You are on page 1of 109

DEF

MFL

GMFL

SMFL

XYZ

LGT

Pipeline Inspection Report

Company Name

Gas Authority of India Ltd.

Project Name

IP-2, Sherpura to SV-6, Halol


Pipe Size

1219.2 mm

Inspection Date(s)
May 25, 2011

Report Date(s)
Aug 4, 2011

TDW Regional Office


TDW India Ltd.

2011

K360

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Executive Summary - Deformation


RUN INFORMATION

IP-2, Sherpura to SV-6, Halol

Mr Ranveer Singh

1219.2 mm Air - compressed


Launcher

Receiver

IP-2, Sherpura

SV-6, Halol

5/18/2011 12:00:00 AM

5/18/2011 12:00:00 AM

GPS - LAT:

22.66249

22.48802

GPS - LONG:

73.64448

73.49245

Location:
Date/Time:
Stationing:

Duration of run - Hours: 11.34


Pipeline Length: 24,353 m
On-site Representative: Vishal Patel

Average Velocity:
Maximum Velocity:
Data Analyst:

0.58 m/sec

Tool Tracking By: n/a

20.53 m/sec
Liam Ferguson
INSPECTION FINDINGS

Deformations Detected: 0

Ovalities Detected: 0

Expansions Detected: 0

No dents found meeting minimum report parameters

Heavy Weld Detected: 0

Valves Detected:

No dents found meeting minimum report parameters

INSPECTION DETAILS

A total of 0 deformations were detected on the inspection survey.


Inspection data was obtained for the full length (24353 meters / 24.35km) of the survey. The quality of the inspection data is
satisfactory for a comprehensive assessment of this pipeline segment.

Page 1 of 1

Executive Summary - Deformation

Gas Authority of India Ltd.

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Deformation Summary
DEFINITIONS

Dents may affect the integrity of the pipeline and are considered harmful. A dent with associated metal loss is potentially more significant than a dent alone.

ID#
Distance
Depth
Orientation
Sub Type
Min X Sec Dia
Description
On Weld
Metal Loss
Above-Ground
References
Distance from Defect

Each Deformation is automatically assigned a number in the software. This number is provided to assist the user of PIGTRAP software to more
easily find any given defect.
Given in either feet or meters, based on contractual agreements, this is the absolute distance measured by the tool from launch.
Depth of the indication in inches or mm.
The orientation of the deformation indication in degrees (top of pipe = 0) and clock position, as viewed facing downstream.
The sub type of deformation if other than dent (i.e. Heavy Weld, Ovality, Buckle, Expansion).
The minimum measured Cross-Section (ID) measured within the scope of the deformation.
Text describing a deformation in greater detail. Any special conditions are noted.
Determination whether the indication crosses a girth (or seam) weld.
"Yes" is listed if there is any metal loss associated with a dent.
The name of the closest upstream and downstream references, usually either an AGM or a valve.
The distance to the upstream and downstream reference listed in the previous column. Used for locating defects in the field.

Deformation Summary

The Deformation Summary Report lists all the deformations and dents detected during the inspection, sorted by depth of deformation (descending)

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Deformation Summary
Sub Type

Min
X Sec
Dia

Description

On Metal
Weld Loss

Above-Ground References

Distance
from
Defect

No Dents have been detected on this pipeline inspection

Page 2 of 2

Deformation Summary

ID#

Distance Depth Depth Orientation


(m)
(mm)
% (Deg / OClock)

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Charts
CHARTS

The following charts are utilized in this report:

Velocity - DEF
Dent Depth
Dent Orientation

Displays the speed of the tool relative to distance during the inspection. The specified contractual velocity of the inspection tool is 0 feet per
second. If the tool exceeds this speed, the data collected by the tool may be degraded.
This chart highlights the predicted depths of deformations in inches or mm compared to distance.
The distance from launch is plotted against the orientation of the deformation indications. Orientation is based on 360 in a circle, with 0or
360 marking the top of the pipe (180 the bottom).

Charts

The Pipeline Summary report provides an overview of the pipeline condition.

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Velocity Graph - DEF


Velocity Graph - DEF

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Dent Depth Graph


Dent Depth Graph

No dents found meeting minimum report parameters.

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Dent Orientation Graph

No dents found meeting minimum report parameters.

4:00 OClock

Dent Orientation Graph

8:00 OClock

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Locations Summary
DEFINITIONS

For example, a metal loss area could be referenced as being 200 feet down stream from a valve. Not all locations can be easily found from above ground.
Some locations might not be useful if they are not above ground.

ID#
Time
Distance
Joint #

Each location is automatically assigned a number in the software. This number is provided to assist the user of PIGTRAP software to
more easily find any given defect.
A reference time from the inspection tool. May also be used to locate features in the PIGTRAP software.
Given in either feet or meters, based on contractual agreements, this is the absolute distance measured by the tool from launch.
This unique number identifies the girth weld number.

U/S Weld Dist.

The distance to the upstream (U/S) weld (in feet or meters).

D/S Weld Dist.

The distance to the downstream (D/S) weld (in feet or meters).

Description
Latitude
Longitude

Describes the location in greater detail. Possible entries include valves, flanges, fittings, tees, markers, etc.
This shows the north/south position of the Location as supplied by the customer or recorded by an AGM box. For XYZ mapping runs,
these values are the supplied survey points or were calculated by the tool.
This shows the east/west position of the Location as supplied by the customer or recorded by an AGM box. For XYZ mapping runs,
these values are the supplied survey points or were calculated by the tool.

Zeroes in Latitude and Longitude mean that no data was supplied by the customer. Calculated or estimated values can be viewed in the Pipe Listing report.

Locations Summary

A location is a feature in the pipeline that can be used to correlate the inspection tool data to above ground references. Common location features include
valves, fittings, flanges, tees, casings, repairs and aboveground markers (AGMs).

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Locations Summary
Time

Dist (m)

Joint #

U/S Weld
Dist.

D/S Weld
Dist.

Description

Latitude

Longitude

10000000

34,069.78

0.0

110

0.3

0.2

Valve (Launcher), IP-2 Sherpura

22.66249

73.64448

10000001

35,557.54

585.7

600

2.8

5.5

Bend left

0.00000

0.00000

10000002

36,209.47

874.9

860

2.0

3.8

Bend right

0.00000

0.00000

10000003

55,569.75

13,449.4

11,570

1.3

4.5

Bend right

0.00000

0.00000

10000004

56,033.85

13,721.3

11,810

2.2

5.9

Bend right

0.00000

0.00000

10000005

74,899.81

24,353.7

20,890

5.1

5.4

Valve (Receiver), SV-6 Halol

22.48802

73.49245

Type

Number

Bend

Casing

Flange

Fitting

Marker

Repair

Tee

Valve

Pipe Support

Page 2 of 2

Locations Summary

ID#

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Nominal Wall Thickness


DEFINITIONS

ID#

Each wall thickness change ID is automatically assigned a number in the software. This number is provided to assist the user of
PIGTRAP software to more easily find any given defect.

Distance

Given in either feet or meters, based on contractual agreements, this is the absolute distance measured by the tool from launch.

Wall Thickness
Pipetype

The predicted wall thickness in inches or millimeters.


Type of pipe construction. Electric Resistance Weld (ERW), Seamless (SMLS), Lap Weld (LW), etc.

Yield Strength
(SMYS)

Specified Minimum Yield Strength A required strength level that measured yield stress of a pipe material must exceed, which is a
function of pipe grade. The measured yield stress is the tensile stress required to produce a total elongation of 0.5 percent of a
gage length as determined by an extensometer during a tensile test.

Safety Factor

(or design factor) Typically 0.72 per ASME B31.4 In setting the safety factor, due consideration has been given to and allowances
made for the manufacturing tolerance and maximum allowable depth of imperfections provided for in the specifications.

Length of Segment

The length of the pipe for the specified wall thickness, measured in feet or meters.

Nominal Wall Thickness

The following list provides locations along the pipeline where changes in wall thickness or pipe type occur. While the TDW inspection tool can easily detect
changes in wall thickness, it cannot take direct thickness measurements. Therefore, where wall thicknesses are known, the tool can identify the locations
where the thickness changes. Where wall thicknesses are not known, best efforts will be made to estimate thicknesses based on best available data.

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Nominal Wall Thickness


Distance (m)

Wall Thickness
(mm)

Pipetype

Yield Strength
(SMYS)

Safety Factor

Length of
Segment (m)

11000000

-0.29

17.50

ERW

70000

0.72

11000001

581.42

25.00

ERW

70000

0.72

581.70
8.28

11000002

589.69

17.50

ERW

70000

0.72

281.58

11000003

871.27

23.80

ERW

70000

0.72

5.86

11000004

877.13

17.50

ERW

70000

0.72

1,736.99

11000005

2614.12

23.80

ERW

70000

0.72

37.51

11000006

2651.63

17.50

ERW

70000

0.72

6.65

11000007

2658.28

15.90

ERW

70000

0.72

601.08

11000008

3259.37

17.50

ERW

70000

0.72

220.78

11000009

3480.15

23.80

ERW

70000

0.72

23.94

11000010

3504.09

17.50

ERW

70000

0.72

544.30

11000011

4048.39

23.80

ERW

70000

0.72

37.17

11000012

4085.56

17.50

ERW

70000

0.72

552.46

11000013

4638.02

23.80

ERW

70000

0.72

86.17

11000014

4724.18

17.50

ERW

70000

0.72

352.84

11000015

5077.03

23.80

ERW

70000

0.72

637.35

11000016

5714.37

17.50

ERW

70000

0.72

1,709.64

11000017

7424.02

15.90

ERW

70000

0.72

5,553.89

11000018

12977.91

23.80

ERW

70000

0.72

24.76

11000019

13002.67

15.90

ERW

70000

0.72

444.13

11000020

13446.80

23.80

ERW

70000

0.72

5.52

11000021

13452.33

15.90

ERW

70000

0.72

79.44

11000022

13531.77

23.80

ERW

70000

0.72

148.15

11000023

13679.92

15.90

ERW

70000

0.72

36.60

11000024

13716.52

23.80

ERW

70000

0.72

8.15

11000025

13724.67

15.90

ERW

70000

0.72

1,587.62

11000026

15312.29

25.00

ERW

70000

0.72

37.55

11000027

15349.84

15.90

ERW

70000

0.72

394.95

11000028

15744.79

25.00

ERW

70000

0.72

37.32

11000029

15782.12

15.90

ERW

70000

0.72

413.07

11000030

16195.19

25.00

ERW

70000

0.72

25.01

11000031

16220.20

15.90

ERW

70000

0.72

385.94

11000032

16606.14

25.00

ERW

70000

0.72

12.30
Page 2 of 3

Nominal Wall Thickness

ID#

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Nominal Wall Thickness


Yield Strength
(SMYS)

Safety Factor

15.90

ERW

70000

0.72

1,297.84

23.80

ERW

70000

0.72

3,529.98

21446.27

15.90

ERW

70000

0.72

2,728.18

24174.45

23.80

ERW

70000

0.72

179.28

Distance (m)

11000033

16618.44

11000034

17916.29

11000035
11000036

Wall Thickness

Wall Thickness
(mm)

Total Length
(kilometers)

Pipetype

Total Length (m)

15.90

ERW

13,523

13.523

55.5%

17.50

ERW

5,987

5.987

24.6%

23.80

ERW

4,724

4.724

19.4%

25.00

ERW

120

0.120

0.5%

Length of
Segment (m)

Percent of Total Distance

Page 3 of 3

Nominal Wall Thickness

Pipetype

ID#

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Repair Report
Definition

Pipeline repairs that are typically detected include:


-

Sleeves

Half sole

Patches

Stopples

Clamps

Weld + End

Clock Spring

ID#
Distance
Length
Type of Repair

Each repair is automatically assigned a number in the software. This number is provided to assist the user of PIGTRAP software to
more easily find any given defect.
Given in either feet or meters, based on contractual agreements, this is the absolute distance measured by the tool from launch.
Gives the linear length of the repair.
Describes the type of repair detected during the inspection.

Repair Report

This table lists all the repairs to the pipeline detected during the inspection.

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Repair Report
ID#

Distance (m)

Length (m)

Type of Repair

Repair Report

No Repairs have been detected on this pipeline inspection

Page 2 of 2

TDW Services, Inc


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

AGM Information Summary


DEFINITIONS

ID#
Time
Distance
Description
Latitude
Longitude

Each location is automatically assigned a number in the software. This number is provided to assist the user of PIGTRAP software
to more easily find any given defect.
A reference time from the inspection tool. May also be used to locate features in the PIGTRAP software.
Given in either feet or meters, based on contractual agreements, this is the absolute distance measured by the tool from launch.
Describes the AGM in greater detail. Generally includes only valves and markers.
This shows the north/south position of the Location as supplied by the customer or recorded by an AGM box. For XYZ mapping
runs, these values are the supplied survey points or were calculated by the tool.
This shows the east/west position of the Location as supplied by the customer or recorded by an AGM box. For XYZ mapping runs,
these values are the supplied survey points or were calculated by the tool.

Zeroes in Latitude and Longitude mean that no data was supplied by the customer. Calculated or estimated values can be viewed in the Pipe Listing report.

AGM Information Summary

This table includes all values and above ground marker sites in the inspection run.

TDW Services, Inc


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

AGM Information Summary


Time

Distance(m)

10000000

34069.78

0.00

10000005

74899.81

24353.73

TYPE

NUMBER

Valves

Markers

Description

Latitude

Longitude

Valve (Launcher), IP-2 Sherpura

22.66249000

73.64448000

Valve (Receiver), SV-6 Halol

22.48802000

73.49245000

Page 2 of 2

AGM Information Summary

ID#

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Miscellaneous
DEFINITIONS

ID#
Time
Distance
Memo

Each miscellaneous note is automatically assigned a number in the software. This number is provided to assist the user of PIGTRAP software to more
easily find any given defect.
A reference time from the inspection tool. May also be used to locate features in the PIGTRAP software.
Given in either feet or meters, based on contractual agreements, this is the absolute distance measured by the tool from launch.
A description of the entry.

MEMO EXAMPLES

Gap or dent in
casing
Inclusion
Mill anomaly
Sensor
problems
Tool
stops/starts

When the casing is not welded, or when a gap occurs in the weld, this signature is detected by the tool, and identified with a Misc. remark.
An anomaly in the cross section of the pipeline. Inclusions may be detrimental if they protrude through the pipe wall.
The process of manufacturing pipe can often leave indications in the pipe wall. Typically these anomalies are not detrimental, and are
identified for the benefit of the client.
Noting locations where anomalous sensor readings occurred.
All tools are setup on a time-based system. When the tool stops, it continues to record, although not moving. When the tool moves very
slowly, it is possible that its movement is not detected, and therefore, reported distances may appear shorter than actual. Many stops and
starts may affect the overall distance accuracy of the tool.

Miscellaneous

There are occasions when special notations or circumstances require the addition of a note. These notes are included in this table for your reference.

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Miscellaneous
Time

Distance (m)

443.38

-9.57

12000001

85,283.14

24,365.30

Total

Number

Misc listings

Memo

Miscellaneous

ID#
12000000

Begin Run Tickle


End Run Tickle

Page 2 of 2

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report


DEFINITIONS

ID#
Description
Distance
Joint #

Each item is automatically assigned a number in the software. This number is provided to assist the user of PIGTRAP software to more easily find any
given defect.
Describes the event at the particular location. Identifies the type of the descriptive, being a weld, location, pipe thickness change, etc.
Given in either feet or meters, based on contractual agreements, this is the absolute distance from launch.
This unique number identifies the girth weld number.

U/S Weld Dist.

The distance to the upstream (U/S) weld (in feet or meters).

D/S Weld Dist.

The distance to the downstream (D/S) weld (in feet or meters).

Latitude
Longitude
Orientation: Deg. /
O'Clock
% Depth

If GPS coordinates were provided for launch, receive and AGMs, this provides the predicted Latitude reading of the location from the first GPS reading
based on INS readings obtained by the tool during the inspection.
If GPS coordinates were provided for launch, receive and AGMs, this provides the predicted Longitude reading of the location from the first GPS
reading based on INS readings obtained by the tool during the inspection.
Orientation is reported in degrees or oclock (0 degrees/12:00 at top of pipe) as viewed looking downstream.
Predicted depth of the defect as a percentage of nominal wall.

Length or Pipe
Thickness

Predicted length of the defect, reported in either inches or millimeters or if a wall thickness change, the new wall thickness begins at this point.

Width or Yield
Strength

Predicted width of the defect, reported in either inches or millimeters or if a wall thickness change, the new SMYS begins at this point.

P' (Calc. Safe Max.


Operating Pressure)
or Safety Factor
% Est. Press. (P'/P)
or Temp. Factor

Calculated safe maximum operating pressure for the pipeline segment as calculated based on information provided by the Customer. Magpie software
uses either ASME B31G, MODIFIED ASME B31G or Z662-99 to calculate the calculated safe maximum allowable operating pressure (P) of the
pipeline at a metal loss area.
Percent of maximum established pressure, this is calculated by dividing the calculated safe pressure of the defect (P') by the current established
maximum operating pressure of the pipeline (P). For Magpie reporting, P is either established MOP provided by the customer or the calculated
pressure rating for the pipe (P). Percentages less than 100% are considered pressure reducing.

Pipeline Listing Report

The Pipeline Listing Report presents all detected pipeline data in sequential order, beginning at launcher and ending at the receiver. The table includes welds, locations, metal
loss defects, AGMs, wall thickness changes, etc.

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

12000000 Begin Run Tickle

-9.6

9.3

0.00000000

0.00000000

11000000 WT CHANGE

-0.3

110

0.0

0.0

0.00000000

0.00000000

110 WELD

-0.3

110

0.0

0.5

0.00000000

0.00000000

0.0

110

0.3

0.2

22.66249000

73.64448000

10000000 Valve (Launcher), IP-2


Sherpura
120 WELD

0.2

120

0.0

1.3

22.66258139

73.64446161

130 WELD

1.6

130

0.0

7.4

22.66267392

73.64443788

140 WELD

9.0

140

0.0

13.8

22.66276811

73.64438160

150 WELD

22.7

150

0.0

12.4

22.66275682

73.64409020

160 WELD

35.1

160

0.0

12.6

22.66234493

73.64382676

170 WELD

47.7

170

0.0

12.3

22.66195931

73.64387666

180 WELD

60.0

180

0.0

12.6

22.66164446

73.64412422

190 WELD

72.6

190

0.0

12.4

22.66144135

73.64445413

200 WELD

85.0

200

0.0

13.1

22.66133977

73.64483059

210 WELD

98.2

210

0.0

10.9

22.66135735

73.64522820

220 WELD

109.1

220

0.0

12.3

22.66149372

73.64562666

230 WELD

121.4

230

0.0

12.9

22.66166789

73.64593727

240 WELD

134.3

240

0.0

12.2

22.66194252

73.64622297

250 WELD

146.6

250

0.0

11.8

22.66229787

73.64643617

260 WELD

158.3

260

0.0

12.3

22.66267749

73.64655836

270 WELD

170.6

270

0.0

12.1

22.66307087

73.64658716

280 WELD

182.7

280

0.0

11.8

22.66348979

73.64650775

290 WELD

194.6

290

0.0

11.9

22.66388802

73.64631947

300 WELD

206.4

300

0.0

13.4

22.66425779

73.64603514

310 WELD

219.8

310

0.0

12.1

22.66455603

73.64565344

320 WELD

231.9

320

0.0

12.2

22.66479361

73.64510237

330 WELD

244.1

330

0.0

10.1

22.66489669

73.64452445

340 WELD

254.3

340

0.0

12.9

22.66485255

73.64385149

350 WELD

267.2

350

0.0

13.4

22.66464991

73.64317940

360 WELD

280.6

360

0.0

13.1

22.66390414

73.64224743

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor
17.50

70000

0.72

Page 2 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

370 WELD

293.7

370

0.0

12.4

22.66214821

73.64173042

380 WELD

306.1

380

0.0

12.6

22.66042705

73.64263185

390 WELD

318.7

390

0.0

13.6

22.65974231

73.64371527

400 WELD

332.2

400

0.0

12.9

22.65948686

73.64463566

410 WELD

345.1

410

0.0

11.7

22.65941163

73.64539139

420 WELD

356.8

420

0.0

10.1

22.65939467

73.64594451

430 WELD

366.9

430

0.0

12.6

22.65938872

73.64637013

440 WELD

379.5

440

0.0

11.8

22.65939712

73.64673095

450 WELD

391.3

450

0.0

12.6

22.65945846

73.64715388

460 WELD

403.9

460

0.0

12.5

22.65949871

73.64750504

470 WELD

416.4

470

0.0

12.2

22.65957509

73.64787148

480 WELD

428.6

480

0.0

12.6

22.65963539

73.64820103

490 WELD

441.2

490

0.0

12.5

22.65966179

73.64848860

500 WELD

453.6

500

0.0

12.7

22.65970656

73.64878287

510 WELD

466.4

510

0.0

12.5

22.65975278

73.64906759

520 WELD

478.8

520

0.0

13.3

22.65978598

73.64934141

530 WELD

492.2

530

0.0

13.1

22.65978704

73.64959086

540 WELD

505.3

540

0.0

13.1

22.65977135

73.64983881

550 WELD

518.4

550

0.0

12.7

22.65975794

73.65008371

560 WELD

531.1

560

0.0

13.0

22.65972243

73.65031614

570 WELD

544.1

570

0.0

12.8

22.65965529

73.65052805

580 WELD

556.8

580

0.0

12.7

22.65954397

73.65071865

590 WELD

569.5

590

0.0

11.9

22.65938280

73.65087544

11000001 WT CHANGE

581.4

600

0.0

8.3

22.65937498

73.65088174

600 WELD

581.4

600

0.0

8.3

22.65920499

73.65101871

10000001 Bend left

585.7

600

2.8

5.5

22.65920285

73.65101962

11000002 WT CHANGE

589.7

610

0.0

0.0

22.65919868

73.65102140

610 WELD

589.7

610

0.0

10.5

22.65898335

73.65111346

620 WELD

600.2

620

0.0

12.6

22.65887194

73.65125068

630 WELD

612.8

630

0.0

9.2

22.65872635

73.65138811

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

25.00

70000

0.72

17.50

70000

0.72

12:00

Page 3 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

640 WELD

622.0

640

0.0

12.4

22.65855277

73.65152804

650 WELD

634.4

650

0.0

12.3

22.65840509

73.65164671

660 WELD

646.6

660

0.0

13.2

22.65822508

73.65177716

670 WELD

659.8

670

0.0

3.8

22.65801761

73.65187947

680 WELD

663.6

680

0.0

13.8

22.65773599

73.65190605

690 WELD

677.4

690

0.0

13.1

22.65761689

73.65197089

700 WELD

690.5

700

0.0

12.2

22.65731414

73.65196585

710 WELD

702.7

710

0.0

12.4

22.65700361

73.65191051

720 WELD

715.1

720

0.0

12.3

22.65670801

73.65180232

730 WELD

727.4

730

0.0

6.3

22.65642474

73.65165377

740 WELD

733.7

740

0.0

13.0

22.65614503

73.65149423

750 WELD

746.8

750

0.0

12.9

22.65596942

73.65144307

760 WELD

759.6

760

0.0

12.7

22.65572266

73.65123907

770 WELD

772.3

770

0.0

12.9

22.65547831

73.65102473

780 WELD

785.2

780

0.0

12.5

22.65531277

73.65083552

790 WELD

797.7

790

0.0

12.5

22.65514054

73.65062754

800 WELD

810.2

800

0.0

13.1

22.65506297

73.65050210

810 WELD

823.3

810

0.0

13.4

22.65498067

73.65036647

820 WELD

836.6

820

0.0

13.1

22.65503686

73.65041227

830 WELD

849.7

830

0.0

5.7

22.65520909

73.65067671

840 WELD

855.4

840

0.0

13.3

22.65539610

73.65095438

850 WELD

868.7

850

0.0

2.6

22.65544441

73.65111650

11000003 WT CHANGE

871.3

860

0.0

0.1

22.65544553

73.65111843

860 WELD

871.3

860

0.0

5.8

22.65568524

73.65153278

10000002 Bend right

874.9

860

2.0

3.8

22.65568465

73.65153448

11000004 WT CHANGE

877.1

870

0.0

0.0

22.65568358

73.65153760

870 WELD

877.2

870

0.0

11.9

22.65564202

73.65165850

880 WELD

889.1

880

0.0

12.3

22.65548418

73.65169875

890 WELD

901.4

890

0.0

12.2

22.65523486

73.65171012

900 WELD

913.6

900

0.0

8.4

22.65497822

73.65171222

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

23.80

70000

0.72

17.50

70000

0.72

12:00

Page 4 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

910 WELD

922.0

910

0.0

10.7

22.65472355

73.65170887

920 WELD

932.8

920

0.0

8.6

22.65452795

73.65172815

930 WELD

941.4

930

0.0

4.8

22.65428623

73.65171008

940 WELD

946.2

940

0.0

10.6

22.65408075

73.65170940

950 WELD

956.8

950

0.0

12.9

22.65391695

73.65169848

960 WELD

969.7

960

0.0

14.2

22.65363593

73.65156160

970 WELD

983.9

970

0.0

11.7

22.65331096

73.65134312

980 WELD

995.6

980

0.0

12.0

22.65296974

73.65103545

990 WELD

1,007.6

990

0.0

12.5

22.65269090

73.65075926

1000 WELD

1,020.1

1000

0.0

11.6

22.65242389

73.65045196

1010 WELD

1,031.8

1010

0.0

12.5

22.65217394

73.65011401

1020 WELD

1,044.2

1020

0.0

12.3

22.65195639

73.64979199

1030 WELD

1,056.5

1030

0.0

11.7

22.65175795

73.64944209

1040 WELD

1,068.2

1040

0.0

12.7

22.65158576

73.64909980

1050 WELD

1,080.9

1050

0.0

12.2

22.65144117

73.64878301

1060 WELD

1,093.2

1060

0.0

13.2

22.65132327

73.64846131

1070 WELD

1,106.4

1070

0.0

12.7

22.65123369

73.64818288

1080 WELD

1,119.1

1080

0.0

12.6

22.65115990

73.64789509

1090 WELD

1,131.7

1090

0.0

11.6

22.65110899

73.64765971

1100 WELD

1,143.3

1100

0.0

11.2

22.65108689

73.64750410

1110 WELD

1,154.5

1110

0.0

11.3

22.65106571

73.64737845

1120 WELD

1,165.8

1120

0.0

11.3

22.65106596

73.64735135

1130 WELD

1,177.2

1130

0.0

11.5

22.65106643

73.64732162

1140 WELD

1,188.7

1140

0.0

11.7

22.65110949

73.64751355

1150 WELD

1,200.4

1150

0.0

11.8

22.65118223

73.64785699

1160 WELD

1,212.2

1160

0.0

11.6

22.65128974

73.64838106

1170 WELD

1,223.8

1170

0.0

11.7

22.65142670

73.64899851

1180 WELD

1,235.5

1180

0.0

11.8

22.65159030

73.64962963

1190 WELD

1,247.3

1190

0.0

11.4

22.65176755

73.65029561

1200 WELD

1,258.7

1200

0.0

11.7

22.65189933

73.65089842

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 5 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

