You are on page 1of 11

M&AE 3050 October 3, 2008

Incompressible Potential Flow


D. A. Caughey
Sibley School of Mechanical & Aerospace Engineering
Cornell University
Ithaca, New York 14853-7501
These notes provide, as a supplement to our textbook [2], a description of two-dimensional, in-
compressible, potential ows, and the associated development of several fundamental aerodynamic
results.
1 Introduction
The analysis of high Reynolds number ows past streamlined bodies is greatly simplied by the fact
that viscous eects are generally important only within thin regions immediately adjacent to solid
boundaries. Outside these viscous boundary layers the ow is well approximated as inviscid. The
following sections will provide some background for analyzing these inviscid ows, at least in the
incompressible limit.
2 Incompressible Potential Flow
The vorticity is the curl of the velocity eld V
= V. (1)
It is not too dicult to show that the vorticity at any point in the ow corresponds to twice the
rotation rate of an innitesimal uid particle centered at that point. To demonstrate this for a two-
dimensional ow, we let u and v represent the x- and y- components of the velocity eld, relative
to the uid velocity at a given point. Then the instantaneous rates of rotation of two mutually-
orthogonal axes (taken, for convenience, to be parallel to the x- and y-axes, respectively), can be
computed as (see Fig. 1)

x
=
v
x
(2)
and

y
=
u
y
, (3)
whence the average rotation rate

is

=
1
2
_

x
+

y
_
=
1
2
_
v
x

u
y
_
. (4)
The quantity above within the parentheses is exactly the vorticity of this two-dimensional ow,
which can be written
1

z
=
v
x

u
y
. (5)
1
For a two-dimensional ow only one component of the vorticity vector is non-zero: the component normal to the
plane of the motion.
2 INCOMPRESSIBLE POTENTIAL FLOW 2
x
y

x
y
Figure 1: Relative velocity eld in the vicinity of a point, illustrating the relationship between
derivatives of relative velocity and instantaneous rotation rates of a pair of mutually perpendicular
axes.
A ow in which the vorticity is everywhere zero is said to be irrotational , and these irrotational
ows play an important role in aerodynamics.
Now, if viscous stresses are negligible there is no mechanism to introduce rotation of uid elements.
Thus, an initially irrotational ow must remain irrotational for all time.
2
This statement, called
Kelvins Theorem, is a fundamental basis of much of aerodynamic theory.
Any irrotational ow eld can be represented as the gradient of a potential function, so we can
represent the velocity as
V = , (6)
where the scalar function is called the velocity potential . It is clear from the vector identity
() = 0 (7)
that any potential eld is irrotational. Since an irrotational ow can be represented by a velocity
potential, the terms irrotational and potential are synonymous.
In Cartesian coordinates (x, y), Eq. (6) gives the components (u, v)
T
of the velocity vector as
u =

x
and v =

y
(8)
for ows in two dimensions.
For constant density ows, recall that the continuity equation requires
V = 0 , (9)
which, upon introducing the velocity potential, becomes
() =
2
= 0 . (10)
2
In addition to having negligibly small viscous stresses, we must also ensure that the pressure forces do not induce
rotation. This simply requires that the pressure forces acting on a uid element must act through the center of mass,
which is guaranteed if the density is constant. In the more general case of compressible ows, all that is required is that
surfaces of constant pressure also be surfaces of constant density; so compressible ows also satisfy this requirement
if they are well approximated as isentropic.
2 INCOMPRESSIBLE POTENTIAL FLOW 3
Thus, the velocity potential for an incompressible ow is seen to satisfy Laplaces Equation. In two
dimensions, the Cartesian-coordinate version of this can be written

x
2
+

2

y
2
= 0 . (11)
Two-dimensional, constant-density ows can also be described in terms of the stream function ,
which is dened to be constant along stream lines. That is, along a streamline we must have
d =

x
dx +

y
dy = 0 , (12)
which requires
dy
dx
_
=const.
=

y
=
v
u
. (13)
Thus, if we dene the stream function such that
u =

y
and v =

x
, (14)
the function will be constant along stream lines.
Since the stream function, as dened by Eqs. (14), can be used to dene rotational, as well as irrota-
tional ows, the condition of irrotationality supplies an additional constraint. Thus, for irrotational
ows, we must have
u
y

