You are on page 1of 13

International Journal on New Computer Architectures and Their Applications (IJNCAA) 1(4): 1086-1098 The Society of Digital Information

and Wireless Communications, 2011 (ISSN: 2220-9085)

A Data Mining Approach to Construct Graduates Employability Model in Malaysia


Myzatul Akmam Sapaat, Aida Mustapha, Johanna Ahmad, Khadijah Chamili, Rahamirzam Muhamad Faculty of Computer Science and Information Technology, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia {angahmyz@yahoo.com, aida@fsktm.upm.edu.my, anna_lee207@yahoo.co.uk, khadijah@usim.edu.my, raha_muhd@yahoo.com} ABSTRACT
This study is to construct the Graduates Employability Model using classification task in data mining. To achieve it, we use data sourced from the Tracer Study, a webbased survey system from the Ministry of Higher Education, Malaysia (MOHE) for the year 2009. The classification experiment is performed using various Bayes algorithms to determine whether a graduate has been employed, remains unemployed or in an undetermined situation. The performance of Bayes algorithms are also compared against a number of tree-based algorithms. Information Gain is also used to rank the attributes and the results showed that top three attributes that have direct impact on employability are the job sector, job status and reason for not working. Results showed that J48, a variant of decision-tree algorithm performed with highest accuracy, which is 92.3% as compared to the average of 91.3% from other Bayes algorithms. This leads to the conclusion that a tree-based classifier is more suitable for the tracer data due to the information gain strategy.

KEYWORDS
Classification, Bayes Methods, Decision Tree, Employability

1 INTRODUCTION

Tracer Study is a web-based survey system developed by the Ministry of Higher Education, Malaysia (MOHE). It is compulsory to be filled by all students graduating from polytechnics, public or private institutions before their convocation for any level of degree awarded. The sole purpose of the survey is to guide future planning and to improve various aspects of local higher education administrative system. The survey also serves as a tool to gauge the adequacy of higher education in Malaysia in supplying manpower needs in all areas across technical, managerial or social science. Data sourced from the Tracer Study is invaluable because it provides correlation about the graduate qualifications and skills along with employment status. Graduates employability remains as national issues due to the increasing number of graduates produced by higher education institutions each year. According to statistics generated from the Tracer Study, total number of graduates produced by higher institutions in 2008 is 139,278. In 2009, the volume has increased to 155,278 graduates. Taking this into consideration, 50% of graduates in 2009 1086

International Journal on New Computer Architectures and Their Applications (IJNCAA) 1(4): 1086-1098 The Society of Digital Information and Wireless Communications, 2011 (ISSN: 2220-9085)

are bachelor holder from public and private universities. Only 49.20% or 38,191 of them successfully employed within the first six months after finishing their studies. Previous research on graduate employability covers wide range of domain such as education, engineering, and social science. While the researches are mainly based on surveys or interviews, little has been done using data mining techniques. Bayes theorem is among the earliest statistical method that is used to identify patterns in data. But as datasets have grown in size and complexity, data mining has emerged as a technology to apply methods such as neural networks, genetic algorithms, decision trees, and support vector machines to uncover hidden patterns [1]. Today, data mining technologies are dealing with huge amount of data from various sources, for example relational or transactional databases, data warehouse, images, flat files or in the form World Wide Web. Classification is the task of generalizing observations in the training data, which are accompanied by specific class of the observations. The objective of this paper is to predict whether a graduate has been employed, remains unemployed or in an undetermined situation within the first six months after graduation. This will be achieved through a classification experiment that classifies a graduate profile as employed, unemployed or others. The main contribution of this paper is the comparison of classification accuracy between various algorithms from the two most commonly used data mining techniques in the education domain,

