Professional Documents
Culture Documents
Contents
Introduction Spacial S3X, S3XEX
Stainless-steel wall-mounted enclosures
Spacial SDX, SDCX, SMX Stainless-steel HMI enclosures Spacial SMX PC Stainless-steel PC rack ClimaSys Thermal Control
The customised solutions Solutions to customise stainless-steel enclosures Page 16 Harmony XB4/XB5 Control and signalling units Magelis GTO, Panel PC HMI solutions for demanding applications PacDrive P4 Robotics Solutions Page 18
Page 22 Page 24
Stainless steel solutions guide | 3
resist aggression
How to choose
Maintenance recommendations
To be avoided
Metallic brushes and pads: risk of pitting corrosion if the equipment used is in ordinary steel. ads and powders, because too abrasive: risk of scratches which attach dirt and tend P to cause corrosion. rilling in the workshop: risk of contamination of the stainless steel, damage to the tool, D burrs, etc. Descale with hydrochloric acid. Disinfect with pure Javelle water.
To be preferred
Gentle nylon sponges and brushes. Pressure jet cleaners at a distance of one metre. Rinsing in clean water and complete drying. To perform cutting out in stainless steel, use special tools to avoid the risk of damaging the tools or contaminating the enclosure. Stainless steel solutions guide | 5
Scotch-Brite brushing
The method used is a brushing technique dened by the ASTM (American Society for Testing and Materials) for perfect corrosion resistance. Simple standard applications.
Protective painting
Greatest protection against attacks, external pollution and metallic particle spatter. Provides ultimate corrosion protection. Typical applications: marine, seaside, off-shore.
Technical recommendations
n the outer surfaces of the enclosure, avoid contact O with ferrous materials (aluminium, zinc, steel) which could cause scratching and hence lead to rusting. t is possible to place stainless steel in contact I with copper and nickel. lastic washers between the cubicle and the lifting P rings. n option: stainless steel screws and nuts, stainless O steel locks and handles.
How to choose
316L
Corrosion resistance
on-aggressive food environment N (cheese plant, slaughterhouse, etc.) on-aggressive chemical environment N (explosives, fertilizers, pharmaceuticals, etc.)
Severe environment
304L
Resistance to bacteria
Aggressive agents
Our recommendations in the presence of:
Alkaline solutions: Cold solutions have practically no action, but the same is not true of concentrated and hot solutions. aline solutions: S The behaviour is generally fairly good, except in the presence of certain salts such as chlorides; nitrates, on the contrary, promote passivation and improve resistance. ood products: F There is generally no problem of corrosion except with certain products which contain natural or added sulphurous components, such as mustard and white wines. rganic products: O They generally have no action on stainless steels, except if they are chlorinated. Glues, soaps, tars, petroleum products, etc. pose no problem. alts and other molten S mineral products: Alkaline products corrode all stainless steels, but nitrates, cyanides, acetates etc. do not attack them. Most other salts and molten metals cause rapid damage. Chlorides (salt in particular) 316L Marine atmospheres 316L Nitric acid 304L (316L if impurities in the acid). Sulphuric acid 316L (depends on the concentration). Phosphoric acid 304L/316L (beware of impurities, and in particular hydrofluoric acid). Acid sulphites (paper mills) 316L ydrochloric acid: H Corrosion increases progressively with the concentration; stainless steel prohibited. rganic acids: O Acetic, oxalic, citric acids, etc. have practically no effect.