1210 WELD

1,270.4

1210

0.0

11.8

22.65199843

73.65141962

1220 WELD

1,282.2

1220

0.0

11.6

22.65204547

73.65185570

1230 WELD

1,293.8

1230

0.0

11.5

22.65196029

73.65209791

1240 WELD

1,305.3

1240

0.0

11.4

22.65178028

73.65218646

1250 WELD

1,316.6

1250

0.0

11.7

22.65153438

73.65215565

1260 WELD

1,328.3

1260

0.0

11.5

22.65122461

73.65197884

1270 WELD

1,339.8

1270

0.0

11.3

22.65089999

73.65175064

1280 WELD

1,351.1

1280

0.0

11.6

22.65056277

73.65143866

1290 WELD

1,362.7

1290

0.0

11.7

22.65024020

73.65112060

1300 WELD

1,374.4

1300

0.0

11.7

22.64992249

73.65078202

1310 WELD

1,386.1

1310

0.0

11.5

22.64961193

73.65041467

1320 WELD

1,397.6

1320

0.0

11.4

22.64931156

73.65001597

1330 WELD

1,409.0

1330

0.0

11.9

22.64902959

73.64959669

1340 WELD

1,420.9

1340

0.0

11.4

22.64876967

73.64914658

1350 WELD

1,432.3

1350

0.0

11.3

22.64852169

73.64865097

1360 WELD

1,443.6

1360

0.0

11.3

22.64830380

73.64815943

1370 WELD

1,455.0

1370

0.0

11.4

22.64811107

73.64765973

1380 WELD

1,466.4

1380

0.0

11.8

22.64794750

73.64715221

1390 WELD

1,478.2

1390

0.0

11.8

22.64781275

73.64664482

1400 WELD

1,490.0

1400

0.0

11.7

22.64771587

73.64614792

1410 WELD

1,501.7

1410

0.0

11.8

22.64764888

73.64568592

1420 WELD

1,513.5

1420

0.0

11.6

22.64759740

73.64523000

1430 WELD

1,525.2

1430

0.0

11.4

22.64757874

73.64487628

1440 WELD

1,536.6

1440

0.0

11.8

22.64756890

73.64454238

1450 WELD

1,548.4

1450

0.0

12.0

22.64756862

73.64427382

1460 WELD

1,560.4

1460

0.0

11.4

22.64758040

73.64420016

1470 WELD

1,571.8

1470

0.0

11.7

22.64759165

73.64427894

1480 WELD

1,583.5

1480

0.0

11.7

22.64759461

73.64448337

1490 WELD

1,595.2

1490

0.0

11.4

22.64759811

73.64482000

1500 WELD

1,606.6

1500

0.0

11.7

22.64759936

73.64539659

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 6 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

1510 WELD

1,618.3

1510

0.0

12.0

22.64760015

73.64616859

1520 WELD

1,630.3

1520

0.0

11.7

22.64761219

73.64703342

1530 WELD

1,642.0

1530

0.0

11.7

22.64763489

73.64788998

1540 WELD

1,653.7

1540

0.0

11.8

22.64766192

73.64866748

1550 WELD

1,665.6

1550

0.0

11.7

22.64767987

73.64935479

1560 WELD

1,677.3

1560

0.0

11.7

22.64763776

73.64985223

1570 WELD

1,689.0

1570

0.0

11.7

22.64756739

73.65024815

1580 WELD

1,700.8

1580

0.0

11.7

22.64745635

73.65052675

1590 WELD

1,712.5

1590

0.0

11.8

22.64730650

73.65069749

1600 WELD

1,724.2

1600

0.0

11.7

22.64710006

73.65070508

1610 WELD

1,736.0

1610

0.0

11.4

22.64685621

73.65059083

1620 WELD

1,747.4

1620

0.0

11.5

22.64661325

73.65047008

1630 WELD

1,758.9

1630

0.0

11.7

22.64635955

73.65028479

1640 WELD

1,770.6

1640

0.0

11.8

22.64610420

73.65007878

1650 WELD

1,782.4

1650

0.0

11.8

22.64584681

73.64985029

1660 WELD

1,794.2

1660

0.0

11.7

22.64558999

73.64960409

1670 WELD

1,805.9

1670

0.0

11.7

22.64532267

73.64920073

1680 WELD

1,817.6

1680

0.0

11.6

22.64506579

73.64876177

1690 WELD

1,829.2

1690

0.0

11.1

22.64482047

73.64831829

1700 WELD

1,840.3

1700

0.0

11.7

22.64459731

73.64780466

1710 WELD

1,852.0

1710

0.0

11.8

22.64440762

73.64727031

1720 WELD

1,863.8

1720

0.0

11.4

22.64422774

73.64669618

1730 WELD

1,875.2

1730

0.0

11.5

22.64408652

73.64610043

1740 WELD

1,886.7

1740

0.0

11.3

22.64397773

73.64552316

1750 WELD

1,898.1

1750

0.0

11.7

22.64388526

73.64493264

1760 WELD

1,909.8

1760

0.0

11.3

22.64382868

73.64438139

1770 WELD

1,921.1

1770

0.0

11.8

22.64379970

73.64384411

1780 WELD

1,932.9

1780

0.0

11.6

22.64378483

73.64332973

1790 WELD

1,944.5

1790

0.0

11.3

22.64379852

73.64290875

1800 WELD

1,955.8

1800

0.0

11.4

22.64382083

73.64259851

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 7 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

1810 WELD

1,967.3

1810

0.0

11.5

22.64384358

73.64235038

1820 WELD

1,978.7

1820

0.0

11.6

22.64385550

73.64230705

1830 WELD

1,990.3

1830

0.0

11.9

22.64385031

73.64243296

1840 WELD

2,002.2

1840

0.0

11.2

22.64380064

73.64289142

1850 WELD

2,013.4

1850

0.0

11.8

22.64374011

73.64350317

1860 WELD

2,025.2

1860

0.0

11.5

22.64368229

73.64415546

1870 WELD

2,036.7

1870

0.0

11.6

22.64361888

73.64496899

1880 WELD

2,048.3

1880

0.0

11.6

22.64352919

73.64576263

1890 WELD

2,059.9

1890

0.0

12.1

22.64342708

73.64645019

1900 WELD

2,072.0

1900

0.0

11.0

22.64331944

73.64703334

1910 WELD

2,083.0

1910

0.0

11.6

22.64319280

73.64750041

1920 WELD

2,094.5

1920

0.0

11.7

22.64301999

73.64763675

1930 WELD

2,106.2

1930

0.0

11.5

22.64281768

73.64759413

1940 WELD

2,117.7

1940

0.0

12.4

22.64259598

73.64735602

1950 WELD

2,130.1

1950

0.0

11.0

22.64237480

73.64692656

1960 WELD

2,141.2

1960

0.0

11.0

22.64217798

73.64624409

1970 WELD

2,152.1

1970

0.0

11.5

22.64203192

73.64558307

1980 WELD

2,163.6

1980

0.0

11.8

22.64195499

73.64495693

1990 WELD

2,175.4

1990

0.0

11.5

22.64192128

73.64439497

2000 WELD

2,186.9

2000

0.0

14.2

22.64192278

73.64402133

2010 WELD

2,201.0

2010

0.0

11.6

22.64193223

73.64386054

2020 WELD

2,212.6

2020

0.0

11.1

22.64196394

73.64388086

2030 WELD

2,223.8

2030

0.0

11.0

22.64195327

73.64428733

2040 WELD

2,234.8

2040

0.0

11.4

22.64189114

73.64508114

2050 WELD

2,246.2

2050

0.0

11.2

22.64179766

73.64585425

2060 WELD

2,257.3

2060

0.0

11.5

22.64171406

73.64660912

2070 WELD

2,268.8

2070

0.0

14.2

22.64163118

73.64728142

2080 WELD

2,283.1

2080

0.0

13.2

22.64148320

73.64761517

2090 WELD

2,296.3

2090

0.0

11.4

22.64124941

73.64749661

2100 WELD

2,307.7

2100

0.0

11.6

22.64101281

73.64720677

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 8 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

2110 WELD

2,319.3

2110

0.0

11.5

22.64080409

73.64661135

2120 WELD

2,330.9

2120

0.0

11.6

22.64062695

73.64591291

2130 WELD

2,342.4

2130

0.0

11.7

22.64052660

73.64518215

2140 WELD

2,354.1

2140

0.0

11.4

22.64045693

73.64445896

2150 WELD

2,365.5

2150

0.0

11.4

22.64044484

73.64391764

2160 WELD

2,377.0

2160

0.0

11.5

22.64045109

73.64352590

2170 WELD

2,388.5

2170

0.0

11.6

22.64045880

73.64352894

2180 WELD

2,400.1

2180

0.0

11.3

22.64046364

73.64362320

2190 WELD

2,411.4

2190

0.0

14.1

22.64042310

73.64429780

2200 WELD

2,425.5

2200

0.0

14.2

22.64032975

73.64517065

2210 WELD

2,439.8

2210

0.0

14.0

22.64023931

73.64619162

2220 WELD

2,453.7

2220

0.0

11.7

22.64013294

73.64702938

2230 WELD

2,465.4

2230

0.0

11.2

22.63990902

73.64695511

2240 WELD

2,476.6

2240

0.0

11.2

22.63969297

73.64661688

2250 WELD

2,487.8

2250

0.0

11.4

22.63950670

73.64593429

2260 WELD

2,499.2

2260

0.0

12.1

22.63934457

73.64522560

2270 WELD

2,511.3

2270

0.0

14.2

22.63920534

73.64448973

2280 WELD

2,525.5

2280

0.0

11.6

22.63914038

73.64365139

2290 WELD

2,537.1

2290

0.0

11.4

22.63915619

73.64282051

2300 WELD

2,548.5

2300

0.0

11.5

22.63916562

73.64281765

2310 WELD

2,560.0

2310

0.0

11.9

22.63917122

73.64285087

2320 WELD

2,571.9

2320

0.0

11.6

22.63915438

73.64318985

2330 WELD

2,583.5

2330

0.0

11.8

22.63909980

73.64394255

2340 WELD

2,595.3

2340

0.0

12.9

22.63905327

73.64476854

2350 WELD

2,608.2

2350

0.0

6.0

22.63904292

73.64555614

11000005 WT CHANGE

2,614.1

2360

0.0

0.0

22.63904303

73.64556143

2360 WELD

2,614.1

2360

0.0

12.6

22.63906323

73.64649042

2370 WELD

2,626.7

2370

0.0

11.7

22.63892634

73.64660040

2380 WELD

2,638.4

2380

0.0

7.8

22.63895798

73.64679227

2390 WELD

2,646.2

2390

0.0

5.5

22.63899265

73.64711817

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

23.80

70000

0.72

Page 9 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

11000006 WT CHANGE
2400 WELD
11000007 WT CHANGE

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

2,651.6

2400

0.0

0.0

22.63899148

73.64711351

2,651.6

2400

0.0

6.9

22.63882346

73.64644037

2,658.3

2400

0.0

0.3

22.63882119

73.64644572

2410 WELD

2,658.5

2410

0.0

10.2

22.63870916

73.64671080

2420 WELD

2,668.8

2420

0.0

13.2

22.63859962

73.64709411

2430 WELD

2,682.0

2430

0.0

11.5

22.63850798

73.64774157

2440 WELD

2,693.4

2440

0.0

11.5

22.63842986

73.64853495

2450 WELD

2,704.9

2450

0.0

11.0

22.63835528

73.64917677

2460 WELD

2,715.9

2460

0.0

10.9

22.63827656

73.64975073

2470 WELD

2,726.8

2470

0.0

11.3

22.63819207

73.65024494

2480 WELD

2,738.2

2480

0.0

11.0

22.63810061

73.65068092

2490 WELD

2,749.2

2490

0.0

11.1

22.63798916

73.65104005

2500 WELD

2,760.3

2500

0.0

10.9

22.63783733

73.65122665

2510 WELD

2,771.2

2510

0.0

11.5

22.63762895

73.65117418

2520 WELD

2,782.7

2520

0.0

11.1

22.63737780

73.65087233

2530 WELD

2,793.8

2530

0.0

11.0

22.63711333

73.65048536

2540 WELD

2,804.7

2540

0.0

11.6

22.63687268

73.65020391

2550 WELD

2,816.4

2550

0.0

11.3

22.63665170

73.65003589

2560 WELD

2,827.7

2560

0.0

11.6

22.63641678

73.64979809

2570 WELD

2,839.3

2570

0.0

11.4

22.63617076

73.64935767

2580 WELD

2,850.7

2580

0.0

11.2

22.63592760

73.64884132

2590 WELD

2,861.9

2590

0.0

11.4

22.63570153

73.64823494

2600 WELD

2,873.3

2600

0.0

14.2

22.63549335

73.64761746

2610 WELD

2,887.5

2610

0.0

11.4

22.63530059

73.64696125

2620 WELD

2,898.9

2620

0.0

11.7

22.63513392

73.64606767

2630 WELD

2,910.5

2630

0.0

11.4

22.63501052

73.64533502

2640 WELD

2,922.0

2640

0.0

11.6

22.63495127

73.64465313

2650 WELD

2,933.6

2650

0.0

12.1

22.63495829

73.64457919

2660 WELD

2,945.7

2660

0.0

10.8

22.63495717

73.64498352

2670 WELD

2,956.6

2670

0.0

11.5

22.63488043

73.64581797

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor
17.50

70000

0.72

15.90

70000

0.72

Page 10 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

2680 WELD

2,968.1

2680

0.0

11.5

22.63480580

73.64655293

2690 WELD

2,979.6

2690

0.0

13.9

22.63468918

73.64715583

2700 WELD

2,993.5

2700

0.0

11.5

22.63450668

73.64729094

2710 WELD

3,004.9

2710

0.0

11.6

22.63428936

73.64728137

2720 WELD

3,016.5

2720

0.0

11.6

22.63408834

73.64719333

2730 WELD

3,028.1

2730

0.0

11.5

22.63390687

73.64652752

2740 WELD

3,039.7

2740

0.0

11.5

22.63381490

73.64583478

2750 WELD

3,051.1

2750

0.0

12.3

22.63378407

73.64535247

2760 WELD

3,063.4

2760

0.0

14.2

22.63376837

73.64494326

2770 WELD

3,077.6

2770

0.0

11.3

22.63376961

73.64457684

2780 WELD

3,088.9

2780

0.0

12.0

22.63377986

73.64522232

2790 WELD

3,100.9

2790

0.0

11.5

22.63368363

73.64598514

2800 WELD

3,112.5

2800

0.0

11.4

22.63357412

73.64670745

2810 WELD

3,123.8

2810

0.0

11.4

22.63338167

73.64674934

2820 WELD

3,135.2

2820

0.0

11.2

22.63318366

73.64667564

2830 WELD

3,146.4

2830

0.0

13.5

22.63298236

73.64650501

2840 WELD

3,159.9

2840

0.0

10.8

22.63278692

73.64642759

2850 WELD

3,170.7

2850

0.0

13.4

22.63257074

73.64634331

2860 WELD

3,184.1

2860

0.0

10.7

22.63237940

73.64627955

2870 WELD

3,194.8

2870

0.0

11.6

22.63216496

73.64620231

2880 WELD

3,206.3

2880

0.0

11.6

22.63197452

73.64611487

2890 WELD

3,217.9

2890

0.0

11.3

22.63180021

73.64555623

2900 WELD

3,229.2

2900

0.0

10.7

22.63178250

73.64516390

2910 WELD

3,239.9

2910

0.0

11.5

22.63177164

73.64482050

2920 WELD

3,251.4

2920

0.0

8.0

22.63177322

73.64492460

11000008 WT CHANGE

3,259.4

2930

0.0

0.0

22.63177279

73.64493164

2930 WELD

3,259.4

2930

0.0

12.3

22.63173101

73.64561644

2940 WELD

3,271.7

2940

0.0

12.6

22.63161100

73.64603140

2950 WELD

3,284.3

2950

0.0

12.1

22.63140855

73.64566995

2960 WELD

3,296.4

2960

0.0

12.0

22.63132685

73.64489968

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

17.50

70000

0.72

Page 11 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

2970 WELD

3,308.4

2970

0.0

11.4

22.63127942

73.64419944

2980 WELD

3,319.9

2980

0.0

13.2

22.63125917

73.64356636

2990 WELD

3,333.1

2990

0.0

13.3

22.63126199

73.64312776

3000 WELD

3,346.5

3000

0.0

12.7

22.63128837

73.64264775

3010 WELD

3,359.1

3010

0.0

12.1

22.63132226

73.64214337

3020 WELD

3,371.2

3020

0.0

12.1

22.63135711

73.64164221

3030 WELD

3,383.3

3030

0.0

12.0

22.63139333

73.64114389

3040 WELD

3,395.2

3040

0.0

12.1

22.63143789

73.64062379

3050 WELD

3,407.3

3050

0.0

12.2

22.63149000

73.64008738

3060 WELD

3,419.5

3060

0.0

12.3

22.63155368

73.63952299

3070 WELD

3,431.8

3070

0.0

13.1

22.63162994

73.63893073

3080 WELD

3,444.9

3080

0.0

11.8

22.63172204

73.63830374

3090 WELD

3,456.7

3090

0.0

11.8

22.63183786

73.63764625

3100 WELD

3,468.5

3100

0.0

2.5

22.63194925

73.63702187

3110 WELD

3,471.0

3110

0.0

9.2

22.63175273

73.63784119

3,480.2

3120

0.0

0.0

22.63174824

73.63784768

3120 WELD

3,480.2

3120

0.0

12.3

22.63164031

73.63800369

3130 WELD

3,492.5

3130

0.0

11.7

22.63149549

73.63783154

3,504.1

3140

0.0

0.1

22.63149424

73.63784174

3140 WELD

3,504.2

3140

0.0

11.7

22.63146675

73.63806593

3150 WELD

3,515.8

3150

0.0

12.0

22.63118187

73.63893962

3160 WELD

3,527.8

3160

0.0

11.9

22.63091911

73.63979826

3170 WELD

3,539.7

3170

0.0

12.1

22.63067118

73.64063551

3180 WELD

3,551.9

3180

0.0

13.0

22.63044133

73.64142054

3190 WELD

3,564.8

3190

0.0

13.1

22.63022580

73.64220064

3200 WELD

3,577.9

3200

0.0

13.5

22.63001906

73.64301207

3210 WELD

3,591.4

3210

0.0

11.0

22.62982736

73.64380927

3220 WELD

3,602.4

3220

0.0

12.0

22.62964807

73.64460639

3230 WELD

3,614.4

3230

0.0

12.1

22.62949514

73.64523865

3240 WELD

3,626.5

3240

0.0

11.9

22.62934647

73.64590940

11000009 WT CHANGE

11000010 WT CHANGE

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

23.80

70000

0.72

17.50

70000

0.72

Page 12 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

3250 WELD

3,638.4

3250

0.0

12.1

22.62920657

73.64656596

3260 WELD

3,650.5

3260

0.0

12.9

22.62907528

73.64719740

3270 WELD

3,663.4

3270

0.0

12.2

22.62895063

73.64782294

3280 WELD

3,675.6

3280

0.0

12.6

22.62883113

73.64846985

3290 WELD

3,688.3

3290

0.0

11.3

22.62871912

73.64906691

3300 WELD

3,699.6

3300

0.0

11.6

22.62861202

73.64966418

3310 WELD

3,711.2

3310

0.0

12.1

22.62851064

73.65018739

3320 WELD

3,723.2

3320

0.0

11.5

22.62841266

73.65071151

3330 WELD

3,734.7

3330

0.0

12.2

22.62831785

73.65124186

3340 WELD

3,746.9

3340

0.0

12.8

22.62822606

73.65173447

3350 WELD

3,759.8

3350

0.0

12.1

22.62813687

73.65224494

3360 WELD

3,771.8

3360

0.0

11.6

22.62805028

73.65276665

3370 WELD

3,783.5

3370

0.0

11.7

22.62796543

73.65324556

3380 WELD

3,795.1

3380

0.0

13.4

22.62788194

73.65369785

3390 WELD

3,808.5

3390

0.0

13.2

22.62779979

73.65414132

3400 WELD

3,821.7

3400

0.0

12.4

22.62764484

73.65438933

3410 WELD

3,834.1

3410

0.0

12.4

22.62745948

73.65451671

3420 WELD

3,846.6

3420

0.0

11.6

22.62721408

73.65434616

3430 WELD

3,858.2

3430

0.0

11.5

22.62695836

73.65410716

3440 WELD

3,869.7

3440

0.0

13.7

22.62668574

73.65358385

3450 WELD

3,883.3

3450

0.0

13.3

22.62645485

73.65292788

3460 WELD

3,896.6

3460

0.0

12.5

22.62626224

73.65218046

3470 WELD

3,909.1

3470

0.0

11.8

22.62615110

73.65160786

3480 WELD

3,920.9

3480

0.0

11.8

22.62614897

73.65149359

3490 WELD

3,932.7

3490

0.0

12.4

22.62616768

73.65153985

3500 WELD

3,945.1

3500

0.0

10.7

22.62624013

73.65209310

3510 WELD

3,955.8

3510

0.0

12.2

22.62633227

73.65278177

3520 WELD

3,968.0

3520

0.0

13.7

22.62639579

73.65347909

3530 WELD

3,981.7

3530

0.0

12.6

22.62642124

73.65423096

3540 WELD

3,994.2

3540

0.0

11.9

22.62615311

73.65398670

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 13 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

