To connect AMR devices to a PC or Printer via 9-Pin Sub-D Connector
Model ZA1909-DK ALMEMO RS232 Connector Cable, 5-foot cable ZA1999-NK5 "Daisy Chain" cable to connect two AMR Devices together to make an AMR Device Network ZA1909-DKL Fiber-Optic version of ZA1909-DK, ensures electrical isolation, 5-foot cable RS422 CONNECTION To connect AMR devices to a PC over long distances (up to 1km). RS422 networks require one Network Driver box per network and one Device Node Box per connected AMR device (or network of devices connected together via ZA1999-NK daisy-chain cables). Fiber-optically connected Network Driver Box #ZA5099-NTL requires 12VDC power. Connected AMR devices may be powered by the RS422 network depending on the sensor electrical requirements and distance between AMR device and Network Driver box - consult Clark for details. Connections between Network Driver Box and Device Node Box(es) is done with LD0032 multi-conductor cable. Model ZA5099-NTL Network Driver Box, fiber-optic connection to PC, includes converter for RS232 and 9-Pin Sub-D connector with 5-feet of fiber-optic cable to connect Driver Box to PC, use with ZA1012-NA1 power supply or other 12VDC/200mA supply ZA5099-AS Network Driver Box integrated into 9-Pin Sub-D PC connector plug ZA5099-NVL Device Node Box, includes 5-foot fiber-optic connector cable and plug to connect AMR device to Node Box, use only with ZA5099-NTL Network Driver Box ZA5099-NVB Device Node Box, includes 5-foot connector cable and plug to connect AMR device to Node Box, use with either ZA5099-NTL or ZA5099-AS Network Driver Box ZA1012-NA1 12VDC/200mA AC/DC Power Supply to power ZA5099-NTL Network Driver Box LD0032 6-Conductor Cable, specify length in meters TCP/IP CONNECTION Use ZA5099-NVE or ZA1945-DK to connect AMR device(s) to an Ethernet LAN via Cat-5 cable with RJ45 connector. IP Address for the AMR device(s) is assigned via software and programmed into the ZA5099-NVE/ZA1945-DK. It is possible to connect multiple AMR devices to one ZA5099-NVE/ZA1945-DK via ZA1999-NK daisy chain cable (between the AMR devices) and/or via ZA5099-NVB or ZA5099-NVL Device Node Box (connected directly to the ZA5099-NVE Ethernet box). Model ZA5099-NVE TCP/IP Ethernet Connection Box to for use with RS422 networked loggers, includes 5-feet of fiber-optic cable and plug to connect to AMR device ZA1945-DK TCP/IP Ethernet connection plug to connect AMR device or daisy- chained ALMEMOnetwork to LAN. Not for use with RS422 connected ALMEMO network. MODEM CONNECTION Connect remote AMR device(s) to a modem and dial them up from a PC. Allows for all programming functions and memory download capabilities, just as if device was connected locally. Can connect to single AMR device or AMR device network. Model ZA1709-MK Modem, specially-programmed to support AMR device communications AMR ALMEMO Network Connections RS232, RS422, TCP/IP, Modem ZA5099-NVE RS422 CONNECTOR www.clarksol.com Clark Solutions 10 Brent Drive Hudson, MA 01768 Tel. 978 / 568 3400 Fax 978 / 568 0060