induction, a conductive fluid passing across the magnetic field induces a current flow between the 2 electrodes which can be measured as a voltage. The higher the flow speed v, the higher the created voltage. Integrated electronics converts the voltage signal into a standard signal (e. g., 4 - 20 mA or pulse). The signals are reflected by 2 mirrors; one on the upstream side of the pipe and the other on the downstream side of the pipe. The traveling time of both signals is measured by an integrated electronic board. The time for acoustic waves to travel from the upstream transducer 1 to the downstream transducer 2 is shorter than the time it requires for the same waves to travel from the downstream to the upstream. The difference in traveling time is directly proportional to the flow speed (V). The larger the difference, the higher the flow velocity. With this measuring principle it is possible to measure all kinds of water based fluids with a turn down ratio of up to 1:250. Conductive as well as non conductive fluids can be measured without any problems and having no moving parts means the maintenance costs are negligible.

Differential pressure flow meter Differential pressure flow meters employ the Bernoulli equation that describes the relationship between pressure and flow velocity. A flat orifice plate with an opening is inserted into the pipe and placed perpendicular to the flow stream. As the fluid passes through the orifice plate, the restricted cross section area causes an increase in velocity and decrease in pressure. The pressure difference before and after the orifice plate is used to calculate the flow velocity. The larger the pressure difference, the higher the flow velocity. The turn down ratio between smallest and highest measurable flow is about 10:1. Conductive as well as non conductive fluids can be measured without any problems. Having no moving parts, the maintenance costs are negligible. The measurable liquids can vary between clean, dirty and viscous fluids. Depending on the orifice plate size, it may be necessary to filter the fluid.

Ui

Induced voltage Induction coil

V
V

t1 t2 L

Electrodes e e B Magnetic field

Orifice plate

Fluid velocity

e
t1 t t2

18

Brkert | Sensors, Transmitters and Controllers

Flow, Batch and Ratio

19

Flow Range Paddle Wheel Sensors

Reed contact

Output 4 - 20 mA
4 ... 20

Frequency

Relay

Transistor (NPN, PNP)

Namur

Remote transmitter

Valve mount 8025 T


4 ... 20

8693 8032 Display


2x
4 ... 20

8611
4x
4 ... 20

Wall mount

Rail mount 8025


4 ... 20

Panel mount

2x

Compact transmitter
8032
4 ... 20

8036
4 ... 20

8039

8026
4 ... 20

2x 2x

2x

Sensor
8010 8030 HT 8030 SE 30 Ex 8011 8012 8031

8020

4 ... 20

Fitting

S010

S030HT

S030

S039

S020

switch

flow meter magnetic hall effect and coil Inline fittings

flow meter optical Insertion fittings

20

Brkert | Sensors, Transmitters and Controllers

Flow, Batch and Ratio

21

Flow Features Paddle Wheel


Please see datasheets for further information. Sensors which provide perfect performance for clean, neutral or aggressive liquids in moderate pressures and temperatures

Sensor type Sensor principle Flow rate range [l/min] Flow rate range [GPM] Temperature/pressure range

8010 Reed contact 4 - 1000 1 - 265 see P/T chart pages 46/47 DN15 - DN50 ( - 2" NPT) PVDF Ceramic/Ceramic FKM, EPDM PVC, PP, PVDF, Br, SS No fibres No ferromagnetic parts. < 1% contaminants <300 No affect S010 N/A

8011 Hall 0.5 - 1000 .13 - 265 see P/T chart pages 46/47 DN6 - DN50 (6 mm - 2" NPT) PVDF Ceramic/Ceramic FKM, EPDM PVC, PP, PVDF, Br, SS No fibres No ferromagnetic parts. < 1% contaminants <300 No affect S012 1:33

8012 Hall or optical 0.5 - 1000 .13 - 265 see P/T chart pages 46/47 DN6 - DN50 (6 mm - 2" NPT) PVDF Ceramic/Ceramic FKM, EPDM PVC, PP, PVDF, Br, SS No fibres < 1% contaminants

SE30EX Hall 0.5 - 1000 .13 - 265 see P/T chart pages 46/47 DN6 - DN50 (6 mm - 2" NPT) PVDF Ceramic/Ceramic FKM PVC, PP, PVDF, Br, SS No fibres No ferromagnetic parts. < 1% contaminants <300 No affect S030 1:33

8030 HT HT-coil 0.85 - 1000 .22 - 265 see P/T chart pages 46/47 DN6 - DN50 (6 mm - 2" NPT) SS Ceramic/Ceramic or Steel/PEEK FKM, EPDM SS No fibres < 1% contaminants <300 No affect S030 HT 1:20

8030 Hall 0.5 - 1000 .13 - 265 see P/T chart pages 46/47 DN6 - DN50 (6 mm - 2" NPT) PVDF Ceramic/Ceramic FKM, EPDM PVC, PP, PVDF, Br, SS No fibres No ferromagnetic parts. < 1% contaminants <300 No affect S030 1:33

8032 Hall 0.5 - 1000 .13 - 265 see P/T chart pages 46/47 DN6 - DN50 (6 mm - 2" NPT) PVDF Ceramic/Ceramic FKM, EPDM PVC, PP, PVDF, Br, SS No fibres No ferromagnetic parts. < 1% contaminants <300 No affect S030 1:33

8035B/8036 Hall 0.5 - 1000 .13 - 265 see P/T chart pages 46/47 DN6 - DN50 (6 mm - 2" NPT) PVDF Ceramic/Ceramic FKM, EPDM PVC, PP, PVDF, Br, SS No fibres No ferromagnetic parts. < 1% contaminants <300 No affect S030 1:33

8039 Optical 0.5 - 1000 .13 - 265 see P/T chart pages 46/47 DN6 - DN50 (6 mm - 2" NPT) PVDF Ceramic/Ceramic FKM, EPDM SS, Br No fibres < 1% contaminants <300 No affect S039 1:33

8020 Hall 0.5 - 75000 .13 - 19,813 see P/T chart pages 46/47 DN15 - DN400 (" - 2") PVDF Ceramic/Ceramic or Steel/PEEK FKM, EPDM PVC, PP, PVDF, Br, SS No fibres No ferromagnetic parts. < 1% contaminants <300 No affect S020 1:33

8025B/8036 Hall 0.5 - 75000 .13 - 19,813 see P/T chart pages 46/47 DN15 - DN400 (" - 2") PVDF Ceramic/Ceramic FKM, EPDM PVC, PP, PVDF, Br, SS No fibres No ferromagnetic parts. < 1% contaminants <300 No affect S020 1:33

8031 Hall 0.16 - 4 .04 - 1 6bar (87psi) at 20 C (68F) Max 80 C (176F) G & NPT 1/8" G " POM/ECTFE Corepoint/ Sapir/Rubin FKM, EPDM, FFKM POM, ECTFE No fibres No ferromagnetic parts. < 1% contaminants <5 No affect integrated 1:12

Nominal diameter Wetted parts Paddle wheel Axis/bearing Seal Body

Fluid properties

Viscosity [cSt] Conductivity [S/m] Fitting type Turndown Electrical characteristics Basic function

<300 No affect S012 1:33

Switch

Sensor

Sensor, Transmitter, Switch 4-20 mA, Pulse, Transistor No Compact

Sensor

Sensor

Sensor

Sensor, Transmitter, Switch 4-20 mA, Pulse, Transistor Yes Compact, Wall

Sensor, Transmitter, Switch, Batch, Totalizer 4-20 mA, Pulse, Transistor, Relay Yes, removable Compact, Wall

Sensor, Switch

Sensor

Sensor, Transmitter, Switch, Batch, Totalizer 4-20 mA, Pulse, Transistor, Relay Yes, removable Compact, Wall, Panel

Sensor

Output Display Specifics

Reed contact NO/NC No Compact

Pulse No Compact

Namur No Compact

Pulse No Compact

Pulse No Compact

Pulse, Replace Yes Compact

Pulse No Compact

Pulse No Compact

22

Brkert | Sensors, Transmitters and Controllers

Flow, Batch and Ratio

23

Flow Range Oval Gear Sensors


4 - 20 mA
4 ... 20

Frequency

Relay Switch

Transistor

Namur

Remote transmitter

Valve mount 8025 T


4 ... 20

8611 8032 Display


2x
4 ... 20

Wall mount

4x

Rail mount 8025 Panel mount


4 ... 20

2x

Compact transmitter
SE30 Ex 8070 8072
4 ... 20

8076
4 ... 20

2x 2x

Ext. SP

Sensor
8071

Fitting
S070

Inline Fittings

24

Brkert | Sensors, Transmitters and Controllers

Flow, Batch and Ratio

25

Flow Features Oval Gear


Please see datasheets for further information. Sensors for clean viscous fluids where low flow is required

Type 8070

Type 8071

Type 8072

Type 8075B/8076

Type SE30EX

Fluidic characteristics Sensor principle Flow rate range [l/min] Flow rate range [GPM] Temperature/pressure range Nominal diameter Wetted parts Rotor Axis/bearing Seal Body Fluid properties Viscosity [cSt] Conductivity [S/m] Fitting type Turndown Electrical characteristics Basic function Output Display Sensor Pulse No Sensor Pulse No Transmitter, Switch Pulse, 4 - 20 mA, Switch Yes Transmitter, Switch, Batch Pulse, Relay, 4 - 20 mA, Switch Yes Sensor Namur NPN / PNP No Hall 2 - 1200 0.50 - 320 55bar (800psi) at 120 C (248F) (depending on orifice) DN15 - DN100 (NPT " - 4" ) Hall 0.008 - 8.33 .002 - 2.2 55bar (800psi) at 120 C (248F) G & NPT G " and 1/8" Hall 2 - 1200 0.50 - 320 55bar (800psi) at 120 C (248F) (depending on orifice) DN15 - DN100 (NPT " - 4" ) Hall 2 - 1200 0.50 - 320 55bar (800psi) at 120 C (248F) (depending on orifice) DN15 - DN100 (NPT " - 4" ) Hall 2 - 1200 0.50 - 320 55bar (800psi) at 120 C (248F) DN15 - DN100 (NPT " - 4" )

PPS, Aluminium, SS SS FKM (EPDM or PTFE) AL, SS No fibres. No ferromagnetic parts. Filtered. <1 Mio No affect S070 1:25

PPS, SS Hastelloy C, SS FKM (EPDM) Aluminium, PPS, SS No fibres. No ferromagnetic parts. Filtered. <1 Mio No affect

PPS, Aluminium, SS SS FKM (EPDM or PTFE) AL, SS No fibres. No ferromagnetic parts. Filtered. <1 Mio No affect S070

PPS, Aluminium, SS SS FKM (EPDM or PTFE) AL, SS No fibres. No ferromagnetic parts. Filtered. <1 Mio No affect S070 1:25

PPS, Aluminium, SS SS FKM (EPDM or PTFE) AL, SS No fibres. No ferromagnetic parts. Filtered. <1 Mio No affect S070 1:25

1:50

1:25

26

Brkert | Sensors, Transmitters and Controllers

Flow, Batch and Ratio

27

Flow Range Magnetic, Ultrasonic and Differential Pressure


Remote transmitter
Valve mount
4 ... 20

Output 4 - 20 mA
4 ... 20

Frequency

Relay Switch

Transistor

Namur

8611 SE56
4 ... 20

Wall mount

8025 T

4x 2x
4 ... 20

8032 Display

Rail mount 8025

Panel mount

Compact transmitter
8041 8045

4 ... 20

4 ... 20

2x

Sensor

8081

8719 8709

8718 8708

4 ... 20

Out

Out

Fitting

S020

S056 S055 S051

Insertion Fittings

Full bore Fittings

28

Brkert | Sensors, Transmitters and Controllers

Flow, Batch and Ratio

29

Flow Features Non-Moving Parts


Please see datasheets for further information.

Type Sensor principle Flow rate range [l/m] Flow rate range [GPM] Temperature/pressure range

8041 Magmeter Insertion 0.3 - 75000 0.8 - 19,813 See P/T diagram pages 46/47

8045 Magmeter Insertion 0.3 - 75000 0.8 - 19,813 See P/T diagram pages 46/47

8051 Magmeter Full bore 0.02 - 208 .005 - 55 -20 150 C (-4 to 302F) at16 bar (232psi) (depending on lining) 3 - 20 (" - 1" NPT)

8055 Magmeter Full bore 0.02 - 4666 .005 - 1,233 -20 150 C (-4 to 302F) at16 bar (232psi) (depending on lining) 25 - 100 (1 - 4") (up to 400 on request)

8056 Magmeter Full bore 0-02 - 4666 .005 - 1,233 -20 150 C (-4 to 302F) at16 bar (232psi) 3 - 100 (" - 4")

8081 Ultrasonic 0.06 - 200 .016 - 53 16 bar (232psi) at 5 - 90 C (41 to 194F) 15 - 25 (" - 1 " NPT on request) PES (measuring tube) SS (tilting mirror)

8718/8719 Differential Pressure 0.01 - 0.6 .003 - .016 10 bar (145psi) at 10 - 40 C (50 to 104F) G , NPT , flange

Nominal diameter Wetted parts Sensorfinger Electrodes [Holder] Lining Seal Body

6 - 400 (6mm - 8")

6 - 400 (6mm - 8")

SS, PVDF SS/Alloy (PEEK) analogue S020

SS, PVDF SS/Alloy (PEEK) analogue S020

SS (orifice plate) SS

PVC, PVDF, PP, SS Clean and contaminated media ferromagnetic parts < 1 % < 1000 > 20 S020 1:50

PVC, PVDF, PP, SS Ferromagnetic parts < 1 % < 1000 > 20 S020, Clamp 1:50

SS/PTFE SS, Hasteloy C, Titanium, Platinum EPDM, FKM SS Contaminated or sterile fluids < 1000 >5 S051 1:500

SS/PP(Ebonite)/ PTFE SS, Hasteloy C, Titanium, Platinum EPDM, FKM Carbon steel (painted) Contaminated or sterile fluids < 1000 >5 S055 1:500

SS/PTFE SS

SS (3A) Contaminated or sterile fluids < 1000 >5 S056 1:500

EPDM Brass Water-like fluids with no fibres and less than1% solids <4 No affect Integrated 1:250

FKM/EPDM/FFKM SS Water, alcohol <4 No affect Integrated 1:10

Fluid properties Viscosity [cSt] Conductivity [S/cm] Fitting type Turndown ratio Characteristics Basic function Output Display

Sensor, Transmitter Relay, Pulse, 4 - 20 mA No

Switch, Sensor, Transmitter, Totalizer Relay, Pulse, 4 - 20 mA Yes

Sensor, Transmitter, Batch Controller, Totalizer Transistor, Relay, Pulse, 4 - 20 mA Yes/no

Sensor, Transmitter, Batch Controller, Totalizer Transistor, Relay, Pulse, 4 - 20 mA Yes/no

Sensor, Transmitter, Batch Controller, Totalizer Transistor, Relay, Pulse, 4 - 20 mA Yes/no

Sensor Pulse, 4 - 20 mA No

Sensor, Transmitter 0 - 5 V, 0 -10 V, 0 - 20 mA, 4 - 20 mA LED

30

Brkert | Sensors, Transmitters and Controllers

Flow, Batch and Ratio

31

Batch/Ratio Controller Range


Ratio

Output 4 - 20 mA
4 ... 20

Frequency

Relay Switch

Transistor

Batch

Wall mount

8025 B

2x

SE56

4 ... 20

2x

4x

Panel mount

8611 Ratio

4 ... 20

8025 B

8025 B

8035 B

8075 B

2x

2x

4 ... 20

2x

8011

8012

8020

8030

8031

8041
4 ... 20

8070

8071

8081

8056, 8055, 8051

4 ... 20

4 ... 20

Paddle wheel flow meter

Magmeter

Oval gear meter

Ultrasonic meter

Magmeter

32

Brkert | Sensors, Transmitters and Controllers

Flow, Batch and Ratio

33

Batch Controller Features


Brkert batch controllers can control very precise dosing and filling operations. Two switching relay outputs serve to actuate valves for a single or double stage, precise dosing function. If required, one of the relays can be used as an alarm output in the event of an incomplete batch event. The dosing operations can be started manually or automatically. The design and materials allow use in virtually all types of fluids. It is possible to select the most appropriate measuring principle (paddle wheel, oval gear, ultrasonic, full bore magmeter or Insertion magmeter) depending on the properties of the medium. Selection tables, measuring principles and further information on selecting the appropriate sensor/fitting can be found in chapter 1: Flow measuring. Local dosing: the user enters the quantity to be metered and initiates the dosage from the keypad.  Local dosing with pre-set quantity: the user selects up to 7 pre-set volumes and initiates the dosage from the keypad.  Remote control dosing using a 7 position rotary knob (selecting a pre-set quantity) or binary data inputs. Dosing controlled by a PLC unit using 3 binary data inputs for up to 7 preselected volumes.  Automatic dosing controlled by variation of pulse duration. The quantity of the dose is directly proportional to the duration of a pulse. The following dosing and filling operations are possible with the 8025/8035 batch controllers:

7 pre-programmed remote batchselection via 3 binary inputs (Local or remote activation)

3 4 5
6
1 2

8025B/8036B The compact version, type 8025 or 8035, combines a paddle-wheel flow sensor and an electronic module with a display in an IP65/ NEMA4 enclosure.
Valve
On Off

Transistor switch output for incomplete batch alarm or batch status

Batch controller

Start/Stop (automatic or manual)

Valve
On Off

Frequency

8025B The remote version consists of an electronic module 8025 integrated in a front-over or integrated in an IP65 enclosure. The associated separate flow sensor should have a pulse output signal, like Brkert sensor Type 8020, 8030 (see interconnection chart) or another flow sensor available from the market. The output signals are provided on a terminal strip.
Slow fill valve Fast fill valve Tank (Chemicals, etc.)

