You are on page 1of 20

AUTOMATIC BENDINO FOR HIGH THICKESS PIPES

AUTOMATIC BENDING FOR PIPES AND POLES

SPECIAL MACHINES AND STANDARD PRODUCTION


SPECIAL BENDING PLANTS,
PRESS BRAKES AND SHEARS
- Tandem or combined bending plants up to 7.000 tons for
the production of poles /pipes
- 3 to 14 meters shears for thickness up to 30 mm
The introduction of numerical control systems enabled to
reach very high levels of accuracy and flexibility in use.
These features helped to acquire a highly varied clientele
over a period of 40 years, ranging from the small mechanical
workshop to the large industry, both in Italy and abroad.
Therefore our Company caters for medium/big size firms
seeking for high quality and productivity.
Over the last 10 years Somo has focused further on the
construction of automatic plants intended for the manufacture
of specific products.
Sale and installation of fully automatic plants designed to
produce special products and completely managed by
Since its establishment in 1960 our company has specialized control programmes. These have been designed, carried
in the production of sheet metal working machines, opting out and optimised by Somo in order to satisfy the most
for a solution considered as innovative at that time - for the different market needs.
Italian market at least - and introducing hydraulic fittings,
first on press brakes and subsequently on guillotine shears. The massive use of IT in automation and the development
As time passed SOMO improved its production, contrasting of the internet helped to make real-time action easier, no
standardization and setting as main objective the matter where the plant is located.
manufacture of “customised” machines based on the various Our after sales-service can offer on-line help via the internet 7
requirements of the user while preserving functionality in days a week through the most widespread software systems
structure and developing safety and reliability. used for remote connection – all you need is just an internet
The models proposed cover a wide range of solutions : connection.
- 70 to 300 tons press brakes All plant components are subject to accurate analysis for
- Customized press brakes, 300 to 6.000 tons easy detection of any failure.

Cornaredo - Via S.Siro / - Milano - Italy

1
Automatic Bending For High Thickess Pipes

SOMO has built a number of plants intended for


the production of high-thickness pipes made with stainless steel,
carbon steel and special alloys.
Based on an automation system designed and carried out by
Somo, the whole production process requires no action by the
operator, who has just a control function.
In spite of the considerable size of the machinery, the high qua-
lity level attained enables to perform highly accurate geometric
shapes, which make post-bending procedures easier and help to
optimize production.
Thanks to the experience and skills acquired in this field, huge au-
tomatic plants entirely designed, carried out and installed by Somo
staff have been built in various parts of the world; they consist of
specific machinery for any step of the production process, such
as pre-bending, bending, closing and approaching of pipe edges,
always based on the principle of production process automation.
Full automatic bending plant Total
Working Power 6.000 tons Total
Bending Lenght 12 m. gap 900 mm

Full automatic bending plant


working Power 1.250 tons
Lenght 7,1 m. gap 700 mm

Portal Press Working Power


6.000 tons Bending Length 15 m.

4
Automatic Bending for Pipes and Poles

Automatic Press Brake


working Power 2.500 tons
Length 7 meters gap 700 mm

Full automatic bending plant


Total Working Power 6.750 tons,
Total Bending Lenght 12 m.
gap 1350 mm

Full automatic bending plant


Total Working Power 6.750 tons,
Total Bending Lenght 12 m.
gap 1350 mm

5
automatic bending plant
Total Working Power 3000 tons
Total Bending Lenght 15 m gap 1800

a
automatic Pre Bending Unit Power
1.250 ton Total Lenght 7 m.

automatic Pre Bending Unit Power


1.250 ton Total Lenght 14 m

6
Automatic Bending For Pipes And Poles

Since the 90ies SOMO has gathered experience in the design and
building of plants intended for specific customer’s needs.
Based on the principle of turnkey supply, SOMO was distinguished
by the manufacture of various plants intended for the production of :
• Round-section lighting poles
• Polygonal-section lighting poles
• Special pipes
SOMO covers all supply steps, from analysis of the lay-out needed
and available for the manufacturing of the product required to plant
start-up at the end customer’s site.
Full automatic bending plant for conical
poles Total Working Power 1.400 tons
Total Bending Lenght 14 m gap 1200 mm m

automatic bending plant for conical


poles Total Working Power 1.400 tons
Total Bending Lenght 14 m.
gap 800 mm

Full automatic bending plant for


polygonal poles with loading pick up.
Total Working Power 1.600 tons Total
Bending Lenght 16 m gap 1200