which are the Bayes methods and decision trees. The remainder of this paper is organized as follows. Section 2 presents the related works on graduate employability and reviews recent techniques employed in data mining. Section 3 introduces the dataset and the experimental setting. Section 4 discusses finding of the results. Finally Section 5 concludes the paper with some direction for future work. 2 RELATED WORK A number of works have been done to identify the factors that influenced graduates employability in Malaysia. It is as an initiative step to align the higher education with the industry, where currently exists unquestionable impact against each other. Nonetheless, most of the previous works were carried out beyond the data mining domain. Besides, data sources for previous works were collected and assembled through survey in sample population. Research in [2] identifies three major requirements concerned by the employers in hiring employees, which are basic academic skills, higher order thinking skills, and personal qualities. The work is restricted in the education domain specifically analyzing the effectiveness of a subject, English for Occupational Purposes (EOP) in enhancing employability skills. Similar to [2], work by [3] proposes to restructure the curriculum and methods of instruction in preparing future graduates for the forthcoming challenges based on the model of the T-shaped professional and newly developed field 1087

International Journal on New Computer Architectures and Their Applications (IJNCAA) 1(4): 1086-1098 The Society of Digital Information and Wireless Communications, 2011 (ISSN: 2220-9085)

of Service Science, Management and Engineering (SSME). More recently, [4] proposes a new Malaysian Engineering Employability Skills Framework (MEES), which is constructed based on requirement by accrediting bodies and professional bodies and existing research findings in employability skills as a guideline in training package and qualification in Malaysia. Nonetheless, not surprisingly, graduates employability is rarely being studied especially within the scope of data mining, mainly due to limited and authentic data source available. Employability issues have also been taken into consideration in other countries. Research by The Higher Education Academy with the Council for Industry and Higher Education (CIHE) in United Kingdom concluded that there are six competencies that employers observe in individual who can transform the organizations and add values in their careers [5]. The six competencies are cognitive skills or brainpower, generic competencies, personal capabilities, technical ability, business or organization awareness and practical elements. Furthermore, it covers a set of achievements comprises skills, understandings and personal attributes that make graduates more likely to gain employment and successful in their chosen occupations which benefits the graduates, the community and also the economy. However, data mining techniques have indeed been employed in education domain, for instance in prediction and classification of student academic performance using Artificial Neural Network [6, 7] and a combination of

clustering and decision tree classification techniques [6]. Experiments in [8] classifies students to predict their final grade using six common classifiers (Quadratic Bayesian classifier, 1-nearest neighbour (1-NN), k-nearest neighbor (k-NN), Parzen-window, multilayer perceptron (MLP), and Decision Tree). With regards to student performance, [9] discovers individual student characteristics that are associated with their success according to grade point averages (GPA) by using a Microsoft Decision Trees (MDT) classification technique. [10] has shown some applications of data mining in educational institution that extract useful information from the huge data sets. Data mining through analytical tool offers user to view and use current information for decision making process such as organization of syllabus, predicting the registration of students in an educational program, predicting student performance, detecting cheating in online examination as well as identifying abnormal/erroneous values. Among the related work, we found that work done by [11] is most related to this research, whereby the work mines historical data of students' academic results using different classifiers (Bayes, trees, function) to rank influencing factors that contribute in predicting student academic performance. 3 MATERIALS AND METHODS The main objective of this paper is to classify a graduate profile as employed, unemployed or undetermined using data sourced from the Tracer Study database for the year of 2009. The dataset consists 1088

nternational Journal on New Computer Architectures and Their Applications (IJNCAA) 1(4): 1086-1098 The Society of Digital Information and Wireless Communications, 2011 (ISSN: 2220-9085)

of 12,830 instances and 20 attributes related to graduate profiles from 19 public universities and 138 private universities. Table 1 shows the complete attributes for the Tracer Study dataset. To construct the classifiers, we use the Waikato Environment for Knowledge Analysis (WEKA), an opensource data mining tool [12] which was

developed at University of Waikato New Zealand. It provides various learning algorithm that can be easily implemented to the dataset. WEKA only accepts dataset in Attribute-Relation File Format (ARFF) format. Therefore, once the data preparation being done, we transform the dataset into ARFF file with extension of .arff.

