You are on page 1of 3

FLEXIBLE CEMENTATIOUS WATERPROOF COATING

GENERAL
Flexi Coat is highly flexible, thixotropic two pack material of high solids polymer with modified cement bound mineral
material. Flexi Coat is paint able and has high adhesion with concrete/masonry surfaces. The coating of Flexi Coat
possesses high flexural and tensile strength and thus elastic in nature.

TECHNICAL DATA

Appearance Liquid /white in colour, Powder /Grey in colour.
Tensile Strength 17kg/sq.cm
Elongation 200 %
Drying Time (Initial) Less than 4 hrs
Complete 48-72 hrs depend upon ambient temp.and substrate.
Resistance to Water Pressure Up to 7 bar
Crack Bridging Capacity 1.2mm at 1mm thickness



Fields of Application:-
Flexi Coat is used for:
Waterproofing of terrace, roof lawn, parking decks, ramp.
Sealing of Strained basements wall.
Waterproofing systems for water tanks.
Waterproofing system for high water heads.
Sealing and protection of bridge decks, tunnels, cooling towers, balconies.
As anti-carbonation coating in new and repair protection system.

Surface preparation:
Clean thee base thoroughly by wire brush and remove the loose material, dust, grease, oil or other foreign particles.
Cracks must be opened by means of cutter/ manually. Clean the surface then by water to remove all dust and
substrate the base by water and dampen the surface, remove the excess water. Fill the crack/honey comb with crack
bound/or repair mortar composed of repair bond to be filled directly to the sound groove/honey comb substrate.

Features / Advantages

High Water Resistance
Breathable membrane
No water curing required
Excellent adhesion to Brick work,
concrete/masonary,other cement bound surfaces,
Seamless, non-toxic
Easy to apply
For internal as well as External purpose
KANFLEX

Mixing & application procedure:-
Flexi coat consists of a liquid component and a powder component. Take a clean container add it flexi coat liquid add
to it water and then slowly start adding flexi coat powder component in the ratios given below. Mix thoroughly for 3-4
min and do not mix materials that can be used in 15 min.Flexi coat is applied in two coats at 1.5mm thickness. For
hair line cracks prepare the surface as described above and then apply two coats of flexi coat over with a width of 6-8
inch. The mixed material can be applied by trowel or brush before application the surface should be moist not wet
remove excess of water if any. The interval between two coats 3-4 hrs.

Recommended mixing ratios for various applications:

TYPE OF APPLICATION MIXING RATIOS CONSUMPTION
Primer Coat
(Must in any application)
1

ST COAT
1 KG Flexi coat liquid:
2 KG water
6 kg Flexi coat powder
Approx.90 sq.ft.per coat
Waterproofing of new structure 2

ND
coat
1 KG Flexi coat liquid:
1 KG water
6 kg Flexi coat powder
Approx.60 sq.ft.per coat
Waterproofing of new structure 2

ND
coat
1 KG Flexi coat liquid:
1 KG water
6 kg Flexi coat powder
Approx.45-50 sq.ft.per
coat
Crack Resistance Coating over
Cracks.
1 KG Flexi coat liquid
1 kg Flexi coat powder



SHELF LIFE AND STORAGE:
To be stored in original packed container, protected from direct sunlight & frost. Flexi coat is non toxic & non
flammable.

PAC K I NG

1 kg, 5 kg, 10 kg, 20 kg & 50 kg

Shelf Life & Storage

Shelf life is 12 months from the date of manufacturing. Store in a cool & dry place in unopened condition
(Prevent from direct sunlight).

Health and Safety
Avoid prolonged contact with skin. If Repairbond comes into contact with eyes, flush with copious volumes of cold water and
obtain medical attention.
FixiTERPROOFING PRODUCTS
DISCLAIMER
The Companys Products are sold subject to the Companys Standard Terms and Conditions of Sale. Products are warranted against defective materials and
workmanship. The Company makes every effort to ensure that all the information, recommendations or the specifications provided by it are accurate and true.
However as the Company has no control over the conditions of use; it cannot accept any liability, either directly or indirectly regarding the usage of its products.
Product specifications are subject to change without prior intimation to users as the products are being continuously upgraded.

Kangaru Polymers Pvt ltd
Mfg of Sealants, Waterproofing chemicals & Construction Chemicals
J-135, MIDC, BHOSARI, PUNE -411026
TELEFAX-+91 20 27110468
Website -www.kangarupolymers.com, E-mail kangarupolymers@gmail.com

You might also like