3550 WELD

4,006.2

3550

0.0

12.2

22.62588664

73.65366416

3560 WELD

4,018.3

3560

0.0

3.6

22.62561724

73.65322096

3570 WELD

4,022.0

3570

0.0

12.6

22.62534827

73.65257915

3580 WELD

4,034.6

3580

0.0

13.8

22.62520654

73.65239567

11000011 WT CHANGE

4,048.4

3590

0.0

0.0

22.62520402

73.65238374

3590 WELD

4,048.4

3590

0.0

12.4

22.62507816

73.65178748

3600 WELD

4,060.8

3600

0.0

12.4

22.62498297

73.65235213

3610 WELD

4,073.2

3610

0.0

12.4

22.62480584

73.65250751

11000012 WT CHANGE

4,085.6

3620

0.0

0.1

22.62479949

73.65249898

3620 WELD

4,085.6

3620

0.0

12.1

22.62455485

73.65217071

3630 WELD

4,097.7

3630

0.0

11.7

22.62430280

73.65177161

3640 WELD

4,109.4

3640

0.0

11.5

22.62405753

73.65135554

3650 WELD

4,121.0

3650

0.0

11.3

22.62382894

73.65108595

3660 WELD

4,132.3

3660

0.0

11.4

22.62387199

73.65138256

3670 WELD

4,143.7

3670

0.0

10.6

22.62391061

73.65162895

3680 WELD

4,154.2

3680

0.0

9.8

22.62378763

73.65106010

3690 WELD

4,164.0

3690

0.0

10.6

22.62381400

73.65170943

3700 WELD

4,174.6

3700

0.0

11.8

22.62376407

73.65225345

3710 WELD

4,186.4

3710

0.0

11.6

22.62380274

73.65252117

3720 WELD

4,198.0

3720

0.0

11.6

22.62384745

73.65272992

3730 WELD

4,209.6

3730

0.0

11.9

22.62386475

73.65277349

3740 WELD

4,221.5

3740

0.0

11.7

22.62390188

73.65293855

3750 WELD

4,233.2

3750

0.0

11.8

22.62392462

73.65299353

3760 WELD

4,245.0

3760

0.0

12.0

22.62388052

73.65273011

3770 WELD

4,257.0

3770

0.0

12.1

22.62384722

73.65250592

3780 WELD

4,269.1

3780

0.0

12.3

22.62384751

73.65243586

3790 WELD

4,281.4

3790

0.0

12.8

22.62387401

73.65250779

3800 WELD

4,294.1

3800

0.0

12.0

22.62391630

73.65266676

3810 WELD

4,306.1

3810

0.0

13.1

22.62398738

73.65297947

3820 WELD

4,319.2

3820

0.0

12.6

22.62406055

73.65333975

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

23.80

70000

0.72

17.50

70000

0.72

Page 14 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

3830 WELD

4,331.8

3830

0.0

12.0

22.62417738

73.65389824

3840 WELD

4,343.8

3840

0.0

12.4

22.62430941

73.65454992

3850 WELD

4,356.2

3850

0.0

12.0

22.62445550

73.65528859

3860 WELD

4,368.2

3860

0.0

11.4

22.62462615

73.65629441

3870 WELD

4,379.6

3870

0.0

13.1

22.62481129

73.65727359

3880 WELD

4,392.7

3880

0.0

12.6

22.62500136

73.65819920

3890 WELD

4,405.3

3890

0.0

12.6

22.62524979

73.65927042

3900 WELD

4,417.9

3900

0.0

11.9

22.62528896

73.65994131

3910 WELD

4,429.9

3910

0.0

12.0

22.62528360

73.66049131

3920 WELD

4,441.9

3920

0.0

12.3

22.62522368

73.66088624

3930 WELD

4,454.2

3930

0.0

13.2

22.62512378

73.66118245

3940 WELD

4,467.4

3940

0.0

11.6

22.62477875

73.66079596

3950 WELD

4,479.0

3950

0.0

10.9

22.62442452

73.65993804

3960 WELD

4,489.9

3960

0.0

11.7

22.62413505

73.65921092

3970 WELD

4,501.6

3970

0.0

12.4

22.62388423

73.65854865

3980 WELD

4,514.0

3980

0.0

12.1

22.62366141

73.65789333

3990 WELD

4,526.1

3990

0.0

12.0

22.62350430

73.65735422

4000 WELD

4,538.1

4000

0.0

12.7

22.62342203

73.65702870

4010 WELD

4,550.8

4010

0.0

12.3

22.62361921

73.65784473

4020 WELD

4,563.1

4020

0.0

12.7

22.62382506

73.65890283

4030 WELD

4,575.8

4030

0.0

12.4

22.62399758

73.65986403

4040 WELD

4,588.2

4040

0.0

13.2

22.62410086

73.66067472

4050 WELD

4,601.4

4050

0.0

11.4

22.62376556

73.66030281

4060 WELD

4,612.8

4060

0.0

12.2

22.62338527

73.65977071

4070 WELD

4,625.0

4070

0.0

13.0

22.62304169

73.65927219

11000013 WT CHANGE

4,638.0

4080

0.0

0.0

22.62303726

73.65926169

4080 WELD

4,638.0

4080

0.0

11.5

22.62266010

73.65836995

4090 WELD

4,649.6

4090

0.0

13.1

22.62289947

73.65935306

4100 WELD

4,662.7

4100

0.0

12.3

22.62309696

73.66004140

4110 WELD

4,675.0

4110

0.0

12.2

22.62337750

73.66098083

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

23.80

70000

0.72

Page 15 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

4120 WELD

4,687.2

4120

0.0

12.3

22.62341232

73.66160779

4130 WELD

4,699.5

4130

0.0

12.3

22.62347447

73.66227112

4140 WELD

4,711.8

4140

0.0

12.4

22.62352340

73.66289101

4,724.2

4150

0.0

0.0

22.62352431

73.66290198

4150 WELD

4,724.2

4150

0.0

11.5

22.62357340

73.66349652

4160 WELD

4,735.7

4160

0.0

12.1

22.62373736

73.66428918

4170 WELD

4,747.9

4170

0.0

13.9

22.62382419

73.66490893

4180 WELD

4,761.8

4180

0.0

13.8

22.62373446

73.66519588

4190 WELD

4,775.6

4190

0.0

12.0

22.62322216

73.66441752

4200 WELD

4,787.6

4200

0.0

13.1

22.62276770

73.66379876

4210 WELD

4,800.7

4210

0.0

14.6

22.62256916

73.66332675

4220 WELD

4,815.3

4220

0.0

9.7

22.62246334

73.66301701

4230 WELD

4,825.0

4230

0.0

13.5

22.62196167

73.66202293

4240 WELD

4,838.5

4240

0.0

11.2

22.62178856

73.66207427

4250 WELD

4,849.7

4250

0.0

11.0

22.62183951

73.66213667

4260 WELD

4,860.7

4260

0.0

12.7

22.62157054

73.66149222

4270 WELD

4,873.4

4270

0.0

12.7

22.62119662

73.66070590

4280 WELD

4,886.1

4280

0.0

12.6

22.62078791

73.65979382

4290 WELD

4,898.8

4290

0.0

12.8

22.62039814

73.65886604

4300 WELD

4,911.5

4300

0.0

12.7

22.62002716

73.65794158

4310 WELD

4,924.3

4310

0.0

11.8

22.61967157

73.65699749

4320 WELD

4,936.1

4320

0.0

9.6

22.61933200

73.65605727

4330 WELD

4,945.7

4330

0.0

14.3

22.61902328

73.65518739

4340 WELD

4,959.9

4340

0.0

12.4

22.61876628

73.65449074

4350 WELD

4,972.4

4350

0.0

13.0

22.61845113

73.65342437

4360 WELD

4,985.3

4360

0.0

11.6

22.61819836

73.65247185

4370 WELD

4,997.0

4370

0.0

12.7

22.61797217

73.65146781

4380 WELD

5,009.7

4380

0.0

12.1

22.61778523

73.65057159

4390 WELD

5,021.7

4390

0.0

12.5

22.61762656

73.64961612

4400 WELD

5,034.3

4400

0.0

14.1

22.61749864

73.64873284

11000014 WT CHANGE

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

17.50

70000

0.72

Page 16 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

4410 WELD

5,048.3

4410

0.0

12.5

22.61753410

73.64967467

4420 WELD

5,060.9

4420

0.0

12.7

22.61759576

73.65079797

4430 WELD

5,073.6

4430

0.0

3.5

22.61763092

73.65184344

5,077.0

4440

0.0

0.0

22.61763107

73.65184648

4440 WELD

5,077.0

4440

0.0

12.2

22.61768319

73.65290162

4450 WELD

5,089.3

4450

0.0

12.2

22.61762375

73.65318495

4460 WELD

5,101.5

4460

0.0

12.2

22.61770268

73.65420374

4470 WELD

5,113.7

4470

0.0

12.3

22.61780126

73.65522133

4480 WELD

5,126.0

4480

0.0

12.3

22.61790244

73.65622507

4490 WELD

5,138.3

4490

0.0

12.2

22.61798923

73.65718427

4500 WELD

5,150.5

4500

0.0

11.8

22.61809760

73.65814510

4510 WELD

5,162.4

4510

0.0

12.1

22.61820520

73.65906748

4520 WELD

5,174.5

4520

0.0

12.2

22.61832524

73.65996408

4530 WELD

5,186.7

4530

0.0

12.4

22.61851912

73.66093697

4540 WELD

5,199.2

4540

0.0

12.1

22.61812446

73.66004002

4550 WELD

5,211.2

4550

0.0

12.0

22.61773909

73.65913791

4560 WELD

5,223.3

4560

0.0

12.0

22.61737757

73.65826191

4570 WELD

5,235.2

4570

0.0

12.1

22.61703199

73.65738953

4580 WELD

5,247.3

4580

0.0

12.5

22.61670256

73.65652364

4590 WELD

5,259.8

4590

0.0

12.1

22.61638512

73.65564980

4600 WELD

5,271.9

4600

0.0

11.8

22.61607462

73.65476843

4610 WELD

5,283.7

4610

0.0

13.2

22.61578434

73.65391652

4620 WELD

5,296.9

4620

0.0

12.0

22.61551208

73.65309601

4630 WELD

5,308.9

4630

0.0

12.0

22.61523166

73.65221239

4640 WELD

5,320.9

4640

0.0

12.2

22.61498316

73.65138812

4650 WELD

5,333.0

4650

0.0

12.6

22.61474193

73.65063837

4660 WELD

5,345.7

4660

0.0

11.8

22.61451236

73.64983994

4670 WELD

5,357.5

4670

0.0

10.7

22.61428767

73.64904124

4680 WELD

5,368.2

4680

0.0

9.3

22.61407873

73.64833485

4690 WELD

5,377.5

4690

0.0

11.3

22.61388775

73.64770423

11000015 WT CHANGE

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

23.80

70000

0.72

Page 17 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

4700 WELD

5,388.8

4700

0.0

11.7

22.61370693

73.64728978

4710 WELD

5,400.5

4710

0.0

11.7

22.61350864

73.64686589

4720 WELD

5,412.2

4720

0.0

11.6

22.61331200

73.64639996

4730 WELD

5,423.8

4730

0.0

12.1

22.61311290

73.64613838

4740 WELD

5,435.9

4740

0.0

12.1

22.61291508

73.64593651

4750 WELD

5,448.0

4750

0.0

12.2

22.61271384

73.64578321

4760 WELD

5,460.2

4760

0.0

12.1

22.61251284

73.64571644

4770 WELD

5,472.3

4770

0.0

13.6

22.61231195

73.64569711

4780 WELD

5,485.9

4780

0.0

12.1

22.61211268

73.64572605

4790 WELD

5,498.0

4790

0.0

12.2

22.61191589

73.64606896

4800 WELD

5,510.2

4800

0.0

11.8

22.61179433

73.64679141

4810 WELD

5,522.0

4810

0.0

12.2

22.61167872

73.64750805

4820 WELD

5,534.2

4820

0.0

11.0

22.61157029

73.64819688

4830 WELD

5,545.2

4830

0.0

12.1

22.61146777

73.64890340

4840 WELD

5,557.3

4840

0.0

12.2

22.61137165

73.64953041

4850 WELD

5,569.5

4850

0.0

10.9

22.61128080

73.65021563

4860 WELD

5,580.4

4860

0.0

10.2

22.61119568

73.65089932

4870 WELD

5,590.5

4870

0.0

10.8

22.61109465

73.65143446

4880 WELD

5,601.4

4880

0.0

9.7

22.61098693

73.65189022

4890 WELD

5,611.1

4890

0.0

11.0

22.61089196

73.65241254

4900 WELD

5,622.1

4900

0.0

12.4

22.61079575

73.65286387

4910 WELD

5,634.6

4910

0.0

11.8

22.61070482

73.65338149

4920 WELD

5,646.4

4920

0.0

10.6

22.61053637

73.65263123

4930 WELD

5,657.0

4930

0.0

11.0

22.61036336

73.65189518

4940 WELD

5,667.9

4940

0.0

12.1

22.61025038

73.65131361

4950 WELD

5,680.1

4950

0.0

11.9

22.61009791

73.65062105

4960 WELD

5,692.0

4960

0.0

10.1

22.61005830

73.65022021

4970 WELD

5,702.1

4970

0.0

12.3

22.61006141

73.65012669

5,714.4

4980

0.0

0.0

22.61005921

73.65011606

5,714.4

4980

0.0

10.3

22.61005437

73.65009266

11000016 WT CHANGE
4980 WELD

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

17.50

70000

0.72

Page 18 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

4990 WELD

5,724.7

4990

0.0

13.0

22.61007190

73.65011562

5000 WELD

5,737.6

5000

0.0

12.4

22.61008517

73.65032744

5010 WELD

5,750.0

5010

0.0

12.8

22.61013161

73.65067278

5020 WELD

5,762.8

5020

0.0

11.7

22.61018195

73.65122525

5030 WELD

5,774.5

5030

0.0

11.8

22.61023509

73.65204509

5040 WELD

5,786.3

5040

0.0

11.5

22.61024664

73.65289319

5050 WELD

5,797.8

5050

0.0

11.8

22.61020721

73.65364302

5060 WELD

5,809.6

5060

0.0

12.4

22.61017273

73.65436869

5070 WELD

5,822.0

5070

0.0

12.1

22.61013522

73.65507631

5080 WELD

5,834.1

5080

0.0

11.9

22.61009918

73.65579058

5090 WELD

5,846.0

5090

0.0

12.1

22.61006641

73.65647781

5100 WELD

5,858.0

5100

0.0

12.0

22.61003668

73.65714283

5110 WELD

5,870.0

5110

0.0

11.9

22.61001198

73.65780978

5120 WELD

5,882.0

5120

0.0

12.9

22.60999065

73.65846437

5130 WELD

5,894.8

5130

0.0

12.0

22.60996038

73.65907524

5140 WELD

5,906.8

5140

0.0

11.9

22.60993788

73.65972372

5150 WELD

5,918.7

5150

0.0

12.0

22.60991301

73.66031817

5160 WELD

5,930.7

5160

0.0

11.4

22.60987992

73.66087600

5170 WELD

5,942.1

5170

0.0

11.7

22.60984915

73.66143178

5180 WELD

5,953.8

5180

0.0

11.9

22.60980414

73.66191952

5190 WELD

5,965.7

5190

0.0

12.1

22.60976152

73.66241550

5200 WELD

5,977.8

5200

0.0

12.1

22.60972023

73.66290941

5210 WELD

5,989.9

5210

0.0

11.9

22.60966878

73.66337769

5220 WELD

6,001.8

5220

0.0

11.9

22.60961756

73.66383759

5230 WELD

6,013.7

5230

0.0

13.2

22.60955249

73.66425090

5240 WELD

6,026.9

5240

0.0

12.2

22.60936010

73.66430402

5250 WELD

6,039.1

5250

0.0

12.2

22.60914160

73.66431221

5260 WELD

6,051.3

5260

0.0

12.0

22.60892117

73.66428150

5270 WELD

6,063.3

5270

0.0

11.9

22.60867917

73.66417366

5280 WELD

6,075.2

5280

0.0

12.9

22.60841467

73.66352208

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 19 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

5290 WELD

6,088.1

5290

0.0

10.9

22.60816501

73.66287984

5300 WELD

6,099.0

5300

0.0

13.5

22.60791942

73.66219027

5310 WELD

6,112.5

5310

0.0

11.8

22.60771473

73.66162514

5320 WELD

6,124.3

5320

0.0

12.3

22.60786167

73.66219028

5330 WELD

6,136.6

5330

0.0

11.8

22.60798914

73.66272635

5340 WELD

6,148.4

5340

0.0

13.1

22.60813743

73.66334227

5350 WELD

6,161.5

5350

0.0

11.9

22.60828903

73.66400479

5360 WELD

6,173.5

5360

0.0

11.8

22.60847538

73.66479696

5370 WELD

6,185.3

5370

0.0

11.9

22.60864360

73.66554399

5380 WELD

6,197.2

5380

0.0

10.6

22.60879805

73.66630616

5390 WELD

6,207.7

5390

0.0

11.9

22.60894953

73.66706853

5400 WELD

6,219.6

5400

0.0

12.7

22.60906733

73.66773724

5410 WELD

6,232.3

5410

0.0

12.2

22.60879028

73.66754022

5420 WELD

6,244.5

5420

0.0

13.0

22.60847841

73.66724471

5430 WELD

6,257.5

5430

0.0

12.6

22.60815269

73.66686253

5440 WELD

6,270.1

5440

0.0

12.6

22.60779731

73.66636935

5450 WELD

6,282.7

5450

0.0

12.2

22.60744911

73.66584969

5460 WELD

6,294.8

5460

0.0

12.7

22.60710034

73.66516103

5470 WELD

6,307.6

5470

0.0

12.5

22.60676714

73.66449474

5480 WELD

6,320.1

5480

0.0

13.0

22.60643813

73.66377068

5490 WELD

6,333.0

5490

0.0

11.4

22.60614851

73.66304579

5500 WELD

6,344.4

5500

0.0

10.4

22.60587274

73.66229706

5510 WELD

6,354.9

5510

0.0

11.0

22.60562952

73.66164057

5520 WELD

6,365.9

5520

0.0

12.3

22.60540631

73.66103847

5530 WELD

6,378.1

5530

0.0

12.6

22.60517293

73.66038689

5540 WELD

6,390.7

5540

0.0

12.2

22.60494072

73.65966516

5550 WELD

6,402.9

5550

0.0

12.3

22.60475726

73.65899605

5560 WELD

6,415.2

5560

0.0

12.1

22.60459389

73.65836614

5570 WELD

6,427.3

5570

0.0

12.8

22.60444557

73.65775363

5580 WELD

6,440.1

5580

0.0

12.6

22.60430247

73.65714248

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 20 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

5590 WELD

6,452.7

5590

0.0

12.7

22.60416308

73.65649399

5600 WELD

6,465.4

5600

0.0

12.5

22.60407826

73.65601362

5610 WELD

6,477.9

5610

0.0

11.9

22.60401032

73.65557887

5620 WELD

6,489.8

5620

0.0

11.8

22.60374910

73.65487050

5630 WELD

6,501.6

5630

0.0

11.8

22.60350925

73.65414985

5640 WELD

6,513.4

5640

0.0

12.5

22.60328597

73.65340671

5650 WELD

6,525.9

5650

0.0

12.5

22.60307741

73.65263753

5660 WELD

6,538.4

5660

0.0

12.4

22.60289268

73.65180162

5670 WELD

6,550.8

5670

0.0

13.2

22.60273163

73.65096898

5680 WELD

6,564.0

5680

0.0

12.3

22.60271288

73.65066150

5690 WELD

6,576.2

5690

0.0

12.3

22.60275819

73.65138865

5700 WELD

6,588.5

5700

0.0

12.3

22.60279814

73.65211789

5710 WELD

6,600.8

5710

0.0

12.3

22.60284452

73.65287963

5720 WELD

6,613.1

5720

0.0

12.1

22.60289183

73.65370980

5730 WELD

6,625.2

5730

0.0

12.3

22.60294179

73.65456338

5740 WELD

6,637.5

5740

0.0

12.1

22.60299262

73.65542447

5750 WELD

6,649.6

5750

0.0

12.2

22.60304553

73.65631556

5760 WELD

6,661.9

5760

0.0

12.2

22.60309339

73.65719086

5770 WELD

6,674.0

5770

0.0

12.2

22.60281621

73.65653666

5780 WELD

6,686.2

5780

0.0

12.4

22.60254684

73.65585809

5790 WELD

6,698.6

5790

0.0

13.1

22.60228890

73.65511440

5800 WELD

6,711.7

5800

0.0

13.4

22.60204286

73.65431516

5810 WELD

6,725.0

5810

0.0

12.0

22.60181187

73.65342644

5820 WELD

6,737.1

5820

0.0

12.2

22.60159616

73.65250715

5830 WELD

6,749.3

5830

0.0

11.8

22.60140758

73.65167285

5840 WELD

6,761.1

5840

0.0

13.0

22.60124253

73.65081898

5850 WELD

6,774.1

5850

0.0

12.7

22.60127892

73.65138738

5860 WELD

6,786.8

5860

0.0

12.4

22.60133319

73.65206725

5870 WELD

6,799.3

5870

0.0

13.3

22.60138879

73.65282046

5880 WELD

6,812.6

5880

0.0

11.9

22.60144310

73.65364207

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 21 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

5890 WELD

6,824.5

5890

0.0

11.9

22.60151463

73.65456372

5900 WELD

6,836.5

5900

0.0

12.4

22.60157350

73.65542330

5910 WELD

6,848.8

5910

0.0

12.4

22.60163644

73.65630217

5920 WELD

6,861.2

5920

0.0

12.3

22.60170584

73.65722990

5930 WELD

6,873.5

5930

0.0

13.8

22.60172772

73.65809425

5940 WELD

6,887.3

5940

0.0

12.7

22.60172542

73.65887670

5950 WELD

6,899.9

5950

0.0

11.4

22.60157521

73.65919374

5960 WELD

6,911.3

5960

0.0

13.0

22.60131092

73.65887868

5970 WELD

6,924.3

5970

0.0

12.5

22.60103750

73.65832795

5980 WELD

6,936.8

5980

0.0

11.6

22.60074170

73.65762884

5990 WELD

6,948.4

5990

0.0

12.1

22.60046375

73.65686808

6000 WELD

6,960.5

6000

0.0

12.6

22.60026330

73.65608074

6010 WELD

6,973.1

6010

0.0

13.2

22.60007206

73.65526206

6020 WELD

6,986.4

6020

0.0

11.6

22.59990586

73.65443987

6030 WELD

6,998.0

6030

0.0

13.3

22.59974333

73.65356283

6040 WELD

7,011.3

6040

0.0

12.3

22.59967388

73.65306600

6050 WELD

7,023.6

6050

0.0

12.0

22.59962924

73.65258732

6060 WELD

7,035.6

6060

0.0

12.4

22.59960199

73.65225480

6070 WELD

7,048.0

6070

0.0

10.4

22.59964600

73.65262772

6080 WELD

7,058.4

6080

0.0

13.2

22.59969950

73.65306121

6090 WELD

7,071.6

6090

0.0

14.1

22.59973297

73.65344683

6100 WELD

7,085.7

6100

0.0

12.2

22.59970562

73.65438155

6110 WELD

7,097.9

6110

0.0

12.1

22.59971586

73.65542389

6120 WELD

7,109.9

6120

0.0

11.9

22.59976049

73.65637276

6130 WELD

7,121.8

6130

0.0

12.2

22.59980715

73.65730707

6140 WELD

7,134.0

6140

0.0

12.6

22.59985463

73.65821921

6150 WELD

7,146.6

6150

0.0

11.9

22.59991030

73.65914186

6160 WELD

7,158.5

6160

0.0

12.1

22.59998043

73.66009025

6170 WELD

7,170.6

6170

0.0

12.2

22.60004996

73.66098074

6180 WELD

7,182.8

6180

0.0

12.2

22.60013117

73.66188383

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 22 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

6190 WELD

7,195.1

6190

0.0

12.2

22.60022222

73.66278896

6200 WELD

7,207.2

6200

0.0

11.8

22.60032098

73.66368612

6210 WELD

7,219.1

6210

0.0

12.3

22.60042663

73.66457294

6220 WELD

7,231.4

6220

0.0

11.1

22.60053430

73.66543060

6230 WELD

7,242.5

6230

0.0

13.2

22.60065716

73.66631482

6240 WELD

7,255.7

6240

0.0

12.6

22.60076481

73.66710678

6250 WELD

7,268.3

6250

0.0

12.1

22.60091713

73.66803618

6260 WELD

7,280.4

6260

0.0

11.3

22.60106570

73.66891705

6270 WELD

7,291.8

6270

0.0

12.1

22.60120392

73.66974456

6280 WELD

7,303.8

6280

0.0

11.9

22.60133200

73.67051439

6290 WELD

7,315.7

6290

0.0

11.6

22.60147878

73.67132335

6300 WELD

7,327.3

6300

0.0

12.6

22.60164133

73.67213167

6310 WELD

7,339.9

6310

0.0

11.7

22.60166210

73.67267251

6320 WELD

7,351.6

6320

0.0

11.5

22.60152421

73.67288313

6330 WELD

7,363.2

6330

0.0

11.7

22.60136069

73.67300892

6340 WELD

7,374.8

6340

0.0

12.5

22.60118926

73.67311083

6350 WELD

7,387.3

6350

0.0

12.7

22.60088666

73.67285614

6360 WELD

7,400.1

6360

0.0

11.3

22.60051596

73.67239428

6370 WELD

7,411.4

6370

0.0

12.6

22.60025862

73.67176875

7,424.0

6380

0.0

0.0

22.60025451

73.67175847

6380 WELD

7,424.0

6380

0.0

6.7

22.60008208

73.67132679

6390 WELD

7,430.8

6390

0.0

13.7

22.60002514

73.67112456

6400 WELD

7,444.5

6400

0.0

13.7

22.59996273

73.67105442

6410 WELD

7,458.1

6410

0.0

11.4

22.59997206

73.67099847

6420 WELD

7,469.6

6420

0.0

11.3

22.60002453

73.67106252

6430 WELD

7,480.9

6430

0.0

12.2

22.60009044

73.67122661

6440 WELD

7,493.1

6440

0.0

11.4

22.60018693

73.67148394

6450 WELD

7,504.5

6450

0.0

11.1

22.60033017

73.67185658

6460 WELD

7,515.6

6460

0.0

12.1

22.60048940

73.67229875

6470 WELD

7,527.7

6470

0.0

12.0

22.60070508

73.67293964

11000017 WT CHANGE

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

15.90

70000

0.72

Page 23 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

6480 WELD

7,539.7

6480

0.0

10.3

22.60071468

73.67347191

6490 WELD

7,550.0

6490

0.0

11.5

22.60041938

73.67325474

6500 WELD

7,561.5

6500

0.0

11.2

22.60014201

73.67303730

6510 WELD

7,572.8

6510

0.0

11.1

22.59984237

73.67278553

6520 WELD

7,583.9

6520

0.0

11.3

22.59953455

73.67249190

6530 WELD

7,595.2

6530

0.0

11.5

22.59921982

73.67216402

6540 WELD

7,606.6

6540

0.0

11.4

22.59889978

73.67181631

6550 WELD

7,618.1

6550

0.0

11.3

22.59857221

73.67143722

6560 WELD

7,629.4

6560

0.0

11.4

22.59823462

73.67100575

6570 WELD

7,640.7

6570

0.0

11.3

22.59789670

73.67054899

6580 WELD

7,652.0

6580

0.0

11.6

22.59755722

73.67006977

6590 WELD

7,663.6

6590

0.0

11.5

22.59720961

73.66952135

6600 WELD

7,675.1

6600

0.0

11.3

22.59685522

73.66891784

6610 WELD

7,686.4

6610

0.0

11.3

22.59650286

73.66826188

6620 WELD

7,697.7

6620

0.0

11.3

22.59616044

73.66760698

6630 WELD

7,709.0

6630

0.0

12.3

22.59582441

73.66692998

6640 WELD

7,721.4

6640

0.0

11.6

22.59549669

73.66621416

6650 WELD

7,733.0

6650

0.0

11.4

22.59517147

73.66538671

6660 WELD

7,744.4

6660

0.0

11.2

22.59486741

73.66460413

6670 WELD

7,755.6

6670

0.0

11.2

22.59457971

73.66383204

6680 WELD

7,766.8

6680

0.0

11.3

22.59430455

73.66306801

6690 WELD

7,778.1

6690

0.0

11.4

22.59403662

73.66230007

6700 WELD

7,789.5

6700

0.0

11.6

22.59377581

73.66151976

6710 WELD

7,801.1

6710

0.0

13.5

22.59352559

73.66073260

6720 WELD

7,814.6

6720

0.0

11.3

22.59328531

73.65992751

6730 WELD

7,825.9

6730

0.0

11.5

22.59303149

73.65897948

6740 WELD

7,837.3

6740

0.0

11.8

22.59281042

73.65818261

6750 WELD

7,849.2

6750

0.0

11.0

22.59259813

73.65737289

6760 WELD

7,860.2

6760

0.0

11.5

22.59238890

73.65652998

6770 WELD

7,871.7

6770

0.0

11.4

22.59219614

73.65574249

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 24 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