External dimensions (mm) H 300 300 300 400 400 400 400 500 600 600 700 800 800 1000 1000 1200 1200 W 200 250 300 300 300 400 600 400 400 600 500 600 800 800 1000 800 1000 D 150 150 150 150 200 200 200 200 200 250 250 250 300 300 300 300 300
No. of locks 1 1 1 1 1 1 1 2 2 2 2 2 2 2 * 2 *
No. of Spacial S3X - IP66(1) - IK10(2) doors 304L stainless-steel Plain door 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 NSYS3X3215 NSYS3X302515 NSYS3X3315 NSYS3X4315 NSYS3X4320 NSYS3X4420 NSYS3X4620 NSYS3X5420 NSYS3X6420 NSYS3X6625 NSYS3X7525 NSYS3X8625 NSYS3X8830 NSYS3X10830 NSYS3X101030 NSYS3X12830 NSYS3X121030 Glazed door** NSYS3X4320T NSYS3X5420T NSYS3X6420T NSYS3X7525T NSYS3X8625T NSYS3X10830T -
316L stainless-steel Plain door IK10 NSYS3X3215H NSYS3X302515H NSYS3X3315H NSYS3X4315H NSYS3X4320H NSYS3X4420H NSYS3X4620H NSYS3X5420H NSYS3X6420H NSYS3X6625H NSYS3X7525H NSYS3X8625H NSYS3X8830H NSYS3X10830H NSYS3X101030H NSYS3X12830H NSYS3X121030H
304L stainless-steel canopy NSYTX2015 NSYTX2515 NSYTX3015 NSYTX3015 NSYTX3020 NSYTX4020 NSYTX6020 NSYTX4020 NSYTX4020 NSYTX6025 NSYTX5025 NSYTX6025 NSYTX8030 NSYTX8030 NSYTX10030 NSYTX8030 NSYTX10030
* Three-point closure system. ** The glazed door has no reinforcement. (1) For the double door: IP55. (2) For glazed door: IK08.
508A
enclosures
Spacial S3XEX ATEX wall-mounting Lock systems
NSYTC7CSX
NSYTT8CSX
NSYCL1242ECSX
NSYS3XEX4320
NSYCL405CSX
NSYS3XEX5420 NSYS3XEX6420 NSYS3XEX7525 NSYS3XEX8625 NSYS3XEX10830 Description Standard 3 mm double-bar lock Round 3 mm double-bar lock (spare) Round 3 mm double-bar lock 8 mm triangular insert 7 mm square insert 6 mm square insert 1242E handle lock 405 handle lock Material References chrome-plated zamak NSYSTDNCSX chrome-plated zamak NSYSTDCSX 100 % stainless-steel 100 % stainless-steel 100 % stainless-steel 100 % stainless-steel Chrome-plated Polyamide NSYSTDCXH NSYTT8CSX NSYTC7CSX NSYTC6CSX NSYCL1242ECSX NSYCL405CSX
304 316L
Spacial SMX - IP55 - IK10 304L / 316L Stainless-steel External Number Stainless-steel dimensions (mm) of front floor-standing monobloc doors H W D 1400 1600 1800 1800 1800 1800 2000 2000 2000 2000 1000 300 800 600 800 400 400 400 2 1 1 1 2 2 1 2 2 2 NSYSMX16840 NSYSMX18640 NSYSMX18840*
NSYSPXS3100H NSYSPXS4100H NSYSPXS4100H NSYSPXS4100H NSYSPXS4100H NSYSPXS4100H NSYSPXS5100H NSYSPXS4100H NSYSPXS5100H NSYSPXS6100H
NSYSPXF10200H NSYSPXF8200H NSYSPXF6200H NSYSPXF8200H NSYSPXF12200H NSYSPXF16200H NSYSPXF8200H NSYSPXF10200H NSYSPXF12200H NSYSPXF16200H
2 x NSYSPXS3100H 2 x NSYSPXS4100H 2 x NSYSPXS4100H 2 x NSYSPXS4100H 2 x NSYSPXS4100H 2 XNSYSPXS4100H 2 x NSYSPXS5100H 2 x NSYSPXS4100H 2 x NSYSPXS5100H 2 x NSYSPXS6100H
1200 400 1600 400 800 500 1000 400 1200 500 1600 600
NSYSMX181240* NSYSPXF12100H NSYSMX181640* NSYSPXF16100H NSYSMX20850 NSYSPXF8100H NSYSMX201040* NSYSPXF10100H NSYSMX201250* NSYSPXF12100H NSYSMX201660* NSYSPXF16100H
* For version in AISI 316L stainless-steel, add the lettre H to the end of the reference. Example NSYSMX18840H. ** See section on stainless-steel composition accessories.