Flow meter

Full bore magmeter 8051/8055/8056 The full bore magmeter, 8051/8055/8056, is available as remote or compact version in an IP67 enclosure. For highly precise and fast filling/dosing in hygienic applications, it is the batch controller of choice.
Batch

34

Brkert | Sensors, Transmitters and Controllers

Flow, Batch and Ratio

35

Ratio Controller Features


The Brkert 8611 ratio controller can very precise control the ratio between a main flow (Q1) and a secondary flow (Q2). Both are mixed together to a process flow Q3. The controller can handle 2 independent control loops. The following ratio control modes are possible: Dosing in relation to uncontrolled main flow Q1: In relation to Q1, the secondary flow Q2 can be set as ratio to Q1 (%Q1). Dosing in relation to controlled main flow Q1: In relation to the controlled Q1, the secondary flow Q2 can be set as a ratio to Q1 (%Q1). For setting the main or secondary flow, the following control methods are possible: pump with 4-20mA signal (PUMP), solenoid control valves (SCV), process valves with 8810 positioning system (PCV) or any positioner with 4-20mA control signal (4-20). For measuring the flow rate of Q1 and Q2, the following sensor types can be used: sensors with frequency signal (FREQ), sensors with 0-10V (0-10) or 4-20mA (4-20) signal. The set point and the ratio can be set external via standard signal (4-20mA or 0-10V) or directly by the keypad. With the binary input (B IN), it is possible to activate different control functions like HOLD, open or close the valve etc. With 2 binary outputs, it is possible to define alarm signals.
1

Secondary flow Q2

SETP Q1 Q2

EXT INT EXT INT ?Q1 E?Q1

FLOW FREQ 0-10 4-20

VALV PUMP 4-20* SCV PCV

PVAL*

Q1 Q2 Q1+2

4 ... 20

Main flow Q1

B IN NO HOLD CLOS OPEN HO 2 CL 2 OP 2 HO 1 CL 1 OP 1

BOUT*
2

BOUT* NO FLW2 FLW1 CTR2 CTR1

Q3

FLOW FREQ 0-10 4-20

VALV

NO 4-20* SCV PCV

* Not available in all configuration modes

36

Brkert | Sensors, Transmitters and Controllers

Flow, Batch and Ratio

37

Selection Help Flow


This table shows the measuring range of all flow meters depending on the flow technology.

DN 3 (1/16") DN 6 (1/8")
1

8051 / 8055 / 8056

DN 100 (4") DN 400 (16")

up to 400 on request

8020 / 8025B / 8026 / 8041 / 8045

75000 l/min

/8 G or NPT /8 G or NPT

8718/19

/4 G or NPT
1

8071

/4 G or NPT
8081

DN 15 (1/2")

DN 25 (1")

8031

DN 15 (1/2")

8010

DN 50 (2")

DN 6 (1/8")

8030 HT

8030

8032

8035B

8039

8036

DN 50 (2")

DN 6 (1/8")

8011/12

DN 50 (2")

DN 15 (1/2")

8070

8072

8075B

8076

DN 100 (4")

0,008

0,01

0,02

0,06

0,16

0,30

0,40

0,60

2,00

4,0

8,33

200

1000

1200

4666

[l/min]

0,002

0,003

0,005

0,016

0,042

0,079

0,106

0,159

0,528

1,057

2,200

52,83

264,17

317

1232

[gpm]

38

Brkert | Sensors, Transmitters and Controllers

Flow, Batch and Ratio

39

Selection Help Flow Velocity Considerations


Depending on the sensor type, the right flow rate has to be chosen to get the best accuracy. The higher the flow velocity, the lower the measurement error, but the higher the pressure loss. On the next page you will find the relationship between flow velocity, pressure drop and accuracy (page 40-43). The following chart will help you find the correct fitting diameter for your application depending on flow velocity and sensor technology. Pipes for fluids similar to water are generally designed for an average flow velocity of approx. 2 to 3 m/s (6-10ft/s). Flow rate
[GPM] 8000 Diagram for nominal diameter selection [l/min] 55000 [m /hr] 4000
3

Selection Help Viscosity Considerations


Viscosity describes the degree of internal friction (the interaction between the atoms or molecules). We distinguish between the term dynamic viscosity and kinematic viscosity. The interrelationship between these two is based on multiplication of the relevant substance density.

= *
The below table provides a general overview of conventional media. Viscosity has a major influence on piping design and installation procedures. At a given flow velocity with an increase in fluid friction
DN 400 DN 350 DN 300 DN 250 DN 200 DN 150 DN 125 DN 100 DN 80 DN 65 DN 50 (DN 65)* DN 40 (DN 50)* DN 32 (DN 40)* DN 25 (DN 32)* DN 20 (DN 25)* DN 15 (DN 15 or DN 20)* DN 10 DN 8 DN 6 *for following fittings: with external threads acc. to SMS 1145 with weld-ends acc. to SMS 3008, BS 4825|ASME BPE or DIN 11850 Series 2 clamp acc. to SMS 3017/ISO 2852, BS 4825/ASME BPE or DIN 32676

due to media becoming more viscous, pressure drop in a pipe will rise. Under this condition either the flow velocity will drop or the upstream pressure must be increased to overcome the increased fluid friction. Medium temperature also influences fluid viscosity. With water, the change in viscosity can usually be ignored, but for other media such as oil, pressure loses due to increased viscosity must always be taken into account.

2000 1000 10000

1,600 800

500 5000 200 100 1000

Units, dynamic viscosity: [] = 1 N/m2 s = 1 Pa s = 103 mPa s = 10 Poise = 103 cP (centipose) 1 mPa s = 1 cP Units, kinematic viscosity: [] = 1 m2/s = 106 mm2/s = 106 cST (centistroke) 1 mm2/s = 1 cSt

160 80

50 500 20 10 100

16 8

5 50 20 10 2 1

Medium/Temp. [C] Water 20C Ethanol/20C Turpentine/20C Juice Milk Glycol/20C Cream (body lotion) Olive oil/20C Detergent 20C
Flow velocity

Dyn. viscos. [cP] 1.01 1.19 1.46 2-5 5-10 19.90 70-150 107.50 360.00 986.00 1000 -2000 5000

Density [kg/m3] 1000 1580 860 1040 1030 1110 1050 919 1028 860 1400 1430

Kinem. viscosity [cST] 1.01 0.75 1.70 1.93 - 4.8 4.85 - 9.7 17.9 66 - 142 117.00 350.00 1146.50 714 - 1428 3496

1.6 0.8

5 3 2 1

0.5 0.2 0.1 0.05 0.02 0.01 0.1 0.33

0.16 0.08

0.5 0.3 0.2

0.2 0.3 0.65 1

0.5 1.6

1 3.3

2 6.6

3 10

5 16.4 8030 HT

10 [m/s] 33 [ft/s]

Transformer oil/20C Thin honey Ketchup

8011 / 12 / 20 / 25 / 26 /30 / 32 / 35 / 36 /39 8041 / 8045 8051 / 55 / 56

Viscosity value of conventional media

40

Brkert | Sensors, Transmitters and Controllers

Flow, Batch and Ratio

41

Selection Help Flow Meter Accuracy


Consideration of Measurement Error A decision to opt for a specific measuring method usually depends on the required accuracy. Basically, percentages refer either to the measured value or to the full scale value. The maximum measurement error refers to the full scale value and describes the sum of all possibly occurring individual deviations and is frequently shown graphically as a bell-shaped curve. This includes: Linearity over the entire measuring range Repeat accuracy (referred to the measured value) Production-related tolerances Installation tolerances as the result of installation in the pipe system. The production-related tolerances and installation tolerances can be eliminated by field calibration (teach-in), greatly reducing measurement error.

Selection Help Flow Meter Accuracy with Teach In


Teach-in calibration Many Brkert flow devices can be calibrated in line for the precise determination of the K-factor (proportionality factor between pulse frequency and flow rate). Volume teach-in calibration involves filling a tank with a defined fluid volume. During this filling operation, the pulses generated by the flow sensor are counted by the electronics. After completion of the filling operation, the value of the filled volume is determined (e. g., with a balance or graduated container) and is entered on the keypad of the transmitter. The device calculates the determined K-factor after the entry has been confirmed. Flow rate teach-in calibration involves entering the flow rate of a reference device in the same pipe on the keypad during the operation. The K-factor is calculated after this entry is confirmed.

Flow meter accuracies with standard K-factor calibration


o.F.S. = Full scale (10m/s) o.R. = of Reading 8,0 Paddle wheel 8030 HT, 8032, 8039 1% o.F.S. + 3% o.R.

Flow meter accuracies with teach-in calibration for paddle wheel and finger magmeter
8,0

o.F.S. = Full scale (10m/s) o.R. = of Reading

6,0 Finger magmeter 4% o.R. Ultrasonic 0.01% o.F.S + 2% o.R. 2,0 Max. Error [%] Oval gear 0.5% o.R. Full bore magmeter 0.2% o.R. > 1 m/s)

6,0 Paddle wheel 8011, 8012, 8025, 8026, 8030, 8035, 8036 0.5% o.F.S. + 2.5% o.R. Paddle wheel 8030 HT, 8032, 8039 1% o.F.S

4,0

4,0 Paddle wheel 8011, 8012, 8025, 8026, 8030, 8035, 8036 0.5% o.F.S. + 2.5% o.R.

Max. Error [% of reading]

2,0

Finger magmeter 2% o.R

0,0

0,0

-2,0

-2,0

-4,0

-4,0

Flow velocity

-6,0

-6,0

-8,0 0 0 1 3.3 2 6.5 3 9.8 4 13 5 16.4 6 19.7 7 23 8 26.2 9 29.5 10 33

-8,0 0 0 1 3.3 2 6.5 3 9.8 4 13 5 16.4 6 19.7 7 23 8 26.2 9 29.5 33

[m/s] [ft/s]

10 [m/s] [ft/s]

Flow velocity

42

Brkert | Sensors, Transmitters and Controllers

Pressure drop [psi] [mbar] 14.50 1000 13.05 900 800 700 600 500 400 300 200 100 0 0 0

Pressure drop for Inline Paddle wheel Types 8011, 8012, 8030, 8032, 8035, 8036, SE30EX
DN 6 (Pipe 10x1) DN 8 (Pipe 10x1) DN 15 (Pipe 20x2.3) DN 20 (Pipe 25x2.8) DN 25 (Pipe 32x2.4) DN 32 (Pipe 40x3) DN 40 (Pipe 50x3.7) DN 50 (Pipe 63x4.7) 1 3.3 2 6.5 3 9.8 4 13 5 16.4 6 19.7 7 23 8 26.2 9 29.5 10 [m/s] 33 [ft/s] Flow velocity

43

Selection Help Pressure Drop


Pressure loss tables A pressure loss occurs, dependent on average flow velocity, in the case of fittings and pipes. To estimate the total pressure loss in a piping system it is necessary to be aware of the individual pressure losses. Here the first three diagrams show the pressure loss of the paddle wheel types and Insertion MID types for water/ 20 C as a function of the nominal diameter and pipe connection.

11.60 10.15 8.70 7.25 5.80 4.35 2.90 1.45 0

Pressure drop [psi] [mbar] 5.08 350 4.35 300 3.63 250 2.90 200 2.18 150 1.45 100 0.73 0 50 0

Pressure drop for Insertion paddle wheel Types 8020, 8025, 8026
DN 15 (Pipe 20x2.3) DN 20 (Pipe 25x2.8) DN 25 (Pipe 32x2.4) DN 32 (Pipe 40x3) DN 40 (Pipe 50x3.7) DN 50 (Pipe 63x4.7) 2.90 200 Pressure drop [psi] [mbar] 3.63 250

Pressure drop for Insertion magmeter finger Types 8041, 8045


DN 6 (Pipe 10x1) DN 8 (Pipe 10x1) DN 15 (Pipe 20x2.3)

2.18

150

DN 20 (Pipe 25x2.8) DN 25 (Pipe 32x2.4) DN 32 (Pipe 40x3)

1.45

100

0.73

50

DN 40 (Pipe 50x3.7) DN 50 (Pipe 63x4.7) 0 0 1 3.3 2 6.5 3 9.8 4 13 5 16.4 6 19.7 7 23 8 26.2 9 29.5 10 [m/s] 33 [ft/s] Flow velocity

0 0

1 3.3

2 6.5

3 9.8

4 13

5 16.4

6 19.7

7 23

8 26.2

9 29.5

10 [m/s] 33 [ft/s] Flow velocity 0 0

The pressure loss of the oval gear sensors depends very greatly on the viscosity of the medium while the pressure loss of fluids similar to water is virtually independent of the flow rate with this measuring principle. In more viscous media, the pressure loss increases with increasing viscosity. Likewise, it increases with rising flow velocity. The Pressure loss, oval gear diagram shows the pressure loss of an oval gear flow meter 8072 with different media as a function of the flow velocity.