1089

International Journal on New Computer Architectures and Their Applications (IJNCAA) 1(4): 1086-1098 The Society of Digital Information and Wireless Communications, 2011 (ISSN: 2220-9085)

Table 1. Attributes from the Tracer Study dataset after the pre-processing is performed. No. 1 2 3 4 Attributes sex age univ level Values {male, female} {20-25, 25-30, 30-40, 40-50, >50} {public_univ, private_univ} {certificate, diploma, advanced_diploma, first_degree, postGraduate_diploma, masters_ thesis, masters_courseWork& Thesis, masters_courseWork, phd_ thesis, phd_courseWork&Thesis, professional} {technical, ict, education, science, art&soc_science } {2.00-2.49, 2.50-2.99, 3.00-3.66, 3.674.00, failed, 4.01-6.17} {employed, unemployed, others} {satisfied, extremely_satisfied, average, strongly_not_satisfied, not_satisfied, not_applicable} Descriptions Gender of the graduate Age of the graduate University/institution of current qualification Level of study for current qualification

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

field cgpa emp_status general_IT skills Malay_lang English_lang gen_knowledge interpersonal_ comm cc_thinking analytical prob_solving positive_value teamwork job_status job_sector

Field of study for current qualification CGPA for current qualification Current employment status Level of IT skills, Malay and English language proficiency, general knowledge, interpersonal communication, creative and critical thinking, analytical skills, problem solving, inculcation of positive values, and teamwork acquired from the programme of study

20

reason_not_ working

{permanent, contract, temp, self_ employed, family_business} {local_private_company, multinational_ company, own_company, government, NGO, GLC, statutory_body, others} {job_hunting, waiting_for_ posting, further_study, participating_skills_ program, waiting_posting_of_study, unsuitable_job, resting, others, family_ responsibilities, medical_ issues, not_ interested_to_work, not_going_to_work, lack_of_confidence, chambering}

Job status of employed graduates Job sector of employed graduates

Reason for not working for unemployed graduates

3.1 Data-Preprocessing The raw data retrieved from the Tracer Study database required pre-processing to prepare the dataset for the classification task. First, cleaning activities involved eliminating data with

missing values in critical attributes, identifying outliers, correcting inconsistent data, as well as removing duplicate data. From the total of 89,290 instances in the raw data, the data cleaning process ended up 12,830 instances that are ready to be mined. For 1090

International Journal on New Computer Architectures and Their Applications (IJNCAA) 1(4): 1086-1098 The Society of Digital Information and Wireless Communications, 2011 (ISSN: 2220-9085)

missing values (i.e., age attribute), we replaced them with the mean values of the attribute. Second, data discretization is required due to the fact that most of attributes from the Tracer Study are continuous attributes. In this case, we discretized the values into interval so as to prepare the dataset into categorical or nominal attributes as below.

cgpa previously in continuous number is transformed into grade range sex previously coded as 1 and 2 is transformed into nominal age previously in continuous number is transformed into age range field of study previously in numerical code 1-4 is transformed into nominal skill information (i.e., language proficiency, general knowledge, interpersonal communication etc) previously in numerical 1-9 is transformed into nominal employment status previously in numerical code 1-3 is transformed into nominal

set, supplied test set, cross validation and percentage split. If we use training set as the test option, the test data will be sourced from the same training data, hence this will decrease reliable estimate of the true error rate. Supplied test set permit us to set the test data which been prepared separately from the training data. Cross-validation is suitable for limited dataset whereby the number of fold can be determined by user. 10-fold cross validation is widely use to get the best estimate of error. It has been proven by extensive test on numerous datasets with different learning techniques [13]. With a number of dataset and to avoid overfitting, we employed hold-out validation method with 70-30 percentage split, whereby 70% out of the 12,830 instances is used for training while the remaining instances are used for testing. Various algorithms from both Bayes and decision tree families are used in predicting the accuracy of the employment status. Information Gain. Information Gain is an attribute selection measure uses in ID3. If node N represents tuples of partition D, attribute with highest information gain will be chosen as splitting attribute for node N. It resulted towards minimizing number of tests needed to classify a given tuples as well as guarantees that a simple tree is found. The expected information needed to classify a tuple in D is given by m Info(D) = - pi log2(pi) i=1

3.2 Classification Task The classification task at hand is to predict the employment status (employed, unemployed, others) for graduate profiles in the Tracer Study. The task is performed in two stages, training and testing. Once the classifier is constructed, testing dataset is used to estimate the predictive accuracy of the classifier. There are four types of testing option in WEKA, which are using the training