Eyebolts (steel)
Rfrence NSYFCMX
Reference NSYSMEB
Reference NSYPHX200
Reference NSYPUNX
508A
enclosures
Spacial SFX Suitable enclosure
External Number Spacial SFX - IP55 - IK10 dimensions (mm) of front 304L(1) Stainless-steel doors Suitable H W D Set of 2 Coupling kit enclosure side panels NSYSFX18640 NSY2SPX184 NSYSFBK19 1800 600 400 1 1800 800 1800 1200 2000 600 2000 800 2000 800 2000 1000 2000 1200 400 1 400 2 500 1 400 1 600 1 600 2 600 2 NSYSFX18840 NSY2SPX184 NSYSFBK19 NSYSFX181240 NSY2SPX184 NSYSFBK19 NSYSFX20650 NSY2SPX205 NSYSFBK19 NSYSFX20840 NSY2SPX204 NSYSFBK19 NSYSFX20860 NSY2SPX206 NSYSFBK19 NSYSFX201060 NSY2SPX206 NSYSFBK19 NSYSFX201260 NSY2SPX206 NSYSFBK19
Brushed 316L stainless-steel plinth height 100 mm(2) Front + corner Side NSYSPXF6100H NSYSPXF8100H NSYSPXF6100H NSYSPXF8100H NSYSPXF8100H
Brushed 316L stainless-steel plinth height 200 mm(2) Front + corner Side 2 x NSYSPXS4100H 2 x NSYSPXS4100H 2 x NSYSPXS5100H 2 x NSYSPXS4100H 2 x NSYSPXS6100H
NSYSPXS4100H NSYSPXF6200H NSYSPXS4100H NSYSPXF8200H NSYSPXS5100H NSYSPXF6200H NSYSPXS4100H NSYSPXF8200H NSYSPXS6100H NSYSPXF8200H
(1) 316L stainless-steel enclosures on request. (2) See section on stainless-steel composition accessories.
Closure option
For enclosures with dimensions (mm) References W 600 600 800 800 800 1000 1000 1000 1200 1200 1200 1600 1600 D 400 500 400 500 600 300 400 600 400 500 600 400 600 NSYSCX6040 NSYSCX6050 NSYSCX8040 NSYSCX8050 NSYSCX8060 NSYSCX10030 NSYSCX10040 NSYSCX10060 NSYSCX12040 NSYSCX12050 NSYSCX12060 NSYSCX16040 NSYSCX16060
Description Spare handle 5 mm double-bar insert 6 mm square insert 7 mm square insert 8 mm square insert 6.5 mm triangular insert 8 mm triangular insert Padlocking device
Pack. 1 1 1 1 1 1 1 1
Spacial SDX - IP55 - IK10 304L stainless-steel Dimensions(mm) Control desk No. of references front H W D doors 1000 600 500 NSYSDX6 1 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 600 800 800 800 500 500 500 500 NSYSDX6 NSYSDX8 NSYSDX8 NSYSDX8 NSYSDX10 NSYSDX10 NSYSDX10 NSYSDX10 NSYSDX12 NSYSDX12 NSYSDX12 NSYSDX12 NSYSDX12 1 1 1 1 2 2 2 2 2 2 2 2 2
