You are on page 1of 43

The AIM Magazines Editorial Team 49:

Sally Watson (Editor) spwatson@ntlworld.com Bea Broadwood (founder) office@petite-properties.com Janet Smith (Small Scales) desertminis@gmail.com Janet Harmsworth (Features) janet@minimannequins.co.uk Julia Jeffreys jajeffreys1@gmail.com
(

Dear Reader
.

Welcome to the AIM January Projects special issue. This contains all the projects from our 12 Makes for Christmas publication as well as some new items. If you live in the cold climate of the northern hemisphere snuggle up with your miniatures tool kit and get making for the future; if you are basking in southern hemisphere sunshine take your kit out on the deck and get going. I am grateful to all the AIM members who found the time to contribute to this special issue and, of course, to Bea and Tony Broadwood for their technical expertise in uploading every issue. Next issue will be our 50th a very significant number. If you have suggestions for topics of future issues please get in touch. You will find my contact details in the sidebar. Wishing you all a happy and successful 2014.

Kathi Mendenhall sewminipatterns@att.net Malcolm Smith malcolm@malcolmsminiatures.co.uk Marianne Cook marianne.cook1@btinternet.com Pauline Coombes coombes.pauline@yahoo.com Mo Tipton info@themousemarket.com

Please note AIM is an active association to which all members contribute.

Sally

AIM imag Issue 49 2014

Contents

2014 printable calendar by Jean Day Christmas stocking by Gail St Clair Arran knitting by Frances Powell Colouring book by Carol Lester Angel by Sandra Stacy Tree skirt by Gail St Clair Marotte by Sandra Norris Baby blanket by Helena Bleeker Itty Bitty doll by Shelly Norris Poinsettia by Pauline Coombes Socks and stockings by Sandra Stacy Wicker chair by Kathy Brindle Christmas wrapping printies by Jean Day Seasonal wreaths by Marianne Cook Chimney breast by Bea Broadwood Valentine printable images by Jean Day

4 5 6 9 10 12 13 20 22 24 26 28 30 32 37 41

Cover designed by Marianne Cook Image by Jane Harrop www.janeharrop.co.uk/weekend-workshop.html

AIM imag Issue 49 2014

AIM imag Issue 49 2014

AIM imag Issue 49 2014

AIM imag Issue 49 2014

AIM imag Issue 49 2014

AIM imag Issue 49 2014

AIM imag Issue 49 2014

AIM imag Issue 49 2014

10

AIM imag Issue 49 2014

11

AIM imag Issue 49 2014

12

AIM imag Issue 49 2014

13

AIM imag Issue 49 2014

14

AIM imag Issue 49 2014

15

AIM imag Issue 49 2014

16

AIM imag Issue 49 2014

17

AIM imag Issue 49 2014

18

AIM imag Issue 49 2014

19

AIM imag Issue 49 2014

20

AIM imag Issue 49 2014

21

AIM imag Issue 49 2014

22

AIM imag Issue 49 2014

23

AIM imag Issue 49 2014

24

AIM imag Issue 49 2014

25

AIM imag Issue 49 2014

26

AIM imag Issue 49 2014

27

AIM imag Issue 49 2014

28

AIM imag Issue 49 2014

29

AIM imag Issue 49 2014

30

AIM imag Issue 49 2014

31

AIM imag Issue 49 2014

32

AIM imag Issue 49 2014

33

AIM imag Issue 49 2014

34

AIM imag Issue 49 2014

35

AIM imag Issue 49 2014

36

Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...

1:24th Scale Project...

By AIM Member, Bea Broadwood


Materials inch thick polystyrene o cut Mount board (1.2mm thick) Air dry clay or paper clay Matt emulsion paint tester pots in terracotta, light stone & medium brown Black & white poster paint Grain of wheat light Balsa wood off cut for mantle beam PVA & tacky glue

Step 1 Draw out the fireplace front; part A and back; part B (see fig. A) onto 1.2mm thick mount board. Cut out using a craft knife and metal ruler. Step 2 Draw around part A onto a piece of inch thick polystyrene, and again cut out the polystyrene shape; part C using a craft knife and metal ruler. Step 3... Cut away an additional inch at the top of the fireplace aperture of part C to allow space in which to later conceal the internal fireplace light. (See fig. B)

Fig. A

2in

2in FRONT The internal height of your room setting.

