Professional Documents
Culture Documents
TECEfloor
The floor heating program for professionals
SLQ standard for parts that transfer water and that provide functions The tight production tolerances of the heating pipes in TECEfloor are perfectly tailored to the support and clamping ring of the clamped joint. The O ring of the clamped joint provides accurately dimensioned sealing in the manifolds Eurocone. In the servomotor, not only the union nut but also the lifting and closing dimension are adjusted to match the valve insert of the manifold.
In its own production facilities, TECE manufactures composite and plastic pipes for domestic installation on state-of-the-art machinery. The heating pipes are offered in dimensions 14 x 2 mm, 16 x 2 mm, 17 x 2 mm and 20 x 2 mm in a variety of material qualities.
TECEfloor heating pipe the right pipe for every requirement. SLQ floor heating pipe PE-Xc n Excellent creep rupture strength and resistant to scratches and grooves thanks to crosslinking, therefore ideal for the harsh conditions on a construction site. SLQ floor heating pipe PE-RT type 2 n Un-crosslinked material with far better creep rupture strength than PE-RT type 1. SLQ composite metal pipe PE-RT/AL/PE n The multi-layer composite pipe is dimensionally stable and therefore ideal for laying in dimpled sheets and clip rails.
The manifold range includes stainless steel and plastic manifolds as well as manifold housings in different sizes.
The two-way and three-way plastic manifolds from TECE can be easily connected with just two rotations and can be combined with each other as desired up to a 12-way manifold. This makes storage easier and provides greater flexibility on the construction site: If an additional heating circuit is required, two two-way modules, rather than one three-way module, are simply used.
Mounting systems/system panel From basic dimpled sheets or back-foamed dimpled sheets with thermal and sound insulation through to tacking sheets and backerboards, TECEfloor offers the required mounting system for every application scenario. The dimpled sheet is available in three insulation versions. The 6-cm grid is particularly suitable for heating pump systems (RA 120 or RA 180). The dimple structure enables pipes to be laid easily, even in the bends. Suitable for pipe dimensions 14, 16 and 17 mm.
TECEfloor laying
TECEfloor tacking pins Thanks to its special anchoring technique, the extrawide TECE tacking pin T 8 extra provides optimum hold for heating pipes, particularly in tacking sheets with woven film.
The associated insertion tool operates reliably and smoothly. Many of our customers swear by the tacking pins and insertion tool.
As a manufacturer of complex pipe and connection systems, TECE has its own recognized testing laboratory with several temperature change test machines, creep test containers and other testing equipment. For TECEfloor alone, more than 150 clamped joints with all pipe types are tested in a 5,000-cycle temperature change test. Typical sources of faults, such as those that arise as a result of incompatibility caused by purchasing a range of different individual parts, can therefore be eliminated reliably from the outset.
TECE GmbH International Business Hollefeldstrae 57 48282 Emsdetten Germany Phone +49 (0) 25 72/928 -999 Fax +49 (0) 25 72/928 -204 international-business@tece.de www.tece.biz
DS025 000 05 a