316L stainless-steel plinth, height 100 mm Front + corner NSYSPXF6100H NSYSPXF6100H NSYSPXF8100H NSYSPXF8100H NSYSPXF8100H NSYSPXF10100H NSYSPXF10100H NSYSPXF10100H NSYSPXF10100H NSYSPXF12100H NSYSPXF12100H NSYSPXF12100H NSYSPXF12100H NSYSPXF12100H Side NSYSPXS5100H NSYSPXS5100H NSYSPXS5100H NSYSPXS5100H NSYSPXS5100H NSYSPXS5100H NSYSPXS5100H NSYSPXS5100H NSYSPXS5100H NSYSPXS5100H NSYSPXS5100H NSYSPXS5100H NSYSPXS5100H NSYSPXS5100H
316L stainless-steel plinth, height 200 mm Front + corner NSYSPXF6200H NSYSPXF6200H NSYSPXF8200H NSYSPXF8200H NSYSPXF8200H NSYSPXF10200H NSYSPXF10200H NSYSPXF10200H NSYSPXF10200H NSYSPXF12200H NSYSPXF12200H NSYSPXF12200H NSYSPXF12200H NSYSPXF12200H Side 2 x NSYSPXS5100H 2 x NSYSPXS5100H 2 x NSYSPXS5100H 2 x NSYSPXS5100H 2 x NSYSPXS5100H 2 x NSYSPXS5100H 2 x NSYSPXS5100H 2 x NSYSPXS5100H 2 x NSYSPXS5100H 2 x NSYSPXS5100H 2 x NSYSPXS5100H 2 x NSYSPXS5100H 2 x NSYSPXS5100H 2 x NSYSPXS5100H
1000 500 1000 500 1000 500 1000 500 1200 500 1200 500 1200 500 1200 500 1200 500
508A
IEC 62208
Spacial SMX - IP55 - IK10 304L Stainless-steel External PC rack dimensions (mm) references H W D 1600 600 1800 600 600 600 NSYSMX16660PC NSYSMX18660PC
Hygienic feet
Brushed 316L stainless-steel plinth height 100 mm H 100 to 200 (mm) Front + corner Side
NSYPHX200 NSYPHX200
NSYSPXF6100H NSYSPXF6100H
NSYSPXS6100H NSYSPXS6100H
NSYSPXF6200H NSYSPXF6200H
2 x NSYSPXS6100H 2 x NSYSPXS6100H
Spacial SDCX - IP55 - IK10 - Modular Console - 304L stainless-steel Modular Console Width (mm) 400 600 400 400 600 400 600 600 400 + 600 400 400 + 600 600 600 600 Depth: 200 mm NSYSDCX42 NSYSDCX62 NSYSDCX42 2 x NSYSDCX42 NSYSDCX62 NSYSDCX42 NSYSDCX62 NSYSDCX62 NSYSDCX42 + NSYSDCX62 NSYSDCX42 NSYSDCX42 + NSYSDCX62 NSYSDCX62 NSYSDCX62 2 x NSYSDCX62 Depth: 300 mm NSYSDCX43 NSYSDCX63 NSYSDCX43 2 x NSYSDCX43 NSYSDCX63 NSYSDCX43 NSYSDCX63 NSYSDCX63 NSYSDCX43 + NSYSDCX63 NSYSDCX43 NSYSDCX43 + NSYSDCX63 NSYSDCX63 NSYSDCX63 2 x NSYSDCX63
Blanking covers
NSYRPX2 2 x NSYRPX2 NSYRPX2 3 x NSYRPX2 2 x NSYRPX2 2 x NSYRPX2 4 x NSYRPX2 NSYRPX2 3 x NSYRPX2 3 x NSYRPX2 -
Description Holds the desk lid in open position at an angle of 75. Delivered with fixings.