8
Automatic Bending for Pipes and Poles

Full automatic bending plant for


polygonal poles Total Working
Power 700 tons Total Bending
Lenght 14 m. gap 1200

Full
F automatic bending plant for conical
Fu
poles with loading pick up
Total Working Power 1.600 tons
Tot Bending Lenght 16 m. gap 800

Full automatic bending plant for conical


poles with loading pick up Total Working
g
Power 1.600 tons Tot Bending Lenght
16 m. gap 800

9
Full automatic bending plant for
polygonal and conical poles Total
Working Power 1400 tons
Total Bending Lenght 14 m. gap 1200

Full automatic bending plant for conical


F
poles Total Working Power 700 tons
Total Bending Lenght 7 m. gap 500

Full automatic bending plant conical


poles with loading pick up Total Working
g
Power 1600 tons Total Bending Lenghtt
16 m. gap 800

10
SPECIAL MACHINES AND STANDARD PRODUCTION

11
Triplexx bending
bendin unit Totall W
Working
orking
Powerr 3500 tons Totalal Bending
Bending
Lenghtht 16 m. gap 1
1800
800 mm

straightening
sttraig
straaig
ight
hten
ht enin
en g press
ing
in p es
pr esss
Working
Work
Wo rkin
rk
kin g power
ing powe
po werr 1000
we 1000
100
10 tons
00 ton
ns

Press Brake P
Power 800 tons
Lenghtt = 8 m
m.

12
Special machines and Standard Production

Shear with 10 meters cutting


Length and 6 mm thickness

Press Brake Power 200 tons


Lenght = 4 m.

Press Brake Power 500 tons


Lenght = 6 m.

13
Tandem Presss Brake Pow
Power
wer
er 1200
Lenght
tons L enght = 13 m.

Tandem
Tand
Tandem P Press
rre
ess
s BBrake
ra
rak
ake
Power
Powe
Po 1.600
er = 1.60
1
1..60
600
0 to
tons
nss
Lenght
Le
eng
nght
h =1 12
2mm..

Brake
Presss B Power
rake P
Powe
Po werr 6
600 tons
00 tton
ons
Lenght
Leng
Le m..
nghtt = 8 m

14
TECHNICAL DATA

APPROXIMATE WEIGHT
MAIN MOTOR POWER
CUTTING LENGHT

CUTTING POWER
THROAT DEPTH

STROKE / min.
SERIES MODEL

CUTTING THICKNESS AND ANGLE


Angolo Angolo Angolo Angolo
mm 3° 2° 30’ 1° 30’ 30’ mm MIN MAX Kw da N Kg
201 6,5 5,7 4,4 2,5 19 44 11 13000 5.500
202 8,5 7,9 6,1 3,5 16 38 15 25000 8.300
203 10,5 9,4 7,2 4,2 17 39 18,5 35000 10.200
SCH
204 2050 13,5 12,3 9,5 5,5 500 13 31 22 60000 12.000
2000
205 16,5 15 11,6 6,7 11 25 30 90000 15.000
206 20,5 18,8 14,5 8,4 8 19 37 140000 19.000
207 23,5 21,5 16,5 9,5 7 16 45 180000 27.000
301 6,5 5,7 4,4 2,5 10 28 7,5 13000 8.500
302 8,5 7,9 6,1 3,5 12 33 15 25000 10.500
303 10,5 9,4 7,2 4,2 13 34 18,5 35000 15.500
SCH
304 3050 13,5 12,3 9,5 5,5 500 9 27 22 60000 14.500
3000
305 16,5 15 11,6 6,7 8 21 30 90000 17.000
306 20,5 18,8 14,5 8,4 6 17 37 140000 23.000
307 23,5 21,5 16,5 9,5 5 14 45 180000 32.000
401 6,5 5,7 4,4 2,5 10 29 7,5 13000 13.500
402 8,5 7,9 6,1 3,5 10 29 15 25000 14.500
403 10,5 9,4 7,2 4,2 10 30 18,5 35000 16.000
SCH 4050 500
404 13,5 12,3 9,5 5,5 7 24 22 60000 21.000
4000
405 16,5 15 11,6 6,7 6 19 30 90000 24.000
406 20,5 18,5 14,5 8,4 5 15 37 140000 35.000
407 23,5 21,5 16,5 9,5 4 12 45 180000 41.000
501 6 4,7 2,7 10 28 11 15000 17.000
502 8 6,1 3,5 9 27 15 25000 17.800
503 10 7,2 4,2 10 28 18,5 35000 19.800
SCH
504 5050 12 9,5 5,5 500 7 22 22 60000 24.000
5000
505 15 11,6 6,7 6 18 30 90000 29.000
506 18,5 14,5 8,4 5 14 37 140000 47.000
507 21,5 16,5 9,5 4 12 45 180000 55.000
602 7 6,1 3,5 10 30 15 20000 20.000
603 9 7,2 4,2 8 26 18,5 30000 22.500
604 11 9,5 5,5 6 20 18,8 45000 25.000
SCH
605 6050 13,5 11,6 6,7 500 5 18 22 70000 35.000
6000
606 17 14,5 8,4 4 13 30 110000 40.000
607 20 14,5 8,4 4 13 45 160000 65.000
608 23,5 18,2 10,5 3 9 55 222000 78.000