1091

International Journal on New Computer Architectures and Their Applications (IJNCAA) 1(4): 1086-1098 The Society of Digital Information and Wireless Communications, 2011 (ISSN: 2220-9085)

Bayes Methods. In Bayes methods, the classification task consists of classifying a class variable, given a set of attribute variables. It is a type of statistical in which the prior distribution is estimated from the data before any new data are observed, hence every parameter is assigned with a prior probability distribution [14]. A Bayesian classifier learns from the samples over both class and attribute variables. The nave Bayesian classifier works as follows: Let D be a training set of tuples and their associated class labels. As usual, each tuple is represented by an n-dimensional attribute vector, X = (x1, x2, , xn), depicting n measurements made on the tuple from n attributes, respectively, A1, A2, , An. Suppose that there are m classes, C1, C2, , Cm. Given a tuple, X, the classifier will predict that X belongs to the class having the highest posterior probability, conditioned on X. That is, the nave Bayesian classifier predicts that tuple X belongs to the class Ci if and only if P(Ci|X) > P(Cj|X) for 1 j m; j i Thus, we maximize P(Ci|X). The class Ci for which P(Ci|X) is maximized is called the maximum posteriori hypothesis. Under the Bayes method in WEKA, we performed the experiment with eight algorithms, which are Averaged OneDependence Estimators (AODE), AODEsr, WAODE, Bayes Network, HNB, Nave Bayesian, Nave Bayesian Simple and Nave Bayesian Updateable. AODE, HNB and Nave Bayesian was also used in [11] and the rest algorithms were chosen to further compare the

results from the Bayes algorithm experiment using the same dataset. AODE algorithm achieved the highest accuracy percentage averaging all of smaller searching-space in alternative naive Bayes-like models that have weaker and hence less detrimental independence assumptions than naive Bayes. The resulting algorithm is computationally efficient while delivering highly accurate classification on many learning tasks. AODEsr and WAODE are expended from AODE. AODEsr complement AODE with Subsumption Resolution, which is capable to detect specializations between two attribute values at classification time and deletes the generalization attribute value. Meanwhile, WAODE constructs the model called Weightily Averaged OneDependence Estimators by assigning weight to each dataset. Bayes Network learning using various search algorithms and quality measures. HNB constructs Hidden Naive Bayes classification model with high classification accuracy and AUC. In Naive Bayes, numeric estimator precision values are chosen based on analysis of the training data. The Nave Bayes Updateable classifier will use a default precision of 0.1 for numeric attributes when build classifier is called with zero training instances. Naive Bayes Simple modeled numeric attributes by a normal distribution. Tree Methods. Tree-based methods classify instances by sorting the instances down the tree from the root to some leaf node, which provides the classification of a particular instance. Each node in the tree specifies a test of 1092

International Journal on New Computer Architectures and Their Applications (IJNCAA) 1(4): 1086-1098 The Society of Digital Information and Wireless Communications, 2011 (ISSN: 2220-9085)

some attribute of the instance and each branch descending from that node corresponds to one of the possible values for this attribute [15]. Figure 1 shows the model produced by decision trees, which is represented in the form of tree structure. Under the tree method in WEKA, we performed the classification experiment with nine algorithms, which are ID3, J48, REPTree, J48graft, Random Tree, Decision Stump, LADTree, Random Forest and Simple Cart. J48 and REPTree was also used in [11], but we did not managed to use NBTree and BFTree because the experiment worked on large amount of datasets, thus incompatible with the memory allocation in WEKA. FT, User Classifier and LMT algorithm also experienced the same problem as NBTree and BFTree. In addition, we employed ID3, J48graft, Random Tree, Decision Stump, LAD Tree, Random Forest and Simple Cart to experiment with other alternative algorithms in decision tree.
root