Pressure drop [psi] [mbar] 1.20 1200

Pressure drop for oval gear meter Types 8070, 8071, 8072, 8075

Transformer oil 1.00 1000 Washing-up cream 0.80 800 Olive oil 0.60 600 0.40 400 0.20 200 0 0 Glycol Water

0.5 1.64

1 3.3

1.5 4.9

2 6.5

2.5 8.2

3 9.8

3.5 [m/s] 11.5 [ft/s] Flow velocity

44

Brkert | Sensors, Transmitters and Controllers

Flow, Batch and Ratio

45

Modular Process Connections for Flow


Process connections for flow measuring instruments Brkert distinguishes between two fitting variants in relation to the installation of flow sensors in the process: Series S020 for Insertion sensors Series S030 for Inline sensors Both fitting series feature a standard interface to the sensor modules, thus enabling very easy installation and fastening in the system. The special feature of Inline sensors S030 in comparison with Insertion sensors S020 lies in the fact that the electronic modules of the Inline system can be exchanged with no leakage during operation of the process. The measuring sensor is located in the fitting and the measurement signal is transmitted without physical contact (magnetically or optically) to the electronic module. This means that the measuring sensor does not need to be directly connected to the electronics. On the Insertion sensor, the measuring sensor is located in a finger which is immersed into the process. The sensor can be exchanged only after depressurizing the entire system in order to avoid leakage. DN 6 - DN 50 ("-2") T-fitting with divers pipe connections made of stainless steel or plastic DN 50 - DN 350 (2"-14") Fusion spigot with or without radius made of stainless steel Insertion fitting system S020 When using Brkert finger sensors, it is necessary to use type S020 installation fittings of the correct nominal diameter. It is important to ensure that the correct finger length, dependent on nominal fitting diameter, is selected. We distinguish between a short sensor finger and a long sensor finger. Insertion series S020 fittings are available in plastic, brass or stainless steel. They consist of a connector with indentation, a plastic seal and a union nut for fixing the sensor in position. The connector is already permanently connected to a pipe fitting up to DN 50 (2"). A wide range of connection options for installation in a pipe are available (spigot, external thread, weld end, hygienic clamp or flange, etc.). In the case of nominal diameters from 65 to approx. 400 mm, it is advisable to use fusion spigots made of plastic, stainless steel, or a connection saddle made of plastic. Individual connectors which can be welded in (stainless steel) or screwed in (plastic) are recommended for installation in tanks. They consist of a pipe fitting with integrated measuring sensor (paddle wheel or magnetic paddle) and a screwed-on bayonet catch. The corresponding electronic module is inserted in this catch, rotated through 90 and locked with a screw. Series S030 fittings are available in the nominal diameter range from 6 to 50 mm with a variety of connection options for installation in a pipe (threaded port, external thread, weld end, clamp or flange, etc.) as are those in series S020. The type S010 fitting is a special case since it features an integrated paddle in place of the paddle wheel on the S030. A molded magnet in the paddle triggers a reed contact in the electronic module after being appropriately deflected by the flows dynamic force. The overall dimensions of the S010 are the same as those of the S030. Version S010 was developed for flow switch type 8010. Inline series S030 or S010 fittings are available in plastic, brass or stainless steel. Stainless steel housing with clamp connection Stainless steel housing with internal thread Stainless steel housing with internal thread Stainless steel housing with flangs Inline fitting system S030 and S010 When using Brkert Inline sensors, it is necessary to use type S030 installation fittings made of plastic, brass or stainless steel. In this series, the measuring sensor (a paddle wheel) is integrated in the fitting and is closed to the outside so that the system is not opened even if the electronic module is detached (no leakage). Signals are transmitted from the paddle wheel to the electronic module magnetically via an induction coil, Hall element or optically by means of infrared. Brass housing with internal thread (threaded port) Stainless steel housing with weld end DN 6 - DN 50 ("-2") Plastic housing with true union connection with solvent or fusion spigot Plastic housing with solvent joint or weld-end connection

DN 65 - DN 400 (2.5"-16") Threaded connectors and fusion spigots made of plastic (weld-o-let)

DN 80 - DN 400 (3"-16") Connection saddle made of plastic


Examples of S030 Inline fittings

Installation of an Insertion Flow sensor using type 8025 as an example

Installation of an Inline Flow sensor using type 8032 as an example

46

Brkert | Sensors, Transmitters and Controllers

Flow, Batch and Ratio

47

Pressure & Temperature Rating for Installed Inline and Insertion Flowmeters

Insertion magmeter with PVDF finger


Pressure [psi] [bar] 145 10 130.5 116 9 8 7 6 5 PVC fitting Media Temperature +110 +230 +130 +266 +150 [C] +302 [F] Metal fitting PVDF fitting +110 +230 +130 +266 +150 [C] +302 [F] Media Temperature 4 3 2 1 0 -10 +14 +10 +50 +30 +86 +50 +122 +70 +158 PP fitting Metal fitting PVDF fitting 8041, 8045 PVDF sensor

Pressure/temperature diagram for plastics The pressure resistance of plastics drops with increasing medium temperature. This dependence is shown for pressure stages PN10 and PN16 in the following diagrams..

101.5 87 72.5 58 43.5 29 14.5 0

+90 +194

Paddle wheel flow sensors

8030HT (with ceramic bearing) 8030HT (with PEEK bearing) Pressure [psi] [bar] 232 16 217.5 15 203 14 188.5 13 174 12 159.5 11 145 10 130.5 116 101.5 87 72.5 58 43.5 29 14.5 0 9 8 7 6 5 4 3 2 1 0 -20 -4 0 +32 +20 +60 +40 +104 +60 +140 +80 +176 PP fitting Media Temperature PVC fitting PVDF fitting Metal fitting (Type 8011 / 8012) Metal fitting (Type 8020 / 8025) Metal fitting (Type S030) 8011 / 8012 / 8030 / 8032 / 8035 / 8036 /8039 8020 / 8025 / 8026 /SE30 Ex

Insertion magmeter with stainless steel finger

Pressure [psi] [bar] 232 16 217.5 15 203 14 188.5 13 174 12 159.5 11 145 10 130.5 116 101.5 87 72.5 58 43.5 29 14.5 0 9 8 7 6 5 4 3 2 1 0 -10 +14 +10 +50 +30 +86

8041 Stainless steel sensor 8045 Stainless steel sensor

PVC fitting

PP fitting

+100 +212

+120 +248

+140 +284

+160 [C] +320 [F]

+50 +122

+70 +158

+90 +194

48

Brkert | Sensors, Transmitters and Controllers

Global Expertise

49

Our Level Best


Level measurement is an integral part of process control, and may be used in a wide variety of industries with many different requirements. We can divide level measurement into point level switching/alarming and continuous level monitoring/control. Point level sensors are used to indicate the level has reached a single discrete liquid height which is a preset level. These sensors can be used to automate an on-off valve to fill liquid into a tank from a low to a high filling point in a tank. For point level we have supplied switches which employ these principles: Tuning fork Float The more sophisticated continuous level sensors can provide complete level monitoring of a system. A continuous level sensor, as the name implies, measures the fluid level at all points within the measurement range, rather than at a specific, single point and carries out this task with or without contacting the media. The continuous level sensor provides an analog output that directly correlates to the distance from the sensor position, the level in the tank and, with some programming, the volume. This analog signal from the sensor may be directly linked to a visual indicator or to a process control loop, forming a level management system. Discrete sensors are often used in parallel to continuous sensors for overfill or leak positions (HH, LL). Exact level control is a key application for Brkert as it involves a complete process loop and for continuous level we have supplied transmitters which employ these key principles: Ultrasonic Radar Guided microwave Hydrostatic There is a level meter for every type of liquid in any shaped tank at any temperature. Application knowledge of both the sensor principles and the control loop is therefore the key to success. On the next few pages you will find descriptions of the operating principles behind our level world. Please take full advantage of our expertise by letting us help to design the installation and control the complete loop for you.

50

Brkert | Sensors, Transmitters and Controllers

Level

51

Level Measuring Principles


Ultrasonic Radar Guided Microwave Hydrostatic Hydrostatic DP Float Tuning fork

The transducer of the ultrasonic sensor emits short ultrasonic pulses, at 70 kHz to the measured product. These pulses are reflected by the product surface and received by the transducer as echoes. The running time of the ultrasonic pulses from emission to reception is proportional to the distance and hence to the level. An integrated temperature sensor detects the temperature in the vessel and compensates the influence of temperature on the signal running time. The determined level is converted into an output signal and transmitted as an measured value. If the tank geometry is known, the volume still inside the tank can be indicated. Various disturbance echo filters even enable use in containers with built-in fixtures generating a disturbance echo.

The radar transmitter consists of an electronic housing, a process fitting element the antenna and a sensor. The antenna emits short radar pulses with a duration of approximate 1 ns to the measured product. These pulses are reflected by the product surface and received by the antenna as echoes. Radar waves travel at the speed of light. The running time of the radar pulses from emission to reception is proportional to the distance and hence to the level. The determined level is converted into an output signal and transmitted as an measured value.

High frequency microwave pulses are guided along a steel cable or a rod. When they reach the product surface, the microwave pulses are reflected and received by the processing electronics. The running time is valuated by the instrument and output as distance. Time consuming adjustment with medium is not necessary. The instruments are preset to the ordered probe length. The shortenable rod versions can be adapted individually to the exact requirements.

A fluid column generates a specific hydrostatic pressure as a function of density and filling level. A pressure sensor attached to the bottom of a tank measures this pressure with respect to a reference pressure (generally ambient pressure). Conclusions are then drawn as to the filling level with the aid of the known fluid density. Hydrostatic level measurement is suitable for virtually all types of fluids and produces very precise measured values, dependent on the accuracy of the pressure transmitter.

Restrictions apply to applications in pressurized tanks. In such cases, it is then necessary to also measure this gauge pressure. This can be done by using a second pressure sensor which detects the pressure above the filling level. A corresponding evaluation unit corrects the measured value of the first pressure sensor on the tank bottom based on this value. The higher the internal pressure of the tank, the lower the share of hydrostatic pressure in the overall pressure, and the level measurement error increases. The measuring accuracy also drops further due to the use of two pressure sensors (addition of the measurement errors).

A float floating on a fluid changes its vertical position in proportion to the level. A permanent magnet integrated in the float generates a constant magnetic field, thus causing a reed contact in this field to switch. On a float switch, a float with magnet is mechanically connected to a reed contact. This allows a switching contact to be produced for a level. A mechanical stop on the float switch prevents the float rising if the fluid level continues to rise, so that the circuit state does not change. The float moves back out of the switch position only when the fluid level drops below this stop. Restrictions apply to the use of fluids with a low density (lower than 0.7 g/cm) and coating fluids.

The tuning fork is piezoelectrically energized and vibrates at its mechanical resonance frequency of approx. 1200 Hz. When the tuning fork is submerged in the product, the frequency changes. This change is detected by the integrated oscillator and converted into a switching command. The integrated fault monitoring detects the following faults: interruption of the connection cable to the piezoelectric elements extreme material wear on the tuning fork break of the tuning fork absence of vibration

52

Brkert | Sensors, Transmitters and Controllers

Level

53

Level Range
Hart

Output 4 - 20 mA
4 ... 20

Relay

Transistor (NPN, PNP)

Namur

Remote transmitter

Valve mount 8175


4 ... 20

8693
2x
4 ... 20

8611 8611
4x
4 ... 20 4 ... 20

Wall mount

4x

Rail mount
2x

6x 4x

4 ... 20

5x 4x

Panel mount

8175
4 ... 20

8619

8620
4x

Compact transmitter
Ultrasonic 3-wire 8170 8175
2x
4 ... 20 4 ... 20 4 ... 20 4 ... 20 4 ... 20 4 ... 20 4 ... 20 4 ... 20 4 ... 20 4 ... 20

Ultrasonic 2-wire 8176 8177 8178 8136

Radar 2-wire 8137 8138

Guided Microwave 2-wire 8185 8186

Hydrostatic 3-wire 8326

Sensor

ON/OFF Switch
8110 8111 8112 8181

Tuning Fork

Floater

54

Brkert | Sensors, Transmitters and Controllers

Level

55

Level Transmitters Features

Type 8175

Type 8176

Type 8177

Type 8178

Type 8136

Type 8137

Type 8138

Type 8185

Type 8186

Type 8326

Fluidic characteristics Sensor principle Measuring range Vessel pressure Process temperature Wetted parts Seal Body Accuracy Process connection Influence coating Influence steam / condensate Avoid Electrical characteristics Basic function Wiring Output Echo filtration Display Approval Specifics Compact-, Wall- and Panel version Transmitter 3-wire 4 - 20 mA Relay Yes Yes Transmitter 2-wire 4 - 20 mA HART Yes Yes/No ATEX Compact version Transmitter 2-wire 4 - 20 mA HART Yes Yes/No ATEX Compact version Transmitter 2-wire 4 - 20 mA HART Yes Yes/No ATEX Compact version Transmitter 2-wire 4 - 20 mA HART Yes Yes/No ATEX Compact version Transmitter 2-wire 4 - 20 mA HART Yes Yes/No ATEX Compact version Transmitter 2-wire 4 - 20 mA HART Yes Yes/No ATEX Compact version Transmitter 2-wire 4 - 20 mA HART Yes Yes/No ATEX Compact version Transmitter 2-wire 4 - 20 mA HART Yes Yes/No ATEX Compact version Compact version Transmitter 2-wire 4 - 20 mA No influence Yes/No Liquids 010 m 02 bar -40 80C (176F) FKM or EPDM PVDF 3 mm G or NTP 2" High High Dust, foam, vacuum 0.25 5 m -0.2 2.0 bar -40 80C (176F) EPDM PVDF 4 mm G or NPT 1 " High High Dust, foam, vacuum Ultrasonic 0.4 8 m -0.2 2.0 bar -40 80C (176F) EPDM PVDF 4 mm G or NPT 1 " High High Dust, foam, vacuum 0.6 15 m 0 bar -40 80C (176F) EPDM SS 6 mm Mounting strap High High Dust, foam, vacuum 0.05 20 m Vacuum 3 bar -40 80C (176F) FKM PVDF 5 mm G or NPT 1 ", mounting strap High No Foam Radar 0.05 30 m Vacuum 40 bar -40 130C (266F) Klingersil, FKM SS 3 mm G or NPT 1 ", flange High No Foam 0.05 20 m Vacuum 16 bar -40 150C (302F) EPDM SS 3 mm Clamp2", varivent, flange High No Foam 0.08 32 m Vacuum 40 bar -30 150C (302F) FKM SS 3 mm G or NTP " or 1" Less No Coating Guided Microwave 0.08 4 m Vacuum 16 bar -40 150C (302F) FKM SS 3 mm Clamp2" or DIN 11851 Less No Coating Hydrostatic 0 40 bar Depending on pressure range -30 105C (221F) FKM, EPDM SS < 0.15 % of span G or NTP 1", G1" (EHEDG) Less No

56

Brkert | Sensors, Transmitters and Controllers

Level

57

Level Switches Features

Type 8110

Type 8111

Type 8112

Type 8181

Fluidic characteristics Sensor principle Vessel pressure Tuning fork -1 64 bar Tuning fork -1 64 bar Tuning fork -1 64 bar Floater 10 bar (SS), 1 bar (PP) -40 120C (248F)

Process temperature Wetted parts Seal Body Accuracy Process connection

-40 150C (302F)

-50 150C (302F)

-50 150C (302F)

Klingersil SS 2 mm G or NPT 1", Clamp2" Less No Coating

FKM SS 2 mm G or NPT 1", Clamp2" Less No Coating

FKM SS 2 mm G or NPT 1", Clamp2" Less No Coating

SS or PP

G, Rc, NPT "

Influence coating Influence steam / condensate Avoid Electrical characteristics Basic function Wiring Output

High No Dust, coating

Switch 3-wire Transistor PNP, contactless switch LED

Switch 3-wire Double-3 AmpRelay, NAMUR LED ATEX

Switch 3-wire Double-3 AmpRelay, NAMUR LED ATEX

Switch 3-wire Relay (3 Amp)

Display Approval

LED

58

Brkert | Sensors, Transmitters and Controllers

Global Expertise

59

pH and ORP Analyse Your World


Water quality is often determined by these important transmitters and in applications like boiler water conditioning, cooling towers, swimming pools or reverse osmosis it is essential. Analytical expertise combined with our valve history in engineered plastics has made perfect added functionality for simple, accurate pH control for solutions in tanks or Inline. Our production facility in Triembach, France takes pride in designing and manufacturing both pH/ ORP transmitters and fully functional pH controllers for a continually expanding global client list. Each pH sensor fits perfectly inside our analytical range and exhibits common interfaces and communication structures which are characterized by similar menus, displays, voltages, and calibration functions. Factory calibration certificates are always available and materials such as enamel, PVDF, FKM, EPDM and stainless steel are used to ensure long life and chemical compatibility while a wide assortment of electrodes allows deployment into virtually all types of fluids.

