You are on page 1of 1

B4K88-90904 2012 Hewlett-Packard Development Company, L.P.

DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
Manufacturer's Name: Hewlett-Packard Information
Technology R&D (Shanghai) Co., Ltd.
DoC#: BOISB-0901-05-rel.6.0
Manufacturer's Address: Building 6, No. 690 BiBo Road, ZhangJiang, Shanghai, China
declares, that the product
Product Name:
HP LaserJet Pro M1217nfw MFP Series
HP HotSpot LaserJet Pro M1218nfs MFP
Regulatory Model Number
2)
:
BOISB-0901-05
Product Options:
All
Accessories
4)
:
BOISEB-0906-00 (US-Fax Module LIU)

BOISEB-0906-01 (EU-Fax Module LIU)
SDGOB - 0892 (Wireless Module)
Toner Cartridges:
CE285A & CC388A
conforms to the following Product Specifications:
SAFETY:
IEC 60950-1:2005 / EN60950-1: 2006 +A11:2009 +A1:2010 +A12:2011
IEC 60825-1:2007 / EN 60825-1:2007 (Class 1 Laser/LED Product)
IEC 62479:2010 / EN 62479:2010
GB4943.1-2011

EMC :

CISPR22:2005 +A1 / EN55022:2006 +A1 - Class B
1)
EN 61000-3-2:2006 +A1:2009 +A2:2009
EN 61000-3-3:2008
EN 55024:1998 +A1 +A2
FCC Title 47 CFR, Part 15 Class B / ICES-003, Issue 4
GB9254-2008, GB17625.1-2003

Telecom
3)
:


Radio
4)
:
ES 203 021; FCC Title 47 CFR, Part 68
3)

EN 301 489-1:V1.8.1 / EN 301 489-17:V2.1.1
EN 300 328: V1.7.1
FCC Title 47 CFR, Part 15 Subpart C (Section 15.247) / IC: RSS-210
IEC 62311:2007 / EN62311:2008
Energy Use:
Regulation (EC) No. 1275/2008
ENERGY STAR Qualified Imaging Equipment Typical Electricity Consumption (TEC) Test Procedure
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 2004/108/EC and the Low Voltage Directive
2006/95/EC, the R&TTE Directive 1999/5/EC, the EuP Directive 2005/32/EC, and carries the CE-Marking accordingly.
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1. The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2. For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the
product name or the product number(s).
3. Telecom approvals and standards appropriate for the target countries/regions have been applied to this product, in addition to
those listed above.
4. This product uses an analog fax accessory module which Regulatory Model numbers are:
BOISB-0906-00 (US-LIU), or BOISB-0906-01 (EURO LIU), as needed to meet technical regulatory requirements for the
countries/regions this product will be sold.
Shanghai, China
February 2012
For Regulatory Topics only, contact:
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard Gmbh,
Department HQ-TRE / Standards Europe, Herrenberger Strae 140, D-71034 Bblingen (FAX: +49-7031-14-3143)
www.hp.com/go/certificates
USA Contact: Product Regulations Manager Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 1-650-857-1501

You might also like