ID3 is a class for constructing an unpruned decision tree based on the ID3 algorithm, which only deals with nominal attributes. J48 is a class for generating a pruned or unpruned C4.5 decision tree while J48 grafted generates a grafted (pruned or unpruned) C4.5 decision tree. REPTree is fast decision tree learner which builds a decision/ regression tree using information gain/ variance and prunes it using reducederror pruning (with backfitting). Decision stump is usually being used in conjunction with a boosting algorithm. A multi-class alternating decision tree is generated in LADTree using the LogitBoost strategy. Random Forest constructs a forest of random trees whereas Random Tree constructs a tree that considers K randomly chosen attributes at each node without pruning. SimpleCart implements minimal costcomplexity pruning. 4 RESULTS AND DISCUSSIONS We segregated the experimental results into three parts. The first is the result from ranking attributes in the Tracer Study dataset using the Information Gain. The second and third parts presents the predictive accuracy results by various algorithms from the Bayes method and decision tree families, respectively. 4.1 Information Gain In this study, we employed Information Gain to rank the attributes in determining the target values as well as to reduce the size of prediction. Decision 1093

node
leaf leaf

node
set of possible answers

node
set of possible answers

Figure 1. In a tree structure, each node denotes a test on an attribute value, each branch represents an outcome of the test, and tree leaves represent classes or class distributions. A leaf node indicates the class of the examples. The instances are classified by sorting them down the tree from the root node to some leaf node.

International Journal on New Computer Architectures and Their Applications (IJNCAA) 1(4): 1086-1098 The Society of Digital Information and Wireless Communications, 2011 (ISSN: 2220-9085)

tree algorithms adopt a mutualinformation criterion to choose the particular attribute to branch on that gain the most information. This is inherently a simple preference bias that explicitly searches for a simple hypothesis. Ranking attributes also increases the speed and accuracy in making

prediction. Based on the attribute selection using the Information Gain, the job sector attribute was found the most important factor in discriminating the graduate profiles to predict the graduates employment status. This is shown in Figure 2.

Figure 2. Job sector is ranked the highest by attribute selection based on Information Gain. This is largely because the attribute has small set of values, thus one instance is easily distinguishable than the remaining instances.

4.2 Bayes Methods Table 2 shows the classification accuracies for various algorithms under Bayes method. In addition, the table provides comparative results for the

kappa statistics, mean absolute error, root mean squared error, relative absolute error, and root relative squared error from the total of 3,840 testing instances.

1094

International Journal on New Computer Architectures and Their Applications (IJNCAA) 1(4): 1086-1098 The Society of Digital Information and Wireless Communications, 2011 (ISSN: 2220-9085)

The Weightily Averaged OneDependence Estimators (WAODE) algorithm achieved the highest accuracy percentage as compared to other algorithms. Despite treating each tree augmented naive Bayes equally, [16] have extended AODE by assigning

weight for each tree augmented naive Bayes differently as the facts that each attributes do not play the same role in classification.

Table 2. Classification accuracy using various algorithms under Bayes method in WEKA. Algorithm Accurac y (%) Error Rate (%) Kappa Mean Root Statistic Absolut Mean s e Error Squared Error 0.834 0.827 0.825 0.825 0.824 0.824 0.825 0.816 0.073 0.069 0.072 0.072 0.072 0.071 0.072 0.091 0.203 0.208 0.214 0.214 0.215 0.210 0.214 0.214 Relative Absolut e Error (%) 20.8 19.5 20.5 20.5 20.5 20.1 20.5 25.7 Root Relative Squared Error (%) 48.4 49.6 51.3 51.3 51.4 50.2 51.3 51.1

WAODE AODE Nave Bayesian Nave Bayes simple BayesNet AODEsr Nave Bayes Updateable HNB

91.3 91.1 90.9 90.9 90.9 90.9 90.9 90.3

8.7 8.9 9.1 9.1 9.1 9.1 9.1 9.7

4.3 Tree Methods Table 3 shows the classification accuracies for various algorithms under tree method. In addition, the table provides comparative results for the

kappa statistics, mean absolute error, root mean squared error, relative absolute error, and root relative squared error from the total of 3,840 testing instances.