60

Brkert | Sensors, Transmitters and Controllers

pH/ORP

61

pH/ORP Measuring Principles


pH measurement with glass electrode The hydrogen ion concentration (pondus hydrogenii or pH value) in an aqueous solution generates a potential difference at a measuring electrode, pH-sensitive glass diaphragm, with respect to a reference electrode (Ag/AgCl). This voltage is measured by a high-impedance pH measuring instrument and converted to a pH value. The relationship between pH value and voltage is linear, with a slope of 59.16 mV/pH. The slope is temperature- dependent and is compensated for by an integrated temperature sensor. Brkert pH measuring instruments can be used in virtually all fluids on which pH measurement is required, depending on the selection of electrodes. The option of selecting between a compact device with display or a remote version with remote display ensures that the optimum solution is available for virtually any application. pH measurement with enamel electrode The 8201 pH sensor works as a single-rod measuring cell. The measuring electrode and reference electrode are combined in one element. An enameled steel pipe is used as the basic carrier. The measuring electrode is created by attaching an ion-sensitive enamel layer (yellow) with metallic voltage conductor (metal ring, positioned in the non-conductive blue enamel carrier layer). An ion exchange of H+ ions and Na+ ions takes place on the surface (gel layer) of this enamel layer. The Ag/AgCl reference electrode is located in the interior of the enamel pipe filled with electrolyte. A ground ceramic diaphragm is pressed into the lower end of the pipe. Voltage transfer takes place when the electrolyte makes contact with the measuring solution via the annular gap of the ground diaphragm. A Pt1000 for temperature compensation is also integrated in the sensor. The electrolyte used is 3-molar KCI, stored in a separate electrolyte vessel and permanently connected to the electrode via a small tube. The pressure of the electrolyte vessel is maintained slightly above process pressure. Calibration Electrodes cannot be produced with exactly identical characteristics. Offset and slope will vary with time and manufacturer that produce electrodes with different nominal values. The calibration matches the pH meter to the current characteristics of the electrodes. For this purpose a solution with a precisely known pH has to be used. The calibration process is generally performed by measuring in two different buffer solutions. This enables both offset and slope to be determined.
mV/ pH
mV/ pH

ORP measurement The oxidation-reduction potential electrode measures the potential of a solution on the basis of the presence of specific ions (e. g., CL or O3). It is the tendency of a chemical species to gain or lose electrons at a noble metal electrode. This potential occurs between a metallic measuring electrode (platinum or gold) and a reference electrode (Ag/AgCl). ORP is usually measured in millivolts. It provides information on the oxidizing or reducing capability of the solution. Similar to pH measuring instruments, the same devices can be selected due to the similarities of the +/-2000mV used for both the compact version and remote transmitters and controllers.

Temperature compensation The pH of a solution is a function of temperature. If the temperature changes, so does the pH, even though the concentration of the acid or base causing the pH remains constant. With temperature, the sensitivity (voltage change per pH unit) changes. Temperature compensation is a way of converting the pH at the measurement temperature to the pH at a reference temperature. The reference temperature is almost always 25C (77F). For example: Slope at 25C (77F): 59.16 mV/pH Slope at 100C (212F): 74.04 mV/pH This dependence is permanently compensated for with the integrated temperature probe, thus the values are always comparable.

mV/ ORP

Basically 3 possibilities of calibration procedures are possible: One-point calibration (only the pH equivalent to the buffer solution is known) offset and slope can not necessarily be
Inner electrolyte (KCL solution, pH7) Reference electrode (Silver chloride AgCI) Electrolyte (buffer solution, pH7) Diaphragm Metal electrode (Platinum wire)
3+

Inner electrolyte (KCL solution, pH7) Reference electrode (Silver chloride AgCI) Electrolyte (buffer solution, pH7) Diaphragm Measuring electrode (AgCI) pH sensitive glass membrane Gel layer
H+ H
+

Supply electrolyte Reference electrode (Ag/AgCI) Reference electrolyte Steel pipe pH sensitive enamel layer Metal contactring
H+ H+ H+ H+

determined unless a buffer solution of 7 is use. Product calibration (calibration with sampling) Two-point (Offset and slope can be detected)

H+ H
+

Enamel coating Ceramic diaphragm

Fe

2+

Fe

Principle of pH-measuring with glass electrode

Principle of pH-measuring with enamel electrode

Principle of ORP- measuring with glass electrode

62

Brkert | Sensors, Transmitters and Controllers

pH/ORP

63

pH/ORP Range

PID Controller

Alarm Relay

Output 4 - 20 mA
4 ... 20

Relay Switch

Transistor

Remote transmitter

Wall mount

8285

7800

8205 C

8206 T

8611
4x

8620
4x
4 ... 20

Rail mount

4 ... 20

2x 3x
4 ... 20

2x

4 ... 20

4 ... 20

5x 4x

2x
4 ... 20

6x 4x 8x

2x

Panel mount

8205 C

8206 T

8619

4x

Compact transmitter
8202

2x
4 ... 20

2x

Sensor

8201

8200

8205 C
2x

7800

4 ... 20

2x

pH/ORP

Fitting
8201

S020

S022

Insertion Fittings

Insertion Fittings

64

Brkert | Sensors, Transmitters and Controllers

pH/ORP

65

pH/ORP Features

Type 8200

Type 8201

Type 8202-pH

Type 8202-ORP

Type 8205

Type 8206

Fluidic characteristics Measuring range Fluid pressure in bar Fluid temperature in C Material of wetted parts Sensor Seal Body Temperature compensation 014 pH See P/T chart pages 78/79 See P/T chart pages 78/79 0 12 pH Vacuum ..... 6bar 0 140C (284F) -216 pH See P/T chart pages 78/79 See P/T chart pages 78/79 -2000 2000 mV See P/T chart pages 80/81 See P/T chart pages 78/79 0 14 pH See P/T chart pages 78/79 See P/T chart pages 78/79 -15751575 mV See P/T chart pages 78/79 See P/T chart pages 78/79

PP, PVC, PVDF, SS FKM, EPDM PVC, PP, PVDF, SS PT 1000

Enamel, ceramic EPDM Stainless steel PT 1000

PVDF, SS EPDM PVC Automatic with PT 1000 G 1 " (S022) S022

PVDF, SS EPDM PVC Automatic with PT 1000 G 1 " (S022) S022

PVDF, SS FKM, EPDM PVC, PP, PVDF, SS Automatic with PT 1000 G 2" (S020) S020

PVDF, SS FKM, EPDM PVC, PP, PVDF, SS Automatic with PT 1000 G 2" (S020) S020

Process connection Fitting type Electrical characteristics Basic function Output Display Compatible transmittes Specifics

G 2" (S020), G 1" (thread) S020

Various hygienic clamps, Ingold 8201

Sensor pH/ORP in mV-Signal for pH/ORP No Remote 8205

Sensor Analog mV-Signal for pH

Transmitter, Switch 2x 4 20 mA, 2x Transistor Yes, removable

Transmitter, Switch 2x 4 20 mA, 2x Transistor Yes, removable Integrated

Transmitter, Switch, Controller 1x 4 20 mA, 3x Relay, 2x Transistor Yes Integrated Panel and Wall mounted

Transmitter, Switch 1x 4 20 mA, 2x Relay Yes Integrated Panel and Wall mounted

Remote 8285 CIP-compatible, Inline sterilizable (SIP)

Integrated

66

Brkert | Sensors, Transmitters and Controllers

pH/ORP

67

pH/ORP Selection Help

Electrode Fluids

Logotrode pH 120 Clean drinking water cooling water aquarium swimming-pool ...

Unitrode pH 120 Contaminated effluent rinse water cooling water electro-plating paints cosmetics Containing sulfides / proteins tannery animal breeding effluent foodstuffs cosmetics biotechnology

Ceratrode pH 120 High pressure, high flow rate applications

Plasmatrode pH 120 Economical probe for drinking water, aquarium, swimming-pool

Logotrode O.R.P. 120 Clean cooling water waste water or slightly contaminated

Unitrode Plus O.R.P. 120 Clean drinking water aquarium swimming-pool Contaminated effluent rinse water cooling water electro-plating paints With low conductivity pure rain water > 2 S/cm Containing sulfides / proteins tannery animal breeding effluent foodstuffs cosmetics biotechnology

8201, enamel electrode Inline measuring in food and beverage applications CIP In process CIP cleaning SIP In process steam sterilizing

Flat pH Contaminated-viscous, suspended solids, small volumes, paints, cosmetics, foodstuffs

Flat ORP Contaminated-viscous, suspended solids, small volumes, paints, cosmetics, foodstuffs

Measuring range Fluid pressure Fluid temperature Ambient temperature Operation Storage

2 14 pH 0 - 6 bar (87psi) -10 to +60C (140F) 0 to +60C (140F) 4 to +30C (86F) 2 S/cm See P/T chart p. 78/79 1 single pore polymer

0 14 pH 0 - 6 bar (87psi) 0 to +130C (266F) 0 to +60C (140F) 4 to +30C (86F) 2 S/cm See P/T chart p. 78/79 2 single pore polymer

0 14 pH 0 - 16 bar (232 psi) 0 to +130C (266F) 0 to +60C (140F) 4 to +30C (86F) 50 S/cm See P/T chart p. 78/79 3 HP ceramics gel

0 14 pH 0 - 6 bar (87psi) -10 to +40C (104F) 0 to +60C (140F) 4 to +30C (86F) 2 S/cm See P/T chart p. 78/79 1 single pore polymer

-2000 +2000 mV 0 - 6 bar (87psi) -10 to +50 (122F) 0 to +60C (140F) 4 to +30C (86F) 2 S/cm See P/T chart p. 78/79 1 single pore polymer

-2000 +2000 mV 0 - 6 bar (87psi) 0 to +130C (266F) 0 to +60C (140F) 4 to +30C (86F) 2 S/cm See P/T chart p. 78/79 2 single pore polymer

0 - 12 pH 0 - 6 bar (87psi) 0 to +140C (284F) 0 to + 50C (122F)

0 - 14 pH 0 - 6 bar (87psi) 0 to +80C (176F) 0 to 60C (140F) 4 to 30C (86F)

2000 mV 0 - 6 bar (87psi) 0 to +80C (176F) 0 to 60C (140F) 4 to 30C (86F) 50 S/cm 3.5 bar at 80C 1 double junction Acrylamide gel (KNO3, 3.5 mol KCL-AgCL)

Minimal conductivity Max. pressure at max. temperature No. of diaphragms Diaphragms Reference electrolyte

2 S/cm 6 bar at 140C 1 grinding diaphragm Liquid (3 mol KCL)

50 S/cm 3.5 bar at 80C 1 double junction Acrylamide gel (KNO3, 3.5 mol KCL-AgCL)

68

Brkert | Sensors, Transmitters and Controllers

Global Expertise

69

Conductivity
Conductivity tells us the amount of dissolved solids there is in a solution and is one of the most important and common analytical measurements in the process environment. Its applications range from determining the quality of baby food to the prevention of scale in a boiler. It can measure ultra-pure water in a pharmaceutical facility or metal ions in a plating process. Brkert understands the broad scope and accuracy requirements of your individual process whether your needs require inductive principles, where no metal contacts the media, or the more common principle where contacting electrodes determine media properties using a direct resistive measurement. Conductivity is measured by a two main principles (conductive and inductive) which are visually explained in in the next pages. Whichever you choose, Brkert sensors have common electrical and process interfaces with pH/ORP transmitters and controllers. Conductivity, pH and ORP have similar menus, displays, teach-in and volumetric calibration functions and all the materials have been chosen carefully to fit common applications using PEEK and PVDF to ensure long life and chemical compatibility.

70

Brkert | Sensors, Transmitters and Controllers

Conductivity

71

Conductivity Measuring Principles


Conductivity is a measurement of the ability of a solution to conduct an electric current. For metals the conductivity is given by the electrons. In fluids the number of ions such as metal or salt ions have direct influence to the conductivity. Higher ionic concentration yields higher conductivity. There are basically 2 measuring principles: The conductive principle and the inductive principle. Common to both is that the measuring device produces an alternating electrical voltage between 2 electrodes. Dependending on the conductivity, a direct proportional current flow will be induced. The applied voltage generates a current that is determined by the resistance of the medium (Ohms law). A second influence to the measured value is the cell constant of the measuring cell itself. The cell constant describes the geometry of the electrodes by distance L between the electrodes and the measuring area A and is defined by its quotients K=L/A. The conductivity of the solution is calculated on the basis of this known cell constant K and by measuring the generated current. Conductive conductivity 2 electrode cell The measuring of the conductivity can be done with 2-electrode cells or 4-electrode cells. The electrodes are in direct contact with the medium. In a traditional 2-pole cell, an alternating current is applied between the 2 poles and the resulting voltage is measured. In order to be able to cover a broad conductivity range, measuring fingers with various cell constants are used. The lower the conductivity, the lower the cell constant must be. The conductivity of ultra-pure water up to concentrated solutions can be measured depending on the cell constant selected. Measuring cells with cell constants K=1, K=0.1 and K=0.01 are available. A PT1000 temperature sensor is integrated for temperature compensation. Conductive conductivity 4 electrode cell In a 4-pole cell, a current is applied to two opposite electrodes (current electrodes) in such a way that a constant potential difference is maintained between the other two electrodes (potential electrodes). As this voltage measurement takes place with a negligible current, these two potential electrodes are not polarized. Having no polarization effect enables the sensor to measure with one cell constant in a very large conductivity range. Inductive conductivity An inductive conductivity cell consists of two coils: a field coil and a receiver coil. The coils are integrated in a fingershaped housing. A bore is routed through the finger and the coils are integrated into it. The fluid encloses the finger and flows also through the bore. A sinusoidal AC voltage stimulates the field coil. This produces a current field in the fluid due to the conductivity of the fluid. This current field generates a voltage in the receiver coil. By measuring this voltage and knowing the cell constant, it is possible to determine the conductivity. A temperature sensor is integrated in the tip for temperature compensation to get a highly accurate and reliable 4-20mA output. This measuring method allows use in very problematic fluids. Owing to separation of the medium, all that needs to be ensured is that the housing has adequate resistance if used in such media. Since the measuring electrode has a very broad measuring range, different cell constants are not required. Use of the device is, however, not possible in very pure media since no measured value can be detected below a specific conductivity.

AC
A AC D D A

AC

4-20mA Output

4-20mA Output

4-20mA Output

Primary coil

Secondary coil

Induced electrical current field Temperature sensor Electrodes Electrode surface A Electrodes pair for current measuring Electrodes pair for AC-voltage supply Temperature sensor Fluid Temperature probe

Distance L

Conductive principle, 2-pole electrode

Conductive principle, 4-pole electrode

Inductive principle

72

Brkert | Sensors, Transmitters and Controllers

Conductivity

73

Conductivity Range

PID Controller

Alarm Relay

Output 4 - 20 mA
4 ... 20

Relay Switch

Transistor

Remote transmitter

Wall mount

8225

8611
4x
4 ... 20

8620
4x
4 ... 20

8285

Rail mount
4 ... 20

5x 4x 8x

4 ... 20

2x 3x

6x 4x

8619
4 ... 20

6x 4x 4x

Panel mount

8225

8619

4x

Compact transmitter
8223
4 ... 20

8226
2x
4 ... 20

8222

4 ... 20

Sensor

8220

8221

conductive

inductive S020 S022

conductive

Fitting

Insertion Fittings

Insertion Fittings

74

Brkert | Sensors, Transmitters and Controllers

Conductivity

75

Conductivity Features

Type 8220

Type 8221

Type 8222

Type 8223

Type 8226

Fluidic characteristics Measuring range Fluid pressure in bar Fluid temperature in C Max. pressure at max. temperature Wetted parts Sensor Seal Body Temperature compensation Process connection Fitting type Electrical characteristics Basic function Output signal Output value Display Compatible transmitters No Type 8225 No Type 8285 Sensor Analog raw signal Sensor Analog raw signal Sensor, Transmitter, Switch 2x 4 20 mA, 2x NPN/PNP Conductivity and temperature Yes Integrated Sensor, Transmitter, 4 20 mA Conductivity or temperature No Integrated Sensor, Transmitter, Switch 4 20 mA, relay Conductivity or temperature Yes Integrated 0,05 S/cm to 200 mS/cm max. 10 bar (145psi) -15 to 100 C (212F) See P/T chart pages 78/79 0,1 S/cm to 500 mS/cm max. 10 bar (flat electrode) (145psi) -20 to 150 C (302F) Insertion 6 bar at 135 C Flush 10 bar at 150 C PEEK, SS EPDM Stainless steel PT 1000 Various hygienic clamps Clamp ", 2" Varivent 0,05 S/cm to 10 mS/cm max. 16 bar (232psi) -20 to 150 C (302F) See P/T chart pages 78/79 10 S/cm to 1 mS/cm max. 6 bar (87psi) -10 to 80 C (176F) See P/T chart pages 78/79 0,05 S/cm to 200 mS/cm max. 6 bar (87psi) -15 to 120 C (248F) See P/T chart pages 78/79

PVDF, SS FKM, EPDM Br, SS, PVC, PP, PVDF PT 1000 G 2" (S020) S020

PVDF, SS EPDM PVC, PP, PVDF Automatic with PT 1000 G 1 " (S022) S022

PP, PVDF, PEEK EPDM Br, SS, PVC, PP, PVDF Automatic with PT 1000 G 2" (S020) S020

PP, PVDF, PEEK FKM, EPDM Br, SS, PVC, PP, PVDF Automatic with PT 1000 G 2" (S020) S020

76

Brkert | Sensors, Transmitters and Controllers

Conductivity

77

Conductivity Selection Help


The selection of conductivity electrodes depends on the conductivity to be measured. The below figure shows an overview of the available conductivity sensors and the possible conductivity range. Conductivity of various concentrated and aqueous solutions The two diagrams provide an overview of the conductivity values of solutions frequently used.