6780 WELD

7,883.1

6780

0.0

11.8

22.59200271

73.65490956

6790 WELD

7,894.9

6790

0.0

11.8

22.59181932

73.65408510

6800 WELD

7,906.7

6800

0.0

11.3

22.59164210

73.65322377

6810 WELD

7,918.0

6810

0.0

11.2

22.59147286

73.65236190

6820 WELD

7,929.1

6820

0.0

12.0

22.59131394

73.65153363

6830 WELD

7,941.2

6830

0.0

11.9

22.59116135

73.65070617

6840 WELD

7,953.0

6840

0.0

11.3

22.59101031

73.64981211

6850 WELD

7,964.3

6850

0.0

11.4

22.59086514

73.64892610

6860 WELD

7,975.7

6860

0.0

11.9

22.59072746

73.64808210

6870 WELD

7,987.6

6870

0.0

11.3

22.59059510

73.64723224

6880 WELD

7,998.9

6880

0.0

11.8

22.59046599

73.64634137

6890 WELD

8,010.7

6890

0.0

11.4

22.59034453

73.64549691

6900 WELD

8,022.1

6900

0.0

11.2

22.59022382

73.64462475

6910 WELD

8,033.3

6910

0.0

11.7

22.59010760

73.64379323

6920 WELD

8,045.0

6920

0.0

11.6

22.58999845

73.64298120

6930 WELD

8,056.6

6930

0.0

11.4

22.58988794

73.64215060

6940 WELD

8,068.0

6940

0.0

11.5

22.58976767

73.64139169

6950 WELD

8,079.5

6950

0.0

11.3

22.58965328

73.64065393

6960 WELD

8,090.8

6960

0.0

12.1

22.58954309

73.63991799

6970 WELD

8,103.0

6970

0.0

11.4

22.58943811

73.63919839

6980 WELD

8,114.3

6980

0.0

11.7

22.58933602

73.63843832

6990 WELD

8,126.0

6990

0.0

10.7

22.58924294

73.63771815

7000 WELD

8,136.7

7000

0.0

11.7

22.58915213

73.63699421

7010 WELD

8,148.5

7010

0.0

11.0

22.58906274

73.63634180

7020 WELD

8,159.5

7020

0.0

11.1

22.58897786

73.63563492

7030 WELD

8,170.6

7030

0.0

11.3

22.58888978

73.63500201

7040 WELD

8,181.9

7040

0.0

12.6

22.58880092

73.63438586

7050 WELD

8,194.5

7050

0.0

13.7

22.58871724

73.63375383

7060 WELD

8,208.1

7060

0.0

13.7

22.58863821

73.63305841

7070 WELD

8,221.8

7070

0.0

13.5

22.58852102

73.63248604

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 25 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

7080 WELD

8,235.3

7080

0.0

11.5

22.58840735

73.63191355

7090 WELD

8,246.8

7090

0.0

11.5

22.58829817

73.63134497

7100 WELD

8,258.2

7100

0.0

14.0

22.58818833

73.63088597

7110 WELD

8,272.3

7110

0.0

12.7

22.58807802

73.63043845

7120 WELD

8,285.0

7120

0.0

13.2

22.58796677

73.62989332

7130 WELD

8,298.2

7130

0.0

11.2

22.58785561

73.62941382

7140 WELD

8,309.4

7140

0.0

11.8

22.58774366

73.62892877

7150 WELD

8,321.1

7150

0.0

11.1

22.58763432

73.62852388

7160 WELD

8,332.2

7160

0.0

11.2

22.58752282

73.62811148

7170 WELD

8,343.4

7170

0.0

11.3

22.58741480

73.62771979

7180 WELD

8,354.7

7180

0.0

11.2

22.58730636

73.62732889

7190 WELD

8,365.9

7190

0.0

11.5

22.58719907

73.62693772

7200 WELD

8,377.4

7200

0.0

11.4

22.58709324

73.62654900

7210 WELD

8,388.8

7210

0.0

11.3

22.58698687

73.62615755

7220 WELD

8,400.1

7220

0.0

11.1

22.58688322

73.62576682

7230 WELD

8,411.2

7230

0.0

11.3

22.58678270

73.62537152

7240 WELD

8,422.5

7240

0.0

11.3

22.58668335

73.62498514

7250 WELD

8,433.8

7250

0.0

12.5

22.58658716

73.62458728

7260 WELD

8,446.4

7260

0.0

12.4

22.58648231

73.62422240

7270 WELD

8,458.8

7270

0.0

11.4

22.58637766

73.62381909

7280 WELD

8,470.2

7280

0.0

11.3

22.58626916

73.62343903

7290 WELD

8,481.5

7290

0.0

14.0

22.58616876

73.62306870

7300 WELD

8,495.6

7300

0.0

13.8

22.58607561

73.62268305

7310 WELD

8,509.4

7310

0.0

13.8

22.58598785

73.62219980

7320 WELD

8,523.1

7320

0.0

11.4

22.58589827

73.62173638

7330 WELD

8,534.5

7330

0.0

13.8

22.58581536

73.62126117

7340 WELD

8,548.3

7340

0.0

12.1

22.58573590

73.62085572

7350 WELD

8,560.4

7350

0.0

11.4

22.58566350

73.62036131

7360 WELD

8,571.9

7360

0.0

11.4

22.58559637

73.61991198

7370 WELD

8,583.3

7370

0.0

11.7

22.58553379

73.61947507

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 26 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

7380 WELD

8,595.0

7380

0.0

11.4

22.58547462

73.61903533

7390 WELD

8,606.3

7390

0.0

11.3

22.58543283

73.61855074

7400 WELD

8,617.6

7400

0.0

10.2

22.58539132

73.61808101

7410 WELD

8,627.8

7410

0.0

11.4

22.58535493

73.61760614

7420 WELD

8,639.2

7420

0.0

11.7

22.58533650

73.61713187

7430 WELD

8,651.0

7430

0.0

11.3

22.58532408

73.61661293

7440 WELD

8,662.3

7440

0.0

11.1

22.58531733

73.61607992

7450 WELD

8,673.4

7450

0.0

11.7

22.58530637

73.61557268

7460 WELD

8,685.1

7460

0.0

12.0

22.58529821

73.61507164

7470 WELD

8,697.1

7470

0.0

11.3

22.58530569

73.61452946

7480 WELD

8,708.5

7480

0.0

11.3

22.58531805

73.61397578

7490 WELD

8,719.7

7490

0.0

12.0

22.58533028

73.61344752

7500 WELD

8,731.8

7500

0.0

11.1

22.58534284

73.61292587

7510 WELD

8,742.9

7510

0.0

11.2

22.58536633

73.61236939

7520 WELD

8,754.1

7520

0.0

12.3

22.58538433

73.61185310

7530 WELD

8,766.3

7530

0.0

11.8

22.58540645

73.61133340

7540 WELD

8,778.2

7540

0.0

11.6

22.58544625

73.61076078

7550 WELD

8,789.7

7550

0.0

11.2

22.58548029

73.61021436

7560 WELD

8,800.9

7560

0.0

11.2

22.58553417

73.60965081

7570 WELD

8,812.2

7570

0.0

11.1

22.58558451

73.60910618

7580 WELD

8,823.3

7580

0.0

11.5

22.58564066

73.60855822

7590 WELD

8,834.8

7590

0.0

11.3

22.58569902

73.60801458

7600 WELD

8,846.1

7600

0.0

11.3

22.58576896

73.60745180

7610 WELD

8,857.3

7610

0.0

13.9

22.58583262

73.60690696

7620 WELD

8,871.2

7620

0.0

11.7

22.58589661

73.60636721

7630 WELD

8,882.9

7630

0.0

11.2

22.58600804

73.60570077

7640 WELD

8,894.1

7640

0.0

11.1

22.58608772

73.60513888

7650 WELD

8,905.3

7650

0.0

11.4

22.58616202

73.60460207

7660 WELD

8,916.7

7660

0.0

11.8

22.58623764

73.60406978

7670 WELD

8,928.5

7670

0.0

12.0

22.58631647

73.60353094

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 27 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

7680 WELD

8,940.5

7680

0.0

11.8

22.58642103

73.60295545

7690 WELD

8,952.3

7690

0.0

11.3

22.58655569

73.60234736

7700 WELD

8,963.6

7700

0.0

11.3

22.58669332

73.60174729

7710 WELD

8,974.9

7710

0.0

11.9

22.58682739

73.60116918

7720 WELD

8,986.8

7720

0.0

13.0

22.58696436

73.60059354

7730 WELD

8,999.8

7730

0.0

10.3

22.58712218

73.59998716

7740 WELD

9,010.2

7740

0.0

12.3

22.58733911

73.59931289

7750 WELD

9,022.5

7750

0.0

11.3

22.58750605

73.59876828

7760 WELD

9,033.7

7760

0.0

10.6

22.58773344

73.59813303

7770 WELD

9,044.3

7770

0.0

11.6

22.58793765

73.59754841

7780 WELD

9,055.9

7780

0.0

14.1

22.58813232

73.59699964

7790 WELD

9,070.0

7790

0.0

13.7

22.58835959

73.59640641

7800 WELD

9,083.7

7800

0.0

13.9

22.58865775

73.59570011

7810 WELD

9,097.6

7810

0.0

13.8

22.58894942

73.59500828

7820 WELD

9,111.3

7820

0.0

13.8

22.58925253

73.59430949

7830 WELD

9,125.2

7830

0.0

11.7

22.58955842

73.59361939

7840 WELD

9,136.9

7840

0.0

11.3

22.58987119

73.59292843

7850 WELD

9,148.1

7850

0.0

11.2

22.59013015

73.59233815

7860 WELD

9,159.4

7860

0.0

12.2

22.59038313

73.59177264

7870 WELD

9,171.6

7870

0.0

11.2

22.59063943

73.59121672

7880 WELD

9,182.8

7880

0.0

11.3

22.59092974

73.59062179

7890 WELD

9,194.1

7890

0.0

11.4

22.59119538

73.59007509

7900 WELD

9,205.5

7900

0.0

11.8

22.59146877

73.58952684

7910 WELD

9,217.3

7910

0.0

11.8

22.59174795

73.58897467

7920 WELD

9,229.1

7920

0.0

11.3

22.59204363

73.58841016

7930 WELD

9,240.5

7930

0.0

11.2

22.59234462

73.58784722

7940 WELD

9,251.6

7940

0.0

13.7

22.59263443

73.58730880

7950 WELD

9,265.3

7950

0.0

11.2

22.59292211

73.58678013

7960 WELD

9,276.5

7960

0.0

11.0

22.59329387

73.58616641

7970 WELD

9,287.5

7970

0.0

12.0

22.59358913

73.58565609

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 28 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

7980 WELD

9,299.5

7980

0.0

11.4

22.59388057

73.58515282

7990 WELD

9,310.9

7990

0.0

12.4

22.59421377

73.58460142

8000 WELD

9,323.3

8000

0.0

11.1

22.59452798

73.58407947

8010 WELD

9,334.4

8010

0.0

11.2

22.59488120

73.58351939

8020 WELD

9,345.6

8020

0.0

11.2

22.59519355

73.58301676

8030 WELD

9,356.8

8030

0.0

11.6

22.59551206

73.58251573

8040 WELD

9,368.4

8040

0.0

11.3

22.59583357

73.58201826

8050 WELD

9,379.7

8050

0.0

11.5

22.59616335

73.58153411

8060 WELD

9,391.2

8060

0.0

11.5

22.59646115

73.58111579

8070 WELD

9,402.7

8070

0.0

11.4

22.59672080

73.58077350

8080 WELD

9,414.1

8080

0.0

11.2

22.59695848

73.58046941

8090 WELD

9,425.3

8090

0.0

11.2

22.59716626

73.58021099

8100 WELD

9,436.6

8100

0.0

11.5

22.59734967

73.57998625

8110 WELD

9,448.0

8110

0.0

11.1

22.59752101

73.57977937

8120 WELD

9,459.1

8120

0.0

11.5

22.59766725

73.57961140

8130 WELD

9,470.6

8130

0.0

10.9

22.59776204

73.57950445

8140 WELD

9,481.5

8140

0.0

11.0

22.59783565

73.57943021

8150 WELD

9,492.6

8150

0.0

11.4

22.59784037

73.57943003

8160 WELD

9,504.0

8160

0.0

11.1

22.59782510

73.57945488

8170 WELD

9,515.0

8170

0.0

11.3

22.59778759

73.57950970

8180 WELD

9,526.4

8180

0.0

11.3

22.59773129

73.57958188

8190 WELD

9,537.6

8190

0.0

11.3

22.59765178

73.57968352

8200 WELD

9,548.9

8200

0.0

12.2

22.59755110

73.57980821

8210 WELD

9,561.1

8210

0.0

12.5

22.59742336

73.57996301

8220 WELD

9,573.6

8220

0.0

11.7

22.59727077

73.58015919

8230 WELD

9,585.3

8230

0.0

11.5

22.59709145

73.58038909

8240 WELD

9,596.8

8240

0.0

11.1

22.59662719

73.58087234

8250 WELD

9,608.0

8250

0.0

11.0

22.59616987

73.58135403

8260 WELD

9,619.0

8260

0.0

11.2

22.59572002

73.58182775

8270 WELD

9,630.2

8270

0.0

11.3

22.59527338

73.58230280

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 29 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

8280 WELD

9,641.5

8280

0.0

11.1

22.59481566

73.58279735

8290 WELD

9,652.6

8290

0.0

11.0

22.59435418

73.58330187

8300 WELD

9,663.5

8300

0.0

11.0

22.59389599

73.58380676

8310 WELD

9,674.5

8310

0.0

11.0

22.59343792

73.58431423

8320 WELD

9,685.5

8320

0.0

11.0

22.59298119

73.58482793

8330 WELD

9,696.5

8330

0.0

11.4

22.59252228

73.58534955

8340 WELD

9,707.9

8340

0.0

11.0

22.59206057

73.58588202

8350 WELD

9,718.9

8350

0.0

11.2

22.59158502

73.58644028

8360 WELD

9,730.0

8360

0.0

11.2

22.59112411

73.58698422

8370 WELD

9,741.3

8370

0.0

11.1

22.59065552

73.58754613

8380 WELD

9,752.4

8380

0.0

11.6

22.59018479

73.58811890

8390 WELD

9,764.0

8390

0.0

11.2

22.58971958

73.58869033

8400 WELD

9,775.1

8400

0.0

11.3

22.58922450

73.58930010

8410 WELD

9,786.4

8410

0.0

11.6

22.58874315

73.58989118

8420 WELD

9,798.0

8420

0.0

11.7

22.58826009

73.59049280

8430 WELD

9,809.7

8430

0.0

11.2

22.58775897

73.59110523

8440 WELD

9,820.9

8440

0.0

11.0

22.58725795

73.59169768

8450 WELD

9,831.8

8450

0.0

11.5

22.58678168

73.59225971

8460 WELD

9,843.3

8460

0.0

11.1

22.58631778

73.59280598

8470 WELD

9,854.4

8470

0.0

11.0

22.58584183

73.59337516

8480 WELD

9,865.5

8480

0.0

11.0

22.58538263

73.59392564

8490 WELD

9,876.5

8490

0.0

11.3

22.58493259

73.59446483

8500 WELD

9,887.7

8500

0.0

11.2

22.58448803

73.59499921

8510 WELD

9,899.0

8510

0.0

10.8

22.58404219

73.59554028

8520 WELD

9,909.8

8520

0.0

10.3

22.58360179

73.59607904

8530 WELD

9,920.1

8530

0.0

11.0

22.58318036

73.59659012

8540 WELD

9,931.2

8540

0.0

11.4

22.58278129

73.59706537

8550 WELD

9,942.6

8550

0.0

11.3

22.58236561

73.59757068

8560 WELD

9,953.9

8560

0.0

11.1

22.58194503

73.59808758

8570 WELD

9,965.0

8570

0.0

11.8

22.58153485

73.59858895

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 30 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

8580 WELD

9,976.8

8580

0.0

11.4

22.58113974

73.59905822

8590 WELD

9,988.1

8590

0.0

11.2

22.58073938

73.59952493

8600 WELD

9,999.4

8600

0.0

11.1

22.58043993

73.59972495

8610 WELD

10,010.4

8610

0.0

12.2

22.58015340

73.59989828

8620 WELD

10,022.6

8620

0.0

11.3

22.57987972

73.60004558

8630 WELD

10,033.9

8630

0.0

11.4

22.57959735

73.60018848

8640 WELD

10,045.3

8640

0.0

11.6

22.57934828

73.60027330

8650 WELD

10,056.9

8650

0.0

11.2

22.57911175

73.60032565

8660 WELD

10,068.1

8660

0.0

11.3

22.57888342

73.60035358

8670 WELD

10,079.4

8670

0.0

13.7

22.57867042

73.60035517

8680 WELD

10,093.1

8680

0.0

11.1

22.57845802

73.60035371

8690 WELD

10,104.2

8690

0.0

11.3

22.57855992

73.59969174

8700 WELD

10,115.5

8700

0.0

11.1

22.57863117

73.59914692

8710 WELD

10,126.6

8710

0.0

10.7

22.57870957

73.59859032

8720 WELD

10,137.3

8720

0.0

11.2

22.57879207

73.59803625

8730 WELD

10,148.5

8730

0.0

11.0

22.57886635

73.59750936

8740 WELD

10,159.5

8740

0.0

11.2

22.57895839

73.59695060

8750 WELD

10,170.6

8750

0.0

10.9

22.57905015

73.59640072

8760 WELD

10,181.5

8760

0.0

11.1

22.57914699

73.59584459

8770 WELD

10,192.6

8770

0.0

11.4

22.57924276

73.59530050

8780 WELD

10,204.0

8780

0.0

11.2

22.57933687

73.59475976

8790 WELD

10,215.2

8790

0.0

13.8

22.57944688

73.59419420

8800 WELD

10,229.0

8800

0.0

10.3

22.57955900

73.59363473

8810 WELD

10,239.4

8810

0.0

12.2

22.57972251

73.59295510

8820 WELD

10,251.5

8820

0.0

11.6

22.57982844

73.59243408

8830 WELD

10,263.1

8830

0.0

11.4

22.57998286

73.59181591

8840 WELD

10,274.5

8840

0.0

11.3

22.58014213

73.59121123

8850 WELD

10,285.8

8850

0.0

11.1

22.58030329

73.59061493

8860 WELD

10,296.8

8860

0.0

11.5

22.58047753

73.59001089

8870 WELD

10,308.4

8870

0.0

11.1

22.58066446

73.58940656

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 31 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

8880 WELD

10,319.5

8880

0.0

11.6

22.58088094

73.58876843

8890 WELD

10,331.1

8890

0.0

13.5

22.58109411

73.58815018

8900 WELD

10,344.5

8900

0.0

13.5

22.58133441

73.58750180

8910 WELD

10,358.0

8910

0.0

13.5

22.58163258

73.58675988

8920 WELD

10,371.5

8920

0.0

10.4

22.58194079

73.58601819

8930 WELD

10,381.9

8930

0.0

11.3

22.58225668

73.58527609

8940 WELD

10,393.1

8940

0.0

11.0

22.58248569

73.58469373

8950 WELD

10,404.2

8950

0.0

11.2

22.58274466

73.58406875

8960 WELD

10,415.3

8960

0.0

11.3

22.58300031

73.58345809

8970 WELD

10,426.6

8970

0.0

12.1

22.58326623

73.58284094

8980 WELD

10,438.7

8980

0.0

13.8

22.58354005

73.58222100

8990 WELD

10,452.5

8990

0.0

11.5

22.58384238

73.58156297

9000 WELD

10,464.0

9000

0.0

11.3

22.58421169

73.58081888

9010 WELD

10,475.3

9010

0.0

11.3

22.58451475

73.58019099

9020 WELD

10,486.6

9020

0.0

12.2

22.58482028

73.57957393

9030 WELD

10,498.8

9030

0.0

11.4

22.58513054

73.57895844

9040 WELD

10,510.3

9040

0.0

13.1

22.58547849

73.57830385

9050 WELD

10,523.4

9050

0.0

11.5

22.58580761

73.57768870

9060 WELD

10,534.9

9060

0.0

13.3

22.58620321

73.57699573

9070 WELD

10,548.2

9070

0.0

11.4

22.58654612

73.57638817

9080 WELD

10,559.6

9080

0.0

11.1

22.58696252

73.57569396

9090 WELD

10,570.7

9090

0.0

11.3

22.58731415

73.57509811

9100 WELD

10,582.0

9100

0.0

11.1

22.58766320

73.57452278

9110 WELD

10,593.1

9110

0.0

11.3

22.58802270

73.57394049

9120 WELD

10,604.4

9120

0.0

10.9

22.58837783

73.57337217

9130 WELD

10,615.3

9130

0.0

11.0

22.58874427

73.57279888

9140 WELD

10,626.3

9140

0.0

11.8

22.58910264

73.57224315

9150 WELD

10,638.1

9150

0.0

11.2

22.58946703

73.57168770

9160 WELD

10,649.3

9160

0.0

11.3

22.58986585

73.57110075

9170 WELD

10,660.6

9170

0.0

11.7

22.59024760

73.57054146

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 32 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

9180 WELD

10,672.3

9180

0.0

11.3

22.59063790

73.56998254

9190 WELD

10,683.6

9190

0.0

11.2

22.59104588

73.56941374

9200 WELD

10,694.8

9200

0.0

11.4

22.59144213

73.56886532

9210 WELD

10,706.2

9210

0.0

11.1

22.59183665

73.56832983

9220 WELD

10,717.3

9220

0.0

11.8

22.59224084

73.56779589

9230 WELD

10,729.1

9230

0.0

12.0

22.59263741

73.56727972

9240 WELD

10,741.1

9240

0.0

12.0

22.59305631

73.56675963

9250 WELD

10,753.1

9250

0.0

11.4

22.59348339

73.56624484

9260 WELD

10,764.5

9260

0.0

11.0

22.59388574

73.56578114

9270 WELD

10,775.6

9270

0.0

10.7

22.59424043

73.56537974

9280 WELD

10,786.3

9280

0.0

11.0

22.59440257

73.56521401

9290 WELD

10,797.3

9290

0.0

12.1

22.59454200

73.56506918

9300 WELD

10,809.4

9300

0.0

13.8

22.59467953

73.56493198

9310 WELD

10,823.2

9310

0.0

11.4

22.59483040

73.56479556

9320 WELD

10,834.6

9320

0.0

11.0

22.59501009

73.56465332

9330 WELD

10,845.6

9330

0.0

11.3

22.59513118

73.56454074

9340 WELD

10,856.9

9340

0.0

11.1

22.59523348

73.56444295

9350 WELD

10,868.0

9350

0.0

10.9

22.59532552

73.56435965

9360 WELD

10,878.9

9360

0.0

11.4

22.59541063

73.56428115

9370 WELD

10,890.3

9370

0.0

13.1

22.59549227

73.56420444

9380 WELD

10,903.4

9380

0.0

11.4

22.59556974

73.56413831

9390 WELD

10,914.8

9390

0.0

11.1

22.59564770

73.56409472

9400 WELD

10,926.0

9400

0.0

11.1

22.59569615

73.56405802

9410 WELD

10,937.0

9410

0.0

11.6

22.59573576

73.56402691

9420 WELD

10,948.7

9420

0.0

11.2

22.59576953

73.56400071

9430 WELD

10,959.9

9430

0.0

11.4

22.59578923

73.56399558

9440 WELD

10,971.2

9440

0.0

11.5

22.59578882

73.56400465

9450 WELD

10,982.7

9450

0.0

11.4

22.59577618

73.56402771

9460 WELD

10,994.2

9460

0.0

11.5

22.59571024

73.56410327

9470 WELD

11,005.6

9470

0.0

11.5

22.59549018

73.56431895

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 33 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

