You are on page 1of 27

TER-100

Gracias
por la compra de este producto Steren.
Este manual contiene todas las funciones de operacin y solucin de problemas
necesarias para instalar y operar su nuevo Termmetro
digital para interiores y exteriores Steren.
Por favor revise esta gua
completamente para estar seguro de instalar y poder operar
apropiadamente este producto.
Para apoyo, compras y todo lo nuevo que tiene Steren, visite nuestro sitio Web en:
www.steren.com
Termmetro digital para interiores y exteriores
CONTENIDO
Caractersticas 6
Controles 7
Cargar la batera 8
Activacin de alerta 9
Temperatura mxima y mnima 10
Reiniciar ajustes de temperatura 11
Especifcaciones 11
6
Su nuevo termmetro digital cuenta con 2 pantallas para poder visualizar 2 temperaturas
diferentes: la temperatura interna y la temperatura externa. Las temperaturas se pueden
ajustar, una vez realizado el ajuste, el termmetro emitir una alarma audible si la temperatura
detectada es mayor a la fjada en la pantalla inferior o si es menor a la fjada en la pantalla superior.
IMPORTANTE
No exponga el equipo a temperaturas extremas.
No use ni almacene este equipo en lugares donde existan goteras o salpicaduras de agua.
Puede causar un mal funcionamiento.
Siempre utilice un pao suave limpio y seco para limpiar el equipo.
Caractersticas
7
1.- Pantalla de LCD.
2.- Grados.
3.- Alerta / Ajuste (Alert / Set).
4.- Mximo / Mnimo (Max / MIn).
5.- Reinicio (Reset).
6.- Sensor externo.
7.- Compartimiento de batera.
Controles
1
C/F
ALERT/SET
MAX/MIN RESET