Table 3. Classification accuracy using various algorithms under Tree method in WEKA. Algorithm Accuracy (%) 92.3 92.2 92.0 91.4 91.3 Error Rate (%) 7.7 7.8 8.0 8.6 8.7 Kappa Statistics 0.849 0.848 0.844 0.832 0.830 Mean Absolute Error 0.078 0.078 0.079 0.083 0.077 Root Mean Squared Error 0.204 0.204 0.199 0.205 0.197 Relative Absolute Error (%) 22.1 22.2 22.3 23.4 22.0 Root Relative Squared Error (%) 48.7 48.8 47.5 49.1 47.0

J48Graft J48 Simple Cart Random Forest LAD Tree

1095

International Journal on New Computer Architectures and Their Applications (IJNCAA) 1(4): 1086-1098 The Society of Digital Information and Wireless Communications, 2011 (ISSN: 2220-9085)

REPTree Decision Stump RandomTree ID3

91.0 91.0 88.9 86.7

9.0 9.0 11.1 13.3

0.825 0.821 0.787 0.795

0.080 0.108 0.081 0.072

0.213 0.232 0.269 0.268

22.8 30.6 23.0 21.1

50.9 55.3 64.4 65.2

The J48Graft algorithm achieved the highest accuracy percentage as compared to other algorithms. J48Graft generates a grafted C4.5 decision tree, whether pruned or unprunned. Grafting is an inductive process that adds nodes to the inferred decision tree. Unlike pruning that uses only information as the tree grows, grafting uses non-local information to provide better predictive accuracy. Figure 3 shows the difference of tree structure in a J48 tree as well as the grafted J48 tree.

Figure 3. The top figure is the tree structure for J48 and the bottom figure is the tree structure for grafted J48. Grafting adds nodes to the decision trees to increase the predictive accuracy. In the grafted J48, new branches are added in the place of a single leaf or graft within leaves.

Comparing the performance of both Bayes and tree-based methods, the J48Graft algorithm achieved the highest accuracy of 92.3% using the Tracer Study dataset. The second highest accuracy is also under Tree method, which is J48 algorithm with an accuracy of 92.2%. Bayes method only falls to number three using WAODE algorithm with prediction accuracy of 91.3%. Nonetheless, we found that both classification approaches were complementary because the Bayes methods provide better view of association or dependencies among the attributes while the results from the tree method are easier to interpret. Figure 4 shows the mapping of root mean squared error values that resulted from the classification experiment. This knowledge could be used in getting insights on the employment trend of graduates from local higher institutions.

1096

International Journal on New Computer Architectures and Their Applications (IJNCAA) 1(4): 1086-1098 The Society of Digital Information and Wireless Communications, 2011 (ISSN: 2220-9085)

0.3 0.25 HNB vs. ID3 5 0.2 0.15 0.1 0.05 0

1 AODE vs. J48Graft

2 Nave Bayesian

BayesNet vs. RandomT r 4 Nave Bayes Simple vs. REPT ree 3 Bayes Methods T ree-based Methods

Figure 4. A radial display of the root mean squared error across all algorithms under both Bayes and treebased methods relative to accuracy. The smaller the mean squared error, the better is the forecast. Based on this figure, three out of five tree-based algorithms indicate better forecast as compared to the corresponding algorithms under the Bayes methods.

6 CONCLUSIONS As the education sector blooms every year, graduates are facing stiff competitions to ensure their employability in the industry. The sole purpose of the Tracer Study system is to aid the higher educational institutions in preparing their graduates with sufficient skills to enter the job market. This paper focussed on identifying attributes that influenced graduates employability based on actual data from the graduates themselves after six month of graduation. Nonetheless, assembling the dataset was difficult because only 90% of the attributes made their way to the classification task. This is due to confidentiality and sensitivity issues, hence the remaining 10% of the attributes are not permitted by the data owner.