Description
The stays are 13 delivered as standard with the control desks, 13 according to the 17 following table: 15
Thermal Control
Ventilation systems with filters
Fan flow rate (m3/h) Free with filter 50 Hz 38 38 58 44 85 79 80 79 165 164 188 193 302 302 262 247 562 582 838 983 931 With 1 outlet grille 50 Hz 25 27 39 34 63 65 57 59 153 153 171 171 260 263 221 210 473 485 718 843 798 With 2 outlet grilles 50 Hz 33 35 47 41 71 73 77 68 161 161 179 179 268 271 229 218 481 494 728 854 809 230 V 115 V 24 V DC 48 V DC 230 V 115 V 24 V DC 48 V DC 230 V 115 V 24 V DC 48 V DC 230 V 115 V 24 V DC 48 V DC 230 V 115 V 230 V 115 V 400/440 V Voltage Forced ventilation systems Fan with filter IP54 - RAL 7035 NSYCVF38M230PF NSYCVF38M115PF NSYCVF38M24DPF NSYCVF38M48DPF NSYCVF85M230PF NSYCVF85M115PF NSYCVF85M24DPF NSYCVF85M48DPF NSYCVF165M230PF NSYCVF165M115PF NSYCVF165M24DPF NSYCVF165M48DPF NSYCVF300M230PF NSYCVF300M115PF NSYCVF300M24DPF NSYCVF300M48DPF NSYCVF560M230PF NSYCVF560M115PF NSYCVF850M230PF NSYCVF850M115PF NSYCVF850M400PF NSYCAG92LPF Outlet grille Colour kit IP54 - RAL 7032 NSYCAG92LPC Aluzinc cover IP55 - RAL7035 Stainless-steel cover - IP 55 EMC cover IP54 - RAL7035 -
NSYCAG125LPF NSYCAG125LPC
NSYCAP125LZF
NSYCAP125LXF NSYCAP125LE
NSYCAG223LPF NSYCAG223LPC
NSYCAP223LZF
NSYCAP223LXF NSYCAP223LE
NSYCAG291LPF NSYCAG291LPC
NSYCAP291LZF
NSYCAP291LXF NSYCAP291LE
(1) Fan models with connection type (F) are delivered with the connection cord included (2 metres).
Air-air exchangers
Side-mounting models IP54 - RAL 7035 Dimensions (mm) H W D
700 780 780 1480 340 270 325 325 450 600 144 144 144 144 360
Air-water exchangers
Side and top-mounting models IP54 - RAL 7035 Dimensions (mm) H W D
830 950 310 360 400 600 113 190 365
References
NSYCEA15W230VL NSYCEA35W230VL NSYCEA35W230VLE NSYCEA70W230VL NSYCEA50W230VRE
References
NSYCEW2100W230VL NSYCEW3150W230VL NSYCEW2100W230VR
Cooling units
Side-mounting models IP54 - RAL 7035 External Control References dimensions (mm)
450 x 350 x 140 620 x 300 x 170 800 x 350 x 195 900 x 400 x 195 1010 x 400 x 240 1010 x 400 x 240 1010 x 400 x 240 1000 x 400 x 220 1000 x 400 x 220 1010 x 400 x 240 1406 x 502 x 300 1406 x 502 x 300 Thermostat Thermostat Thermostat Thermostat Electronic controller Electronic controller Electronic controller Thermostat Thermostat Electronic controller Thermostat Thermostat NSYCU240W230VL NSYCU370W230VL NSYCU760W230VL NSYCU1050W230VL NSYCUE1100W230L NSYCUE1400W230L NSYCUE1400W400L NSYCU1650W230VL NSYCU1800W400VL NSYCUE1800W400L NSYCU2500W400VL NSYCU4000W400VL
Top-mounting models IP54 - RAL 7035 External dimensions (mm) Control References
NSYCU760W230VR NSYCU1050W230VR NSYCUE1400W230R NSYCU1460W230VR NSYCU1650W230VR NSYCUE1800W400R NSYCU2000W400VR NSYCU2450W400VR NSYCU3100W400VR
340 x 600 x 350 Thermostat 400 x 700 x 400 Thermostat 415 x 750 x 412 Electronic controller 400 x 700 x 400 Thermostat 430 x 700 x 400 Thermostat 415 x 750 x 412 Electronic controller 430 x 700 x 400 Thermostat 470 x 800 x 450 Thermostat 470 x 800 x 450 Thermostat
1500 W
NSYCUB1500W230S NSYCUB1500W400S NSYCUB1500W115S
2200 W
NSYCUB2200W230S NSYCUB2200W400S NSYCUB2200W115S
2700 W
NSYCUB2700W230S NSYCUB2700W400S
Flush-mounting
NSYCUCF
Surface-mounting
NSYCUCLX
Partial flush-mounting
NSYCUCHX
Flush-mounting
NSYCUCFX
Resistance heaters
Insulated resistance heater with fan Power (W)
177
Voltage (V)
230 AC
Reference
NSYCR170W230VVC
New!