3
4
5
6
VISTA FRONTAL VISTA TRASERA
7
8
Cargar la batera
Para comenzar a utilizar su nuevo termmetro digital, siga estas instrucciones:
1.- Inserte una batera AAA en el compartimiento de bateras poniendo atencin a la
polaridad (Fig. 1).
2.- Coloque el termmetro en la posicin deseada (en
un escritorio o colgado en la pared) (Fig. 2).
3.- Coloque el sensor en una zona exterior.
4. - La medi ci n
comenzar. En la parte
superior de la pantalla de LCD se mostrar la temperatura
interna. En la parte inferior se desplegar la temperatura externa.
5.- Si desea cambiar el modo de visualizacin de la
temperatura, ya sea en C o F, presione el botn de Grados.
1
2
9
Mediante esta funcin puede establecer valores mnimos y mximos de temperatura y una
vez que se sobrepasen esos lmites, una alarma audible comenzar a sonar.
1.- Presione el botn de Alerta / Ajuste (Alert / Set) durante un segundo.
2.- La temperatura de la pantalla inferior comenzar a parpadear. Utilice el botn de Grados
para cambiar el valor mximo.
3.- Presione el botn de Alerta / Ajuste (Alert / Set) una vez ms, la temperatura de la
pantalla superior comenzar a parpadear. Utilice el botn de Grados para cambiar el valor
mnimo de la temperatura.
4.- Presione el botn de Alerta/ Ajuste (Alert / Set) para guardar los cambios.
5.- La alerta sonar si la temperatura excede el nivel mximo o es menor al nivel mnimo de
la temperatura programada.
Si desea activar la alerta presione el botn de Alerta /
Ajuste (Alert / Set) hasta que aparezca el mensaje Ale On
en pantalla. Si desea desactivar la alarma, presione
nuevamente el botn hasta que aparezca el mensaje Ale Off.
Activacin de alerta
C
/
F
ALERT/SET
M
A
10
Temperatura mxima y mnima
Mediante esta funcin podr visualizar la ltima temperatura mxima y/o mnima guardada
en memoria.
1.- Presione el botn de Mximo (Max/Min) una vez para
visualizar la ltima temperatura mxima guardada en la
memoria del termmetro. En pantalla aparecer el mensaje
MAX y la ltima medicin de temperatura mxima.
2.- Presione el botn de Mnimo (Max/Min) para visualizar la ltima temperatura mnima
guardada en memoria. El mensaje MIN y la ltima temperatura mnima interna y externa
aparecer en la pantalla de LCD.
3.- Presione una vez ms el botn de Mximo / Mnimo (Max / Min) para regresar al modo
normal de visualizacin.
ALERT/SET
M
AX/M
IN
RESET
11
Si desea borrar la informacin guardada en memoria acerca de los valores mximos y
mnimos de temperatura as como los valores de Alerta, presione el botn de Reinicio
(Reset). Toda la informacin ser borrada y podr volver a realizar los ajustes necesarios
siguiendo las instrucciones anteriormente explicadas.
Reiniciar ajustes de temperatura
Alimentacin: 1,5 V - - - (1 x AAA)
Rango de temperatura Interna: -10 50C
Rango de temperatura externa: -50 70C
Resolucin de temperatura: 0,1
Exactitud de medicin: + 1,5C
Longitud del cable del sensor: 1,8m
Dimensiones: 110 x 70 x 20mm
Pantalla: 30 x 40mm
Altura de los dgitos: 12mm
El diseo del producto y las especifcaciones pueden cambiar sin previo aviso.
Especifcaciones
PLIZA DE GARANTA
Esta pliza garantiza el producto por el trmino de un ao en todas sus partes y mano de obra, contra cualquier defecto
de fabricacin y funcionamiento, a partir de la fecha de entrega.
CONDICIONES
1.- Para hacer efectiva la garanta, presente sta pliza y el producto, en donde fue adquirido o en Electrnica Steren
S.A. de C.V.
2.- Electrnica Steren S.A de C.V. se compromete a reparar el producto en caso de estar defectuoso sin ningn cargo al
consumidor. Los gastos de transportacin sern cubiertos por el proveedor.
3.- El tiempo de reparacin en ningn caso ser mayor a 30 das, contados a partir de la recepcin del producto en
cualquiera de los sitios donde pueda hacerse efectiva la garanta.
4.- El lugar donde puede adquirir partes, componentes, consumibles y accesorios, as como hacer vlida esta garanta es
en cualquiera de las direcciones mencionadas posteriormente.
ESTA PLIZA NO SE HARA EFECTIVA EN LOS SIGUIENTES CASOS:
1.- Cuando el producto ha sido utilizado en condiciones distintas a las normales.
2.- Cuando el producto no ha sido operado de acuerdo con el instructivo de uso.
3.- Cuando el producto ha sido alterado o reparado por personal no autorizado por Electrnica Steren S.A. de C.V.
El consumidor podr solicitar que se haga efectiva la garanta ante la propia casa comercial donde adquiri el producto.
Si la presente garanta se extraviara, el consumidor puede recurrir a su proveedor para que le expida otra pliza de
garanta, previa presentacin de la nota de compra o factura respectiva.
DATOS DEL DISTRIBUIDOR
Nombre del Distribuidor
Nmero de serie
Fecha de entrega
Producto: Termmetro digital para interiores y exteriores
Modelo: TER-100
Marca: Steren
ELECTRONICA STEREN S.A. DE C.V.
Camarones 112, Obrero Popular, 02840, Mxico, D.F.
RFC: EST850628-K51
STEREN PRODUCTO EMPACADO S.A. DE C.V.
Bilogo MaximIno Martnez No. 3408 Int. 3 y 4, San
Salvador Xochimanca, Mxico, D.F. 02870,
RFC: SPE941215H43
ELECTRONICA STEREN DEL CENTRO, S.A. DE C.V.
Rep. del Salvador 20 A y B, Centro, 06000, Mxico.
D.F. RFC: ESC9610259N4
ELECTRONICA STEREN DE GUADALAJARA, S.A.
Lpez Cotilla No. 51, Centro, 44100, Guadalajara, Jal.
RFC: ESG810511HT6
ELECTRONICA STEREN DE MONTERREY, S.A.
Coln 130 Pte., Centro, 64000, Monterrey, N.L. RFC:
ESM830202MF8
ELECTRONICA STEREN DE TIJUANA, S.A. de C.V.
Calle 2a, Jurez 7636, Centro, 22000, Tijuana, B.C.N.
RFC: EST980909NU5
En caso de que su producto presente alguna falla, acuda al centro de distribucin ms
cercano a su domicilio y en caso de tener alguna duda o pregunta por favor llame a
nuestro Centro de Atencin a Clientes, en donde con gusto le atenderemos en todo lo
relacionado con su producto Steren.
Centro de Atencin a Clientes
01 800 500 9000
Thank You
on purchasing your new Steren product.
This manual includes all the feature operations and troubleshooting necessary to install
and operate your new Sterent Digital indoor & outdoor thermometer. Please review this
manual thoroughly to ensure proper installation and operation of this product. For support,
shopping, and everything new at Steren, visit our website:
www.steren.com
TER-100
Digital indoor & outdoor thermometer
CONTENT
Highlights 6
Controls 7
Instructions 8
How to activate the alarm 9
Maximum and minimum temperature 10
Reset 11
Specifcations 11
6
Your new digital thermometer has 1 screen divided in two, in order to visualize 2 different
temperatures: the internal temperature and the external temperature. The external and
internal temperatures can be adjusted, once you made it, the thermometer will emits an
audible alarm if the detected temperature is higher than fxed on the bottom screen or will
sound if the temperature is less than fxed temperature in the superior screen.
IMPORTANT
Do not expose to extreme temperatures.
Do not use or store the equipment near wet places. May cause malfunction or shock hazard.
Clean only with a soft, dry cloth.
Highlights
7
1.- LCD screen.
2.- Grades.
3.- Alert.
4.- Maximum / Minimum (Max/Min).
5.- Reset.
6.- External sensor.
7.- Battery compartment.
Controls
1
C/F
ALERT/SET
MAX/MIN RESET

