Professional Documents
Culture Documents
Time: 3 Hours
1.
Conduct a suitable experiment for a uni-directional current controlled device 100 and draw the steady state characteristics.
2.
Conduct a suitable experiment for a bi-directional current controlled device 100 and draw the steady state characteristics.
3.
Conduct a suitable experiment for turn-on characteristics of a uni-directional 100 current controlled device.
4.
Conduct a suitable experiment for a uni-directional voltage controlled device 100 and draw the steady state characteristics.
5.
Conduct a suitable experiment for turn-on characteristics of a uni-directional 100 voltage controlled device.
6.
Conduct a suitable experiment to show the advantages of both BJT and 100 MOSFET of a device and draw the steady state characteristics
7.
Conduct a suitable experiment to prove that the o/p DC voltage is greater than 100 i/p DC voltage of a device.
8.
Conduct a suitable experiment to prove that the o/p DC voltage is lesser than 100 i/p DC voltage of a device.
9.
Conduct a suitable experiment using series resonant DC-DC converter of a 100 device.
10. Conduct a suitable experiment using parallel resonant DC-DC converter of a 100 device.
11. Conduct a suitable experiment for a single phase PWM inverter. (both 100 Multiple and Sine PWM method)
12. Conduct a suitable experiment for a three phase PWM inverter. (by using Sine 100 PWM method)
13. Conduct a suitable experiment for a two pulse converter using 2 SCRS and 2 100 Diodes.
14. Conduct a suitable experiment for a two pulse converter using 4 SCRS.
100
15. Obtain the output voltage waveform of a single phase converter which has four controllable devices. Take =300 for R load, = 600 for RL Load.
100
16. Obtain the output voltage waveform of a single phase converter which has two controllable devices. Take = 650 for R Load, =900 for RL load. operational amplifier and also draw the necessary waveforms.
100
17. Obtain the V-I static characteristics of a three junction, four layer and unidirectional current controlled device.
100
18. Obtain the V-I static characteristics of a three terminal bidirectional current controlled device
100
19. Obtain the transfer and output characteristics of an unipolar voltage controlled 100 device.
20. Obtain the transfer and output characteristics of an unipolar voltage controlled 100 device.
21. Draw the output waveforms of a buck- boost converter by conducting suitable experiment.
100
22. Control the output voltage of a three phase Inverter using PWM technique and draw the waveforms.
100
23. Control the output voltage of a single phase Inverter using PWM technique and draw the waveforms.
100
24. Obtain the output voltage of resonant converterand draw the waveforms.
100