9480 WELD

11,017.1

9480

0.0

11.9

22.59524346

73.56456004

9490 WELD

11,029.0

9490

0.0

11.5

22.59495523

73.56484002

9500 WELD

11,040.5

9500

0.0

11.4

22.59461630

73.56517082

9510 WELD

11,051.9

9510

0.0

11.1

22.59426711

73.56550810

9520 WELD

11,063.0

9520

0.0

11.0

22.59368263

73.56602279

9530 WELD

11,074.0

9530

0.0

11.6

22.59310439

73.56653248

9540 WELD

11,085.5

9540

0.0

11.4

22.59252879

73.56704438

9550 WELD

11,097.0

9550

0.0

11.4

22.59191507

73.56759990

9560 WELD

11,108.4

9560

0.0

11.4

22.59130187

73.56815895

9570 WELD

11,119.8

9570

0.0

11.0

22.59068564

73.56872494

9580 WELD

11,130.8

9580

0.0

11.2

22.59005268

73.56930104

9590 WELD

11,142.1

9590

0.0

11.2

22.58943943

73.56985792

9600 WELD

11,153.3

9600

0.0

11.0

22.58881619

73.57042707

9610 WELD

11,164.4

9610

0.0

11.4

22.58819427

73.57099765

9620 WELD

11,175.7

9620

0.0

10.6

22.58758521

73.57156049

9630 WELD

11,186.3

9630

0.0

11.3

22.58696378

73.57213938

9640 WELD

11,197.6

9640

0.0

14.0

22.58638653

73.57266797

9650 WELD

11,211.7

9650

0.0

11.2

22.58578090

73.57322971

9660 WELD

11,222.9

9660

0.0

11.3

22.58505781

73.57393271

9670 WELD

11,234.2

9670

0.0

11.2

22.58447411

73.57447570

9680 WELD

11,245.5

9680

0.0

11.5

22.58389833

73.57500879

9690 WELD

11,256.9

9690

0.0

11.2

22.58333599

73.57552668

9700 WELD

11,268.2

9700

0.0

11.2

22.58277085

73.57605411

9710 WELD

11,279.4

9710

0.0

11.0

22.58222293

73.57656495

9720 WELD

11,290.3

9720

0.0

10.9

22.58168893

73.57705870

9730 WELD

11,301.3

9730

0.0

14.2

22.58116828

73.57754191

9740 WELD

11,315.5

9740

0.0

11.2

22.58066075

73.57800979

9750 WELD

11,326.7

9750

0.0

11.4

22.58005305

73.57858644

9760 WELD

11,338.1

9760

0.0

13.5

22.57956489

73.57902285

9770 WELD

11,351.6

9770

0.0

11.4

22.57909211

73.57943189

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 34 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

9780 WELD

11,363.0

9780

0.0

11.3

22.57856342

73.57990226

9790 WELD

11,374.3

9790

0.0

11.2

22.57812616

73.58025491

9800 WELD

11,385.4

9800

0.0

13.4

22.57788191

73.58027310

9810 WELD

11,398.9

9810

0.0

13.9

22.57765939

73.58025786

9820 WELD

11,412.7

9820

0.0

13.9

22.57741627

73.58023715

9830 WELD

11,426.6

9830

0.0

11.4

22.57718208

73.58019486

9840 WELD

11,438.0

9840

0.0

11.1

22.57696987

73.58011658

9850 WELD

11,449.2

9850

0.0

11.3

22.57679044

73.58002918

9860 WELD

11,460.5

9860

0.0

8.9

22.57663690

73.57990536

9870 WELD

11,469.4

9870

0.0

10.8

22.57649186

73.57976544

9880 WELD

11,480.3

9880

0.0

10.9

22.57637387

73.57962427

9890 WELD

11,491.2

9890

0.0

11.4

22.57625495

73.57945235

9900 WELD

11,502.6

9900

0.0

11.7

22.57613623

73.57927893

9910 WELD

11,514.3

9910

0.0

13.9

22.57602630

73.57908405

9920 WELD

11,528.2

9920

0.0

11.0

22.57592180

73.57887602

9930 WELD

11,539.2

9930

0.0

13.9

22.57581921

73.57862997

9940 WELD

11,553.1

9940

0.0

13.7

22.57572562

73.57841898

9950 WELD

11,566.8

9950

0.0

11.0

22.57562651

73.57816756

9960 WELD

11,577.8

9960

0.0

10.9

22.57552703

73.57792133

9970 WELD

11,588.7

9970

0.0

11.5

22.57544029

73.57770089

9980 WELD

11,600.1

9980

0.0

11.0

22.57537854

73.57744637

9990 WELD

11,611.1

9990

0.0

11.3

22.57541063

73.57705451

10000 WELD

11,622.5

10000

0.0

13.7

22.57553632

73.57655617

10010 WELD

11,636.2

10010

0.0

13.9

22.57568171

73.57603157

10020 WELD

11,650.0

10020

0.0

13.8

22.57587235

73.57541558

10030 WELD

11,663.9

10030

0.0

10.5

22.57607583

73.57478692

10040 WELD

11,674.3

10040

0.0

11.0

22.57628978

73.57415330

10050 WELD

11,685.3

10050

0.0

11.2

22.57643375

73.57366210

10060 WELD

11,696.5

10060

0.0

10.9

22.57659483

73.57314674

10070 WELD

11,707.4

10070

0.0

11.2

22.57676795

73.57261819

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 35 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

10080 WELD

11,718.6

10080

0.0

11.2

22.57693595

73.57210329

10090 WELD

11,729.7

10090

0.0

11.9

22.57712114

73.57156835

10100 WELD

11,741.6

10100

0.0

11.3

22.57731446

73.57102984

10110 WELD

11,753.0

10110

0.0

11.2

22.57754812

73.57044290

10120 WELD

11,764.1

10120

0.0

10.9

22.57778691

73.56986693

10130 WELD

11,775.1

10130

0.0

11.7

22.57803465

73.56929103

10140 WELD

11,786.8

10140

0.0

11.1

22.57827842

73.56872758

10150 WELD

11,797.9

10150

0.0

12.1

22.57859851

73.56809494

10160 WELD

11,810.1

10160

0.0

11.5

22.57891510

73.56748550

10170 WELD

11,821.6

10170

0.0

11.2

22.57926868

73.56683051

10180 WELD

11,832.8

10180

0.0

12.3

22.57960993

73.56620593

10190 WELD

11,845.1

10190

0.0

11.9

22.57994398

73.56559791

10200 WELD

11,857.0

10200

0.0

11.2

22.58032799

73.56493740

10210 WELD

11,868.2

10210

0.0

10.9

22.58068363

73.56430573

10220 WELD

11,879.2

10220

0.0

11.2

22.58101679

73.56371021

10230 WELD

11,890.3

10230

0.0

12.0

22.58134681

73.56312745

10240 WELD

11,902.3

10240

0.0

11.4

22.58168830

73.56253600

10250 WELD

11,913.7

10250

0.0

10.6

22.58206602

73.56190890

10260 WELD

11,924.3

10260

0.0

11.2

22.58242806

73.56131075

10270 WELD

11,935.5

10270

0.0

11.4

22.58276374

73.56075197

10280 WELD

11,946.9

10280

0.0

10.6

22.58313453

73.56016334

10290 WELD

11,957.5

10290

0.0

11.3

22.58351660

73.55956776

10300 WELD

11,968.8

10300

0.0

11.3

22.58387383

73.55901070

10310 WELD

11,980.1

10310

0.0

11.6

22.58425706

73.55842734

10320 WELD

11,991.6

10320

0.0

11.2

22.58464566

73.55784594

10330 WELD

12,002.8

10330

0.0

6.2

22.58507305

73.55726274

10340 WELD

12,009.0

10340

0.0

11.3

22.58548849

73.55669562

10350 WELD

12,020.3

10350

0.0

11.0

22.58569050

73.55635168

10360 WELD

12,031.2

10360

0.0

11.1

22.58611643

73.55578666

10370 WELD

12,042.3

10370

0.0

13.1

22.58653249

73.55524163

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 36 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

10380 WELD

12,055.4

10380

0.0

11.5

22.58695763

73.55469239

10390 WELD

12,066.9

10390

0.0

11.1

22.58747485

73.55406033

10400 WELD

12,078.0

10400

0.0

11.4

22.58792746

73.55350214

10410 WELD

12,089.5

10410

0.0

11.2

22.58836768

73.55296444

10420 WELD

12,100.7

10420

0.0

11.2

22.58882536

73.55241937

10430 WELD

12,111.9

10430

0.0

10.8

22.58927647

73.55188777

10440 WELD

12,122.7

10440

0.0

11.8

22.58972961

73.55136312

10450 WELD

12,134.5

10450

0.0

10.9

22.59016774

73.55085631

10460 WELD

12,145.4

10460

0.0

11.4

22.59065440

73.55031442

10470 WELD

12,156.8

10470

0.0

11.1

22.59110538

73.54980806

10480 WELD

12,167.9

10480

0.0

11.1

22.59158161

73.54928687

10490 WELD

12,179.1

10490

0.0

11.6

22.59204890

73.54877933

10500 WELD

12,190.6

10500

0.0

11.2

22.59252130

73.54827198

10510 WELD

12,201.8

10510

0.0

10.9

22.59284341

73.54798281

10520 WELD

12,212.8

10520

0.0

11.0

22.59313840

73.54771820

10530 WELD

12,223.8

10530

0.0

12.4

22.59342189

73.54746366

10540 WELD

12,236.1

10540

0.0

11.0

22.59370913

73.54720853

10550 WELD

12,247.1

10550

0.0

13.1

22.59402675

73.54694586

10560 WELD

12,260.2

10560

0.0

11.2

22.59430714

73.54670151

10570 WELD

12,271.5

10570

0.0

10.8

22.59465394

73.54642581

10580 WELD

12,282.3

10580

0.0

11.6

22.59494000

73.54618356

10590 WELD

12,293.9

10590

0.0

11.1

22.59520257

73.54595925

10600 WELD

12,305.0

10600

0.0

11.2

22.59546954

73.54574416

10610 WELD

12,316.2

10610

0.0

11.0

22.59570404

73.54555290

10620 WELD

12,327.2

10620

0.0

11.5

22.59593658

73.54536602

10630 WELD

12,338.7

10630

0.0

12.5

22.59608766

73.54524811

10640 WELD

12,351.2

10640

0.0

11.3

22.59617153

73.54519235

10650 WELD

12,362.5

10650

0.0

11.2

22.59625345

73.54515040

10660 WELD

12,373.7

10660

0.0

12.4

22.59631855

73.54510788

10670 WELD

12,386.0

10670

0.0

11.1

22.59637713

73.54506899

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 37 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

10680 WELD

12,397.2

10680

0.0

10.9

22.59643867

73.54504195

10690 WELD

12,408.1

10690

0.0

11.3

22.59648120

73.54501535

10700 WELD

12,419.4

10700

0.0

11.1

22.59652247

73.54498735

10710 WELD

12,430.5

10710

0.0

11.8

22.59655723

73.54496929

10720 WELD

12,442.3

10720

0.0

13.2

22.59658325

73.54495554

10730 WELD

12,455.5

10730

0.0

11.1

22.59660327

73.54495485

10740 WELD

12,466.6

10740

0.0

11.9

22.59660929

73.54498144

10750 WELD

12,478.5

10750

0.0

11.5

22.59660739

73.54498989

10760 WELD

12,490.0

10760

0.0

11.2

22.59659633

73.54501410

10770 WELD

12,501.1

10770

0.0

11.3

22.59657437

73.54504226

10780 WELD

12,512.5

10780

0.0

11.3

22.59655092

73.54506806

10790 WELD

12,523.8

10790

0.0

11.5

22.59651750

73.54510332

10800 WELD

12,535.3

10800

0.0

11.6

22.59649533

73.54512964

10810 WELD

12,546.9

10810

0.0

12.4

22.59645209

73.54517420

10820 WELD

12,559.3

10820

0.0

12.5

22.59635474

73.54526157

10830 WELD

12,571.8

10830

0.0

11.5

22.59618901

73.54541017

10840 WELD

12,583.3

10840

0.0

11.2

22.59598922

73.54558507

10850 WELD

12,594.5

10850

0.0

11.3

22.59578503

73.54575219

10860 WELD

12,605.8

10860

0.0

14.0

22.59556086

73.54593091

10870 WELD

12,619.8

10870

0.0

11.4

22.59530431

73.54613541

10880 WELD

12,631.2

10880

0.0

13.8

22.59491817

73.54647006

10890 WELD

12,645.0

10890

0.0

11.7

22.59458253

73.54673702

10900 WELD

12,656.8

10900

0.0

11.4

22.59415380

73.54710576

10910 WELD

12,668.2

10910

0.0

11.4

22.59374471

73.54743539

10920 WELD

12,679.6

10920

0.0

11.1

22.59322660

73.54784054

10930 WELD

12,690.7

10930

0.0

11.5

22.59268265

73.54826749

10940 WELD

12,702.2

10940

0.0

11.3

22.59214049

73.54869372

10950 WELD

12,713.5

10950

0.0

11.4

22.59154350

73.54916933

10960 WELD

12,724.9

10960

0.0

10.9

22.59092046

73.54966312

10970 WELD

12,735.8

10970

0.0

11.2

22.59026412

73.55018819

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 38 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

10980 WELD

12,747.1

10980

0.0

11.8

22.58961977

73.55070321

10990 WELD

12,758.8

10990

0.0

13.8

22.58895731

73.55124360

11000 WELD

12,772.7

11000

0.0

11.0

22.58825342

73.55182965

11010 WELD

12,783.6

11010

0.0

11.3

22.58741998

73.55255386

11020 WELD

12,794.9

11020

0.0

13.7

22.58673979

73.55312564

11030 WELD

12,808.6

11030

0.0

11.4

22.58603820

73.55372602

11040 WELD

12,820.0

11040

0.0

11.3

22.58518570

73.55449287

11050 WELD

12,831.3

11050

0.0

10.6

22.58445665

73.55513166

11060 WELD

12,841.9

11060

0.0

11.2

22.58372405

73.55577526

11070 WELD

12,853.2

11070

0.0

11.4

22.58302995

73.55638579

11080 WELD

12,864.6

11080

0.0

10.9

22.58229373

73.55704410

11090 WELD

12,875.5

11090

0.0

11.0

22.58165634

73.55749294

11100 WELD

12,886.5

11100

0.0

11.2

22.58105774

73.55790858

11110 WELD

12,897.7

11110

0.0

11.9

22.58046655

73.55832034

11120 WELD

12,909.6

11120

0.0

10.9

22.57988116

73.55872646

11130 WELD

12,920.5

11130

0.0

11.1

22.57927308

73.55915560

11140 WELD

12,931.6

11140

0.0

13.2

22.57872086

73.55953651

11150 WELD

12,944.8

11150

0.0

10.2

22.57817670

73.55990680

11160 WELD

12,955.1

11160

0.0

11.5

22.57757264

73.56032610

11170 WELD

12,966.6

11170

0.0

11.3

22.57711213

73.56060788

11000018 WT CHANGE

12,977.9

11180

0.0

12.6

22.57710413

73.56061289

11180 WELD

12,977.9

11180

0.0

12.6

22.57661669

73.56091802

11190 WELD

12,990.5

11190

0.0

12.2

22.57596358

73.56159322

13,002.7

11200

0.0

0.0

22.57596939

73.56158443

11200 WELD

13,002.7

11200

0.0

10.9

22.57655711

73.56069454

11210 WELD

13,013.6

11210

0.0

11.2

22.57704646

73.56007307

11220 WELD

13,024.8

11220

0.0

11.9

22.57748020

73.55951334

11230 WELD

13,036.7

11230

0.0

14.1

22.57793310

73.55893918

11240 WELD

13,050.8

11240

0.0

10.6

22.57842999

73.55832731

11250 WELD

13,061.4

11250

0.0

11.3

22.57902027

73.55764343

11000019 WT CHANGE

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

23.80

70000

0.72

15.90

70000

0.72

Page 39 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

11260 WELD

13,072.7

11260

0.0

11.3

22.57945363

73.55711051

11270 WELD

13,084.0

11270

0.0

11.7

22.57993160

73.55654054

11280 WELD

13,095.6

11280

0.0

12.0

22.58041458

73.55597044

11290 WELD

13,107.6

11290

0.0

14.0

22.58092630

73.55537903

11300 WELD

13,121.6

11300

0.0

13.8

22.58146382

73.55476965

11310 WELD

13,135.4

11310

0.0

10.7

22.58211276

73.55406782

11320 WELD

13,146.1

11320

0.0

11.5

22.58274252

73.55340160

11330 WELD

13,157.6

11330

0.0

14.0

22.58322486

73.55286606

11340 WELD

13,171.6

11340

0.0

13.9

22.58375600

73.55229381

11350 WELD

13,185.5

11350

0.0

11.3

22.58442786

73.55161016

11360 WELD

13,196.8

11360

0.0

11.4

22.58511024

73.55092526

11370 WELD

13,208.2

11370

0.0

11.3

22.58566392

73.55035146

11380 WELD

13,219.5

11380

0.0

11.6

22.58622322

73.54978294

11390 WELD

13,231.1

11390

0.0

11.5

22.58678823

73.54921492

11400 WELD

13,242.6

11400

0.0

13.8

22.58737788

73.54863288

11410 WELD

13,256.4

11410

0.0

11.5

22.58794330

73.54808435

11420 WELD

13,267.9

11420

0.0

11.4

22.58864973

73.54743588

11430 WELD

13,279.3

11430

0.0

11.3

22.58921116

73.54691050

11440 WELD

13,290.5

11440

0.0

11.3

22.58977776

73.54638567

11450 WELD

13,301.9

11450

0.0

13.4

22.59031402

73.54589726

11460 WELD

13,315.3

11460

0.0

11.5

22.59086405

73.54540300

11470 WELD

13,326.7

11470

0.0

13.3

22.59150624

73.54486070

11480 WELD

13,340.1

11480

0.0

11.3

22.59203089

73.54440797

11490 WELD

13,351.4

11490

0.0

11.5

22.59266175

73.54389080

11500 WELD

13,362.9

11500

0.0

13.6

22.59317792

73.54345678

11510 WELD

13,376.5

11510

0.0

13.5

22.59371103

73.54301497

11520 WELD

13,390.0

11520

0.0

11.2

22.59431921

73.54254504

11530 WELD

13,401.2

11530

0.0

11.1

22.59493475

73.54207380

11540 WELD

13,412.3

11540

0.0

13.1

22.59544657

73.54166526

11550 WELD

13,425.4

11550

0.0

10.2

22.59596311

73.54125625

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 40 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

11560 WELD

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

13,435.6

11560

0.0

11.2

22.59659976

73.54078152

13,446.8

11570

0.0

0.0

22.59660716

73.54077566

11570 WELD

13,446.8

11570

0.0

5.8

22.59709408

73.54039013

10000003 Bend right

13,449.4

11570

1.3

4.5

22.59709497

73.54038945

11000021 WT CHANGE

11000020 WT CHANGE

13,452.3

11570

0.0

0.3

22.59709776

73.54038733

11580 WELD

13,452.7

11580

0.0

7.6

22.59765250

73.53996522

11590 WELD

13,460.3

11590

0.0

11.3

22.59776393

73.53982749

11600 WELD

13,471.6

11600

0.0

12.8

22.59792786

73.53967183

11610 WELD

13,484.4

11610

0.0

11.4

22.59820239

73.53947822

11620 WELD

13,495.8

11620

0.0

11.2

22.59848617

73.53929664

11630 WELD

13,507.0

11630

0.0

13.8

22.59871581

73.53913980

11640 WELD

13,520.8

11640

0.0

11.0

22.59895047

73.53897782

11000022 WT CHANGE

13,531.8

11650

0.0

0.0

22.59895836

73.53897311

11650 WELD

13,531.8

11650

0.0

12.0

22.59925843

73.53879386

11660 WELD

13,543.8

11660

0.0

12.3

22.59950058

73.53862653

11670 WELD

13,556.2

11670

0.0

12.5

22.59955054

73.53860862

11680 WELD

13,568.7

11680

0.0

12.5

22.59961872

73.53858118

11690 WELD

13,581.2

11690

0.0

12.1

22.59945872

73.53871430

11700 WELD

13,593.3

11700

0.0

12.3

22.59919222

73.53892064

11710 WELD

13,605.7

11710

0.0

12.4

22.59845719

73.53943385

11720 WELD

13,618.1

11720

0.0

12.3

22.59764029

73.54001128

11730 WELD

13,630.4

11730

0.0

12.4

22.59674805

73.54065052

11740 WELD

13,642.8

11740

0.0

12.3

22.59568257

73.54141087

11750 WELD

13,655.1

11750

0.0

12.6

22.59635684

73.54066509

11760 WELD

13,667.7

11760

0.0

12.2

22.59504799

73.54154231

11000023 WT CHANGE

13,679.9

11770

0.0

12.1

22.59503952

73.54154808

11770 WELD

13,679.9

11770

0.0

12.1

22.59371866

73.54244712

11780 WELD

13,692.0

11780

0.0

14.1

22.59244424

73.54331650

11790 WELD

13,706.0

11790

0.0

3.4

22.59121216

73.54416873

11800 WELD

13,709.4

11800

0.0

7.2

22.58983121

73.54515332

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

23.80

70000

0.72

15.90

70000

0.72

23.80

70000

0.72

15.90

70000

0.72

12:00

Page 41 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

11000024 WT CHANGE

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

13,716.5

11810

0.0

0.0

22.58982587

73.54515587

11810 WELD

13,716.6

11810

0.0

8.2

22.58946056

73.54532976

10000004 Bend right

13,721.3

11810

2.2

5.9

22.58945899

73.54533078

11000025 WT CHANGE

13,724.7

11820

0.0

0.0

22.58945485

73.54533346

11820 WELD

13,724.7

11820

0.0

11.0

22.58874225

73.54579527

11830 WELD

13,735.7

11830

0.0

11.5

22.58803428

73.54623002

11840 WELD

13,747.1

11840

0.0

11.4

22.58714485

73.54680967

11850 WELD

13,758.5

11850

0.0

8.4

22.58623248

73.54741806

11860 WELD

13,767.0

11860

0.0

14.0

22.58536303

73.54799546

11870 WELD

13,781.0

11870

0.0

11.4

22.58471596

73.54839912

11880 WELD

13,792.4

11880

0.0

13.9

22.58369705

73.54911789

11890 WELD

13,806.2

11890

0.0

11.8

22.58290428

73.54964891

11900 WELD

13,818.0

11900

0.0

11.5

22.58201062

73.55026199

11910 WELD

13,829.5

11910

0.0

12.1

22.58125721

73.55076603

11920 WELD

13,841.6

11920

0.0

11.2

22.58055739

73.55122315

11930 WELD

13,852.7

11930

0.0

11.4

22.57983960

73.55170052

11940 WELD

13,864.1

11940

0.0

11.4

22.57918152

73.55213223

11950 WELD

13,875.5

11950

0.0

11.4

22.57854322

73.55254447

11960 WELD

13,886.9

11960

0.0

11.5

22.57791712

73.55295004

11970 WELD

13,898.4

11970

0.0

13.4

22.57729960

73.55335180

11980 WELD

13,911.8

11980

0.0

11.6

22.57668530

73.55375419

11990 WELD

13,923.3

11990

0.0

14.0

22.57599567

73.55422560

12000 WELD

13,937.3

12000

0.0

11.8

22.57539947

73.55461912

12010 WELD

13,949.1

12010

0.0

11.2

22.57470536

73.55510221

12020 WELD

13,960.4

12020

0.0

11.2

22.57412133

73.55549138

12030 WELD

13,971.5

12030

0.0

13.3

22.57359488

73.55582125

12040 WELD

13,984.8

12040

0.0

13.7

22.57307818

73.55614434

12050 WELD

13,998.5

12050

0.0

13.9

22.57248655

73.55653490

12060 WELD

14,012.4

12060

0.0

11.6

22.57189062

73.55693137

12070 WELD

14,024.1

12070

0.0

11.0

22.57133763

73.55727250

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

23.80

70000

0.72

15.90

70000

0.72

12:00

Page 42 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

12080 WELD

14,035.0

12080

0.0

3.9

22.57087182

73.55754077

12090 WELD

14,038.9

12090

0.0

5.1

22.57043444

73.55778555

12100 WELD

14,044.0

12100

0.0

10.2

22.57023606

73.55782817

12110 WELD

14,054.2

12110

0.0

11.1

22.56999750

73.55790495

12120 WELD

14,065.3

12120

0.0

11.6

22.56959263

73.55812304

12130 WELD

14,076.9

12130

0.0

11.3

22.56920095

73.55831205

12140 WELD

14,088.2

12140

0.0

11.4

22.56879716

73.55851041

12150 WELD

14,099.6

12150

0.0

12.3

22.56840791

73.55869700

12160 WELD

14,111.9

12160

0.0

11.5

22.56801890

73.55888309

12170 WELD

14,123.5

12170

0.0

11.2

22.56760940

73.55908496

12180 WELD

14,134.7

12180

0.0

11.4

22.56722557

73.55926621

12190 WELD

14,146.1

12190

0.0

11.2

22.56687682

73.55940534

12200 WELD

14,157.4

12200

0.0

11.3

22.56652754

73.55954417

12210 WELD

14,168.6

12210

0.0

11.5

22.56618528

73.55967718

12220 WELD

14,180.1

12220

0.0

13.3

22.56584537

73.55980778

12230 WELD

14,193.4

12230

0.0

11.4

22.56550439

73.55993842

12240 WELD

14,204.8

12240

0.0

11.2

22.56512324

73.56009708

12250 WELD

14,216.0

12250

0.0

13.5

22.56479031

73.56022028

12260 WELD

14,229.5

12260

0.0

11.3

22.56446519

73.56033715

12270 WELD

14,240.8

12270

0.0

11.2

22.56409177

73.56048737

12280 WELD

14,252.0

12280

0.0

14.0

22.56379559

73.56056273

12290 WELD

14,266.0

12290

0.0

13.8

22.56350264

73.56063515

12300 WELD

14,279.7

12300

0.0

11.3

22.56315924

73.56073711

12310 WELD

14,291.0

12310

0.0

11.2

22.56282302

73.56083325

12320 WELD

14,302.2

12320

0.0

11.5

22.56253679

73.56089831

12330 WELD

14,313.7

12330

0.0

11.6

22.56225435

73.56096020

12340 WELD

14,325.3

12340

0.0

11.1

22.56196738

73.56102380

12350 WELD

14,336.3

12350

0.0

11.4

22.56168082

73.56108618

12360 WELD

14,347.8

12360

0.0

11.2

22.56140499

73.56114142

12370 WELD

14,358.9

12370

0.0

11.4

22.56112530

73.56119795

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 43 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