15
TECHNICAL DATA

DISTANCE BETWEEN UPRIGHTS

DISTANCE BETWEEN BAD-RAM


RAM SPEED

APPROXIMATE WEIGHT
MAIN MOTOR POWER
WORKING POWER

BENDING LENGTH

THROAT DEPTH
SERIES MODEL

DOWNSTROKE
RAM STROKE

UPSTROKE
WORK
KN mm mm mm mm mm mm/sec mm/sec mm/sec Kw Kg
SPS/N 100/31 3100 2600 130 9000
SPS/N
SPS/N 100/41 1000 4100 3100 400 250 440 100 10 130 7,5 10100
100
SPS/N 100/61 6100 5100 80 16800
SPS/N 130/31 3100 2600 10600
SPS/N
SPS/N 130/41 1300 4100 3100 400 250 440 100 10 120 11 11900
130
SPS/N 130/61 6100 5100 19900
SPS/N 160/31 3100 2600 11900
SPS/N SPS/N 160/41 4100 3100 13400
1600 400 250 440 100 10 120 15
160 SPS/N 160/51 5100 4100 16800
SPS/N 160/61 6100 5100 21900
SPS/N 200/31 3100 2600 120 14200
SPS/N SPS/N 200/41 4100 3100 120 15900
2000 400 300 490 100 10 18,5
200 SPS/N 200/61 6100 5100 120 24300
SPS/N 200/81 8100 7100 75 34400
SPS/N 250/31 3100 2600 100 17100
SPS/N SPS/N 250/41 4100 3100 100 19200
2500 400 300 490 100 8 18,5
250 SPS/N 250/61 6100 5100 100 29000
SPS/N 250/81 8100 7100 70 40800
SPS/N 300/31 3100 2600 110 18400
SPS/N SPS/N 300/41 4100 3100 110 20600
3000 400 300 490 100 8 22
300 SPS/N 300/61 6100 5100 110 31200
SPS/N 300/81 8100 7100 75 43600
SPS/N 400/41 4100 3600 32000
SPS/N
SPS/N 400/61 4000 6100 5600 500 400 570 115 10 105 37 44000
400
SPS/N 400/81 8100 7600 60000
SPS/N 500/41 4100 3600 38000
SPS/N
SPS/N 500/61 5000 6100 5600 500 400 570 100 8 95 37 49000
500
SPS/N 500/81 8100 7600 65000
SPS/N SPS/N 600/63 6300 5600 65000
6000 500 500 700 100 8 90 45
600 SPS/N 600/83 8300 7600 77000

SPS/N SPS/N 800/63 6300 5600 77000


8000 500 500 700 100 8 90 55
800 SPS/N 800/83 8300 7600 97000
SPS/N 1000/66 6600 5600 105000
SPS/N
SPS/N 1000/86 10000 8600 7600 750 500 900 90 8 80 75 125000
1000
SPS/N 1000/106 10600 9600 150000
SPS/N 1250/66 6600 5600 130000
SPS/N
SPS/N 1250/86 12500 8600 7600 750 500 900 90 7 75 2 x 45 145000
1250
SPS/N 1250/106 10600 9600 173000
SPS/N 1500/66 6600 5600 142000
SPS/N
SPS/N 1500/86 15000 8600 7600 750 500 900 90 7 70 2 x 45 171000
1500
SPS/N 1500/106 10600 9600 197000
SPS/N SPS/N 2000/88 8800 7600 200000
20000 750 500 1000 90 6,5 65 2 x 75
2000 SPS/N 2000/108 10800 9600 231000

SPS/N SPS/N 2500/88 8800 7600 234000


25000 750 500 1000 90 6,5 65 2 x 75
2500 SPS/N 2500/108 10800 9600 270000

16
SOMO
PRODUZIONE S.p.A.
Via S.Siro 43/45
20010 Cornaredo (MI) - ITALIA
Tel. +39 029362524
Fax +39 0293561457

Tel 02/9363124
Fax 02/93561457

You might also like