You are on page 1of 4

MODELS 898, 899

Dual-In-Line Thick Film Resistor Networks

ELECTRICAL

Standard Resistance Range, Ohms * Standard Resistance Tolerance, at 25C Operating Temperature Range Temperature Coefcient of Resistance Temperature Coefcient of Resistance Tracking Maximum Operating Voltage Insulation Resistance
ENVIRONMENTAL (PER MIL-R-83401)

10 to 10Meg 2% (<33 Ohms = 2 Ohms) Optional: 1% (F Tol.) -55C to +125C 100ppm/C (<100 Ohms = 250ppm/C) 50ppm/C 100Vdc or PR 10,000 Megohms

Thermal Shock plus Power Conditioning Short Time Overload Terminal Strength Moisture Resistance Mechanical Shock Vibration Low Temperature Storage High Temperature Exposure Load Life, 1,000 Hours Resistance to Solder Heat (Per MIL-STD-202, Method 210, Cond.B) Dielectric Withstanding Voltage Temperature Exposure, Maximum Marking Permanency Lead Solderability Flammability Storage Temperature Range
* Plus 0 Ohm jumper Specications subject to change without notice.

R 0.70% R 0.50% R 0.25% R 0.50% R 0.25% R 0.25% R 0.25% R 0.50% R 1.00% R 0.25% 200V rms for 1 minute 215C for 3 minutes MIL-STD-202, Method 215 MIL-STD-202, Method 208 UL-94V-O Rated -55C to +125C

4-161

Models 898, 899

MECHANICAL

Lead Material Substrate Material Resistor Material


APPLICABLE DOCUMENTS

Copper Alloy, 60/40 Tin-Lead (Plating) Alumina Cermet

MIL-R-83401 Resistor Networks, Fixed, Film, General Specications MIL-STD-105 Sampling Procedures and Tables for Inspection by Attributes MIL-STD-202 Test Methods for Electronic and Electrical Component Parts
STANDARD RESISTANCE VALUES, OHMS POWER DISSIPATION, WATTS AT 70C

-3 Circuit (Isolated Resistors) & -1 Circuits (Bussed Resistors) 22 27 33 39 47 51 56 68 82 100 120 150 180 200 220 270 330 390 470 510 560 680 820 1K 1.2K 1.5K 1.8K 2K 2.2K 2.7K 3.3K 3.9K 4.7K 5.1K 5.6K 6.8K 8.2K 10K 12K 15K 18K 20K 22K 27K 33K 39K 47K 51K 56K 68K 82K 100K 120K 150K 180K 200K 220K 270K 330K 390K 470K 510K 560K 680K 820K 1Meg

Model 898 899

Resistor (Per Circuit) Package -1 -3 -5 2.0 .125 .250 .125 1.8 .125 .250 .125

-5 Circuit (Dual Terminators) R1/R2 180/390 220/270 R1/R2 220/330 330/390 R1/R2 330/470 330/680 R1/R2 3K/6.2K

4-162

Models 898, 899

OUTLINE DIMENSIONS (Inch/mm) .880 Max. 22.4 .780 Max. 19.8

Model 898 Model 899

Notes: Unless otherwise specified, .005 tolerances are 0.13 .340 .020 Max. 8.64 0.51

.250 Ref. 6.35

.125 Max. 3.18

.050 Ref. 1.27

.060 Ref. 1.52

.020 Min. 0.51 .080 .020 2.03 0.51 .100 .010* 2.54 0.25 .018 .003 0.46 0.08 .600 .010 15.2 0.25 .700 .010 17.8 0.25 .135 .030 3.43 0.76

.185 Max. 4.70

4
*Typical spacing non-accumulating lead thickness: .010 .002 0.25 0.05

SCHEMATICS

-3 Circuit - Isolated Resistors N

-1 Circuit - Bussed Resistors N

-5 Circuit - Dual Terminator N


R1 R2

N/2

N/2

N/2

-42 Circuit - 5.2V (VEE) Pull-Down VCC VEE 16 R c 1 VCC VEE Custom Model: 898-42-R (R) R=510 Note: Model 899: N = 114 Leads, Model 898: N = 16 Leads. Custom circuits are available. Consult Factory. R R R R R R R R R R R

16

-45 Circuit - TTL to ECL Translator VCC TTL Inputs


R1 R2 R3 180 270 820

1 VCC Outputs To ECL VEE Custom Model: 898-45 R1=180 R2=270 R3=820

4-163

Models 898, 899

TYPICAL PART MARKING

898-3-R10K Lead #1 Indicator Package Code # Of Leads 899 = 14 Leads 898 = 16 Leads

Date Code Optional Locations

Resistance Value Circuit Type: (1 Bussed) (3 Isolated) (5 Dual Terminator)

PACKAGING

Standard: Magazines All Units oriented with lead #1 to the same side. Magazine: Material Capacity = = Antistatic Plastic 25 Units

ORDERING INFORMATION

89 9 -5- R220 / R330 F Model Series Number of Leads: 9 = 14 Leads 8 = 16 Leads Circuit Type: 3 = Isolated 1 = Bussed 5 = Dual Terminator Resistance Value Tolerance Code: F = 1% (No code used for standard tolerances.) R2 Resistance Value: (Add for -5 circuit only)

4-164

Models 898, 899

You might also like