12380 WELD

14,370.3

12380

0.0

11.4

22.56085181

73.56125003

12390 WELD

14,381.7

12390

0.0

11.2

22.56057601

73.56130250

12400 WELD

14,392.9

12400

0.0

11.4

22.56030095

73.56135362

12410 WELD

14,404.3

12410

0.0

11.7

22.56003154

73.56140070

12420 WELD

14,415.9

12420

0.0

11.5

22.55976061

73.56144772

12430 WELD

14,427.4

12430

0.0

11.3

22.55948648

73.56149554

12440 WELD

14,438.7

12440

0.0

11.2

22.55921722

73.56153979

12450 WELD

14,449.9

12450

0.0

11.1

22.55895279

73.56158058

12460 WELD

14,461.0

12460

0.0

11.4

22.55869067

73.56161927

12470 WELD

14,472.4

12470

0.0

11.4

22.55843121

73.56165572

12480 WELD

14,483.7

12480

0.0

11.7

22.55816905

73.56169270

12490 WELD

14,495.4

12490

0.0

13.9

22.55790853

73.56172797

12500 WELD

14,509.2

12500

0.0

13.8

22.55764448

73.56176415

12510 WELD

14,523.0

12510

0.0

13.1

22.55736973

73.56178009

12520 WELD

14,536.2

12520

0.0

11.0

22.55709686

73.56179402

12530 WELD

14,547.2

12530

0.0

11.0

22.55683541

73.56180256

12540 WELD

14,558.2

12540

0.0

11.1

22.55661622

73.56178088

12550 WELD

14,569.3

12550

0.0

11.7

22.55640921

73.56174072

12560 WELD

14,581.0

12560

0.0

10.9

22.55620157

73.56169998

12570 WELD

14,591.9

12570

0.0

10.6

22.55598776

73.56165934

12580 WELD

14,602.5

12580

0.0

11.1

22.55578428

73.56161669

12590 WELD

14,613.6

12590

0.0

11.1

22.55559806

73.56155154

12600 WELD

14,624.7

12600

0.0

11.2

22.55542131

73.56146387

12610 WELD

14,636.0

12610

0.0

11.7

22.55525869

73.56135468

12620 WELD

14,647.6

12620

0.0

11.8

22.55511633

73.56121310

12630 WELD

14,659.5

12630

0.0

11.2

22.55499790

73.56102834

12640 WELD

14,670.7

12640

0.0

13.8

22.55489562

73.56081719

12650 WELD

14,684.4

12650

0.0

9.3

22.55482875

73.56056528

12660 WELD

14,693.7

12660

0.0

12.0

22.55482251

73.56018664

12670 WELD

14,705.7

12670

0.0

11.4

22.55481656

73.55988102

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 44 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

12680 WELD

14,717.1

12680

0.0

14.2

22.55488331

73.55943518

12690 WELD

14,731.3

12690

0.0

11.2

22.55498278

73.55895840

12700 WELD

14,742.5

12700

0.0

12.6

22.55471811

73.55938414

12710 WELD

14,755.1

12710

0.0

11.1

22.55445808

73.55975432

12720 WELD

14,766.2

12720

0.0

11.5

22.55413937

73.56022715

12730 WELD

14,777.7

12730

0.0

11.8

22.55381505

73.56068369

12740 WELD

14,789.5

12740

0.0

11.1

22.55343304

73.56122201

12750 WELD

14,800.6

12750

0.0

11.3

22.55301845

73.56180909

12760 WELD

14,811.9

12760

0.0

12.0

22.55259646

73.56239423

12770 WELD

14,823.9

12770

0.0

11.2

22.55212967

73.56303725

12780 WELD

14,835.1

12780

0.0

11.5

22.55161521

73.56375265

12790 WELD

14,846.6

12790

0.0

11.1

22.55110512

73.56444363

12800 WELD

14,857.6

12800

0.0

11.4

22.55086085

73.56446517

12810 WELD

14,869.1

12810

0.0

11.5

22.55066046

73.56442025

12820 WELD

14,880.6

12820

0.0

11.5

22.55050677

73.56429168

12830 WELD

14,892.1

12830

0.0

4.9

22.55040034

73.56408568

12840 WELD

14,896.9

12840

0.0

11.5

22.55034229

73.56380445

12850 WELD

14,908.5

12850

0.0

11.9

22.55029161

73.56362502

12860 WELD

14,920.4

12860

0.0

11.8

22.55034382

73.56318057

12870 WELD

14,932.2

12870

0.0

11.5

22.55073253

73.56247180

12880 WELD

14,943.6

12880

0.0

11.2

22.55109678

73.56183128

12890 WELD

14,954.9

12890

0.0

11.3

22.55143361

73.56125029

12900 WELD

14,966.2

12900

0.0

11.0

22.55174405

73.56072494

12910 WELD

14,977.2

12910

0.0

11.5

22.55203638

73.56024304

12920 WELD

14,988.7

12920

0.0

11.5

22.55229402

73.55982380

12930 WELD

15,000.2

12930

0.0

11.2

22.55253571

73.55944661

12940 WELD

15,011.4

12940

0.0

11.7

22.55275091

73.55911817

12950 WELD

15,023.1

12950

0.0

13.5

22.55292673

73.55885251

12960 WELD

15,036.6

12960

0.0

14.1

22.55307889

73.55863607

12970 WELD

15,050.6

12970

0.0

12.5

22.55320719

73.55848869

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 45 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

12980 WELD

15,063.2

12980

0.0

11.6

22.55253625

73.55937445

12990 WELD

15,074.8

12990

0.0

11.4

22.55190192

73.56016776

13000 WELD

15,086.2

13000

0.0

11.3

22.55130773

73.56087979

13010 WELD

15,097.5

13010

0.0

11.5

22.55073209

73.56154906

13020 WELD

15,109.0

13020

0.0

12.4

22.55017638

73.56217267

13030 WELD

15,121.4

13030

0.0

12.4

22.54964263

73.56274482

13040 WELD

15,133.8

13040

0.0

11.1

22.54910993

73.56329028

13050 WELD

15,144.9

13050

0.0

11.7

22.54863442

73.56372202

13060 WELD

15,156.6

13060

0.0

11.4

22.54895129

73.56294153

13070 WELD

15,168.0

13070

0.0

11.4

22.54933412

73.56209463

13080 WELD

15,179.4

13080

0.0

11.2

22.54972162

73.56126550

13090 WELD

15,190.6

13090

0.0

11.4

22.55013353

73.56043371

13100 WELD

15,202.0

13100

0.0

11.5

22.55054908

73.55962404

13110 WELD

15,213.5

13110

0.0

11.0

22.55097734

73.55882806

13120 WELD

15,224.4

13120

0.0

10.9

22.55140594

73.55806836

13130 WELD

15,235.3

13130

0.0

11.3

22.55112328

73.55847281

13140 WELD

15,246.6

13140

0.0

14.0

22.55077916

73.55895637

13150 WELD

15,260.6

13150

0.0

6.3

22.55037797

73.55952194

13160 WELD

15,266.9

13160

0.0

11.3

22.54985163

73.56030015

13170 WELD

15,278.2

13170

0.0

11.5

22.54956736

73.56062928

13180 WELD

15,289.7

13180

0.0

11.2

22.54909244

73.56129743

13190 WELD

15,300.9

13190

0.0

11.3

22.54858667

73.56200930

15,312.3

13200

0.0

12.6

22.54807320

73.56272591

13200 WELD

15,312.3

13200

0.0

12.6

22.54807320

73.56272591

13210 WELD

15,324.9

13210

0.0

12.4

22.54813281

73.56226864

13220 WELD

15,337.3

13220

0.0

12.6

22.54802912

73.56203938

15,349.8

13230

0.0

0.0

22.54802765

73.56202838

13230 WELD

15,349.9

13230

0.0

9.8

22.54798614

73.56171958

13240 WELD

15,359.6

13240

0.0

11.2

22.54807337

73.56120555

13250 WELD

15,370.9

13250

0.0

11.5

22.54814372

73.56076745

11000026 WT CHANGE

11000027 WT CHANGE

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

25.00

70000

0.72

15.90

70000

0.72

Page 46 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

13260 WELD

15,382.4

13260

0.0

11.3

22.54823517

73.56027595

13270 WELD

15,393.7

13270

0.0

11.2

22.54833927

73.55976424

13280 WELD

15,404.9

13280

0.0

11.4

22.54843924

73.55926434

13290 WELD

15,416.3

13290

0.0

11.3

22.54853210

73.55877929

13300 WELD

15,427.6

13300

0.0

11.4

22.54862685

73.55829065

13310 WELD

15,438.9

13310

0.0

11.3

22.54873905

73.55778237

13320 WELD

15,450.2

13320

0.0

12.5

22.54885134

73.55727543

13330 WELD

15,462.7

13330

0.0

10.8

22.54896084

73.55677663

13340 WELD

15,473.5

13340

0.0

14.1

22.54909014

73.55623241

13350 WELD

15,487.5

13350

0.0

2.5

22.54920098

73.55574523

13360 WELD

15,490.1

13360

0.0

10.0

22.54936710

73.55513303

13370 WELD

15,500.0

13370

0.0

11.8

22.54933501

73.55497524

13380 WELD

15,511.8

13380

0.0

11.5

22.54944350

73.55451117

13390 WELD

15,523.3

13390

0.0

11.3

22.54960497

73.55395127

13400 WELD

15,534.6

13400

0.0

13.7

22.54975855

73.55341034

13410 WELD

15,548.3

13410

0.0

13.8

22.54990872

73.55287870

13420 WELD

15,562.1

13420

0.0

11.3

22.55013263

73.55222050

13430 WELD

15,573.5

13430

0.0

11.4

22.55038877

73.55152793

13440 WELD

15,584.9

13440

0.0

11.2

22.55058436

73.55095449

13450 WELD

15,596.0

13450

0.0

11.0

22.55078230

73.55037950

13460 WELD

15,607.1

13460

0.0

11.0

22.55100818

73.54978263

13470 WELD

15,618.0

13470

0.0

11.2

22.55123070

73.54919514

13480 WELD

15,629.2

13480

0.0

11.2

22.55145057

73.54861556

13490 WELD

15,640.4

13490

0.0

11.2

22.55167649

73.54802854

13500 WELD

15,651.6

13500

0.0

10.9

22.55190086

73.54744743

13510 WELD

15,662.5

13510

0.0

11.2

22.55212688

73.54686655

13520 WELD

15,673.7

13520

0.0

12.3

22.55234427

73.54630358

13530 WELD

15,686.0

13530

0.0

11.2

22.55256748

73.54573349

13540 WELD

15,697.3

13540

0.0

11.2

22.55282030

73.54511593

13550 WELD

15,708.5

13550

0.0

11.3

22.55304463

73.54454994

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 47 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

13560 WELD

15,719.8

13560

0.0

14.0

22.55326745

73.54398931

13570 WELD

15,733.8

13570

0.0

11.0

22.55349279

73.54342715

15,744.8

13580

0.0

0.0

22.55349673

73.54341842

13580 WELD

15,744.8

13580

0.0

11.4

22.55380522

73.54273449

13590 WELD

15,756.2

13590

0.0

13.7

22.55403295

73.54218360

13600 WELD

15,769.9

13600

0.0

12.3

22.55354766

73.54271508

15,782.1

13610

0.0

0.0

22.55354064

73.54272287

13610 WELD

15,782.1

13610

0.0

11.2

22.55291551

73.54341650

13620 WELD

15,793.3

13620

0.0

10.7

22.55232457

73.54405343

13630 WELD

15,804.0

13630

0.0

11.3

22.55177320

73.54463329

13640 WELD

15,815.3

13640

0.0

11.1

22.55123892

73.54518780

13650 WELD

15,826.3

13650

0.0

11.0

22.55068002

73.54578132

13660 WELD

15,837.3

13660

0.0

11.1

22.55012507

73.54636546

13670 WELD

15,848.4

13670

0.0

11.2

22.54957593

73.54694789

13680 WELD

15,859.6

13680

0.0

12.6

22.54902509

73.54753879

13690 WELD

15,872.1

13690

0.0

12.8

22.54847359

73.54813691

13700 WELD

15,885.0

13700

0.0

11.9

22.54786507

73.54882132

13710 WELD

15,896.9

13710

0.0

11.4

22.54724900

73.54952461

13720 WELD

15,908.3

13720

0.0

11.3

22.54667301

73.55017904

13730 WELD

15,919.6

13730

0.0

10.8

22.54612120

73.55080597

13740 WELD

15,930.4

13740

0.0

11.3

22.54557677

73.55142901

13750 WELD

15,941.7

13750

0.0

11.9

22.54505431

73.55202073

13760 WELD

15,953.6

13760

0.0

10.9

22.54451273

73.55264686

13770 WELD

15,964.5

13770

0.0

11.6

22.54394913

73.55331269

13780 WELD

15,976.1

13780

0.0

11.2

22.54342950

73.55391375

13790 WELD

15,987.3

13790

0.0

11.5

22.54288204

73.55456306

13800 WELD

15,998.8

13800

0.0

12.1

22.54235500

73.55518855

13810 WELD

16,010.9

13810

0.0

11.0

22.54181882

73.55582835

13820 WELD

16,021.9

13820

0.0

3.0

22.54126253

73.55650662

13830 WELD

16,024.9

13830

0.0

13.8

22.54075358

73.55711199

11000028 WT CHANGE

11000029 WT CHANGE

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

25.00

70000

0.72

15.90

70000

0.72

Page 48 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

13840 WELD

16,038.7

13840

0.0

12.1

22.54055848

73.55723732

13850 WELD

16,050.8

13850

0.0

8.9

22.53994535

73.55800554

13860 WELD

16,059.7

13860

0.0

11.5

22.53940216

73.55867149

13870 WELD

16,071.2

13870

0.0

11.3

22.53898520

73.55914652

13880 WELD

16,082.5

13880

0.0

11.2

22.53847176

73.55977822

13890 WELD

16,093.7

13890

0.0

11.2

22.53797017

73.56039763

13900 WELD

16,104.9

13900

0.0

11.1

22.53747447

73.56101397

13910 WELD

16,116.0

13910

0.0

11.2

22.53698168

73.56163193

13920 WELD

16,127.2

13920

0.0

11.3

22.53649725

73.56224250

13930 WELD

16,138.5

13930

0.0

13.7

22.53601182

73.56286096

13940 WELD

16,152.2

13940

0.0

12.5

22.53552528

73.56348763

13950 WELD

16,164.6

13950

0.0

8.3

22.53495820

73.56425716

13960 WELD

16,172.9

13960

0.0

11.2

22.53443991

73.56495260

13970 WELD

16,184.1

13970

0.0

11.1

22.53407010

73.56539841

16,195.2

13980

0.0

0.0

22.53406431

73.56540594

13980 WELD

16,195.2

13980

0.0

12.6

22.53360483

73.56600337

13990 WELD

16,207.8

13990

0.0

12.4

22.53314743

73.56660098

16,220.2

14000

0.0

0.0

22.53314716

73.56658998

14000 WELD

16,220.2

14000

0.0

10.6

22.53313710

73.56618571

14010 WELD

16,230.9

14010

0.0

9.4

22.53318133

73.56568379

14020 WELD

16,240.3

14020

0.0

11.4

22.53320702

73.56524992

14030 WELD

16,251.7

14030

0.0

11.5

22.53321975

73.56486357

14040 WELD

16,263.2

14040

0.0

11.7

22.53325214

73.56440746

14050 WELD

16,274.9

14050

0.0

10.7

22.53330585

73.56391745

14060 WELD

16,285.6

14060

0.0

13.9

22.53336123

73.56342359

14070 WELD

16,299.5

14070

0.0

13.8

22.53340515

73.56296855

14080 WELD

16,313.3

14080

0.0

14.0

22.53348467

73.56239945

14090 WELD

16,327.3

14090

0.0

11.9

22.53356212

73.56183901

14100 WELD

16,339.2

14100

0.0

11.2

22.53364137

73.56127457

14110 WELD

16,350.4

14110

0.0

11.3

22.53369649

73.56078937

11000030 WT CHANGE

11000031 WT CHANGE

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

25.00

70000

0.72

15.90

70000

0.72

Page 49 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

14120 WELD

16,361.7

14120

0.0

11.3

22.53374264

73.56033421

14130 WELD

16,372.9

14130

0.0

11.3

22.53378951

73.55987783

14140 WELD

16,384.2

14140

0.0

11.8

22.53383563

73.55942495

14150 WELD

16,396.0

14150

0.0

11.2

22.53388188

73.55897270

14160 WELD

16,407.2

14160

0.0

12.2

22.53393261

73.55850724

14170 WELD

16,419.4

14170

0.0

11.1

22.53397670

73.55806383

14180 WELD

16,430.5

14180

0.0

11.4

22.53404780

73.55756354

14190 WELD

16,441.9

14190

0.0

13.3

22.53411950

73.55708657

14200 WELD

16,455.2

14200

0.0

12.2

22.53419453

73.55660181

14210 WELD

16,467.4

14210

0.0

11.2

22.53429537

73.55604657

14220 WELD

16,478.6

14220

0.0

11.9

22.53438051

73.55553701

14230 WELD

16,490.5

14230

0.0

13.7

22.53446623

73.55504818

14240 WELD

16,504.2

14240

0.0

13.6

22.53456251

73.55453317

14250 WELD

16,517.8

14250

0.0

11.2

22.53468493

73.55395143

14260 WELD

16,529.0

14260

0.0

11.1

22.53480459

73.55337924

14270 WELD

16,540.2

14270

0.0

11.0

22.53488965

73.55289941

14280 WELD

16,551.2

14280

0.0

11.3

22.53497247

73.55242690

14290 WELD

16,562.5

14290

0.0

11.3

22.53505398

73.55195922

14300 WELD

16,573.8

14300

0.0

10.8

22.53513843

73.55148538

14310 WELD

16,584.6

14310

0.0

11.1

22.53522306

73.55101245

14320 WELD

16,595.7

14320

0.0

10.5

22.53530003

73.55056057

16,606.1

14330

0.0

0.0

22.53530163

73.55055145

16,606.2

14330

0.0

12.3

22.53538008

73.55010206

11000032 WT CHANGE
14330 WELD
11000033 WT CHANGE

16,618.4

14340

0.0

0.0

22.53538184

73.55009132

14340 WELD

16,618.5

14340

0.0

10.5

22.53545136

73.54966716

14350 WELD

16,629.0

14350

0.0

13.4

22.53555571

73.54915853

14360 WELD

16,642.4

14360

0.0

11.3

22.53564575

73.54870278

14370 WELD

16,653.7

14370

0.0

11.1

22.53578177

73.54813893

14380 WELD

16,664.8

14380

0.0

14.1

22.53589580

73.54764450

14390 WELD

16,678.9

14390

0.0

11.3

22.53600695

73.54715842

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

25.00

70000

0.72

15.90

70000

0.72

Page 50 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

14400 WELD

16,690.2

14400

0.0

10.9

22.53616895

73.54655831

14410 WELD

16,701.1

14410

0.0

13.8

22.53628219

73.54607118

14420 WELD

16,714.9

14420

0.0

11.6

22.53638898

73.54560025

14430 WELD

16,726.4

14430

0.0

11.3

22.53654312

73.54502428

14440 WELD

16,737.7

14440

0.0

11.3

22.53666002

73.54453401

14450 WELD

16,749.0

14450

0.0

11.3

22.53677177

73.54405680

14460 WELD

16,760.2

14460

0.0

13.6

22.53688294

73.54358235

14470 WELD

16,773.9

14470

0.0

11.1

22.53699388

73.54310985

14480 WELD

16,785.0

14480

0.0

11.3

22.53719101

73.54250040

14490 WELD

16,796.3

14490

0.0

11.4

22.53733684

73.54199687

14500 WELD

16,807.7

14500

0.0

11.9

22.53748780

73.54148502

14510 WELD

16,819.6

14510

0.0

11.2

22.53763944

73.54097379

14520 WELD

16,830.8

14520

0.0

11.4

22.53780158

73.54044371

14530 WELD

16,842.1

14530

0.0

11.8

22.53794797

73.53994683

14540 WELD

16,853.9

14540

0.0

12.0

22.53809833

73.53944395

14550 WELD

16,866.0

14550

0.0

11.1

22.53825668

73.53892724

14560 WELD

16,877.1

14560

0.0

10.5

22.53841934

73.53840407

14570 WELD

16,887.6

14570

0.0

11.7

22.53856387

73.53791807

14580 WELD

16,899.3

14580

0.0

11.7

22.53869665

73.53745653

14590 WELD

16,910.9

14590

0.0

11.0

22.53885117

73.53695447

14600 WELD

16,922.0

14600

0.0

11.9

22.53900612

73.53645331

14610 WELD

16,933.9

14610

0.0

11.4

22.53914813

73.53597868

14620 WELD

16,945.3

14620

0.0

11.8

22.53930625

73.53547481

14630 WELD

16,957.1

14630

0.0

11.3

22.53945461

73.53499118

14640 WELD

16,968.5

14640

0.0

11.1

22.53961091

73.53449406

14650 WELD

16,979.5

14650

0.0

12.9

22.53975727

73.53401734

14660 WELD

16,992.5

14660

0.0

11.2

22.53989818

73.53355235

14670 WELD

17,003.7

14670

0.0

11.1

22.54007408

73.53302304

14680 WELD

17,014.8

14680

0.0

11.7

22.54021719

73.53255688

14690 WELD

17,026.5

14690

0.0

11.3

22.54035720

73.53209783

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 51 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