This paper attempts to predict whether a graduate has been employed, remains unemployed or in an undetermined situation within the first six months after their graduation. The prediction has been performed through a series of classification experiments using various algorithms under Bayes and decision methods to classify a graduate profile as employed, unemployed or others. Results showed that J48, a variant of decision-tree algorithm yielded the highest accuracy, which is 92.3% as compared to the average of 91.3% across other Bayes algorithms. As for future work, we are hoping to expand the dataset from the Tracer Study with more attributes and to annotate the attributes with information like correlation factor between the current employer and the previous employer. We are also looking at integration dataset from different sources of data, 1097

International Journal on New Computer Architectures and Their Applications (IJNCAA) 1(4): 1086-1098 The Society of Digital Information and Wireless Communications, 2011 (ISSN: 2220-9085)

for instance graduate profiles from the alumni organization in the respective educational institutions. Having this, next we plan to introduce clustering as part of pre-processing to cluster the attributes before attribute ranking is performed. Finally, other data mining techniques such as anomaly detection or classification-based association may be implemented in order to gain more knowledge on the graduates employability in Malaysia. Acknowledgments. Special thanks to Prof. Dr. Md Yusof Abu Bakar and Puan Salwati Badaroddin from Ministry of Higher Education Malaysia (MOHE) for their help with data gathering as well as expert opinion. 7 REFERENCES
1. Han, J., Kamber, M.: Data Mining: Concepts 2. Shafie,

3.

4.

5.

6.

and Techniques. Morgan Kaufman (2006) L.A, Nayan, S.: Employability Awareness among Malaysian Undergraduates. International Journal of Business and Management, 5(8):119--123 (2010) Mukhtar, M., Yahya, Y., Abdullah, S., Hamdan, A.R., Jailani, N., Abdullah, Z.: Employability and Service Science: Facing the Challenges via Curriculum Design and Restructuring. In: International Conference on Electrical Engineering and Informatics, pp. 357--361 (2009) Zaharim, A., Omar, M.Z., Yusoff, Y.M., Muhamad, N., Mohamed, A., Mustapha, R.: Practical Framework of Employability Skills for Engineering Graduate in Malaysia. In: IEEE EDUCON Education Engineering 2010: The Future Of Global Learning Engineering Education, pp. 921--927 (2010) Rees, C., Forbes, P., Kubler, B.: Student Employability Profiles: A Guide for Higher Education Practitioners (2006) Wook, M., Yahaya, Y.H., Wahab, N., Isa, M.R.M.: Predicting NDUM Students

Academic Performance using Data Mining Techniques. In: Second International Conference on Computer and Electrical Engineering, pp. 357--361 (2009) 7. Ogor, E.N.: Student Academic Performance Monitoring and Evaluation Using Data Mining Techniques. In: Fourth Congress of Electronics, Robotics and Automotive Mechanics, pp. 354--359 (2007) 8. Minaei-Bidgoli, B., Kashy, D.A., Kortemeyer, G., Punch, W.F.: Predicting Student Performance: An Application of Data Mining Methods with an Educational Webbased System. In: 33rd Frontiers in Education Conference, pp. 13--18 (2003) 9. Guruler, H., Istanbullu, A., Karahasan, M.: A New Student Performance Analysing System using Knowledge Discovery in Higher Educational Databases. Computers & Education. 55(1), pp 247--254 (2010) 10. Kumar, V., Chadha, A.: An Empirical Study of the Applications of Data Mining Techniques in Higher Education, International Journal of Advanced Computer Science and Applications, Vol. 2, No.3, March 2011, pp 80-84 (2011) 11. Affendey, L.S., Paris, I.H.M., Mustapha, N., Sulaiman, M.N., Muda, Z.: Ranking of Influencing Factors in Predicting Student Academic Performance. Information Technology Journal. 9(4):832--837 (2010) 12. Hall, M., Frank, E., Holmes, G., Pfahringer, B., Reutemann, P., Witten, I.H.: The WEKA Data Mining Software: An Update; SIGKDD Explorations, Volume 11, Issue 1 (2009) 13. Ian H. Witten, Eibe Frank:Data Mining : Practical Machine Learning Tools and Techniques, Morgan Kaufmann (2005) 14. Jaynes, E.T.: Probability Theory: The Logic of Science. Cambridge University Press (2003) 15. Mitchell, T.: Machine Learning. McGraw Hill, New York (1997) 16. L. Jiang, H. Zhang: Weightily Averaged OneDependence Estimators. In: Proceedings of the 9th Biennial Pacific Rim International Conference on Artificial Intelligence, PRICAI 2006, pp 970-974 (2006)

1098

You might also like