v
x
=

y
_

y
_

x
_

x
_
=

2

y
2
+

2

x
2
= 0 .
(15)
Thus, for irrotational ows the stream function is seen also to satisfy Laplaces equation.
Note the duality between the velocity potential and the stream function. The velocity potential
automatically satises irrotationality and continuity requires that it satisfy the Laplace equation.
On the other hand, the stream function automatically satises continuity, and it is irrotationality
that requires it to satisfy the Laplace equation.
For some of the elementary solutions to be discussed in the following sections, it is convenient to
describe the ow in the cylindrical coordinates dened by
r =
_
x
2
+ y
2
and = tan
1
_
y
x
_
, (16)
or
x = r cos and y = r sin . (17)
In terms of r and the components of the gradient of the velocity potential, corresponding to the
radial and circumferential components of velocity, are
v
r
=

r
and v

=
1
r

, (18)
and Laplaces equation for the velocity potential becomes

r
2
+
1
r

r
+
1
r
2

2
= 0 . (19)
2 INCOMPRESSIBLE POTENTIAL FLOW 4
V
R
n
Figure 2: Flow eld represented in cylindrical coordinates, matching the curvature of the streamline
at a point.
2.1 The Bernoulli Equation
Recall that, for inviscid, incompressible ow the Bernoulli equation requires that
p +
1
2
V
2
= p
T
, (20)
where p
T
is constant along a streamline. We show here that for irrotational ows the total pressure
p
T
is the same for all streamlines; i.e., the total pressure is the same constant throughout the ow.
If we dierentiate the Bernoulli equation in the direction n normal to a streamline we have
p
n
+ V
V
n
=
p
T
n
. (21)
At the same time, the force balance normal to the streamline requires
p
n
=
V
2
R
, (22)
where R is the radius of curvature of the streamline. Combining these two equations, we see that
the derivative of the total pressure normal to the streamline must be given by
p
T
n
=
V
2
R
+ V
V
n
= V
_
V
R
+
V
n
_
. (23)
But, in cylindrical coordinates the vorticity can be seen to be given by
=
V
R
+
V
n
, (24)
This quantity can be seen to be twice the average rate of rotation of two orthogonal axes (parallel
to the r- and -directions, respectively) of a polar coordinate system, as suggested by Fig. 2.
Thus, for an irrotational ow we must have
p
T
n
= 0 . (25)
Since the total pressure p
T
is constant along a streamline for inviscid, incompressible ows, and the
derivative of p
T
normal to streamlines must be zero for irrotational ows, Eq. (20) must hold, with
the same constant p
T
, everywhere in the ow in this case.
3 SOLUTIONS OF LAPLACES EQUATION 5
3 Solutions of Laplaces Equation
Since Laplaces equation is linear, solutions may be superimposed to produce new solutions. That
is, if
1
and
2
are both solutions, i.e.,

1
x
2
+

2

1
y
2
= 0 =

2

2
x
2
+

2

2
y
2
, (26)
then it is easy to show that
a
1
+ b
2
is also a solution of Laplaces equation for arbitrary values of the constants a and b. This principle
can be used to construct solutions of arbitrary complexity by superimposing simpler solutions.
3.1 Elementary Solutions
A number of simple solutions to Laplaces equation are useful for aerodynamic problems. We describe
some of these elementary solutions in the following sections.
3.1.1 Uniform stream
The velocity potential for a uniform stream having velocity magnitude U, inclined at the angle
relative to the x-axis, is given by
= U (xcos + y sin ) . (27)
It is easily seen that this function satises Laplaces equation, given by Eq. (11), and that the
corresponding Cartesian velocity components are given by
u =

x
= U cos and v =

y
= U sin. (28)
3.1.2 Source (or Sink)
The velocity potential for a source (or sink) of strength m located at the origin of the (r, ) coordinate
system is given by
=
m
2
lnr . (29)
It is easily veried by direct substitution that this function satises Laplaces equation.
The streamlines for this ow are radial lines from the origin, so the tangential component of velocity
v