14700 WELD

17,037.8

14700

0.0

12.3

22.54050888

73.53161838

14710 WELD

17,050.1

14710

0.0

11.3

22.54065182

73.53115652

14720 WELD

17,061.4

14720

0.0

11.1

22.54081399

73.53066042

14730 WELD

17,072.5

14730

0.0

11.8

22.54095724

73.53020065

14740 WELD

17,084.3

14740

0.0

11.1

22.54109464

73.52975286

14750 WELD

17,095.3

14750

0.0

10.7

22.54124547

73.52928164

14760 WELD

17,106.1

14760

0.0

11.1

22.54138228

73.52883730

14770 WELD

17,117.2

14770

0.0

10.9

22.54151245

73.52840617

14780 WELD

17,128.1

14780

0.0

10.9

22.54164966

73.52796327

14790 WELD

17,139.0

14790

0.0

10.9

22.54178189

73.52753049

14800 WELD

17,149.9

14800

0.0

10.9

22.54191698

73.52709586

14810 WELD

17,160.9

14810

0.0

11.0

22.54206327

73.52665182

14820 WELD

17,171.8

14820

0.0

13.6

22.54221933

73.52620075

14830 WELD

17,185.4

14830

0.0

11.0

22.54238585

73.52574120

14840 WELD

17,196.4

14840

0.0

11.4

22.54262280

73.52517873

14850 WELD

17,207.8

14850

0.0

11.4

22.54281238

73.52470285

14860 WELD

17,219.2

14860

0.0

11.4

22.54302681

73.52420128

14870 WELD

17,230.6

14870

0.0

14.0

22.54325941

73.52368782

14880 WELD

17,244.6

14880

0.0

11.3

22.54351088

73.52316198

14890 WELD

17,255.9

14890

0.0

11.3

22.54384984

73.52252578

14900 WELD

17,267.3

14900

0.0

11.3

22.54412989

73.52198783

14910 WELD

17,278.6

14910

0.0

11.5

22.54442747

73.52144227

14920 WELD

17,290.1

14920

0.0

14.0

22.54457668

73.52127603

14930 WELD

17,304.2

14930

0.0

11.2

22.54467065

73.52118100

14940 WELD

17,315.4

14940

0.0

11.5

22.54475095

73.52113790

14950 WELD

17,326.8

14950

0.0

11.3

22.54478394

73.52110972

14960 WELD

17,338.1

14960

0.0

10.9

22.54478865

73.52111716

14970 WELD

17,349.0

14970

0.0

12.3

22.54476599

73.52115311

14980 WELD

17,361.3

14980

0.0

11.4

22.54470292

73.52122648

14990 WELD

17,372.7

14990

0.0

11.2

22.54456917

73.52106265

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 52 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

15000 WELD

17,383.8

15000

0.0

11.2

22.54446383

73.52087989

15010 WELD

17,395.0

15010

0.0

11.1

22.54437046

73.52068700

15020 WELD

17,406.1

15020

0.0

11.3

22.54431653

73.52045216

15030 WELD

17,417.4

15030

0.0

11.1

22.54428478

73.52019454

15040 WELD

17,428.4

15040

0.0

11.2

22.54427282

73.51991509

15050 WELD

17,439.6

15050

0.0

13.6

22.54428129

73.51961832

15060 WELD

17,453.3

15060

0.0

13.9

22.54430232

73.51930768

15070 WELD

17,467.2

15070

0.0

10.6

22.54436133

73.51892666

15080 WELD

17,477.8

15080

0.0

12.6

22.54444631

73.51851791

15090 WELD

17,490.4

15090

0.0

12.3

22.54417607

73.51853583

15100 WELD

17,502.7

15100

0.0

13.7

22.54395780

73.51846329

15110 WELD

17,516.4

15110

0.0

14.0

22.54376553

73.51836480

15120 WELD

17,530.4

15120

0.0

11.3

22.54355978

73.51826290

15130 WELD

17,541.7

15130

0.0

11.5

22.54335086

73.51815982

15140 WELD

17,553.2

15140

0.0

11.2

22.54318607

73.51804401

15150 WELD

17,564.4

15150

0.0

11.8

22.54302025

73.51792750

15160 WELD

17,576.2

15160

0.0

11.5

22.54285643

73.51781171

15170 WELD

17,587.6

15170

0.0

11.2

22.54268826

73.51769368

15180 WELD

17,598.8

15180

0.0

11.3

22.54252269

73.51757665

15190 WELD

17,610.2

15190

0.0

11.4

22.54235971

73.51746064

15200 WELD

17,621.5

15200

0.0

11.4

22.54219567

73.51734393

15210 WELD

17,632.9

15210

0.0

11.0

22.54203153

73.51722698

15220 WELD

17,643.9

15220

0.0

10.6

22.54186707

73.51710967

15230 WELD

17,654.5

15230

0.0

10.9

22.54170604

73.51699382

15240 WELD

17,665.5

15240

0.0

11.3

22.54154884

73.51687965

15250 WELD

17,676.8

15250

0.0

11.3

22.54138895

73.51676401

15260 WELD

17,688.1

15260

0.0

11.3

22.54122564

73.51664651

15270 WELD

17,699.4

15270

0.0

11.3

22.54108300

73.51650582

15280 WELD

17,710.7

15280

0.0

11.5

22.54094060

73.51636531

15290 WELD

17,722.2

15290

0.0

11.3

22.54079828

73.51622484

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 53 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

15300 WELD

17,733.5

15300

0.0

11.4

22.54065437

73.51608284

15310 WELD

17,744.9

15310

0.0

11.2

22.54051165

73.51594190

15320 WELD

17,756.1

15320

0.0

10.8

22.54036859

73.51580062

15330 WELD

17,766.9

15330

0.0

11.2

22.54022707

73.51566073

15340 WELD

17,778.1

15340

0.0

13.0

22.54008811

73.51552318

15350 WELD

17,791.1

15350

0.0

11.4

22.53994657

73.51538318

15360 WELD

17,802.6

15360

0.0

12.3

22.53979276

73.51523171

15370 WELD

17,814.9

15370

0.0

11.6

22.53964948

73.51509001

15380 WELD

17,826.5

15380

0.0

11.3

22.53950055

73.51494299

15390 WELD

17,837.7

15390

0.0

11.4

22.53935620

73.51480022

15400 WELD

17,849.2

15400

0.0

11.3

22.53921417

73.51465957

15410 WELD

17,860.4

15410

0.0

11.4

22.53907111

73.51451792

15420 WELD

17,871.8

15420

0.0

11.2

22.53892915

73.51437726

15430 WELD

17,883.0

15430

0.0

10.9

22.53878662

73.51423603

15440 WELD

17,893.8

15440

0.0

11.2

22.53864535

73.51409595

15450 WELD

17,905.0

15450

0.0

11.3

22.53850622

73.51395783

11000034 WT CHANGE

17,916.3

15460

0.0

0.0

22.53849941

73.51395108

15460 WELD

17,916.3

15460

0.0

3.6

22.53836473

73.51381749

15470 WELD

17,919.9

15470

0.0

12.5

22.53822274

73.51367662

15480 WELD

17,932.4

15480

0.0

12.4

22.53802990

73.51374650

15490 WELD

17,944.8

15490

0.0

12.3

22.53816240

73.51331756

15500 WELD

17,957.1

15500

0.0

12.4

22.53852683

73.51283650

15510 WELD

17,969.6

15510

0.0

12.4

22.53877478

73.51255636

15520 WELD

17,982.0

15520

0.0

12.5

22.53896499

73.51235739

15530 WELD

17,994.4

15530

0.0

12.3

22.53906467

73.51226957

15540 WELD

18,006.7

15540

0.0

12.3

22.53919482

73.51184694

15550 WELD

18,019.0

15550

0.0

12.1

22.53933098

73.51142247

15560 WELD

18,031.1

15560

0.0

12.3

22.53967596

73.51099508

15570 WELD

18,043.4

15570

0.0

12.4

22.54003480

73.51053848

15580 WELD

18,055.8

15580

0.0

12.4

22.54040189

73.51007624

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

23.80

70000

0.72

Page 54 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

15590 WELD

18,068.3

15590

0.0

12.4

22.54076897

73.50962413

15600 WELD

18,080.7

15600

0.0

11.9

22.54113895

73.50917123

15610 WELD

18,092.6

15610

0.0

12.4

22.54150473

73.50873187

15620 WELD

18,104.9

15620

0.0

12.4

22.54163446

73.50860732

15630 WELD

18,117.3

15630

0.0

12.3

22.54170736

73.50855388

15640 WELD

18,129.6

15640

0.0

12.4

22.54117900

73.50893918

15650 WELD

18,142.0

15650

0.0

12.5

22.54157432

73.50839743

15660 WELD

18,154.5

15660

0.0

12.2

22.54174086

73.50823814

15670 WELD

18,166.7

15670

0.0

12.3

22.54187647

73.50811694

15680 WELD

18,179.1

15680

0.0

12.3

22.54196217

73.50804834

15690 WELD

18,191.4

15690

0.0

12.4

22.54201716

73.50801454

15700 WELD

18,203.8

15700

0.0

6.1

22.54150229

73.50843217

15710 WELD

18,209.9

15710

0.0

13.3

22.54098168

73.50885308

15720 WELD

18,223.3

15720

0.0

11.5

22.54069001

73.50902367

15730 WELD

18,234.8

15730

0.0

12.4

22.54012017

73.50946371

15740 WELD

18,247.2

15740

0.0

12.2

22.53974344

73.50959922

15750 WELD

18,259.4

15750

0.0

12.5

22.53938904

73.50969134

15760 WELD

18,271.9

15760

0.0

12.4

22.53902956

73.50979428

15770 WELD

18,284.3

15770

0.0

12.4

22.53871435

73.50983640

15780 WELD

18,296.7

15780

0.0

12.6

22.53840241

73.50987686

15790 WELD

18,309.2

15790

0.0

12.2

22.53875593

73.50944682

15800 WELD

18,321.5

15800

0.0

12.4

22.53899870

73.50918848

15810 WELD

18,333.9

15810

0.0

12.4

22.53916796

73.50901929

15820 WELD

18,346.3

15820

0.0

12.4

22.53930180

73.50889584

15830 WELD

18,358.6

15830

0.0

12.4

22.53938552

73.50882893

15840 WELD

18,371.0

15840

0.0

12.3

22.53945057

73.50878328

15850 WELD

18,383.3

15850

0.0

12.4

22.53948888

73.50876707

15860 WELD

18,395.7

15860

0.0

12.3

22.53945191

73.50882890

15870 WELD

18,408.1

15870

0.0

12.5

22.53905659

73.50897238

15880 WELD

18,420.6

15880

0.0

2.7

22.53946088

73.50840707

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 55 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

15890 WELD

18,423.3

15890

0.0

12.4

22.53942462

73.50847153

15900 WELD

18,435.7

15900

0.0

12.2

22.53936520

73.50843009

15910 WELD

18,447.9

15910

0.0

2.5

22.53882761

73.50885793

15920 WELD

18,450.4

15920

0.0

12.5

22.53830265

73.50928368

15930 WELD

18,462.9

15930

0.0

12.4

22.53814284

73.50931448

15940 WELD

18,475.2

15940

0.0

12.3

22.53760062

73.50973370

15950 WELD

18,487.6

15950

0.0

12.3

22.53706273

73.51014538

15960 WELD

18,499.9

15960

0.0

12.5

22.53652900

73.51055573

15970 WELD

18,512.4

15970

0.0

12.4

22.53600527

73.51093263

15980 WELD

18,524.7

15980

0.0

12.4

22.53548521

73.51129501

15990 WELD

18,537.2

15990

0.0

12.5

22.53497691

73.51164049

16000 WELD

18,549.7

16000

0.0

12.4

22.53465654

73.51169934

16010 WELD

18,562.1

16010

0.0

12.4

22.53491316

73.51116230

16020 WELD

18,574.5

16020

0.0

12.4

22.53521901

73.51059706

16030 WELD

18,586.9

16030

0.0

12.4

22.53559844

73.51001045

16040 WELD

18,599.3

16040

0.0

12.5

22.53599273

73.50943335

16050 WELD

18,611.8

16050

0.0

12.3

22.53545949

73.50985331

16060 WELD

18,624.1

16060

0.0

12.4

22.53528609

73.50973130

16070 WELD

18,636.5

16070

0.0

12.3

22.53556203

73.50919189

16080 WELD

18,648.8

16080

0.0

12.4

22.53594036

73.50860950

16090 WELD

18,661.2

16090

0.0

12.2

22.53632464

73.50803417

16100 WELD

18,673.3

16100

0.0

12.3

22.53671492

73.50745521

16110 WELD

18,685.7

16110

0.0

12.4

22.53710423

73.50688987

16120 WELD

18,698.1

16120

0.0

12.3

22.53750776

73.50632711

16130 WELD

18,710.4

16130

0.0

12.4

22.53791699

73.50576557

16140 WELD

18,722.8

16140

0.0

12.5

22.53811759

73.50556347

16150 WELD

18,735.3

16150

0.0

12.5

22.53828963

73.50539686

16160 WELD

18,747.8

16160

0.0

12.3

22.53777018

73.50583521

16170 WELD

18,760.1

16170

0.0

12.3

22.53724170

73.50627722

16180 WELD

18,772.4

16180

0.0

12.4

22.53674102

73.50671193

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 56 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

16190 WELD

18,784.8

16190

0.0

12.4

22.53621970

73.50714845

16200 WELD

18,797.1

16200

0.0

12.3

22.53568252

73.50758083

16210 WELD

18,809.5

16210

0.0

12.4

22.53514385

73.50798927

16220 WELD

18,821.9

16220

0.0

12.3

22.53463607

73.50832023

16230 WELD

18,834.3

16230

0.0

12.4

22.53433516

73.50834946

16240 WELD

18,846.7

16240

0.0

12.4

22.53437959

73.50800203

16250 WELD

18,859.0

16250

0.0

12.8

22.53475523

73.50741479

16260 WELD

18,871.8

16260

0.0

12.1

22.53513955

73.50683128

16270 WELD

18,883.9

16270

0.0

12.0

22.53551632

73.50623505

16280 WELD

18,895.9

16280

0.0

10.5

22.53585180

73.50567379

16290 WELD

18,906.4

16290

0.0

12.4

22.53621746

73.50511001

16300 WELD

18,918.9

16300

0.0

12.4

22.53653587

73.50460869

16310 WELD

18,931.3

16310

0.0

12.3

22.53695141

73.50405991

16320 WELD

18,943.6

16320

0.0

12.5

22.53706228

73.50396520

16330 WELD

18,956.1

16330

0.0

12.5

22.53714702

73.50389744

16340 WELD

18,968.6

16340

0.0

12.3

22.53699720

73.50407135

16350 WELD

18,980.9

16350

0.0

12.3

22.53668622

73.50438706

16360 WELD

18,993.2

16360

0.0

13.1

22.53633531

73.50447125

16370 WELD

19,006.3

16370

0.0

11.6

22.53602849

73.50450191

16380 WELD

19,017.9

16380

0.0

12.3

22.53573435

73.50450573

16390 WELD

19,030.2

16390

0.0

12.0

22.53550294

73.50445920

16400 WELD

19,042.2

16400

0.0

12.4

22.53526196

73.50441376

16410 WELD

19,054.6

16410

0.0

12.6

22.53533059

73.50405574

16420 WELD

19,067.1

16420

0.0

12.5

22.53542368

73.50367042

16430 WELD

19,079.6

16430

0.0

12.4

22.53582708

73.50317359

16440 WELD

19,092.0

16440

0.0

12.4

22.53528069

73.50358900

16450 WELD

19,104.4

16450

0.0

11.2

22.53473757

73.50400403

16460 WELD

19,115.7

16460

0.0

13.4

22.53426385

73.50426244

16470 WELD

19,129.1

16470

0.0

12.4

22.53386665

73.50443397

16480 WELD

19,141.5

16480

0.0

12.6

22.53346109

73.50457643

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 57 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

16490 WELD

19,154.0

16490

0.0

12.4

22.53336118

73.50437586

16500 WELD

19,166.4

16500

0.0

12.4

22.53335823

73.50407465

16510 WELD

19,178.9

16510

0.0

12.5

22.53349246

73.50365087

16520 WELD

19,191.3

16520

0.0

11.2

22.53389192

73.50307974

16530 WELD

19,202.6

16530

0.0

13.5

22.53417808

73.50276516

16540 WELD

19,216.1

16540

0.0

12.3

22.53439844

73.50251722

16550 WELD

19,228.4

16550

0.0

12.5

22.53388798

73.50298468

16560 WELD

19,240.9

16560

0.0

12.3

22.53336617

73.50341645

16570 WELD

19,253.2

16570

0.0

12.5

22.53283261

73.50385519

16580 WELD

19,265.7

16580

0.0

12.3

22.53229908

73.50426933

16590 WELD

19,278.0

16590

0.0

12.4

22.53185863

73.50448356

16600 WELD

19,290.4

16600

0.0

12.5

22.53160680

73.50445354

16610 WELD

19,302.9

16610

0.0

12.1

22.53142020

73.50434696

16620 WELD

19,315.0

16620

0.0

12.6

22.53142212

73.50404023

16630 WELD

19,327.6

16630

0.0

12.5

22.53152032

73.50364912

16640 WELD

19,340.1

16640

0.0

11.4

22.53168691

73.50348534

16650 WELD

19,351.5

16650

0.0

13.3

22.53173281

73.50346168

16660 WELD

19,364.8

16660

0.0

12.3

22.53140449

73.50378273

16670 WELD

19,377.0

16670

0.0

12.7

22.53096243

73.50422003

16680 WELD

19,389.7

16680

0.0

12.3

22.53051815

73.50463985

16690 WELD

19,402.0

16690

0.0

12.3

22.52999143

73.50500783

16700 WELD

19,414.3

16700

0.0

12.6

22.52950769

73.50530742

16710 WELD

19,426.9

16710

0.0

12.4

22.52903091

73.50559632

16720 WELD

19,439.3

16720

0.0

12.1

22.52865887

73.50572175

16730 WELD

19,451.5

16730

0.0

12.5

22.52902662

73.50524584

16740 WELD

19,464.0

16740

0.0

12.3

22.52937112

73.50481024

16750 WELD

19,476.3

16750

0.0

12.4

22.52971302

73.50439317

16760 WELD

19,488.6

16760

0.0

12.3

22.52982231

73.50429191

16770 WELD

19,500.9

16770

0.0

12.4

22.52953079

73.50460500

16780 WELD

19,513.3

16780

0.0

12.4

22.52920115

73.50495062

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 58 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

16790 WELD

19,525.7

16790

0.0

12.3

22.52880350

73.50535162

16800 WELD

19,538.0

16800

0.0

12.4

22.52838205

73.50577158

16810 WELD

19,550.4

16810

0.0

12.4

22.52785444

73.50617219

16820 WELD

19,562.8

16820

0.0

12.0

22.52734089

73.50653756

16830 WELD

19,574.7

16830

0.0

12.0

22.52684019

73.50687972

16840 WELD

19,586.7

16840

0.0

12.2

22.52637263

73.50717472

16850 WELD

19,598.9

16850

0.0

12.0

22.52593128

73.50742729

16860 WELD

19,610.9

16860

0.0

12.4

22.52552906

73.50761387

16870 WELD

19,623.3

16870

0.0

12.2

22.52514523

73.50777842

16880 WELD

19,635.5

16880

0.0

12.3

22.52477915

73.50791129

16890 WELD

19,647.9

16890

0.0

12.4

22.52444314

73.50800570

16900 WELD

19,660.3

16900

0.0

12.5

22.52412899

73.50806822

16910 WELD

19,672.8

16910

0.0

12.4

22.52450288

73.50754319

16920 WELD

19,685.2

16920

0.0

7.9

22.52443806

73.50764540

16930 WELD

19,693.1

16930

0.0

12.4

22.52394424

73.50799145

16940 WELD

19,705.6

16940

0.0

12.2

22.52402739

73.50766018

16950 WELD

19,717.8

16950

0.0

9.4

22.52425355

73.50713125

16960 WELD

19,727.2

16960

0.0

12.4

22.52447414

73.50661284

16970 WELD

19,739.5

16970

0.0

12.2

22.52463575

73.50619349

16980 WELD

19,751.7

16980

0.0

3.0

22.52486996

73.50566494

16990 WELD

19,754.8

16990

0.0

12.3

22.52508502

73.50515656

17000 WELD

19,767.1

17000

0.0

12.4

22.52509163

73.50497550

17010 WELD

19,779.4

17010

0.0

12.5

22.52545126

73.50438420

17020 WELD

19,791.9

17020

0.0

12.2

22.52584133

73.50381540

17030 WELD

19,804.2

17030

0.0

12.3

22.52587366

73.50380510

17040 WELD

19,816.4

17040

0.0

12.4

22.52588680

73.50381387

17050 WELD

19,828.9

17050

0.0

12.4

22.52590016

73.50382282

17060 WELD

19,841.2

17060

0.0

12.4

22.52591454

73.50383272

17070 WELD

19,853.6

17070

0.0

12.3

22.52540566

73.50418778

17080 WELD

19,865.9

17080

0.0

12.3

22.52489849

73.50454326

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 59 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

17090 WELD

19,878.2

17090

0.0

12.3

22.52457360

73.50461433

17100 WELD

19,890.5

17100

0.0

12.4

22.52424974

73.50468470

17110 WELD

19,902.9

17110

0.0

12.4

22.52393826

73.50473987

17120 WELD

19,915.3

17120

0.0

12.2

22.52365100

73.50476150

17130 WELD

19,927.6

17130

0.0

12.5

22.52345550

73.50466870

17140 WELD

19,940.0

17140

0.0

12.3

22.52337456

73.50444543

17150 WELD

19,952.3

17150

0.0

12.5

22.52334776

73.50416030

17160 WELD

19,964.7

17160

0.0

12.4

22.52349266

73.50370985

17170 WELD

19,977.1

17170

0.0

12.3

22.52355939

73.50365812

17180 WELD

19,989.5

17180

0.0

12.2

22.52344871

73.50380603

17190 WELD

20,001.7

17190

0.0

12.0

22.52327232

73.50402143

17200 WELD

20,013.7

17200

0.0

12.3

22.52286083

73.50444055

17210 WELD

20,026.0

17210

0.0

12.1

22.52235663

73.50488076

17220 WELD

20,038.1

17220

0.0

12.7

22.52204224

73.50494300

17230 WELD

20,050.8

17230

0.0

12.3

22.52229976

73.50439834

17240 WELD

20,063.1

17240

0.0

12.4

22.52259029

73.50382239

17250 WELD

20,075.5

17250

0.0

11.9

22.52289117

73.50325104

17260 WELD

20,087.4

17260

0.0

12.5

22.52320620

73.50267149

17270 WELD

20,099.8

17270

0.0

12.4

22.52357781

73.50211488

17280 WELD

20,112.2

17280

0.0

12.3

22.52397243

73.50153557

17290 WELD

20,124.5

17290

0.0

12.2

22.52436897

73.50097156

17300 WELD

20,136.7

17300

0.0

12.5

22.52476047

73.50042637

17310 WELD

20,149.2

17310

0.0

12.4

22.52494784

73.50022531

17320 WELD

20,161.6

17320

0.0

12.3

22.52441113

73.50063855

17330 WELD

20,173.9

17330

0.0

12.4

22.52388572

73.50103100

17340 WELD

20,186.3

17340

0.0

12.3

22.52336799

73.50141075

17350 WELD

20,198.6

17350

0.0

12.3

22.52285362

73.50178167

17360 WELD

20,210.9

17360

0.0

12.3

22.52235116

73.50213451

17370 WELD

20,223.1

17370

0.0

12.6

22.52186006

73.50246706

17380 WELD

20,235.7

17380

0.0

12.3

22.52137134

73.50279913

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 60 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

17390 WELD

20,247.9

17390

0.0

12.4

22.52089797

73.50309525

17400 WELD

20,260.3

17400

0.0

11.9

22.52073239

73.50296854

17410 WELD

20,272.2

17410

0.0

12.5

22.52108387

73.50237194

17420 WELD

20,284.7

17420

0.0

12.1

22.52145143

73.50182178

17430 WELD

20,296.8

17430

0.0

12.5

22.52148547

73.50180905

17440 WELD

20,309.3

17440

0.0

12.4

22.52131586

73.50201490

17450 WELD

20,321.6

17450

0.0

12.4

22.52107843

73.50229286

17460 WELD

20,334.0

17460

0.0

12.3

22.52060298

73.50275186

17470 WELD

20,346.3

17470

0.0

12.3

22.52010733

73.50322057

17480 WELD

20,358.6

17480

0.0

12.3

22.51958781

73.50364286

17490 WELD

20,370.9

17490

0.0

12.4

22.51925799

73.50372898

17500 WELD

20,383.3

17500

0.0

12.3

22.51894243

73.50379530

17510 WELD

20,395.6

17510

0.0

12.4

22.51927741

73.50319440

17520 WELD

20,408.0

17520

0.0

12.3

22.51962459

73.50259773

17530 WELD

20,420.3

17530

0.0

12.4

22.51998311

73.50199540

17540 WELD

20,432.6

17540

0.0

12.4

22.52033947

73.50139878

17550 WELD

20,445.0

17550

0.0

12.5

22.52072025

73.50087233

17560 WELD

20,457.5

17560

0.0

12.3

22.52083324

73.50076236

17570 WELD

20,469.8

17570

0.0

12.3

22.52038565

73.50120940

17580 WELD

20,482.0

17580

0.0

12.4

22.51992841

73.50165871

17590 WELD

20,494.4

17590

0.0

12.2

22.51947148

73.50211020

17600 WELD

20,506.6

17600

0.0

12.5

22.51898513

73.50257959

17610 WELD

20,519.1

17610

0.0

12.4

22.51846959

73.50303200

17620 WELD

20,531.5

17620

0.0

12.4

22.51794135

73.50348698

17630 WELD

20,544.0

17630

0.0

12.4

22.51767041

73.50349171

17640 WELD

20,556.4

17640

0.0

12.4

22.51792564

73.50293424

17650 WELD

20,568.7

17650

0.0

12.3

22.51830699

73.50233264

17660 WELD

20,581.1

17660

0.0

12.3

22.51869427

73.50174145

17670 WELD

20,593.4

17670

0.0

12.3

22.51908023

73.50118578

17680 WELD

20,605.7

17680

0.0

12.4

22.51946865

73.50063394

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 61 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