Fig. B

BACK

C
POLYSTYRENE off cut: (Same size as Part A)

1in in

1in

CUT AWAY
2in

in

2in in

AIM imag Issue 49 2014 37


Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...

Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...

Step 4... Using PVA adhesive, glue the front; part A onto the front on the polystyrene chimney breast; part C. Then glue on the back; part B, see picture 1. Ensure all three pieces line up. Weigh down and compress with heavy books / weight if necessary. Leave to dry thoroughly. Step 5... Roll out a rectangular piece of air dry clay that is approximately the same size as the rear internal back wall of the fireplace and about inch thick, see picture 2. Working quickly, liberally coat the rear internal wall with PVA adhesive, again see picture 2. Lay the rectangle of clay onto the rear wall within the fireplace aperture and press the clay into place. Next, take an off cut of a stiff plastic margarine lid (or similar) and press the plastic strip into the clay at approximately inch intervals - to form the horizontal mortar courses of the bricks, see picture 3. Alternatively if you have a steady hand, use a fine scribe tool and imprint the horizontal lines onto the surface of the clay by hand. Next take a pair of inexpensive tweezers and pull the two blades apart so that they no longer touch. Widen the tweezers ends so that they stay approximately inch apart. Press the ends gently into the clay to form the vertical ends of the bricks, see picture 8. Step 6... Next paint the exterior of the fireplace (both mount board, polystyrenes external and internal sides) with PVA adhesive. Roll out a piece of air dry clay, that is approximately inch thick and larger than the chimney breast. In the same way that you would cover the top of a pie with pastry, lay the clay over the front of the chimney breast, see picture 4. Smooth the clay over the chimney breast, pressing it gently onto the front and sides, in turn covering over the fireplace aperture. Press and smooth the clay to follow the contours of the chimney breast. AIM imag Issue 49 2014 38
Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...

.1.

.2.

.3.

.4.

.5.

.6a.

.6b.

.7a

.7b

Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...

Step 7... Next (again similar to when making when making a pie) trim the excess clay away from the top, bottom and back edges of the chimney breast using a sharp knife. Then using scissors, cut the clay vertically in the centre of the fireplace aperture, see picture 5. Then with a sharp knife cut along the top of the fireplace aperture to allow the two sides to be folded back to cover the internal side walls of the fireplace and press gently into place, see pictures 6a and 6b. Step 8... Using the edge of a knife carefully imprint the clay with horizontal lines onto all elevations of the chimney breast, evenly spaced approximately inch apart, see pictures 7a and 7b, then again use the tweezers to imprint the vertical ends of the bricks. See picture 8. Leave the chimney breast overnight to dry out and completely hardened, as per the air dry clay manufacturers instructions. Do not put the chimney breast near to a heat source, as this will dry it out too quickly and may cause cracking and warping to occur. Step 9 Once the chimney breast has completely dried and hardened, sand edges and ends flat. Gently sand all of the brick elevations, then using a scribe tool or similar sharp ended tool, gently scrape along the horizontal lines to help define the brick shapes and to remove any small pieces of excess clay. See picture 9. Step 10 To create the hearth, take an off cut of 1.2mm thick mount board. Place the fireplace on top of the mount board and draw around the inside aperture of the fireplace, see picture 10. Cut the hearth shape out and check that it fits snugly inside the fireplace aperture. Step 11 Sponge paint the hearth with medium grey paint - made by mixing white and black poster paint together to create the desired shade. When dry, darken the grey paint by adding a little more black paint and lightly sponge the hearth again - this time only allowing the darker grey paint to slightly cover the hearth, creating a stone effect. See picture 11. Step 12 Paint the chimney breast all over with light stone paint, ensuring that the paint is worked into all of the groves between the bricks. Leave to dry completely before continuing. Step 13 Using a firm sponge and a little terracotta coloured paint, gently sponge paint the brick elevations, ensuring that the paint does not go into the grooves between the bricks. Paint all the bricks in this way and allow to dry, see picture 12. AIM imag Issue 49 2014 39

.8.