is everywhere zero, and the radial component of velocity is given by


v
r
=

r
=
m
2r
. (30)
For this velocity eld, the volume rate of ow through any circular contour centered on the origin
is the same, and is given by
_
2
0
v
r
r d =
_
2
0
m
2r
r d = m. (31)
Thus, the continuity equation is satised at any nite value of the radius r, and m can be interpreted
as the rate at which uid volume is introduced by the singularity at r = 0.
3 SOLUTIONS OF LAPLACES EQUATION 6
3.1.3 Vortex
The streamlines for a source are seen to be radial lines from the origin, and lines of constant potential
are concentric circles. The ow having constant potential along radial lines and concentric circular
streamlines is called a vortex. The velocity potential for a vortex is
=

2
. (32)
For this ow the radial component of velocity v
r
is everywhere zero, and the tangential component
of velocity is given by
v

=
1
r

2r
. (33)
The parameter appearing in the denition of the velocity potential for a vortex is identied with
the circulation associated with the vortex. The circulation is dened as (minus) the line integral of
the velocity around a closed contour
3

_
V ds . (34)
Just as the volume rate of ow for a source is constant when evaluated on a circular contour of any
radius, the circulation associated with a vortex is the same when evaluated on a circle of any radius
r centered on the origin

_
2
0
v

r d =
_
2
0

2r
r d = . (35)
This is true so long as circles of successively larger radius do not enclose any new vortices. In fact,
it can be shown using Stokes Theorem that the circulation is the same, independent of the shape
of the contour, and is equal to the net strength of the vortices enclosed by the contour [1]. Thus,
just as a source can be identied as a source of uid volume, a vortex can be identied as a source
of circulation.
3.2 Superposition the Doublet
As described in the introduction to this section, more complicated ows can be constructed by
superposition of elementary ows. A doublet can be constructed by superposing a source of strength
m at x = a and a source (sink) of strength m at x = a, and taking the limit as a 0 (while
increasing the source and sink strengths so that the product am remains constant). A sketch of the
situation is provided for nite separation a in Fig. 3(a).
The velocity potential for this ow is then given by

h
= lim
a0
_
m
2r
ln
_
(x + a)
2
+ y
2

m
2r
ln
_
(x a)
2
+ y
2
_
. (36)
Using the fact that
lim
0
[ln(1 + )] =

2
2
+

3
3
+
the velocity potential for the doublet can be expressed as

h
=
am

x
r
2
=
h
x
r
2
=
h
cos
r
, (37)
3
The minus sign is introduced here simply for convenience, so that positive lift will correspond to positive circulation
when the free stream is in the positive x direction.
4 FLOW PAST A CIRCLE 7
x
y
a a
0.25
0.5
0.75
0.25
0.5
0.75
1
3 2 1 0 1 2 3
2
1.5
1
0.5
0
0.5
1
1.5
2
(a) (b)
Figure 3: Superposition of source and sink to form a doublet. (a) Schematic of source at x = a
and sink at x = +a, separated by a nite distance 2a. (b) Selected streamlines for a (horizontal)
doublet of unit strength
h
= 1.0; value of stream function is indicated for selected streamlines.
Flow along x-axis is from right to left.
where we have dened the doublet strength
h
= am/.
Following a similar procedure, it can be shown that the velocity potential for a doublet in which a
source located at y = a and a sink of equal, but opposite, strength located at y = +a, in the limit
as a 0 while keeping the product am constant is given by

v
=
am

y
r
2
=
v
y
r
2
=
v
sin
r
, (38)
where the doublet strength is again
v
= am/. The use of the subscripts ()
h
in Eq. (37) and
()
v
in Eq. (38) is meant to suggest that the limiting process is occurring horizontally or vertically,
respectively. The streamline pattern for a (horizontal) doublet of unit strength is indicated in
Fig. 3(b).
4 Flow past a Circle
The potential ow past a circle can be represented by superposition of a uniform stream parallel to
the x-axis and a (horizontal) doublet. Thus, we let
= Ux +
x
x
2
+ y
2
,
or, in polar coordinates,
= Ur cos +
cos
r
= cos
_
Ur +

r
_
. (39)
The radial and tangential components of the velocity are then given by
v
r
=