S cm 0.9 0.8 M cm K cm 0.7 0.6 0.5 0.02 0.01 0.005 0.005 0.002 0.002 50 20 10 0.5 0.2 0.1 0.05 0.02 0.01 0.5 0.2 0.1 0.05 0.4 0.3 0.2 0.1 0 Type 8220/8222 Type 8220/8222 K= 0.01 Type 8226 Type 8223 Type 8221 S cm 200 180 160 50 200 500 2000 0.02 0.05 0.2 0.5 2 5 20 50 200 500 2 5 20 140 120 100 Ultra-pure water Pure water Industrial water Effluent Concentrated solutions 80 60 40 20 0 0 10 20 30 40 50 60 70 80 90 100 C mg/l Ca(OH2) H2SO4 HCI NaOH HNO3 Na2CO3 MgCI2 K= 0.1 0 10 20 30 40 50 60 70 80 90 100 KCI NaOH C % - by - weight HNO3 H2SO4 KOH 5 2 1 1 HCI

Type 8220 Type 8220/8222 K= 1.0

K = 10

Conductivity of different fluids in dependance of the concentration. (Concentration in % by weight)

CaCL2 NaCL Na3PO4 KCL CaSO4 Na2SO4 KNO3

S/cm

mS/cm

Conductivity of different fluids in dependance of the concentration. (Concentration absolute in mg/l)

78

Brkert | Sensors, Transmitters and Controllers

Conductivity

79

Process Connection for pH / ORP / Conductivity Selection Help


The pressure resistance of plastics drops with increasing medium temperature. This dependence is shown for different sensor types in relation to the plastic materials, temperature and pressure.

Pressure / temperature chart for Sensors with Fitting S022


A (pH/ORP): Type 8202 with PVDF nut

Pressure / temperature chart for Sensors with Fitting S020


Type 8226 Type 8223 A (Type 8220, 8225) Pressure [psi] [bar] 145 10 130.5 116 101.5 87 72.5 58 43.5 29 14.5 0 9 8 7 6 5 4 3 2 1 0 -10 +14 +10 +50 +30 +86 +50 +122 +70 +158 PP PN10 PP PN6 +90 +194 +110 +230 PVC PVDF PN10 Temperature Type 8205/8206 (Compact version) Type 8205/8206 (Remote version) Metal

Pressure [psi] [bar] 232 16 217.5 15 203 14 188.5 13 174 12 159.5 11 145 10 130.5 116 101.5 87 72.5 58 43.5 29 14.5 0 9 8 7 6 5 4 3 2 1 0 -20 -4 0 +32

A (Conductivity): Type 8222 with PVDF nut B: Type 8202, 8222 with PVC nut

PVC + PP

Metal fitting

PVC fitting Temperature +100 +212 +120 +248 +140 [C] +284 [F]

PVDF PN6

PP fitting +20 +60 +40 +104 +60 +140 +80 +176

+130 [C] +266 [F]

Max. pressure range 8223, 8226, 8205

80

Brkert | Sensors, Transmitters and Controllers

Conductivity

81

Process Connections for pH/ORP and Conductivity


Process connections for pH/ORP/Conductivity measuring Brkert distinguishes between 2 fitting variants to install the analytical sensors into the process: Fitting system S020 with G 2" nut Fitting system S022 with standard G1 " thread Insertion fitting system S020 Insertion series S020 fittings are available in plastic, brass or stainless steel. They consist of a connector with indentation, a plastic seal and a union nut for fixing the sensor in position. The connector is already permanently connected to a pipe fitting up to DN 50. A wide range of connection options for installation in a pipe are available (spigot, external thread, weld end, Triclamp or flange, etc.). In the case of nominal diameters from 65 to approx. 100 mm, it is advisable to use fusion spigots made of plastic. Individual connectors which can be welded in (stainless steel) are recommended for installation in tanks. Combining the S020 with sensor for pH, ORP or conductivity measurement Available fitting DN T-fitting S020 Available fitting DN DN 15 (") DN 65 (2") Combining the S022 adaptors with analytical ELEMENT transmitters for pH, ORP and conductivity measurement Adapter for standard plastic tees (PVC or PP) Welding tab for stainless steel tees or direct mounting into bigger pipes or vessels Screw-on for plastic pipes or plastic vessels PVC or PP Conversion kit for tee fittings S020 DN 15 (") DN 32 (1")
DN32 (DN6 with reduction) to DN100 with tee fittings

Insertion fitting system S022 Insertion series S022 fittings are available in PVC, PVDF and PP. They consist of a metric or ASTM G 1 " thread for connecting the Insertion sensors 8202 or 8222.

DN 100 (4")

Welding tab S020

DN 50 (2")

DN 200 (8")

DN 32 (1")

DN 100 (4")

DN32 (tee fitting) or bigger (consider min. immersion depth)

Fusion spigot S020

DN 65 (2")

DN 200 (8")

DN 50 (2")

DN 100 (4")

Process connection G or NPT 1 " (consider min. immersion depth)

ph/ORP/Conductivity Types 8200 - 8205 - 8206 - 8220 8223 - 8225 - 8226


For detailed information's see datasheet Type S020.

DN 15 (")

DN 200 (8")

DN 65 (2")

For detailed information's see datasheet Type S022.

Installation example of a finger sensor in fitting S020

Installation example of a finger sensor in fitting S022

82

Brkert | Sensors, Transmitters and Controllers

Pressure

83

When the Pressure is on


Through our various applications we have assembled a range of pressure sensors which fit both within complete control loops and our customized system solutions. From biotech to surface technology and from water treatment to the boiler room we cover the applications of our core customers with a complete range of pressure switches and transmitters designed with ruggedness, durability and accuracy in mind.

Pressure Measuring Principles


Pressure sensors are used for control and monitoring in thousands of everyday applications and are used to indirectly measure other variables such as fluid flow, speed, and level. The pressure transducer translates the mechanical effect of force per unit area by generating a signal as a function of the pressure imposed. This signal, when conditioned and amplified becomes a standard industrial signal such as 4-20mA or 0-10VDC. The basic transducer is made from a strain gauge which makes use of the changes in resistance that

The measuring instruments output are a standardized 4-20mA or a voltage output and are easily installed, commissioned and calibrated. Design and materials enable use in virtually all purities, viscosities and temperatures of fluids from ultrapure water to effluent and from molasses to helium in standard, hygienic or explosive environments. Our diaphragm seals, supplied with relevant certification, protect our instruments from extremely aggressive, toxic, abrasive or high temperature fluids and are appreciated and recognized internationally for more difficult applications. When integrated with our control valves and PID controllers we can control loops from the pressures associated with tank level measurement to hundreds of atmospheres and our material selection and quality ensures that you have control under pressure.

some materials experience due to change in its stretch or strain. Making use of the change in conductivity of material when experiencing different pressures sounds simple but when zero, span, miniturization, linearity, temperature and durability are essential there can be no corners cut. Strain gauge type sensors can vary drastically in technology, design, performance, application suitability and cost. From the many technologies available we have produced a range of gauge and absolute pressure instruments with accuracies to 0.1% which fit our global customers requirements from gas handling to steam technologies. Our principles mean that we deliver stable, reliable instruments and control loops to quickly meet your project demands with certificates of calibration and traceability.

Output signal Strain gages

Fluid pressure

Exagerated flex to show compression / tension

0 15 mV

Ceramic bar or stainless steel diaphragm

84

Brkert | Sensors, Transmitters and Controllers

Pressure

85

Pressure Range
Explanatory information on measuring range turn-down Certain pressure measuring instruments allow the nominal pressure measuring range to be turned down to 1/20 (e. g., a nominal range of 0 - 10 bar can be reduced to 0 - 0.5 bar). The accuracy decreases as the turndown factor increases. The following applies as a general rule: down <= 1/5: No change in accuracy Turn Turn down > 1/5: New accuracy = nominal accuracy x (turn-down factor /5) (e. g., turn-down 1/20, nominal accuracy 0.15 %, new accuracy = 0.15 x 20/5 = 0.6 %)
4 ... 20

Output 4 - 20 mA
4 ... 20

Relay Switch

Transistor

Remote transmitter

Valve mount

8611
4x

8693
4 ... 20

Wall mount

4x

Rail mount

8619

4 ... 20

6x 4x

8620

4 ... 20

5x 4x

Measuring range turn-down


Output signal mA

Panel mount

4x

Compact
20 Reduced measuring range

transmitter

8311

8314

8323

8327

8326

Nominal measuring range

4 ... 20

4 ... 20

4 ... 20

4 ... 20

4 ... 20

4 Low 0,5 High 10 Pressure

Pressure switch

8311

Fitting

Standard fitting with G- or NPT-Connection

Multiple process connections: G, NPT, Flush, EHEDG, Clamp

86

Brkert | Sensors, Transmitters and Controllers

Pressure

87

Pressure Features
Type 8311 Type 8314 Type 8323 Type 8327 Type 8326

Fluidic characteristics Measuring range Measuring principle Materials coming into contact with media Fluid properties Max. medium temperature Clean Contaminated Hot or aggressive Hygiene Electric characteristics Basic function Switch Transmitter Transmitter in accordance with ATEX Output Transistor (max. 0.7 mA/80 V DC) Relay (max. 3 A/250 V A G) 4 - 20 mA ASI bus Supply voltage Equipment features 10 - 30 V DC Display Keypad Bargraph Teach-in calibration Simulation Hysteresis mode Window mode Design Expansibility Compact device Stand alone With Brkert remote electronics To PLC or other external electronics 0 to 50 bar (725psi) Ceramic measuring cell Stainless steel, FPM 100 C (212F) 0 to 100 bar (1450psi) Ceramic measuring cell Stainless steel, FPM -15 to 125 C (257F) 0 to 25 bar (362psi) Thin filmstr. gauge piezoresistive Stainless steel, FPM -80 to 100 C (212F) 0 to 16 bar (232psi) Thin filmstr. gauge piezoresistive Stainless steel, FPM -80 to 100 C (212F) 0 to 40 bar (580psi) Thin filmstr. gauge piezoresistive Stainless steel, FPM -30 to 105 C (221F)

With flush diaphragm With pressure transm. With flush diaphragm EHEDG

With pressure transm.

With flush diaphragm With pressure transm. With flush diaphragm EHEDG

With flush diaphragm With pressure transm. With flush diaphragm EHEDG

With flush diaphragm

With flush diaphragm EHEDG

88

Brkert | Sensors, Transmitters and Controllers

Temperature

89

Hot Ideas and Cool Solutions


Temperature is often cited as the most commonly controlled process variable and it is certainly everyday business for us to help our customers achieve success in their temperature control loops in either heating or cooling systems. The heat exchange process always relies on accurate temperature monitoring, switching and control. We have integrated thousands of temperature control solutions in factories and on process skids around the world and we understand the intricacies of achieving optimum results. Our range of temperature sensors, switches and transmitters is configured to provide you peace of mind. As we need to offer long term durability and reliability. The basis for all our temperature measurements is the Pt100 sensor. Stainless steel design enable application in virtually all purities, viscosities and pressures of fluids from simple recycled cooling water to burner gases. When integrated with our control valves and PID controllers we produce perfect, fast response temperature loops. Inherent modularity ensure you can choose a sensor, a transmitter, a thermowell, a display or a complete control system to meet your most demanding application. Whether you are cooling an injection molding process or pasteurizing orange juice we can help you realize a hot idea or produce a cool solution.
4 Permissible devision 3 2 1 0

Temperature Measuring Principles


Resistance temperature sensors (Pt100 technology) is proven in providing the durability necessary in the industrial processes where Brkert helps its customers. While thermocouples use the Seebeck effect to generate a voltage, resistance thermometers use electrical resistance and require a power source to operate. Resistance thermometry utilizes the temperature dependence of the electrical resistance of metals. The electrical resistance of metals increases with increasing temperature. This Positive Temperature Coefficient (PTC) is well understood in platinum which is why the Pt100 is the basis for our measurements. In order to measure the resistance of the sensor, the voltage drop across the sensor is measured while a current of 1mA flows through the circuit. This simple two-wire circuit also measures the electrical resistance of the cables and therefore three-wire circuits are normally employed in industrial environments to eliminate this error. Platinum offers high chemical resistance, good reproducibility of the electrical properties and simple processing. The nominal value of a PT100 sensor is 100 at 0 C. This raw resistance measurement can be routed right to one of our PID enabled control valves or can be amplified to produce a standard 4-20mA signal or can be used to switch a relay or though hardware onto a fieldbus.

Permissible devision in accordance with DIN EN 60751 2 1,5 1 0,5 0 Permissible devision Type B C Type B

-200 -100 0 100 200 300 400 500 600 700 800 Temperature C PT 100 resistance characteristic 400 350 300 250 200 150 100 50 -400 -200 0 200 400 600 800 1000

0 C 100,00 0,3 C PT100 2-wire

Resistance in

0 C 100,00 0,3 C PT100 3-wire

Temperature C

90

Brkert | Sensors, Transmitters and Controllers

Temperature

91

Temperature Range

PT 100

Output 4 - 20 mA
4 ... 20

Relay Switch

Transistor

Temperature Features

Remote transmitter

Type 8400 Valve mount 8611 8400 8693


4 ... 20

TST001

Wall mount

4x

4 ... 20

4x

Rail mount

4 ... 20

8619

4 ... 20

6x 4x

8620

4 ... 20

5x 4x

Fluidic characteristics Measuring range Measuring principle -40 to +125C (257F) PT 100 PN 16 PN 16 max. 200C (392F) PT 100 PN 16

Panel mount

4x

Compact transmitter
8400

Sensor material Fluid properties

Stainless steel Brass Clean Contaminated

Electric characteristics
4 ... 20

Basic function

Switch Sensor Transmitter

Output

Transistor Relay (max. 3 A/250 V A G)

Pressure switch

8400

TST001

4 - 20 mA ASI bus Resistance Supply voltage Equipment features None 10 - 30 V DC Display Keypad Teach-in calibration Simulation Hysteresis mode Window mode Design Compact device Control panel installation Field device

Fitting

Standard fitting with G- or NPT-Connection

92

Brkert | Sensors, Transmitters and Controllers

Global Expertise

93

Transmitters and Controllers


A large range of sensors needs an optimum offering of transmitters and controllers. Our transmitters take the raw signals from the sensors and amplify or convert them into standard industrial signals or digital information while displaying the process variable as clearly as possible. Our controllers become the heart of reliable loops whether they are positioned at the sensor, in a panel, on a wall or integrated onto a control valve. Its is that flexible and that simple. With multiple channels, relay outputs and protocols such as RS485, Profibus, and Ethernet as standard we offer solutions for all your process variables. Data logging, process tune, digital calibration, SD card interfaces and specific user friendly programming for cooling towers, boilers and reverse osmosis means we can control pumps or valves, in real time, in any application. Each device fits inside an architecture arranged around common interfaces and communication structures which are characterized by similar menus, displays, materials and connections. You can decide when to centralize or decentralize intelligence and the interface with our valves is designed to be as simple as possible and complete PID flow loops can be made with just two components. Simplicity and flexibility from one source.