Depth (mm)
1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6
Voltage (V)
12-24 DC 110-250 AC 12-24 DC 110-250 AC 270-420 AC 12-24 DC 110-250 AC 270-420 AC 12-24 DC 110-250 AC 270-420 AC 12-24 DC 110-250 AC 270-420 AC
Power (W)
10 10 25 25 50 50 100 100 200 200
Width (mm)
250 250 250 250 320 320 450 450 650 650
References
NSYCRS10W120V NSYCRS10W240V NSYCRS25W120V NSYCRS25W240V NSYCRS50W120V NSYCRS50W240V NSYCRS100W120V NSYCRS100W240V NSYCRS200W120V NSYCRS200W240V
* Ultra thin resistance heaters can be manufactured with different dimensions and power ratings than those indicated above. Please contact us.
Voltage (V)
115 AC 230 AC 115 AC 230 AC 115 AC 230 AC
References
NSYCR250W115VV NSYCR250W230VV NSYCR400W115VV NSYCR400W230VV NSYCRS200W115V NSYCRS200W230V
Temperature control
Control a resistance heater or an alarm Setting range
0...+60 C +32...+140 F
References
NSYCCOTHC NSYCCOTHCF
References
NSYCCOTHO NSYCCOTHOF
NC thermostat
NO thermostat
References
NSYCCOTHD NSYCCOTHDF
References
NSYCCOTHI NSYCCOTHIF
Thermostat with inverse contact Control temperature and relative humidity Setting range
+5 C +50 C
Display
C ou F
References
NSYCCOTH30VID NSYCCOTH120VID NSYCCOTH230VID
Display
C ou F
References
NSYCCOHYT30VID NSYCCOHYT120VID NSYCCOHYT230VID
Electronic thermostat
7 different operating modes. Option of installing one or two external sensors. Control relative humidity Setting range
20 %80 %
Electronic hygrotherm
3 different operating modes. Option of installing an external sensor. PTC external temperature sensor (double insulation)
Display
% RH
Reference
NSYCCOHY230VID
Reference
NSYCCAST
Electronic hygrostat
Temperature sensor
Configured:
Specific:
316L
Configured offers
16 | Stainless steel solutions guide
Specific offers
Installation simplified
Cut-outs done before No burrs on edges painting guarantees of cut-outs better anti-corrosion/ Guaranteed sealing machining tolerances Painting service for better protection
Quality improved
Aesthetics
Large choice of colours External surfaces with no scratches
Higher performances
Adapted thermal management Upgraded stainless steel type
Logistics
Flexible management of your logistic option (scheduled delivery service for on-going orders, etc). Special packaging
Time saving
Delivered with cut-outs & painting: no waste of time
Ergonomic design
Harmony XB4/XB5
Control and signalling units
Complete range
These pushbuttons are available in XB4 metal bodied and XB5 plastic bodied versions, and both are tted with an external boot to protect against liquid and dust ingress into the head itself.