r
= cos
_
U

r
2
_
,
v

=
1
r

= sin
_
Ur +

r
_
.
(40)
The radial component of velocity is seen to be identically zero for all values of when r =
_
/U.
Thus, if we choose = U, the circle of radius r = R = 1 will be a streamline i.e., this combination
4 FLOW PAST A CIRCLE 8
3 2 1 0 1 2 3
2
1.5
1
0.5
0
0.5
1
1.5
2
0.8
0
3
3 2 1 0 1 2 3
2
1.5
1
0.5
0
0.5
1
1.5
2
(a) (b)
Figure 4: Potential ow past a circle. (a) Selected streamlines and (b) Lines of constant pressure
coecient; selected contours are labeled with the pressure coecient value. Note that pressures are
symmetric about both x- and y- axes, so the net aerodynamic force is zero.
of the velocity potentials for a doublet and a uniform stream will represent the ow past a circle of
unit radius. The streamlines and lines of constant pressure for such a ow are illustrated in Fig. 4.
On the surface of the circle, the tangential component of velocity is given by
v

= 2U sin . (41)
The velocity is zero on the circle at the stagnation points = 0 and = , and takes its maximum
value V = 2U at the shoulders = . The minimum pressure also occurs at the shoulders = .
Contours of constant pressure coecient are displayed in Fig. 4(b). The pressure coecient is dened
as
C
p
=
p p

1
2
U
2
, (42)
where p

is the pressure in the free stream, where the velocity is equal to U. For constant-density
potential ows, the Bernoulli equation can be used to express the pressure coecient as
C
p
= 1
v
2
r
+ v
2

U
2
. (43)
For this ow the net lift and drag d forces acting on the circle are zero, by symmetry. The
symmetry about the x-axis can be broken by adding a vortex to the ow. Since the vortex has
circular streamlines, adding the vortex will not alter the fact that the circle of radius r = 1 remains
a streamline. The velocity potential for the ow past the unit circle with circulation is therefore
given by
= U cos
_
r +
1
r
_

2
, (44)
and the velocity components are given by
v
r
= U cos
_
1
1
r
2
_
v

= U sin
_
1 +
1
r
2
_

2r
.
(45)
The streamlines and contours of constant pressure for this ow, with = U, are illustrated in
Fig. 5.
4 FLOW PAST A CIRCLE 9
3 2 1 0 1 2 3
2
1.5
1
0.5
0
0.5
1
1.5
2
1
5
0
0
3 2 1 0 1 2 3
2
1.5
1
0.5
0
0.5
1
1.5
2
(a) (b)
Figure 5: Potential ow past a unit circle with circulation. In this illustration, the doublet and
vortex strengths are chosen such that = U and = U. (a) Selected streamlines and (b) Lines of
constant pressure coecient; selected contours are labeled with the pressure coecient value. Note
that pressures remain symmetric about the y- axis, so the drag is still zero, but the symmetry is
broken about the x-axis, resulting in a net lift force.
On the circle r = 1 the pressure is given by
p = p
T

1
2
v
2

= p
T

2
_
4U
2
sin
2
+ 2
U

sin +

2
4
2
_
.
(46)
The net lift force (i.e., the force in the y-direction) on the circle can then be calculated by integrating
the pressure force around the surface of the circle; this is found to be
4
=
_
2
0
p sin d =
U

_
2
0
sin
2
d = U, (47)
since
_
2
0
sin
2
d = . (48)
Similarly, the drag force d acting on the circle is
d =
_
2
0
p cos d = 0 . (49)
The result shown in Eqs. (47) and (49) is, in fact, a general result for potential ow past two-
dimensional bodies: namely that there is no drag and the lift is proportional to the net circulation
generated by the body (with the constant of proportionality equal to the product of the free stream
velocity and the uid density). A proof of this result, which is known as the Kutta-Joukowsky
Theorem, is sketched in the following section.
4
Only the middle term in square brackets of Eq. (46) contributes to the integral, since the integral of any odd
power of the sine function over the range from 0 to 2 is identically zero.
5 THE KUTTA-JOUKOWSKY THEOREM 10
5 The Kutta-Joukowsky Theorem
The ow past any closed, two-dimensional body can be represented by the superposition of a uniform
stream
= Ux,
a sum of sources and sinks
=

i
m
i
2
ln
_
(x x
i
)
2
+ (y y
i
)
2
,
where

i
m
i
= 0 since the body is closed; and a sum of point vortices
=

i
2
tan
1
_
y y
i
x x
i
_
.
At large distances from the body, the contributions to the velocity potential due to the sources and
sinks must approach that of eective doublets, since the net source strength is zero; and all the
point vortices can be represented as a single vortex located at the origin (plus additional doublet
contributions
5
). Thus, at large distances from the body, the velocity potential can be represented
as
= Ur cos +
h
cos
r
+
v
sin
r

