Professional Documents
Culture Documents
Page 1 of 6
Bookstore Home
Product Listing
AWWA products meeting your selection criteria are listed below. You can also search for products relevant to keywords of your choice. C500-02 METAL SEATED GATE VALVES FOR WATER SUPPLY SERVICE (INCLUDES ADDENDUM C500a 95) - Available Need it now? Download it! This standard covers iron-body, bronze-mounted, nonrising-stem (NRS) gate valves including tapping gate valves, 3 in. (75 mm) NPS through 48 in. (1200 mm) NPS, and outside screw and yoke (OS & Y) rising-stem gate valves, 3 in. (75 mm) NPS through 12 in. ( Nonmember Price $65.00 Member Price Qty: 1 $43.00
Product Types
The Water Library It's New AWWA Standards Manuals of Water Supply Practices Books Videos AWWA Conference Proceedings CDs / Software Research Reports
Need it now? Download it! This standard covers post-type, dry-barrel fire hydrants with compression shutoff (opening against or with the pressure) or gate shutoff for use in water supply service in all climates, including those where freezing occurs. Nonmember Price $65.00 Member Price Qty: 1 $43.00
C503-05 WET BARREL FIRE HYDRANTS - Available Need it now? Download it! This standard pertains to the various types and classes of wet-barrel fire hydrants for use in water-supply service in areas where the climate is mild and freezing temperatures do not occur. Nonmember Price $65.00
$43.00
C504-00 RUBBER SEATED BUTTERFLY VALVES - Available Need it now? Download it! This standard covers rubber-seated butterfly valves, 3 in. (75 mm) through 72 in. (1,800 mm) in diameter, with various body and end types, for fresh
http://apps.awwa.org/ebusmain/OnlineStore/ProductListing/tabid/209/Defau... 6/16/2009
Product Listing
Page 2 of 6
water having a pH range from 6 to 12 and a temperature range from 33 to 125F (0.6 to 52C). Nonmember Price $65.00 Member Price Qty: 1 $43.00
C507-05 BALL VALVES, 6 INCH THRU 48 INCH (150 mm THRU 1,200 mm) - Available Need it now? Download it! This standard covers gray-iron, ductile-iron, and cast-steel, flanged-end, tight-shutoff, shaft- or trunnion-mounted, full-port, double- and single-seated ball valves for pressures up to 300 psi (2,100 kPa) in sizes from 6-in. through 48-in. (150-mm throu Nonmember Price $65.00 Member Price Qty: 1 $43.00
C508-01 SWING-CHECK VALVES FOR WATERWORKS SERVICE 2-IN THROUGH 24-IN (50-MM THROUGH 600-MM) NPS - Available Need it now? Download it! This standard covers only iron-body, bronze-mounted, nonassisted, swingcheck valves, 2-24 in. (50-600 mm) NPS, with mechanical-joint or flanged ends that are installed horizontally in water systems. The manufacturer should be consulted for special condit Nonmember Price $65.00 Member Price Qty: 1 $43.00
C509-01 RESILIENT SEATED GATE VALVES FOR WATER SUPPLY SERVICE (INCLUDES ADDENDUM C509a 95) - Available Need it now? Download it! This standard covers iron-body, resilient-seated gate valves, including tapping gate valves, with nonrising stems (NRS) and outside-screw-and-yoke (OS&Y) rising stems for water supply service. Nonmember Price $65.00 Member Price Qty: 1 $43.00
C510-07 DOUBLE CHECK VALVE BACKFLOW PREVENTION ASSEMBLEY - Available Need it now? Download it! This standard covers the double check valve backflow prevention assembly. Nonmember Price $65.00 Member Price $43.00
http://apps.awwa.org/ebusmain/OnlineStore/ProductListing/tabid/209/Defau... 6/16/2009
Product Listing
Page 3 of 6
Qty: 1
C511-07 REDUCED PRESSURE PRINCIPLE BACKFLOW PREVENTION ASSEMBLY - Available Need it now? Download it! This standard covers the reduced-pressure principle backflow prevention assembly. Nonmember Price $65.00 Member Price Qty: 1 $43.00
C512-07 AIR RELEASE, AIR/VACUUM, AND COMBINATION AIR VALVES FOR WATERWORKS SERV. - Available Need it now? Download it! This standard describes 1/2-in. (13mm) through 6-in. (150mm) air-release valvesand 1/2-in. (13-mm) through 20-in. (500-mm) air/vacuum and combination air valves having gray cast-iron or ductile-iron bodies and covers. Nonmember Price $65.00 Member Price Qty: 1 $43.00
C513-05 OPEN CHANNEL, FABRICATED METAL SLIDE GATES - Available Need it now? Download it! This standard covers open-channel, fabricated metal slide gates and openchannel, fabricated metal weir gates. Nonmember Price $65.00 Member Price Qty: 1 $43.00
C515-01 REDUCED WALL, RESILIENT SEATED GATE VALVES FOR WATER SUPPLY SERVICE - Available Need it now? Download it! This standard covers reduced wall, resilient-seated gate valves with nonrising stems (NRS) and outside screw-and-yoke (OS&Y) rising stems, including tapping gate valves, for water supply service having a temperature range of 33 degrees to 125 degrees F (0 Nonmember Price $65.00 Member Price Qty: 1 $43.00
C517-05 RESILIENT-SEATED CAST IRON ECCENTRIC PLUG VALVES Available Need it now? Download it!