More than
200
million
products in service
IP66 IP69K
performance
100%
customizable head marking
100%
Worldwide availability
ZB4 BC580
ZBZ1902
Pushbutton heads with integral bellows seal IP69K Also available in a marked version with personalized marking XB4 range: metal XB5 range: plastic ZB4 BC ZB5 AC 80 80
ZB4BP58
ZB5AP4
ZB4BP3S
ZB5AP183
ZB4BP183
Silicone booted pushbutton head IP69K Flush Projecting Transparent boot Transparent boot to insert a label in the head Not compatible with label holders ZB4 range: metal ZB5 range: plastic ZB4 BP ZB5 AP 8 8 ZB4 BP ZB5 AP
Silicone booted pushbutton head IP66 Flush Flush Coloured boot Transparent boot to insert a label in the head
Accessory for pushbutton head Food processing type transparent boot for flush or projecting round head ZBP 0A
ZB4 BP ZB5 AP
S S
ZB4 BP ZB5 AP
83 83
Complete with the colour code: 1=White, 2=Black, 3=Green, 4=Red, 5=Yellow, 6=Blue, 7=Grey, 9=Light blue
ZB4BD4
ZBD D2
Accessory 3 positions +/- 45 Boot for operating handle ZB4 BD - ZB5 AD ZB4 BD 5 ZB5 AD 5 ZBD D2
ZB4 BD 2 ZB5 AD 2
ZB4 BD 4 ZB5 AD 4
ZB4 BD 3 ZB5 AD 3
ZB4BG0
ZBGP
Accessory 3 positions +/- 45 Boot for lock to protect the barrel in the absence of a key ZBG P
ZB4 BG 2 ZB5 AG 2
ZB4 BG 4 ZB5 AG 4
ZB4 BG 6 ZB5 AG 6
ZB4 BG 3 ZB5 AG 3
Emergency stop switch with fast locking and mechanical latching IP66 Push-pull Rotate to unlock 40 mm ZB4 BT 84 ZB4 BS 844 ZB5 AT 84 ZB5 AS 844 Also available in 60 mm diameter
Bellows seal for emergency stoppage in severe environments IP69K Protection against ingress of water and dust EPDM Silicone EPDM Black Red Yellow ZBZ28 ZBZ48 ZBZ58 Contact functions, screw and clamp connection 1 2 1 ZB4 BZ 101 ZB4 BZ 102 ZB4 BZ 103 ZB5 AZ 101 ZB5 AZ 102 ZB5 AZ 103
ZB4BZ101
Accessory Boot for contact blocks. Protection against ingress of water and dust ZBZ60
Architecture solutions
for integration into industrial and building environments
Permanent availability
Maximum availability of your control function Reduced maintenance with no battery to replace, recharge or recycle Energy-efcient thanks to non-current consuming transmitter
Proven robustness
High resistance to contamination from dust (no cable entry) No risk of cable damage or loosened screws on the transmitter Proven quality and performance of the Harmony range
Industrial applications
Suitable for a wide range of industrial applications, including explosive atmospheres for dust and gas environments.
Building applications
Compliant with DIN 43380 standard.
battery to replace
no
-20%
Automatic doors
Packaging
Only 1 transmitter per receiver Plastic head Transmitter with plastic pushbutton ZB5R in ergonomic enclosure Non-configurable receiver, 1 CO relay output XB5RMB03
Up to 32 transmitters per receiver Metal head Transmitter with plastic pushbutton ZB5R in ergonomic enclosure Set of 10 pushbutton caps Configurable receiver, 2 CO relay outputs XB5RMA04
Transmitter with plastic or metal pushbutton Set of 10 pushbutton caps Configurable receiver, 2 CO relay outputs
XB5RFB01
XB4RFB01
XB5RFA02
XB4RFA02
Pushbutton ZB5RTA2
Receiver ZBRRA
Ethernet Modbus /TCP module ZBRCETH Serial link Modbus module ZBRN2
60 3
Easy set up
Manual parameter interface DTM interface and web pages with PC SD card + csv files with PC
setting modes
Based on new Magelis HMI, Schneider Electric proposes a large range of products for cleanliness and explosive industrial environments.