94

Brkert | Sensors, Transmitters and Controllers

Tranmitters and Controllers

95

Transmitter and Controller Range


Type 8620 mxCONTROL Multi-parameter controller designed to automate the control of rocess variables within a water treatment system (e.g. boiler, cooling tower or reverse osmosis system). Sophisticated electronics and state of the art control algorithms ensure that optimum process control is maintained at all times, with minimal operator intervention. It saves time and space by allowing parameType 8611eCONTROL Single Channel Universal Controller Thanks to its compact design, the universal 8611 controller is specially designed for compact control system applications. It is compatible with a wide range of proportional control valves and connects with an electro pneumatic servo-system for pneumatically actuated process control valves. The PI process controller is equipped with many additional functions. The actual process value can be supplied as one of three inputs; a standard current (4-20 mA), frequency or Pt100 signal directly to the universal controller. The process switching points can be set via a 4-20 mA signal or with the keypad. Type 1150 Multi Channel Universal Controller The type 1150 is a process and program controller with up to 8 controller channels or 4 program channels. The controller features up to 8 analog inputs and 6 logic input, as well as six expansion slots for switched or analog outputs. The Setup can easily be done with a program via PC. The layout of the screen templates can be individually adapted and adjusted. terization and data logging of a wide number of control variants via an SD card slot, USB connection or via an Ethernet interface. Up to eight functions can be performed simultaneously by utilizing up to 23 I/O points.

ELEMENT Range of Process Controllers A range of compact positioners and controllers for integrated mounting on pneumatically operated process can either control the loop or transmit process variables to centralized control. All the features of a separate controller or transmitter are ready inside the beautiful new ELEMENT design. Communications through 4-20mA, ASInterface or Profibus are standard allowing these unique valve mount controllers to save you time and money. Type 8205 pH Controller The pH controller is available in different models: Compact pH controller with integrated pH electrode  Remote pH controller, for panel or wall mounting, to connect to the Brkert Type 8200 pH sensor. (max. 10m) The pH controller is designed for use in static or dynamic process of pHcontrol. The output signals control a valve or a pump by means of pulses whose time duration or frequency is computed according to users parameters and the pH-value of the fluid.

Type 8619 MultiCELL Dual Channel Controller Brkerts 8619 transmitter/controller is the latest addition to Brkerts process control program. The 1/4DIN panel mounted controller incorporates a large backlit LCD display for viewing up to 6 possible process variables including up to two analytical instruments, two temperatures and up to 3 hall flow sensors. Additional input and output modules can be added to further enhance the controllers capabilities with additional 4-20mA and binary inputs and outputs. An SD card is standard for data logging and up/down loading of parameterization files.

Type 8285 Analysis Transmitter The 8285 modular process analysis system is designed to measure and process liquid analysis parameters. The base unit contains the power supply, signal outputs, binary inputs and the front with graphic display with backlighting. Three slots are available, which, depending on the applications, can be occupied with modules for pH, conductivity or also with a module with additional outputs. The hygienic, polished stainless steel enclosure version allows application in the field of biotechnology and in the pharmaceutical and chemical industries.

96

Brkert | Sensors, Transmitters and Controllers

Transmitters and Controllers

97

Transmitter and Controller Features

Type Mounting size Housing Display Controller type Power supply Controller channels Inputs Analog

8611 54x54x50mm1/16 DIN Cut out Wall-/Rail-/Panel- and Valve mount 8-digit, 2-line with backlight PI, 2-P control, cascade 24 VDC +/- 10% 1 channel (2 for ratio control) 4 (4-20mA, RTD)

8693 90x156mm Top mount on process valves 128x64 pixels, backlight PID control 24 VDC 1 channel Sensor (RTD, 4-20mA) Set point (0/4-20mA or 0-5/10V) 1 1 (Flow) 1 (0/4-20mA or 0-5/10V) 2

8619 DIN Cut out Panel mount 160x128 pixels 4 monochrome, backlight PID 12-36VDC 2 channels pH-Sensor ORP-Sensor PT1000 2 2 Up to 4 (4-20mA) Up to 4 transistor

8620 230x204x119mm Wall mount 128x64mm pixels, two colored backlight PID, cascaded, 2-Point 100..240 VAC 8 channels Up to 4 (4-20mA)Up to 4 (RTD)

1150 144x130x170mm DIN Cut out Panel mount 5 color screen, 320x240 pixels, backlight P, I, PD, PI, PID control, cascade 20-30VDC, 100-240 VAC 8 channels Up to 8 (4-20mA, 0-10V, RTD, Thermocouple) Up to 6

8205 126x120x90mm (Wallmount) Compact, Wall- or Panel mount 15x60mm, 8-digit LCD P, PI, PID 15-30VDC, 115/230 VAC 1 channel pH-Sensor, PT1000

8285 163x213x150 mm (Wallmount) Wall-/Pipe-/Panel mounting 240x160 pixels, LCD, backlight

24 230 V AC/DC 2 channel measurement 2 (pH & conductivity), PT1000

Digital Frequency Output Analog Digital Relay Interface Remarks

1 2 (Flow) 1 (4-20mA) 3 transistor (NPN or PNP)

Up to 4 Up to 4 4 (4-20mA) 4 transistor 5

1 transistor

Up to 8 (4-20mA, 0-10V) Up to 8 Up to 8 Profibus DP Customized pictures and text can be displayed. Configuration with Setupprogram.

1 (4-20mA) 2 transistor 1

2 (4-20mA)

RS485 on request Predefined Loops for Pressure, Temperature, Flow. Data for Sensor- and Solenoid control valves are memorized. Ratio Control function on request

Profibus, Devicenet Process controller and positioner in combination with Brkert process control valves

RS485 SD-Card for data logging & Configuration.

RS485, Ethernet Predefined Program modules for boiler water control, cooling tower control, RO-water control, Ion exchange control, conductivity and pH conrol. Configuration with Setup-program. SD-card for data logging & configuration

Static or dynamic pH control.

Modules for pH and conductivity. Measuring rejection rate for RO water.

98

Brkert | Sensors, Transmitters and Controllers

Pressure control of vessels for filling process


Set point PID controller

4-20 mA Pressure sensor

Typical Sensor Loop Applications


Flow control
Set point PID PID controller controller Process controller

Process control valve with positioner

4-20 mA (actuating value)

On/off valve Exhausting

Pressurizing

Low level detection Process

Frequency

PWM

Filling

Flow sensor

Solenoid control valve

process side

pH-control

Temperature control
Set point Temperature sensor (PT 100 or 4-20 mA signal)

Acid

Base

PID controller

Process control valve 2301 with minipositioner 8696

process side

Process water

PI or PID response

pH 7

Mixing of hot and cold water Level control


Set point PWM Level transmitter PID controller Solenoid control valve Set point 4-20 mA Solenoid control valve 2 PID controller 4-20 mA PWM Solenoid control valve 1 Temperature sensor (PT 100 or 4-20 mA signal)

100

Brkert | Sensors, Transmitters and Controllers

System Solutions

101

Added Value Systems


Brkert has a unique perspective in the process control and instrumentation industry as we are the only single brand which combines a complete range of valves, instruments, pneumatic actuation, networking and controllers from a single source. With our dedicated world-class engineers and our superlative manufacturing facilities we can deliver systems which meet your exact requirements. Your reliable Brkert sales consultant and our system engineers work in concert to ask the right questions and provide the right hardware. Transparent operations, up to date situation, review procedure, engineering change notices, portals through SAP and secure intranet are normal in our projects. For a world class system experience, insist on Brkert people to be part of your next project. Following our principle of one face to the customer, you have a competent, reliable consultant by your side at all times, who listens to your needs and presents a solution in your daily application language crossing conventional boundaries and creating synergies between industries in pursuit of your ideal solution. Systemhaus crews in Charlotte (USA), Suzhou (China), Dresden, Ingelfingen and Dortmund are continuously in innovation mode. They creatively engineer cost effective solutions to meet difficult process challenges for our customers. As a globally flexible, lean, focused and innovative company we are the partner of choice for fluid control systems in more than 35 countries. Whether you are in Stuttgart, Singapore, Chicago or Sydney, everywhere in the world, we are close to you and therefore know at first-hand about your specific tasks and problems.

01

02

03

04

05

Connect

Conceive & Innovate


Your project team starts working for you: from your reliable sales consultant, qualified industry specialists to dedicated system engineers Brkert puts the necessary experts together. For the entire duration of the project they work together, combining their experience and clarifying all the requirements in close cooperation with you to come up with a feasible draft of your solution within the shortest timeframe. CAD-created animations or simulations, combined with extended manufacturing, materials, tool design, construction and assembly knowledge enable us to provide a rough but firm production concept for your system at an early stage.

Plan& Specify
In Phase 3 the project is planned in detail. A specification sheet and refined solution concept are developed. This defines exactly what you expect from the system and what it must provide to ensure that all components meet your requirements. At the end of this phase you are presented with a detailed product definition, a production specification and precise commercial conditions and agreements. Structured project management based on open communication, effective coordination and thorough documentation ensures fast and reliable results.

Do & Check
Good communication, coordination and documentation at all project phases make sure that we are on the right track, developing the right solution, to allow us to quickly move on to prototyping. Thanks to the latest technology, we are able to build a prototype made of metal or plastic or a functional model to test flow for example within 24 hours. We provide you with samples; we perform tests and, of course, obtain all the necessary local and global approvals to make sure the system can go to production. From here we work in concert with one of our production facilities in Ingelfingen, Gerabronn, Criesbach, hringen or Triembach according to their individual core manufacturing competencies.

Complete
Our work does not end with the perfect delivery of components and systems. We offer a comprehensive program to our global clients interlinking services ranging from maintenance and service contracts, operator training and integrated logistics. Our customer service is available around the clock, offering support through internet, telephone or our qualified, experienced people at your site. We aim to provide only the utmost in customer experience. Something you will tell your friends about.

102

Brkert | Sensors, Transmitters and Controllers

Contacts at Brkert

103

Brkert Close to You


Germany Germany Germany North South America North andand South America North and South America
Argentina Argentina Argentina Brkert-Contromatic Argentina Brkert-Contromatic Argentina S.A. S.A.
Brkert-Contromatic Argentina S.A. Uruguay Centro Uruguay Uruguay 2602,2602, Centro Uruguay Norte,Norte, Uruguay 2602, Centro Uruguay Norte, P.B. Oficina 1, (B1643EKP) Beccar, P.B. Oficina 1, (B1643EKP) Beccar, P.B. Oficina 1, (B1643EKP) Beccar, Pcia. de Buenos ARGENTINA Pcia. de Buenos Aires, Aires, ARGENTINA Pcia. de Buenos Aires, ARGENTINA Tel:(0)11-5648-6350 +54 (0)11-5648-6350 Tel: +54 Tel: Fax:+54 +54(0)11-5648-6350 (0)11-5648-6355 Fax: +54 (0)11-5648-6355 Fax: +54 (0)11-5648-6355 E-mail: contacto.argentina@burkert.com E-mail: contacto.argentina@burkert.com E-mail: contacto.argentina@burkert.com

Sales Center Sales Center Sales Center Ingelfingen Ingelfingen Ingelfingen Brkert GmbH & Co. KG

Europe, continued Europe, continued Europe, continued


Finland Finland Finland Brkert Brkert Oy Oy
Brkert Oy Atomitie 5 Atomitie 5 Atomitie 5Helsinki FI-00370 FI-00370 Helsinki FI-00370 Helsinki Tel: +358 (0)207 412 550 Tel: +358 (0)207 412 550 Tel: (0)207 412 Fax:+358 +358 (0)207 412550 555 Fax: +358 (0)207 412 555 Fax: +358 (0)207 412 555 E-mail: sales.fi@burkert.com E-mail: sales.fi@burkert.com E-mail: sales.fi@burkert.com

Europe, continued Europe, continued Europe, continued


Turkey Turkey Turkey Burkert Contromatic Akiskan Kontrol Burkert Contromatic Akiskan Kontrol
Burkert Contromatic Akiskan Kontrol Sistemleri Ticaret Sistemleri Ticaret A.S. A.S. Sistemleri Ticaret A.S. 1203/8 Sok. No2-E 1203/8 Sok. No2-E 1203/8 Sok. No2-E TR-Yenisehir, TR-Yenisehir, Izmir Izmir TR-Yenisehir, Izmir Tel:(0)232-459 +90 (0)232-459 Tel: +90 53 9553 95 Tel: 53 95 Fax:+90 +90(0)232-459 (0)232-459 Fax: +90 (0)232-459 76 9476 94 Fax: +90 (0)232-459 76 94 E-mail: burkert@superonline.com E-mail: burkert@superonline.com E-mail: burkert@superonline.com

Asia Pacific, continued Asia Pacific, continued Asia Pacific, continued


China China China Burkert Contromatic (Suzhou), Co., Ltd. Burkert Contromatic (Suzhou), Co., Ltd.
Burkert Contromatic (Suzhou), Co., Ltd. (System House) Unit A5, Suhong Square (System House) Unit A5, Suhong Square (System House)West Unit A5, Suhong Square No. 81 Suhong No. 81 Suhong West Road Road No. Suhong Road SIP 81 Suzhou P.R.West China, 215021 SIP Suzhou P.R. China, 215021 SIP Suzhou P.R. China, 215021 Tel:512 +86 512 6265 Tel: +86 6265 8498 8498 Tel: +86 512 6265 8498 Fax:512 +866265 512 6265 Fax: +86 9337 9337 Fax: +86 512 6265 9337 Burkert Contromatic (Shanghai), Co., Ltd. Burkert Contromatic (Shanghai), Co., Ltd. Burkert Contromatic (Shanghai), Co., Ltd. (logistic and warehouse for BC China) (logistic and warehouse for BC China) (logistic and warehouse for BC China) Floor 2, block 6,Mingdong 166 Mingdong Floor 2, block 6, 166 Road Road Floor 2, block 6, 166 Mingdong Road Pudong New District Pudong New District Pudong New District Shanghai 201209, P.R. CHINA Shanghai 201209, P.R. CHINA Shanghai 201209, 9990 P.R. CHINA Tel:21-5863 +86 21-5863 Tel: +86 9990 Tel: +86 21-5863 9990 Fax:21-5863 +86 21-5863 Fax: +86 9968 9968 Fax: +86 21-5863 9968 E-mail: info.chn@burkert.com E-mail: info.chn@burkert.com E-mail: info.chn@burkert.com

Brkert GmbH & Co. KG Brkert GmbH & Co. KG 13-17 Christian-Brkert-Strae Christian-Brkert-Strae 13-17 Christian-Brkert-Strae DE-74653 Ingelfingen 13-17 DE-74653 Ingelfingen DE-74653 Ingelfingen Tel:(0)7940/10-91 +49 (0)7940/10-91 Tel: +49 111 111 Tel: 111 Fax:+49 +49(0)7940/10-91 (0)7940/10-91 Fax: +49 (0)7940/10-91 448 448 Fax: +49 (0)7940/10-91 E-mail: info@buerkert.de 448 E-mail: info@buerkert.de E-mail: info@buerkert.de

Japan Japan Japan Burkert Burkert Ltd. Ltd.

Sales Offices Sales Offices Sales Berlin Offices Berlin Berlin Brkert GmbH Co. KG Brkert GmbH & Co. & KG

Brazil Brazil Brazil Brkert-Contromatic Brkert-Contromatic Brasil Brasil Ltda. Ltda.

France France France BURKERT CONTROMATIC BURKERT CONTROMATIC SAS SAS

Brkert GmbH & Co. KG Paradiesstrae Paradiesstrae 206 b206 b Paradiesstrae 206 b DE-12526 DE-12526 BerlinBerlin DE-12526 Berlin Tel:(0)30/679717-0 +49 (0)30/679717-0 Tel: +49 Tel: Fax:+49 +49(0)30/679717-0 (0)30/679717-66 Fax: +49 (0)30/679717-66 Fax: +49 (0)30/679717-66

Dortmund Dortmund Dortmund Brkert GmbH Co. KG Brkert GmbH & Co. & KG

Brkert GmbH & Co. KG Holzener Strae Holzener Strae 70 70 Holzener Strae 70 DE-58708 Menden DE-58708 Menden DE-58708 Menden Tel:(0)2373/9681-0 +49 (0)2373/9681-0 Tel: +49 Tel: Fax:+49 +49(0)2373/9681-0 (0)2373/9681-50 Fax: +49 (0)2373/9681-50 Fax: +49 (0)2373/9681-50

Brkert Contromatic Inc. Service 5002 5002 SouthSouth Service Road Road 5002 South Service Road Burlington, Ontario L7L 5Y7, CANADA Burlington, Ontario L7L 5Y7, CANADA Burlington, Ontario L7L 5Y7, CANADA Tel: +1 905-632 Tel: +1 905-632 30 3330 33 Tel: +1 905-632 30 33 Fax: +1 905-632 Fax: +1 905-632 38 3338 33 Fax: +1sales.ca@burkert.com 905-632 38 33 E-mail: E-mail: sales.ca@burkert.com E-mail: sales.ca@burkert.com

Africa Africa Africa

South Africa South Africa South Africa Brkert Contromatic (Proprietary) Limited Brkert Contromatic (Proprietary) Limited

USAUSA USA BURKERT CONTROMATIC CORP. BURKERT CONTROMATIC CORP.