http://apps.awwa.org/ebusmain/OnlineStore/ProductListing/tabid/209/Defau... 6/16/2009
Product Listing
Page 4 of 6
This standard describes resilient-seated cast-iron eccentric plug valves, 3 in. (75mm) through 72 in. (1,800 mm) in diameter, with flanged, grooved, or mechanical-joint ends. Nonmember Price $65.00 Member Price Qty: 1 $43.00
C518-08 DUAL-DISC SWING-CHECK VALVES FOR WATERWORKS SERVICE - Available Need it now? Download it! This standard describes minimum requirements for dual-disc, swing-check valves, sizes 2 in. through 48 in. (50 mm through 1,200 mm) for water service, including materials, design, manufacture, testing, and inspection. Nonmember Price $65.00 Member Price Qty: 1 $43.00
C530-07 PILOT OPERATED CONTROL VALVES - Available Need it now? Download it! The purpose of this standard is to define the minimum requirements for pilotoperated control valves, including sizing considerations, design verification, testing, delivery, handling, and storage.
C540-02 POWER ACTUATION DEVICES FOR VALVES & SLUICE GATES Available Need it now? Download it! This standard covers power-actuating devices for valves 3 in. (75 mm) in diameter and larger and sluice gates in ordinary water service. Nonmember Price $65.00 Member Price Qty: 1 $43.00
C550-05: PROTECTIVE INTERIOR COATINGS FOR VALVES & HYDRANTS - Available Need it now? Download it! This standard decribes the special protective interior coatings for valves and hydrants used for water supply service. Nonmember Price $65.00 Member Price $43.00
http://apps.awwa.org/ebusmain/OnlineStore/ProductListing/tabid/209/Defau... 6/16/2009
Product Listing
Page 5 of 6
Qty: 1
C560-07 CAST IRON SLIDE GATES - Available Need it now? Download it! This standard describes vertically mounted, cast-iron slide gates designed for either seating head or unseating head, or both, in water supply service.
C561-04 FABRICATED STAINLESS STEEL SLIDE GATES - Available Need it now? Download it! This standard describes minimum requirements for fabricated stainless steel slide gates, including materials, general design, manufacture, testing, inspection, and shipment. Nonmember Price $65.00 Member Price Qty: 1 $43.00
C563-04 FABRICATED COMPOSITE SLIDE GATES - Available Need it now? Download it! This standard describes vertically mounted, fabricated composite, resilientseated slide gates designed for either seating or unseating head, or both, in ordinary water supply service. Nonmember Price $65.00 Member Price Qty: 1 $43.00
VALVES SET - Out of Stock Save 20% on this set of related AWWA Standards and Manuals. Nonmember Price $642.00 Member Price Qty: 1 $428.00
FIRE HYDRANTS SET - Out of Stock Save 20% on this set of related AWWA Standards and Manuals. Nonmember Price $165.00 Member Price Qty: 1 $110.00
http://apps.awwa.org/ebusmain/OnlineStore/ProductListing/tabid/209/Defau... 6/16/2009
Product Listing
Page 6 of 6
Copyright 2009 American Water Works Association - 6666 W. Quincy Ave., Denver, CO 80235 Phone: 303.794.7711 or 800.926.7337 - FAX: 303.347.0804 - Privacy Policy
http://apps.awwa.org/ebusmain/OnlineStore/ProductListing/tabid/209/Defau... 6/16/2009