Designed to meet dedicated environments requirements Relevant certifications and standards Adaptable to your automation architectures
Stainless steel enclosures S.X & S3XEX Scada software Vijeo Citect
Stainless steel cover Magelis GTO Stainless steel bezel Magelis Panel PC & Open Panel Pushbutton IP 69K Harmony XB4/XB5 Pick & place machines Delta 3 & PackDrive 22 | Stainless steel solutions guide
applications
Data sharing IT integration Advance reports SCADA clients
Benefits
Designed to meet demanding environment requirements The cleanliness is provided by the absence of front joints or groove, and by the corrosion resistant stainless steel grade 304. Dedicated certifications and standards Adapted to hazardous locations: UL & & ATEX** Designed to meet hygiene requirements: EN 1672-2 Non migrating at seals to avoid contamination: FDA 21 CFR 177.2006 IDS add-on for software traceability: FDA 21 CFR Part11 Adaptable to your automation architectures From ultra rugged operator panel Magelis GTO to Magelis Panel PC, ready to be integrated with your IT structure
Panel PC Performance
15
Panel PC Universal Panel PC Optimum & Open panels Local HMI GTO 5.7 10.4 12.1
15
15
Screen size
Screen size Magelis GTO Magelis Panel PC* Performance HDD** Universal HDD Flash disk Optimum compact Open Panel flash compact flash
5.7
10.4
12.1
*Other configuration on request by IPC configured service, ** Panel PC Performance not ATEX
PacDrive P4
Robotics Solutions
The P4 delta3 robot, featuring full stainless steel construction, is designed for pick & place applications. The software includes a preprogrammed interface for integration of the most commonly encountered vision solution. The P4 can be equipped with an optional rotational axis (P4s-R). The P4 robot arm is driven by conventional motors with cabinet-mounted servo drives (P4s-F or P4s-R) or by intelligent servo modules with integrated control electronics (P4i-F or P4i-R). Thanks to their IP 65 rated washdown con guration, the P4s-F and the P4s-R are also suitable for hygienic environments. The P4 is also available in an ISO 14644-1-certied Class 6 cleanroom design.
Type Load capacity Max. speed Max. acceleration at 1kg Max. acceleration at 1.5kg Number of axes Repeatable position accuracy Work envelope height Work envelope diameter Work envelope rotation* P4s-F / P4s-R P4i-F / P4i-R 1.5 [kg]* 10 [m/sec] 100 [m/sec2] 75 [m/sec2] 3 (4**) +/- 0,1 [mm] 225 / 350 [mm] 1200 / 750 [mm] Unlimited
* up to a maximum of 3.5 kg with reduced acceleration ** including rotational axis in the R version Subject to change without notice
LMC 101C, 201C, 300C, 400C, 600C Logic Motion Controllers Magelis HMI Safe Logic Controller* SLC x00
IT/COM Logic Motion
TM5 I/O
Distribution Box
SH
SH
Torque Motor
Linear Motor
ILM 62
A safety protocol via sercos III enables the complete integration of safe communication into standard communication, without the need for additional dedicated cabling or a safety bus. Safety signals from data acquisition or dialog devices are connected through safety terminals or remote I/Os. A safety controller on the sercos III ring permits programming of the safety functions. Both standard safety functions and safety functions enhanced in accordance with PLCOpen Safety de nitions can be implemented with the integrated solution.
SoMachine Motion Workbench is a programming tool for the engineering functions. In addition to the program editor, it also contains tools to set the safety device parameters for functional safety components (drives, I/O components, etc.). The Safe Logic Controller can be programmed directly via the PacDrive controller, which functions as a gateway.
Fully integrated safety solution Reduced installation costs, no more dedicated cabling Integrated Workbench tool for safety software in IEC 61131-3
Other classic designs based upon hardwired safety components can of course also be implemented. Please consult with our experts to determine which Preventa products are right for you.
Notes
Notes
www.schneider-electric.com
As standards, specifications and designs change fromtime to time, please ask for confirmation of the information given in this publication. Publication: Schneider Electric Industries SAS Photos: Schneider Electric Printed:
07-2013