Netherlands Netherlands Netherlands Brkert Contromatic Brkert Contromatic BV BV

Frankfurt Frankfurt Frankfurt Brkert GmbH Co. KG Brkert GmbH & Co. & KG

Brkert GmbH & Co. KG Am Flugplatz Am Flugplatz 27 27 Am Flugplatz 27 DE-63329 Egelsbach DE-63329 Egelsbach DE-63329 Egelsbach Tel:(0)6103/9414-0 +49 (0)6103/9414-0 Tel: +49 Tel: Fax:+49 +49(0)6103/9414-0 (0)6103/9414-66 Fax: +49 (0)6103/9414-66 Fax: +49 (0)6103/9414-66

BURKERT CONTROMATIC CORP. Whitehall Park Drive, Suite 100 2915 2915 Whitehall Park Drive, Suite 100 2915 Whitehall Park Drive, Suite 100 Charlotte, NC 28273 Charlotte, NC 28273 , USA , USA Charlotte, NC 28273 , USA Tel: +1 704-504 Tel: +1 704-504 44 4044 40 Tel: +1 44 40 Fax: +1704-504 949-223 Fax: +1 949-223 31 9831 98 Fax: +1 949-223 31 98 E-mail: marketing-usa@burkert.com E-mail: marketing-usa@burkert.com E-mail: marketing-usa@burkert.com

Brkert Contromatic BV Computerweg 9 Computerweg 9 Computerweg 9 NL-3542 DP Utrecht NL-3542 DP Utrecht NL-3542 DP Utrecht Tel:(0)346-58 +31 (0)346-58 Tel: +31 10 1010 10 Tel: 10 10 Fax:+31 +31(0)346-58 (0)346-56 Fax: +31 (0)346-56 37 1737 17 Fax: +31 (0)346-56 37 17 E-mail: info@burkert.nl E-mail: info@burkert.nl E-mail: info@burkert.nl

Stuttgart Stuttgart Stuttgart Brkert GmbH Co. KG Brkert GmbH & Co. & KG

Europe Europe Europe

Norway Norway Norway Brkert-Contromatic Brkert-Contromatic A/S A/S


Brkert-Contromatic A/S Hvamstubben Hvamstubben 17 17 Hvamstubben 17 NO-2013 Skjetten NO-2013 Skjetten NO-2013 Skjetten Tel:63-84 +47 63-84 Tel: +47 44 1044 10 Tel: 44 10 Fax:+47 +4763-84 63-84 Fax: +47 63-84 44 5544 55 Fax: +47 63-84 44 55 E-mail: info@burkert.no E-mail: info@burkert.no E-mail: info@burkert.no

Brkert Contromatic (Proprietary) Limited 233 Albert 233 Albert AmonAmon Road Road 233 Albert Business Amon Road Millennium Millennium Business Park Park Millennium Business Park Meadowdale, Meadowdale, Meadowdale, Germiston Germiston Germiston ( Postal : P.O. Box 26260, East Rand 1462) (Postal : P.O. Box 26260, East Rand 1462) (Postal: P.O. Box 26260, East Rand 1462) SOUTH AFRICA SOUTH AFRICA SOUTH AFRICA Tel:(0)11-574 +27 (0)11-574 Tel: +27 60 0060 00 Tel: 60 00 Fax:+27 +27(0)11-574 (0)11-454 Fax: +27 (0)11-454 14 7714 77 Fax: +27 (0)11-454 14 77 E-mail: sales.za@burkert.com E-mail: sales.za@burkert.com E-mail: sales.za@burkert.com

Asia Pacific Asia Pacific Asia Pacific

Chengdu Burkert Contromatic (Shanghai), Co., Ltd. Burkert Contromatic (Shanghai), Co., Ltd. Burkert Contromatic (Shanghai), Co., Ltd. B 2nd zone, 2nd floor, B zone, floor, B zone, 2nd floor, DongFangGuangYi building DongFangGuangYi office office building DongFangGuangYi office building LongTan city industrial zone, 2nd section, LongTan city industrial zone, 2nd section, LongTan city industrial zone, 2nd section, East 3rd ring Rd. East 3rd ring Rd. East 3rd ring Rd. Chengdu, 610051 Chengdu, ChinaChina 610051 Chengdu, China 610051 8425 1435 Tel:28 +86 28 8425 Tel: +86 8425 1434,1434, 8425 1435 Tel: +86 28 1434, 8425 1435 Fax: +86 288425 8425 Fax: +86 28 8425 1560 1560 Fax: +86 28 8425 1560 Guangzhou Burkert Contromatic (Shanghai), Co., Ltd. Burkert Contromatic (Shanghai), Co., Ltd. Burkert Contromatic (Shanghai), Co., Ltd. 4, Dong Jun Plaza RoomRoom 1502,1502, TowerTower 4, Dong Jun Plaza Room 1502, Tower 4, Dong Jun Plaza 836 Dong Feng Road 828 - 828 836 -Dong Feng Road East East 828 - 836 Dong Feng Road East Guangzhou P.R. China, 510080 Guangzhou P.R. China, 510080 Guangzhou China, 510080 Tel:20 +86 20 P.R. 8769 Tel: +86 8769 8379,8379, 8767 8767 8703 8703 Tel: 20 8379, 8767 8703 Fax:+86 +86 208769 87671131 Fax: +86 20 87671131 Fax: +86 20 87671131 Shanghai Burkert Contromatic (Shanghai), Co., Ltd. Burkert Contromatic (Shanghai), Co., Ltd. Burkert Contromatic (Shanghai), Co., Ltd. 501/502 Xin Gai Nian Mansion RoomRoom 501/502 Xin Gai Nian Mansion Room 501/502 Xin Gai Nian Mansion Wu Zhong No.39No.39 Wu Zhong Road Road No.39 Wu Zhong Road Shanghai P.R. China, 200233 Shanghai P.R. China, 200233 Shanghai P.R. China, 200233 Tel:21 +86 21 6486 5110 Tel: +86 6486 5110 Tel: +86 21 6486 5110 Fax:21 +86 21 6487 Fax: +86 6487 4815 4815 Fax: +86 21 6487 4815 Shanghai Shanghai Guangzhou Guangzhou

Chengdu Chengdu

Malaysia Malaysia Malaysia BURKERT CONTROMATIC SINGAPORE PTE LTD BURKERT CONTROMATIC SINGAPORE PTE LTD
BURKERT CONTROMATIC Tingkat Kenari 6 SINGAPORE PTE LTD 2F-1, 2F-1, Tingkat Kenari 6 2F-1, Tingkat Kenari 6 Sungai Sungai Ara Ara Sungai Ara 11960 Penang, MALAYSIA 11960 Penang, MALAYSIA 11960 Penang, MALAYSIA Tel:(0)4-643 +60 (0)4-643 Tel: +60 5008 5008 Tel: +60 (0)4-643 5008 Fax:(0)4-643 +60 (0)4-643 Fax: +60 7010 7010 Fax: +60 (0)4-643 7010 E-mail: info.sin@burkert.com E-mail: info.sin@burkert.com E-mail: info.sin@burkert.com

Brkert GmbH Strae 4 & Co. KG UlmerUlmer Strae 4 Ulmer Strae 4 DE-70771 Leinfelden-Echterdingen DE-70771 Leinfelden-Echterdingen DE-70771 Leinfelden-Echterdingen Tel:(0)711/45110-0 +49 (0)711/45110-0 Tel: +49 Tel: +49 Fax: +49(0)711/45110-0 (0)711/45110-66 Fax: +49 (0)711/45110-66 Fax: +49 (0)711/45110-66

Austria Austria Austria Brkert-Contromatic G.m.b.H. Brkert-Contromatic G.m.b.H.


Brkert-Contromatic G.m.b.H. Diefenbachgasse Diefenbachgasse 1-3 1-3 Diefenbachgasse 1-3 AT-1150 AT-1150 Wien Wien AT-1150 Wien Tel:(0)1-894 +43 (0)1-894 Tel: +43 13 3313 33 Tel: 13 33 Fax:+43 +43(0)1-894 (0)1-894 Fax: +43 (0)1-894 13 0013 00 Fax: +43 (0)1-894 13 00 E-mail: info@buerkert.at E-mail: info@buerkert.at E-mail: info@buerkert.at

Australia Australia Australia BURKERT CONTROMATIC AUSTRALIA BURKERT CONTROMATIC AUSTRALIA PTY. PTY.
BURKERT LIMITED CONTROMATIC AUSTRALIA PTY. LIMITED LIMITED 15 Columbia Way, Norwest Business 15 Columbia Way, Norwest Business Park Park 15 Columbia Way, Norwest Business Park Baulkham Hills, NSW AUSTRALIA Baulkham Hills, NSW 2153,2153, AUSTRALIA Baulkham Hills, NSW 2153, AUSTRALIA Tel:2 +61 2 8853 Tel: +61 8853 6353 6353 Tel: 2 6353 Fax:+61 +61 28853 8853 Fax: +61 2 8853 6363 6363 Fax: +61 2 8853 6363 E-mail: sales.au@burkert.com E-mail: sales.au@burkert.com E-mail: sales.au@burkert.com

Zealand NewNew Zealand New Zealand BURKERT CONTROMATIC NEW ZEALAND BURKERT CONTROMATIC NEW ZEALAND
BURKERT LIMITED CONTROMATIC NEW ZEALAND LIMITED LIMITED 44 Rennie 44 Rennie Drive Drive 44 Rennie Drive Airport Auckland Airport Oaks, Oaks, Auckland 2022 2022 Airport Oaks, Auckland 2022 ZEALAND NEW NEW ZEALAND NEW ZEALAND Tel:(0)9-256 +64 (0)9-256 Tel: +64 77 3777 37 Tel: 77 37 Fax:+64 +64(0)9-256 (0)9-256 Fax: +64 (0)9-256 77 4777 47 Fax: +64 (0)9-256 77 47 E-mail: sales.nz@burkert.com E-mail: sales.nz@burkert.com E-mail: sales.nz@burkert.com

Mnchen Mnchen Mnchen Brkert GmbH Co. KG Brkert GmbH & Co. & KG

Poland Poland Poland Burkert-Contromatic GmbH Oddzial w Polsce Burkert-Contromatic GmbH Oddzial w Polsce
Burkert-Contromatic GmbH Oddzial w Polsce Bernardynska Bernardynska streetstreet 14 a 14 a Bernardynska street 14 a PL-02-904 Warszawa PL-02-904 Warszawa PL-02-904 Warszawa Tel:(0)22-840 +48 (0)22-840 Tel: +48 60 1060 10 Tel: 60 Fax:+48 +48(0)22-840 (0)22-840 6010 11 Fax: +48 (0)22-840 60 11 Fax: +48 (0)22-840 60 11 E-mail: buerkert@buerkert.pl E-mail: buerkert@buerkert.pl E-mail: buerkert@buerkert.pl

Brkert GmbH & Co. KG Elsenheimerstrae Elsenheimerstrae 47 47 Elsenheimerstrae 47 DE-80687 Mnchen DE-80687 Mnchen DE-80687 Mnchen Tel:+49 (0)89/829228-0 Tel:+49 (0)89/829228-0 Tel:+49 (0)89/829228-0 Fax:(0)89/829228-50 +49 (0)89/829228-50 Fax: +49 Fax: +49 (0)89/829228-50

Belgium Belgium Belgium Brkert Contromatic Brkert Contromatic NV NV

Brkert Contromatic NV Wijnegem Zone De Hoek Wijnegem Zone 1 De 1 Hoek Wijnegem Bijkhoevelaan 3 1 De Hoek Bijkhoevelaan 3 Zone Bijkhoevelaan 3 BE-2110 Wijnegem BE-2110 Wijnegem BE-2110 Wijnegem Tel: +32 89 0089 00 Tel:(0)3-325 +32 (0)3-325 Tel: +32 (0)3-325 89 Fax: +32 61 61 Fax:(0)3-325 +32 (0)3-325 6100 61 Fax: +32 (0)3-325 61 61 E-mail: BC-B@burkert.com E-mail: BC-B@burkert.com E-mail: BC-B@burkert.com

Portugal Portugal Portugal Tel: +351 212 898 Tel: +351 212275 898 275

Czech Rep.Rep. Czech Spain Spain Czech Rep. Spain Brkert-Contromatic G.m.b.H. organizacni slozkaslozka Brkert Brkert-Contromatic G.m.b.H. organizacni Contromatic S.A. S.A. Brkert Contromatic
Brkert-Contromatic G.m.b.H. organizacni slozka Krenova 35 35 Krenova Krenova 35 Brno CZ-602 00 Brno CZ-602 00 CZ-602 00 Brno Tel: +420 543-25 25 0525 05 Tel: +420 543-25 Tel: 543-25 25 Fax: +420 543-25 25 06 Fax:+420 +420 543-25 2505 06 Fax: +420 543-25 25 06 E-mail: obchod@burkert.cz E-mail: obchod@burkert.cz E-mail: obchod@burkert.cz

Tel: 212 898 Fax: +351 212 898 Fax:+351 +351 212276 898275 276 Fax: +351 212 898 276 E-mail: portugal@burkert.com E-mail: portugal@burkert.com E-mail: portugal@burkert.com Brkert Contromatic Avda. Avda. Barcelona, 40 40 S.A. Barcelona, Avda. Barcelona, 40 Despi, ES-08970 Sant Joan Barcelona ES-08970 Sant Despi, Joan Barcelona ES-08970 Sant Joan Despi, Barcelona Tel: +34 79 80 Tel:93-477 +34 93-477 79 80 Tel: +34 93-477 79 80 Fax: +34 79 8179 81 Fax:93-477 +34 93-477 Fax: +34 93-477 79 81 E-mail: spain@burkert.com E-mail: spain@burkert.com E-mail: spain@burkert.com

Victoria BURKERT CONTROMATIC AUSTRALIA BURKERT CONTROMATIC AUSTRALIA BURKERT CONTROMATIC AUSTRALIA PTY. LIMITED PTY. LIMITED PTY. LIMITED Unit 11/26-30 Howleys Unit 11/26-30 Howleys Road Road Unit 11/26-30 Howleys Road Notting Hill Victoria 3168 Notting Hill Victoria 3168 Notting Hill Victoria Tel: 1300 888 868 Tel: 1300 888 868 3168 Tel: 1300 888 Fax: 1300 888 076 Fax: 1300 888868 076 Fax: 1300 888 076
BURKERT CONTROMATIC AUSTRALIA BURKERT CONTROMATIC AUSTRALIA BURKERT CONTROMATIC AUSTRALIA PTY. LIMITED PTY. LIMITED PTY. LIMITED Unit 4/43 Sandgate Road Road Unit 4/43 Sandgate Unit 4/43 Sandgate Road Albion Queensland 4010 4010 Albion Queensland Albion Queensland 4010 Tel: 1300 888 868 Tel: 1300 888 868 Tel: 1300 888 868 Fax: 1300 888 076 Fax: 1300 888 076 Fax: 1300 888 076