3
4
5
6
FRONT VIEW REAR VIEW
7
8
Instructions
To start to use your new digital thermometer, follow these steps:
1.- Place a new battery type AAA into the battery compartment paying attention to polarity
(Fig. 1).
2.- You can put the thermometer at your desk or hang
it up in the wall (Fig. 2).
3.- Place the external sensor in an outside area.
4.- Now your thermometer
starts to measure the temperature. On the top screen appears the
internal temperature measure. On the bottom screen you can see
the external temperature.
5.- If you want to change from C Celsius to F Fahrenheit press
Grades button.
1
2
9
Use this function to set minimum temperature value and maximum temperature value, in
order to obtain an audible alert when the temperature surpass this limits.
1.- Press and hold Alert button for one second.
2.- The numbers on the inferior screen starts to blink. Press the Grades button to set the
maximum temperature value.
3.- Press Alert button once again, the numbers on the bottom screen starts to blink. Press
Grades button constantly to change the minimum temperature value.
4.- Press the Alert button once to store the changes.
5.- When the temperature exceeds the maximum level
If you want to activate the alert, press Alert button
until the message Ale On appears on screen. If you want
to deactivate the alarm, press Alert button once again until
the message Ale Off appears on the screen.
How to activate the alarm
C
/
F
ALERT/SET
M
A
10
Maximum and minimum temperature
Use this function to visualize the stored measure of maximum and minimum temperature.
1.- Press the Max button once to visualize the last stored
maximum temperature value. On screen appears the word
MAX and the last measure of the maximum temperature.
2.- Press Min button once to visualize the last stored
minimum temperature value. The message MIN appears
on the screen and the last measure of the minimum temperature.
3.- Press Max/Min button once again to back to normal display.
ALERT/SET
M
AX/M
IN
RESET
11
If you want to delete all the stored information about maximum and minimum temperature
values and the Alert settings, press Reset button.
Whole information will be deleted and you can re-make the required settings following the
instructions mentioned before.
Reset
Input: 1.5 V - - - (1 x AAA)
Internal temperature range: 14- 122F
External temperature range: 58 158F
Temperature resolution: 0.1
Temperature accuracy: 1.8F
Sensor cable length: 6ft
Dimensions: 4.3 x 2.75 x 0.78in
Display: 1.18 x 1.57in
Digit height: 0.5in
Product design and specifcations are subject to change, without notice.
Specifcations
12
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and
materials to the original purchaser for one year from the date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice, product box or package, and
product, must be presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accessories to customer, as well as
warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries,
failure to follow enclosed instructions, improper repair by unauthorized personnel, improper
safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
Product: Digital indoor & outdoor thermometer
Part number: TER-100
Brand: Steren
Este instructivo puede mejorar con tu ayuda,
llmanos a:
Help us to improve this instruction manual,
call us to:
www.steren.com
01800 500 9000
Centro de Servicio a Clientes
Customer Service Center

You might also like