2
, (50)
where =

i

i
is the net circulation produced by the ow past the body and
h
and
v
are the
net doublet strengths required to represent the displacements of the sources and vortices from the
origin. Thus, far from the body the radial and tangential components of the velocity are given by
v
r
=

r
= U cos
h
cos
r
2

v
sin
r
2
,
v

=
1
r

= U sin
h
sin
r
2
+
v
cos
r
2

2r
.
(51)
Note that the doublet contributions to the velocities decay as 1/r
2
, while the contribution from the
vortex decays only as 1/r. Thus, if the vortex strength is non-zero, the doublet contributions to
velocities far from the body will always be small compared to that due to the vortex.
Now, we can use this far-eld behavior of the velocities to determine the net aerodynamic force
acting on a body in two-dimensional potential ow using the Momentum Theorem applied to a
control volume consisting of the uid between the body and a circular contour of radius R in the
far eld, taking the limit as R . The y-component of the sum of the forces acting on the uid
in this control volume can be written

F
y
=
_
2
0
p sin Rd , (52)
where is the lift force on the body.
6
The Bernoulli equation can be used to express the pressure
on the far-eld contour as
p = p
T

2
_
U
2
+
U

sin
R
+

2
4
2
1
R
2
_
. (53)
Thus, the net force acting on the uid in the control volume is
7

F
y
= +
U
2
_
2
0
sin
2

R
Rd = +
U
2
. (54)
5
A doublet can also be formed by the limiting process in which two vortices of equal, but opposite, strength are
moved together, keeping the product of their strength and spacing constant; see Exercise 2
6
Note that the force exerted by the body on the uid is minus the force exerted by the uid on the body.
7
Again, only the middle term in brackets in Eq. (53) contributes to the integral
REFERENCES 11
According to the Momentum Theorem, this force must be equal to the net rate at which y-momentum
is leaving the control volume, which is
_
2
0
v
y
(V n)Rd , (55)
where (far from the body)
v
y
= v
r
sin + v

cos =

2
cos
r
, (56)
and
V n = v
r
= U cos . (57)
Thus, the net rate at which y-momentum is leaving the control volume is
_
2
0
v
y
(V n)Rd =
_
2
0

U
2
cos
2
d =
U
2
. (58)
Thus, equating Eqs. (54) and (58) gives
= U (59)
for the net force acting on the body in the direction normal to the free stream. A similar anal-
ysis shows that the x-component of force i.e., the drag d is identically zero. Thus, we have
demonstrated the Kutta-Joukowsky Theorem for the potential ow past a general, two-dimensional
body.
References
[1] John J. Bertin, Aerodynamics for Engineers, Fourth Edition, Prentice-Hall, Upper Saddle
River, New Jersey, 2002.
[2] Richard S. Shevell, Fundamentals of Flight, Second Edition, Prentice-Hall, Upper Saddle
River, New Jersey, 1989.
6 Exercises
1. Show that, to within a constant, the stream function for a vortex is the same as the velocity
potential for a source, and vice versa.
2. Show that the doublet formed superposition of a vortex of strength located at y = +a and a
vortex of strength located at y = a, in the limit as a 0 while keeping the product a
constant, is the same as the horizontal doublet of Eq. (37). What arrangement of vortices
would produce, in the proper limit, a ow equivalent to the vertical doublet of Eq. (38)?
3. For a critical value of the circulation , the two stagnation points in the circulatory ow past
a circle will merge into a single point on the circle (at = /2). What is the value of
circulation for which this happens? Sketch the streamlines for values of circulation greater
than this critical value.

You might also like