.9.

.10. .11.

.12.

Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...

Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...

Step 14 Using either a small paint brush or a cotton bud paint random bricks with a little black poster paint. Repeat this process with a little white poster paint, see picture 13. Leave to dry. Step 15 Next mix a small amount of black poster paint into the original terracotta colour emulsion in order to darken it and repeat the sponge painting process, but this time only allow the darkened paint to slightly cover the bricks so that not only the original colour of the bricks shows through, but also the random black and white bricks too. See picture 14. Again leave to dry thoroughly. Step 16.. Take an off cut of balsa wood and using a craft knife, round off the edges. Add notches and cuts to age the woods appearance, see picture 15a. Paint with diluted brown paint and distress with a little black poster paint if required, see picture 15b. Stick the mantle beam onto the fireplace, see picture 15c. Step 17... Using a sharp ended tool, carefully make a hole through the back of the chimney breast, at the top of the fireplace aperture. Ensure that the hole is large enough to thread a small grain of wheat bulb easily through and that it is in a position that both the hole, bulb and wires will be hidden from sight. Thread the bulb of a grain of wheat light through the hole previously made in part B, see picture 19. Stick the completed fireplace permanently into position in your room setting, then stick the inset hearth into place. Thread the wire of the light through the hole and electrify as per the bulb manufacturers instructions.

.13.

.14.

.15a.

.15b.

.15c.

.16.

Step back and admire your work! This 1:24th project was taken from Beas book: A Country Sitting Room www.petite-properties.com

(Formatted by Bea Broadwood)

Text & Images Lumo Publishing / Petite Properties Ltd


Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...Project...

AIM imag Issue 49 2014

41

This issue would not have been possible without the generous contributions from the following AIM members Many thanks therefore go to...

Bea Broadwood Frances Powell Gail St. Claire Helena Bleeker Janet Granger Kathy Brindle Marianne Cook Petite Properties Sadie Brown Jean Day

Pauline Coombes Sandra Stacey Shelley Norris Carol Lester The Dolls House Mall

www.artisansinminiature.com
Please Note: The projects included in this publication are not suitable for children under the age of 14. The miniatures featured in this magazine are collectors items and therefore unsuitable for children under 14. All projects are undertaken at your own risk. AIM does not accept responsibility for any injury incurred. All articles and photographs used in this magazine are copyright of their authors. The AIM magazines content is for private use only and it must not be reproduced in part or in full for commercial gain in any form. Each artisan contributor is responsible for their own work / contribution to the AIM magazine and retains full responsibility for their published work.

AIM imag Issue 49 2014 AIM imag Issue 49 2014 42

44 The authors/self publishers cannot be held legally responsible for any consequences arising from following instructions, advice or information in this magazine.

Artisans In Miniature
of excellence in original handcrafted scale miniatures dedicated to promoting a high standard An association of professional artisans,

www.artisansinminiature.com
artisansinminiature.blogspot.com
The way in which AIM Association membership is offered has changed!
Due to an overwhelming uptake of membership over recent months, as from July 31st 2010 the AIM Association now has limited membership places available
The AIM Association was set up in 2007 in order to provide a global platform for professional miniature artisans who wish to actively promote their work and actively take part and support the opportunities and promotional facilities which AIM uniquely offers for free: notably including... The AIM online forum Monthly FREE AIM magazine AIM Member's online directory AIM website AIMs facebook & social networking pages The AIM blog.

AIM membership is only available for professional miniature artisans,

www.artisansinminiature.com
http://artisansinminiature.blogspot.com/ selling quality handmade miniatures to the public.
Membership is reserved for artisans who wish to showcase & promote their work, through active participation within the AIM Association. Please note; A waiting list has now been introduced regarding new membership applications.

AIM is completely FREE to join and completely FREE to be part of.


So if you are a professional miniature artisan and you would like to find out more about joining the AIM Association, please email AIMs Membership Secretary: Tony for more information:

tonybroadwood@aol.com Or alternatively visit our website www..artisansinminiature.com


AIM imag Issue 49 2014 43

You might also like