You are on page 1of 2

Machine tool accelerometers

CMSS MT-1
Machine tool industry accelerometer, low profile
The CMSS MT-1 accelerometer is optimized for use with on-line monitoring systems in machine tool applications: Machine tool drives Machine tool gearboxes Machine tool carriages The small size accelerometer is a low profile, bolt mounted sensor used for ease of location in inaccessible and guarded locations. To exclude noise from electrical transients, it uses a double-shielded integral cable.

Features
For use with the SKF on-line system DMx, IMx and TMU Meets CE, EMC requirements High resistance to electrical noise Low profile, side exit, industrial accelerometer with captive bolt (M8 1,25, 33 mm (1.3 in.) length) provided Compact design ideal for mounting with limited space Corrosion resistant and hermetically sealed

Dimensions 8,5 mm (0.34 in.) 17,0 mm (0.67 in.)

36,0 mm (1.42 in.) 21,5 mm (0.84 in.)

Cable length, based on model number (see Ordering information) Double shielded, twisted pair

8,5 mm (0.34 in.)

Outside diameter of cable, approximately 3,6 mm (0.14 in.)

27,0 mm (1.06 in.)

19,0 mm (0.75 in.)

CMSSMT1
S/N 99999

Drain (open) White (sensor signal and power) Black (sensor return) Screen (external shield connected to case)

0,8 mm (0.03 in.) 12,3 mm (0.48 in.) M8 1,25 socket cap head screw, 33 mm (1.3 in.) length

90

Typical frequency response Deviation, dB


3 2 1 0 1 2 3 0.3 1 10 100 1k 10 k

Physical Dimensions: See drawing Weight: Shipping weight, see table under "Ordering information" Case material: 304 stainless steel Mounting: M8 1,25 (33 mm (1.3 in.) length) captive mounting bolt provided Mounting torque: 4,5 Nm (40 in. lbs.) Cable
Frequency, Hz

Specifications
Dynamic Sensitivity: 100 mV/g Sensitivity precision: 10% at 25 C (75 F) Acceleration range: 50 g peak Amplitude linearity: 1% of full scale Frequency range: 3 dB: 0,32 to 10 000 Hz Resonance frequency, mounted, nominal: 10 kHz Transverse sensitivity: 5% of axial Electrical Power requirements: Voltage source: 18 to 28 V DC Constant current diode: 2 to 10 mA, recommended 4 mA Electrical noise: < 100 V from 2,5 Hz to 25 kHz Output impedance: < 100 Bias output voltage: 8 to 12 V DC Grounding: Case connected to outer shield, inner shield open Environmental Temperature range: Operating: 40 to +85 C (40 to +185 F) Storage: 55 to +120 C (65 to +250 F) Shock limit: 7 000 g peak Sealing: Encapsulated CE: According to the generic immunity standard for Industrial Environment EN 50082-2, Heavy Industrial Acceptance criteria: The generated false equivalent g level under the above test conditions should be less than 2 mg measured peak to peak

Wires: 20 AWG Tin-plated Copper Stranded 19 0,20 Overall diameter: 0,96 to 1,30 mm (0.04 to 0.05 in.) Termination: Signal/Power: White wire Common: Black wire Inner shield: Drain wire Outer shield: Braid Jacket: Fluorinated polyimide (FPI) 155 Final diameter: 3,9 mm, 0,20 mm (0.15 in., 0.01 in.) Color: Transparent Rating: 600 V Temperature: 65 to +150 C (85 to +300 F) Cond. resist (maximum): 32,4 /km Insulation resist: > 1 500 M km Test voltage: 3 kV DC Weight (approximate): 30 kg/km (106 lb./mile) Minimum bend radius (MBR): Installation: 35 mm (1.38 in.) Dynamic use: 70 mm (2.76 in.)

Ordering information CMSS MT-1 Machine tool industry accelerometer, low profile. Part number CMSS MT1-16 CMSS MT1-32 CMSS MT1-64 Cable length 4,88 m (16 ft.) 9,75 m (32 ft.) 19,51 m (64 ft.) Weight 256 g (9 oz.) 482 g (17 oz.) 964 g (34 oz.)

91

You might also like