Victoria Victoria

Philippines Philippines Philippines BURKERT CONTROMATIC PHILIPPINES, BURKERT CONTROMATIC PHILIPPINES, INC. INC.
PHILIPPINES, INC. 8467 WestCONTROMATIC Service Km. 14, Sunvalley 8467 BURKERT West Service Road, Road, Km. 14, Sunvalley West Service Road, Km. 14, Sunvalley South Superhighway, Paraaque City, 1700 South8467 Superhighway, Paraaque City, 1700 Superhighway, Paraaque City, 1700 MetroSouth Manila, PHILIPPINES Metro Manila, PHILIPPINES Metro Manila, PHILIPPINES Tel: +63 / 7764384 Tel:(0)2-7766071 +63 (0)2-7766071 / 7764384 Tel: Fax: +63 (0)2-7764382 Fax:+63 +63(0)2-7766071 (0)2-7764382/ 7764384 Fax: +63 (0)2-7764382 E-mail: info.rp@burkert.com E-mail: info.rp@burkert.com E-mail: info.rp@burkert.com

Queensland Queensland Queensland

Hong Kong Hong Kong Hong Kong Burkert Contromatic (China/HK) Limited Burkert Contromatic (China/HK) Limited

Suzhou Burkert Contromatic (Shanghai), Co., Ltd. Burkert Contromatic (Shanghai), Co., Ltd. Burkert Contromatic (Shanghai), Unit 11-12, 5th Floor, Block A Unit 11-12, 5th Floor, Block A Co., Ltd. Unit 11-12, 5th Floor, Block A No.5 Xinghan StreetStreet No.5 Xinghan No.5 Xinghan Street SIP Suzhou P.R. China, 215021 SIP Suzhou P.R. China, 215021 SIP +86-512-6265 Suzhou P.R. China, 215021 Tel: +86-512-6265 9881 Tel: 9881 Tel: +86-512-6265 9881 Fax: +86-512-6265 9882 Fax: +86-512-6265 9882 Fax: +86-512-6265 9882

Suzhou Suzhou

Singapore Singapore Singapore BURKERT CONTROMATIC SINGAPORE PTE LTD BURKERT CONTROMATIC SINGAPORE PTE LTD
BURKERT CONTROMATIC 51 Ubi Avenue 1, #03-14 51 Ubi Avenue 1, #03-14SINGAPORE PTE LTD 51 Ubi Avenue 1, #03-14 Paya Ubi Industrial Park Paya Ubi Industrial Park Paya Ubi Industrial Park Singapore 408933, SINGAPORE Singapore 408933, SINGAPORE Singapore 408933, SINGAPORE Tel: +65 2233 2233 Tel:6844 +65 6844 Tel: +65 6844 2233 Fax: +65 3532 3532 Fax:6844 +65 6844 Fax: +65 6844 3532 E-mail: info.sin@burkert.com E-mail: info.sin@burkert.com E-mail: info.sin@burkert.com

Denmark Denmark Denmark Brkert-Contromatic A/S A/S Brkert-Contromatic

Brkert-Contromatic A/S Hrkr 24 24 Hrkr Hrkr 24 DK-2730 Herlev DK-2730 Herlev DK-2730 Herlev Tel: +45 75 0075 00 Tel:44-50 +45 44-50 Tel: 75 Fax: +45 44-50 75 75 Fax:+45 +4544-50 44-50 7500 75 Fax: +45 44-50 75 75 E-mail: info.dk@burkert.com E-mail: info.dk@burkert.com E-mail: info.dk@burkert.com

Sweden Sweden Sweden AB AB Brkert-Contromatic Brkert-Contromatic

Western Australia Western Australia Western Australia BURKERT CONTROMATIC AUSTRALIA BURKERT CONTROMATIC AUSTRALIA
BURKERT CONTROMATIC AUSTRALIA PTY. LIMITED PTY. LIMITED LIMITED Unit 8,PTY. 1st Floor, Reid Unit 8, 1st 85 Floor, 85Promenade Reid Promenade Unit 8, 1st6027 Floor, 85 Reid Promenade Joondalup WA Joondalup WA 6027 Joondalup WA 6027 Tel: 1300 888 868 Tel: 1300 888 868 Tel: 888 Fax: 1300 888 076 Fax:1300 1300 888868 076 Fax: 1300 888 076

Estonia Estonia Estonia Brkert Oy Eesti Brkert Oy Eesti

Brkert-Contromatic Kattsundsgatan 27 27 AB Kattsundsgatan Kattsundsgatan 27 SE-211 26 Malm SE-211 26 Malm SE-211 26 Malm Tel: +46 51 0051 00 Tel:(0)40-664 +46 (0)40-664 Tel: 51 Fax: +46 (0)40-664 51 01 Fax:+46 +46(0)40-664 (0)40-664 5100 01 Fax: +46 (0)40-664 51 01 E-mail: info.se@burkert.com E-mail: info.se@burkert.com E-mail: info.se@burkert.com

Burkert Contromatic Limited Unit K, 9/Floor, Kwai Shun Industrial Centre Unit K, 9/Floor, Kwai (China/HK) Shun Industrial Centre Unit K, 9/Floor, Kwai Shun Industrial Centre No. 51-63 Container Port Road No. 51-63 Container Port Road No. 51-63 Container Port Road Kwai Chung, N.T., HONG KONG Kwai Chung, N.T., HONG KONG Kwai Chung, N.T.,1202 HONG KONG Tel: +852 2480 1202 Tel: +852 2480 Tel: +852 2480 1202 Fax: +852 2418 1945 Fax: +852 2418 1945 Fax: +852 2418 1945 E-mail: info.hkg@burkert.com E-mail: info.hkg@burkert.com E-mail: info.hkg@burkert.com

Taiwan Taiwan Taiwan Burkert Contromatic Taiwan Ltd. Ltd. Burkert Contromatic Taiwan

Brkert Laki 11 E 11 Oy Laki E Eesti Laki 11 E Tallinn EE-12915 Tallinn EE-12915 EE-12915 Tallinn Tel: +372 6440 6440 698 Tel: +372 698 Tel: 6440 Fax: +372 6313 759 698 Fax:+372 +372 6313 759 Fax: +372 6313 759 E-mail: info@burkert.ee E-mail: info@burkert.ee E-mail: info@burkert.ee

Switzerland Switzerland Switzerland Brkert-Contromatic AG Schweiz Brkert-Contromatic AG Schweiz


Brkert-Contromatic AG Schweiz Bsch 71 71 Bsch Bsch 71 Hnenberg CH-6331 Hnenberg ZG ZG CH-6331 CH-6331 Hnenberg ZG Tel: +41 66 6666 Tel:(0)41-785 +41 (0)41-785 66 Tel: 66 Fax: +41 (0)41-785 66 33 Fax:+41 +41(0)41-785 (0)41-785 6666 33 Fax: +41 (0)41-785 66 33 E-mail: info.ch@buerkert.com E-mail: info.ch@buerkert.com E-mail: info.ch@buerkert.com

South Australia South Australia South Australia BURKERT CONTROMATIC AUSTRALIA BURKERT CONTROMATIC AUSTRALIA
BURKERT CONTROMATIC AUSTRALIA PTY. LIMITED PTY. LIMITED PTY. LIMITED Innovation House, First Avenue Innovation House, First Avenue Innovation House, First Avenue Mawson LakesLakes SA 5095 Mawson SA 5095 Mawson Lakes SA Tel: 1300 888 868 Tel: 1300 888 868 5095 Tel: 888 Fax: 1300 888 076 Fax:1300 1300 888868 076 Fax: 1300 888 076

India India India Burkert Contromatic PVT Ltd Burkert Contromatic PVT Ltd

Burkert Contromatic Ltd Apex Towers, 1st Floor, No.PVT 54 II Main Apex Towers, 1st Floor, No. 54 II Rd Main Rd Apex Towers, 1st Floor, No. 54 II Main Rd RA Puram RA Puram RA Puram Chennai 600 028, INDIA Chennai 600 028, INDIA Chennai 028, INDIA Tel: +91 (0)44-4230 3456 Tel: +91 600 (0)44-4230 3456 Tel: +91 3456 Fax: +91 (0)44-4230 3232 Fax: +91(0)44-4230 (0)44-4230 3232 Fax: +91 (0)44-4230 3232 E-mail: sales.in@burkert.com E-mail: sales.in@burkert.com E-mail: sales.in@burkert.com

Burkert Contromatic Taiwan Ltd. 9 F, No. 32, Chenggong Road, Sec. 1, 9 F, No. 32, Chenggong Road, Sec. 1, 9 F, District No. 32, Chenggong Road, Sec. 1, Nangang Nangang District Nangang District TaipeiTaipei Taipei TAIWAN 115, R.O.C. TAIWAN 115, R.O.C. TAIWAN 115, R.O.C. Tel: +886 (0)2-2653 7868 7868 Tel: +886 (0)2-2653 Tel: +886 7868 Fax: +886 (0)2-2653 7968 Fax: +886(0)2-2653 (0)2-2653 7968 Fax: +886 (0)2-2653 7968 E-mail: info.rc@burkert.com E-mail: info.rc@burkert.com E-mail: info.rc@burkert.com

For up-to-date addresses please visit us at us www.burkert.com . For up-to-date addresses please visit at www.burkert.com . For up-to-date addresses please visit us at www.burkert.com.

Credits: and concept: Christian Brkert GmbH & Co. KG | Realization: WOLF, Berlin | Photography: Mnch Lichtbildnerei, Stuttgart; Studio Flamisch, Dsseldorf | 3D-Drawings: 3D Sales Technologies GmbH. All people shown are employees at Brkert. Thank you for your support (and spirit).

Hannover Hannover Hannover Brkert GmbH Co. KG Brkert GmbH & Co. & KG

Brkert GmbH & Co. KG Rendsburger Strae Rendsburger Strae 18 18 Rendsburger Strae 18 DE-30659 Hannover DE-30659 Hannover DE-30659 Hannover Tel: +49 (0)511/90276-0 Tel: +49 (0)511/90276-0 Tel: +49 Fax: +49(0)511/90276-0 (0)511/90276-66 Fax: +49 (0)511/90276-66 Fax: +49 (0)511/90276-66

Brkert-Contromatic Brasil Ltda. Rua Amrico Brasiliense, Rua Amrico Brasiliense, 2069 2069 Rua Amrico Brasiliense, Chacara Antnio 2069 Chacara SantoSanto Antnio Chacara Santo Antnio 04715-005 So Paulo - SP BRAZIL 04715-005 So Paulo - SP BRAZIL 04715-005 So Paulo - SP BRAZIL Tel:(0)11-2186 +55 (0)11-2186 Tel: +55 1155 1155 Tel: +55 (0)11-2186 1155 Fax:(0)11-2186 +55 (0)11-2186 Fax: +55 1165 1165 Fax: +55 (0)11-2186 1165 E-mail: pedidos.brasil@burkert.com E-mail: pedidos.brasil@burkert.com E-mail: pedidos.brasil@burkert.com

BURKERT CONTROMATIC SAS Rue du Giessen Rue du Giessen Rue du Giessen FR-67220 Triembach FR-67220 Triembach au Valau Val FR-67220 Triembach au Val Tel:(0)388-58 +33 (0)388-58 Tel: +33 91 1191 11 Tel: +33 (0)388-58 91 11 Fax:(0)388-57 +33 (0)388-57 Fax: +33 20 0820 08 Fax: +33 (0)388-57 20 08 E-mail: burkert.france@burkert.com E-mail: burkert.france@burkert.com E-mail: burkert.france@burkert.com

United Kingdom United Kingdom United Kingdom Burkert Contromatic Limited Burkert Contromatic Limited

Burkert Ltd. asakusa-building moto ImasuImasu moto asakusa-building Imasu moto asakusa-building 4-9-14 Moto Asakusa, Taito-ku 4-9-14 Moto Asakusa, Taito-ku 4-9-14 Moto Asakusa, Taito-ku 111-0041, JAPAN TokyoTokyo 111-0041, JAPAN Tokyo 111-0041, JAPAN Tel:(0)3-5827-0066 +81 (0)3-5827-0066 Tel: +81 Tel: Fax:+81 +81(0)3-5827-0066 (0)3-5827-0067 Fax: +81 (0)3-5827-0067 Fax: +81 (0)3-5827-0067 E-mail: info.jpn@burkert.com E-mail: info.jpn@burkert.com E-mail: info.jpn@burkert.com

Canada Canada Canada Brkert Contromatic Brkert Contromatic Inc. Inc.

ItalyItaly Italy Brkert Contromatic Italiana Brkert Contromatic Italiana S.p.A. S.p.A.
Brkert Contromatic Italiana S.p.A. Centro Direzionale Colombirolo Centro Direzionale Colombirolo Centro Direzionale Colombirolo Via Roma, Via Roma, 74 74 Via Roma, Cassina 74 IT-20060 De Pecchi IT-20060 Cassina De Pecchi (Mi) (Mi) IT-20060 Cassina De Pecchi (Mi) Tel:02-959 +39 02-959 Tel: +39 071 071 Tel: +39 02-959 071 Fax:02-959 +39 02-959 07 251 Fax: +39 07 251 Fax: +39 02-959 07 251 E-mail: info@buerkert.it E-mail: info@buerkert.it E-mail: info@buerkert.it

Burkert Contromatic Limited Brimscombe Port Business Brimscombe Port Business Park Park Brimscombe Port Business Park Brimscombe, Stroud Brimscombe, Stroud Brimscombe, Stroud Glos,2QQ GL5 / 2QQ / UNITED KINGDOM Glos, GL5 UNITED KINGDOM Glos, GL5 2QQ / UNITED KINGDOM Tel:(0)1453-731 +44 (0)1453-731 Tel: +44 353 353 Tel: +44 (0)1453-731 353 Fax:(0)1453-731 +44 (0)1453-731 Fax: +44 343 343 Fax: +44 (0)1453-731 343 E-mail: sales.uk@burkert.com E-mail: sales.uk@burkert.com E-mail: sales.uk@burkert.com

Beijing Burkert Contromatic (Shanghai), Co., Ltd. Burkert Contromatic (Shanghai), Co., Ltd. Burkert (Shanghai), Co., Ltd. A Contromatic 1708, Luowa Building, No.203 RoomRoom A 1708, Luowa Building, No.203 Room A 1708, Luowa Wangjing, Building, No.203 Er Qu Lizezhongyuan, Er Qu Lizezhongyuan, Wangjing, Er Qu Lizezhongyuan, Wangjing, Chaoyang District Chaoyang District Chaoyang Beijing P.R.District China, 100102 Beijing P.R. China, 100102 Beijing P.R. China, 100102 Tel:10 +86 10 6439 Tel: +86 6439 9783,9783, 6439 6439 9793 9793 Tel: 10 9783, 6439 9793 Fax:+86 +86 106439 6439 Fax: +86 10 6439 9612 9612 Fax: +86 10 6439 9612

Beijing Beijing

Korea Korea Korea Burkert Contromatic Co., Ltd. Burkert Contromatic KoreaKorea Co., Ltd.
Burkert Contromatic Bldg. Korea Co., Ltd. C-401, 554-2 C-401, Micro Micro OfficeOffice Bldg. 554-2 C-401, Micro Keumcheon-Gu Office Bldg. 554-2 Gasan-Dong, Gasan-Dong, Keumcheon-Gu Gasan-Dong, Keumcheon-Gu 153-803, KOREA Seoul Seoul 153-803, KOREA Seoul 153-803, KOREA Tel:(0)2-3462 +82 (0)2-3462 Tel: +82 5592 5592 Tel: +82 (0)2-3462 5592 Fax:(0)2-3462 +82 (0)2-3462 Fax: +82 5594 5594 Fax: +82 (0)2-3462 5594 E-mail: info.kor@burkert.com E-mail: info.kor@burkert.com E-mail: info.kor@burkert.com

Osaka Burkert Burkert Ltd. Ltd. Burkert Ltd. Higashi Nakajima, 2-8-8-1103 2-8-8-1103 Higashi Nakajima, 2-8-8-1103 Higashi Nakajima, Higashi-Yodogawa-ku Higashi-Yodogawa-ku Higashi-Yodogawa-ku Osaka 533-0033, JAPAN Osaka 533-0033, JAPAN Osaka 533-0033, JAPAN Tel: +81 (0)6-6320-0880 Tel: +81 (0)6-6320-0880 Tel: +81 (0)6-6320-0880 Fax:(0)6-6320-0881 +81 (0)6-6320-0881 Fax: +81 Fax: +81 (0)6-6320-0881

Osaka Osaka

You might also like