17690 WELD

20,618.1

17690

0.0

12.6

22.51984595

73.50012049

17700 WELD

20,630.7

17700

0.0

12.2

22.52005964

73.49987910

17710 WELD

20,642.8

17710

0.0

12.3

22.51983599

73.50014471

17720 WELD

20,655.2

17720

0.0

12.4

22.51961476

73.50040255

17730 WELD

20,667.5

17730

0.0

12.3

22.51929518

73.50075536

17740 WELD

20,679.8

17740

0.0

12.4

22.51890242

73.50117025

17750 WELD

20,692.3

17750

0.0

12.2

22.51839096

73.50164757

17760 WELD

20,704.5

17760

0.0

11.8

22.51785710

73.50212086

17770 WELD

20,716.4

17770

0.0

12.4

22.51733338

73.50254494

17780 WELD

20,728.8

17780

0.0

12.4

22.51718400

73.50240542

17790 WELD

20,741.2

17790

0.0

11.9

22.51705429

73.50223355

17800 WELD

20,753.1

17800

0.0

12.6

22.51694129

73.50204326

17810 WELD

20,765.7

17810

0.0

12.2

22.51704557

73.50162591

17820 WELD

20,777.9

17820

0.0

3.1

22.51744447

73.50103254

17830 WELD

20,781.0

17830

0.0

9.4

22.51782860

73.50048225

17840 WELD

20,790.4

17840

0.0

12.5

22.51787282

73.50029836

17850 WELD

20,802.9

17850

0.0

12.3

22.51805758

73.50004101

17860 WELD

20,815.2

17860

0.0

12.4

22.51820109

73.49989354

17870 WELD

20,827.6

17870

0.0

12.3

22.51831022

73.49978616

17880 WELD

20,840.0

17880

0.0

12.3

22.51831498

73.49980701

17890 WELD

20,852.2

17890

0.0

12.4

22.51828574

73.49986606

17900 WELD

20,864.6

17900

0.0

12.3

22.51806748

73.50012538

17910 WELD

20,877.0

17910

0.0

12.3

22.51753238

73.50060839

17920 WELD

20,889.2

17920

0.0

12.4

22.51699472

73.50106984

17930 WELD

20,901.6

17930

0.0

12.4

22.51646275

73.50150782

17940 WELD

20,914.0

17940

0.0

11.6

22.51598417

73.50182124

17950 WELD

20,925.6

17950

0.0

13.2

22.51596892

73.50151892

17960 WELD

20,938.9

17960

0.0

12.3

22.51624724

73.50095879

17970 WELD

20,951.2

17970

0.0

12.3

22.51665503

73.50029672

17980 WELD

20,963.5

17980

0.0

12.5

22.51703907

73.49967883

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 62 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

17990 WELD

20,975.9

17990

0.0

11.9

22.51743229

73.49906974

18000 WELD

20,987.8

18000

0.0

12.4

22.51776203

73.49865730

18010 WELD

21,000.3

18010

0.0

12.3

22.51803487

73.49832287

18020 WELD

21,012.6

18020

0.0

12.3

22.51800789

73.49838022

18030 WELD

21,024.8

18030

0.0

12.4

22.51777775

73.49865067

18040 WELD

21,037.3

18040

0.0

12.4

22.51750443

73.49896231

18050 WELD

21,049.7

18050

0.0

12.3

22.51722712

73.49928171

18060 WELD

21,062.0

18060

0.0

12.3

22.51691172

73.49963758

18070 WELD

21,074.4

18070

0.0

12.4

22.51652332

73.50005622

18080 WELD

21,086.8

18080

0.0

12.3

22.51607632

73.50052117

18090 WELD

21,099.1

18090

0.0

9.7

22.51599339

73.50029524

18100 WELD

21,108.8

18100

0.0

3.1

22.51611136

73.49985844

18110 WELD

21,111.9

18110

0.0

12.1

22.51620647

73.49948490

18120 WELD

21,124.1

18120

0.0

12.4

22.51611249

73.49948839

18130 WELD

21,136.4

18130

0.0

12.2

22.51594554

73.49969645

18140 WELD

21,148.6

18140

0.0

12.1

22.51574812

73.49994070

18150 WELD

21,160.7

18150

0.0

12.1

22.51551703

73.50021730

18160 WELD

21,172.9

18160

0.0

11.7

22.51526132

73.50051830

18170 WELD

21,184.6

18170

0.0

13.0

22.51497527

73.50085024

18180 WELD

21,197.6

18180

0.0

13.9

22.51466236

73.50120230

18190 WELD

21,211.5

18190

0.0

10.8

22.51412155

73.50174534

18200 WELD

21,222.3

18200

0.0

12.3

22.51352504

73.50232966

18210 WELD

21,234.7

18210

0.0

12.1

22.51304499

73.50271351

18220 WELD

21,246.7

18220

0.0

12.5

22.51251872

73.50313463

18230 WELD

21,259.2

18230

0.0

12.4

22.51201497

73.50352199

18240 WELD

21,271.7

18240

0.0

12.4

22.51165168

73.50366143

18250 WELD

21,284.0

18250

0.0

12.3

22.51175792

73.50322042

18260 WELD

21,296.3

18260

0.0

12.4

22.51210795

73.50257780

18270 WELD

21,308.7

18270

0.0

11.6

22.51248634

73.50193312

18280 WELD

21,320.3

18280

0.0

13.2

22.51288957

73.50129253

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 63 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

18290 WELD

21,333.5

18290

0.0

13.9

22.51318756

73.50089266

18300 WELD

21,347.4

18300

0.0

13.6

22.51354098

73.50044359

18310 WELD

21,361.0

18310

0.0

11.2

22.51392110

73.49997165

18320 WELD

21,372.2

18320

0.0

10.9

22.51427605

73.49953513

18330 WELD

21,383.2

18330

0.0

10.9

22.51456094

73.49916035

18340 WELD

21,394.1

18340

0.0

14.0

22.51483847

73.49879262

18350 WELD

21,408.0

18350

0.0

12.7

22.51511686

73.49842480

18360 WELD

21,420.7

18360

0.0

13.1

22.51549530

73.49797149

18370 WELD

21,433.8

18370

0.0

12.6

22.51583575

73.49755191

21,446.3

18380

0.0

0.1

22.51582865

73.49755986

18380 WELD

21,446.4

18380

0.0

13.3

22.51544962

73.49798485

18390 WELD

21,459.7

18390

0.0

11.3

22.51487457

73.49848786

18400 WELD

21,470.9

18400

0.0

11.1

22.51427202

73.49902572

18410 WELD

21,482.1

18410

0.0

11.4

22.51375336

73.49947151

18420 WELD

21,493.5

18420

0.0

11.7

22.51324114

73.49991274

18430 WELD

21,505.2

18430

0.0

11.1

22.51271827

73.50036909

18440 WELD

21,516.3

18440

0.0

11.6

22.51218572

73.50083966

18450 WELD

21,527.9

18450

0.0

13.5

22.51167713

73.50128528

18460 WELD

21,541.4

18460

0.0

11.3

22.51115075

73.50175466

18470 WELD

21,552.7

18470

0.0

13.9

22.51055451

73.50230982

18480 WELD

21,566.6

18480

0.0

14.0

22.51004470

73.50276608

18490 WELD

21,580.6

18490

0.0

12.8

22.50943397

73.50334617

18500 WELD

21,593.4

18500

0.0

11.4

22.50882342

73.50393046

18510 WELD

21,604.8

18510

0.0

11.7

22.50826072

73.50446105

18520 WELD

21,616.5

18520

0.0

11.1

22.50775192

73.50492949

18530 WELD

21,627.6

18530

0.0

13.2

22.50723475

73.50541120

18540 WELD

21,640.8

18540

0.0

11.4

22.50674264

73.50586505

18550 WELD

21,652.2

18550

0.0

12.0

22.50616970

73.50642215

18560 WELD

21,664.2

18560

0.0

11.0

22.50566947

73.50688708

18570 WELD

21,675.3

18570

0.0

11.2

22.50515061

73.50736249

11000035 WT CHANGE

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

15.90

70000

0.72

Page 64 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

18580 WELD

21,686.5

18580

0.0

11.4

22.50467677

73.50777297

18590 WELD

21,697.9

18590

0.0

11.1

22.50420434

73.50817400

18600 WELD

21,709.0

18600

0.0

12.5

22.50377255

73.50848234

18610 WELD

21,721.6

18610

0.0

13.7

22.50336280

73.50876041

18620 WELD

21,735.3

18620

0.0

11.1

22.50303031

73.50887786

18630 WELD

21,746.4

18630

0.0

11.6

22.50269332

73.50898223

18640 WELD

21,757.9

18640

0.0

11.7

22.50243028

73.50901850

18650 WELD

21,769.6

18650

0.0

11.3

22.50241058

73.50871226

18660 WELD

21,780.9

18660

0.0

11.1

22.50241976

73.50836898

18670 WELD

21,792.0

18670

0.0

11.3

22.50245139

73.50800547

18680 WELD

21,803.4

18680

0.0

11.3

22.50256012

73.50755754

18690 WELD

21,814.6

18690

0.0

11.5

22.50269906

73.50707545

18700 WELD

21,826.1

18700

0.0

14.2

22.50302529

73.50646187

18710 WELD

21,840.2

18710

0.0

14.3

22.50336859

73.50584545

18720 WELD

21,854.5

18720

0.0

11.2

22.50381110

73.50516463

18730 WELD

21,865.7

18730

0.0

12.1

22.50404297

73.50489297

18740 WELD

21,877.9

18740

0.0

10.9

22.50419181

73.50469327

18750 WELD

21,888.8

18750

0.0

11.7

22.50432885

73.50452745

18760 WELD

21,900.4

18760

0.0

11.5

22.50443182

73.50439101

18770 WELD

21,911.9

18770

0.0

11.3

22.50433911

73.50452609

18780 WELD

21,923.2

18780

0.0

11.5

22.50411494

73.50481301

18790 WELD

21,934.7

18790

0.0

11.1

22.50385083

73.50514189

18800 WELD

21,945.8

18800

0.0

11.6

22.50338852

73.50564871

18810 WELD

21,957.4

18810

0.0

11.4

22.50293243

73.50613935

18820 WELD

21,968.8

18820

0.0

10.9

22.50244615

73.50655615

18830 WELD

21,979.7

18830

0.0

11.3

22.50197671

73.50694272

18840 WELD

21,991.0

18840

0.0

11.9

22.50153647

73.50728551

18850 WELD

22,002.9

18850

0.0

13.9

22.50109644

73.50761851

18860 WELD

22,016.7

18860

0.0

11.5

22.50073697

73.50779424

18870 WELD

22,028.3

18870

0.0

10.7

22.50059544

73.50761226

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 65 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

18880 WELD

22,038.9

18880

0.0

3.9

22.50049921

73.50740490

18890 WELD

22,042.9

18890

0.0

10.6

22.50042713

73.50717909

18900 WELD

22,053.4

18900

0.0

13.9

22.50036104

73.50704789

18910 WELD

22,067.3

18910

0.0

14.2

22.50039511

73.50669198

18920 WELD

22,081.5

18920

0.0

11.7

22.50050175

73.50620006

18930 WELD

22,093.3

18930

0.0

11.5

22.50086516

73.50545747

18940 WELD

22,104.7

18940

0.0

11.2

22.50116138

73.50483038

18950 WELD

22,115.9

18950

0.0

11.7

22.50145975

73.50421266

18960 WELD

22,127.6

18960

0.0

11.7

22.50179732

73.50360852

18970 WELD

22,139.3

18970

0.0

10.7

22.50214375

73.50306273

18980 WELD

22,149.9

18980

0.0

10.6

22.50247915

73.50255113

18990 WELD

22,160.5

18990

0.0

11.0

22.50262813

73.50234346

19000 WELD

22,171.5

19000

0.0

11.6

22.50275972

73.50216029

19010 WELD

22,183.1

19010

0.0

11.3

22.50287592

73.50200818

19020 WELD

22,194.4

19020

0.0

10.9

22.50274701

73.50218560

19030 WELD

22,205.3

19030

0.0

11.1

22.50258017

73.50240338

19040 WELD

22,216.4

19040

0.0

11.5

22.50229901

73.50274136

19050 WELD

22,227.9

19050

0.0

11.3

22.50197106

73.50313100

19060 WELD

22,239.2

19060

0.0

11.1

22.50159419

73.50357559

19070 WELD

22,250.3

19070

0.0

11.5

22.50110524

73.50407980

19080 WELD

22,261.8

19080

0.0

11.1

22.50062062

73.50457146

19090 WELD

22,272.8

19090

0.0

11.7

22.50011738

73.50505108

19100 WELD

22,284.5

19100

0.0

11.5

22.49967701

73.50538700

19110 WELD

22,296.0

19110

0.0

11.4

22.49923482

73.50571129

19120 WELD

22,307.4

19120

0.0

11.3

22.49882008

73.50598909

19130 WELD

22,318.7

19130

0.0

11.7

22.49847823

73.50614513

19140 WELD

22,330.4

19140

0.0

11.1

22.49816541

73.50625560

19150 WELD

22,341.5

19150

0.0

12.2

22.49806224

73.50605508

19160 WELD

22,353.7

19160

0.0

11.4

22.49798131

73.50583302

19170 WELD

22,365.2

19170

0.0

11.1

22.49792875

73.50555782

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 66 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

19180 WELD

22,376.3

19180

0.0

12.6

22.49796708

73.50518244

19190 WELD

22,388.9

19190

0.0

14.0

22.49802882

73.50478482

19200 WELD

22,402.8

19200

0.0

11.5

22.49825316

73.50419033

19210 WELD

22,414.3

19210

0.0

11.6

22.49853920

73.50351390

19220 WELD

22,425.9

19220

0.0

11.3

22.49883924

73.50289086

19230 WELD

22,437.2

19230

0.0

11.5

22.49915658

73.50225986

19240 WELD

22,448.6

19240

0.0

13.9

22.49947409

73.50164185

19250 WELD

22,462.6

19250

0.0

12.7

22.49982845

73.50104737

19260 WELD

22,475.3

19260

0.0

11.5

22.50027505

73.50035604

19270 WELD

22,486.8

19270

0.0

7.0

22.50065047

73.49980403

19280 WELD

22,493.9

19280

0.0

11.5

22.50089251

73.49946899

19290 WELD

22,505.4

19290

0.0

11.2

22.50100559

73.49925161

19300 WELD

22,516.5

19300

0.0

11.4

22.50122505

73.49895507

19310 WELD

22,527.9

19310

0.0

11.3

22.50142211

73.49868831

19320 WELD

22,539.2

19320

0.0

11.1

22.50150718

73.49858736

19330 WELD

22,550.3

19330

0.0

11.6

22.50157167

73.49851380

19340 WELD

22,561.9

19340

0.0

11.0

22.50161738

73.49846213

19350 WELD

22,572.9

19350

0.0

11.2

22.50142503

73.49871030

19360 WELD

22,584.1

19360

0.0

12.2

22.50121734

73.49896622

19370 WELD

22,596.3

19370

0.0

11.7

22.50098884

73.49925000

19380 WELD

22,608.0

19380

0.0

11.4

22.50072235

73.49959173

19390 WELD

22,619.4

19390

0.0

11.1

22.50031973

73.50005856

19400 WELD

22,630.5

19400

0.0

11.9

22.49990260

73.50053318

19410 WELD

22,642.4

19410

0.0

11.9

22.49945478

73.50102323

19420 WELD

22,654.3

19420

0.0

10.9

22.49893201

73.50157032

19430 WELD

22,665.2

19430

0.0

11.5

22.49840250

73.50210448

19440 WELD

22,676.7

19440

0.0

11.9

22.49791318

73.50257955

19450 WELD

22,688.6

19450

0.0

10.9

22.49740214

73.50306746

19460 WELD

22,699.5

19460

0.0

11.8

22.49690858

73.50348365

19470 WELD

22,711.3

19470

0.0

10.8

22.49646331

73.50383591

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 67 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

19480 WELD

22,722.2

19480

0.0

11.5

22.49604218

73.50411807

19490 WELD

22,733.7

19490

0.0

10.9

22.49570358

73.50427965

19500 WELD

22,744.6

19500

0.0

11.5

22.49537594

73.50441050

19510 WELD

22,756.1

19510

0.0

12.0

22.49514301

73.50440513

19520 WELD

22,768.1

19520

0.0

11.1

22.49507529

73.50415957

19530 WELD

22,779.2

19530

0.0

11.5

22.49503657

73.50386893

19540 WELD

22,790.8

19540

0.0

11.2

22.49501347

73.50357205

19550 WELD

22,802.0

19550

0.0

11.6

22.49513946

73.50309241

19560 WELD

22,813.6

19560

0.0

11.4

22.49527293

73.50261171

19570 WELD

22,825.0

19570

0.0

11.4

22.49542989

73.50210108

19580 WELD

22,836.4

19580

0.0

11.4

22.49570459

73.50148821

19590 WELD

22,847.8

19590

0.0

11.6

22.49599545

73.50086609

19600 WELD

22,859.4

19600

0.0

11.8

22.49630311

73.50023685

19610 WELD

22,871.2

19610

0.0

13.9

22.49665396

73.49959296

19620 WELD

22,885.1

19620

0.0

11.4

22.49702454

73.49894626

19630 WELD

22,896.5

19630

0.0

11.5

22.49746522

73.49828524

19640 WELD

22,908.0

19640

0.0

11.2

22.49780771

73.49775726

19650 WELD

22,919.2

19650

0.0

11.5

22.49807952

73.49737145

19660 WELD

22,930.7

19660

0.0

11.7

22.49833212

73.49701496

19670 WELD

22,942.3

19670

0.0

11.7

22.49856159

73.49670265

19680 WELD

22,954.1

19680

0.0

11.1

22.49863773

73.49661840

19690 WELD

22,965.2

19690

0.0

11.4

22.49867677

73.49658509

19700 WELD

22,976.6

19700

0.0

11.6

22.49866356

73.49661057

19710 WELD

22,988.2

19710

0.0

11.5

22.49860834

73.49669396

19720 WELD

22,999.7

19720

0.0

2.8

22.49841847

73.49694112

19730 WELD

23,002.5

19730

0.0

14.0

22.49814912

73.49727518

19740 WELD

23,016.5

19740

0.0

11.5

22.49801713

73.49732083

19750 WELD

23,027.9

19750

0.0

10.9

22.49760942

73.49784041

19760 WELD

23,038.8

19760

0.0

11.5

22.49716070

73.49834371

19770 WELD

23,050.3

19770

0.0

11.6

22.49672131

73.49882659

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 68 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

19780 WELD

23,061.8

19780

0.0

11.4

22.49621579

73.49936058

19790 WELD

23,073.2

19790

0.0

11.3

22.49569101

73.49988181

19800 WELD

23,084.6

19800

0.0

11.4

22.49518472

73.50034285

19810 WELD

23,096.0

19810

0.0

14.2

22.49469280

73.50077311

19820 WELD

23,110.2

19820

0.0

11.4

22.49425092

73.50109570

19830 WELD

23,121.6

19830

0.0

11.3

22.49385414

73.50128331

19840 WELD

23,132.9

19840

0.0

11.6

22.49353988

73.50139173

19850 WELD

23,144.5

19850

0.0

11.4

22.49328377

73.50141359

19860 WELD

23,155.9

19860

0.0

12.3

22.49309252

73.50133607

19870 WELD

23,168.2

19870

0.0

11.5

22.49293730

73.50121016

19880 WELD

23,179.7

19880

0.0

11.7

22.49289651

73.50091890

19890 WELD

23,191.4

19890

0.0

10.9

22.49288446

73.50060331

19900 WELD

23,202.2

19900

0.0

11.2

22.49294701

73.50019534

19910 WELD

23,213.4

19910

0.0

11.8

22.49302046

73.49978814

19920 WELD

23,225.2

19920

0.0

11.4

22.49311209

73.49935642

19930 WELD

23,236.7

19930

0.0

11.4

22.49329527

73.49881711

19940 WELD

23,248.0

19940

0.0

11.6

22.49349909

73.49826599

19950 WELD

23,259.6

19950

0.0

11.1

22.49371888

73.49770344

19960 WELD

23,270.7

19960

0.0

11.5

22.49399835

73.49708841

19970 WELD

23,282.3

19970

0.0

12.1

22.49427466

73.49648921

19980 WELD

23,294.3

19980

0.0

11.5

22.49459604

73.49585319

19990 WELD

23,305.8

19990

0.0

11.5

22.49494662

73.49518761

20000 WELD

23,317.4

20000

0.0

11.4

22.49529681

73.49454662

20010 WELD

23,328.7

20010

0.0

11.2

22.49566291

73.49391127

20020 WELD

23,339.9

20020

0.0

11.3

22.49602995

73.49328778

20030 WELD

23,351.2

20030

0.0

11.7

22.49639340

73.49270031

20040 WELD

23,362.9

20040

0.0

10.9

22.49676048

73.49211965

20050 WELD

23,373.8

20050

0.0

11.4

22.49714461

73.49153011

20060 WELD

23,385.1

20060

0.0

10.9

22.49748508

73.49101640

20070 WELD

23,396.1

20070

0.0

4.1

22.49782578

73.49052706

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 69 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

20080 WELD

23,400.1

20080

0.0

7.3

22.49814255

73.49007232

20090 WELD

23,407.5

20090

0.0

11.4

22.49820283

73.48988617

20100 WELD

23,418.9

20100

0.0

11.7

22.49836521

73.48960933

20110 WELD

23,430.5

20110

0.0

11.6

22.49863702

73.48924850

20120 WELD

23,442.1

20120

0.0

11.5

22.49888548

73.48893026

20130 WELD

23,453.6

20130

0.0

11.4

22.49911350

73.48864157

20140 WELD

23,464.9

20140

0.0

11.6

22.49928148

73.48843740

20150 WELD

23,476.5

20150

0.0

11.5

22.49943170

73.48825617

20160 WELD

23,488.1

20160

0.0

12.4

22.49955705

73.48811239

20170 WELD

23,500.4

20170

0.0

13.5

22.49959953

73.48807457

20180 WELD

23,513.9

20180

0.0

10.5

22.49960946

73.48808887

20190 WELD

23,524.4

20190

0.0

10.8

22.49950391

73.48825566

20200 WELD

23,535.3

20200

0.0

11.8

22.49938958

73.48839031

20210 WELD

23,547.1

20210

0.0

11.2

22.49925156

73.48855652

20220 WELD

23,558.3

20220

0.0

11.3

22.49902219

73.48883741

20230 WELD

23,569.6

20230

0.0

13.7

22.49877420

73.48912919

20240 WELD

23,583.3

20240

0.0

11.0

22.49848565

73.48946604

20250 WELD

23,594.4

20250

0.0

14.2

22.49808773

73.48995175

20260 WELD

23,608.5

20260

0.0

11.4

22.49771939

73.49036351

20270 WELD

23,619.9

20270

0.0

11.6

22.49722047

73.49095463

20280 WELD

23,631.5

20280

0.0

14.2

22.49677983

73.49144081

20290 WELD

23,645.7

20290

0.0

14.3

22.49630162

73.49196168

20300 WELD

23,660.0

20300

0.0

13.9

22.49570344

73.49263599

20310 WELD

23,673.8

20310

0.0

11.1

22.49506307

73.49333334

20320 WELD

23,685.0

20320

0.0

11.4

22.49443713

73.49400901

20330 WELD

23,696.4

20330

0.0

4.0

22.49391325

73.49453581

20340 WELD

23,700.3

20340

0.0

11.2

22.49337450

73.49505932

20350 WELD

23,711.5

20350

0.0

14.2

22.49314092

73.49519888

20360 WELD

23,725.7

20360

0.0

14.1

22.49261393

73.49569828

20370 WELD

23,739.8

20370

0.0

13.8

22.49197265

73.49633553

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 70 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

20380 WELD

23,753.6

20380

0.0

11.5

22.49134570

73.49694272

20390 WELD

23,765.1

20390

0.0

12.1

22.49072994

73.49754444

20400 WELD

23,777.2

20400

0.0

11.4

22.49022279

73.49799321

20410 WELD

23,788.6

20410

0.0

11.3

22.48971102

73.49843274

20420 WELD

23,799.9

20420

0.0

11.0

22.48926034

73.49877350

20430 WELD

23,810.9

20430

0.0

11.5

22.48883266

73.49907728

20440 WELD

23,822.4

20440

0.0

11.4

22.48843989

73.49932750

20450 WELD

23,833.8

20450

0.0

4.5

22.48807938

73.49951357

20460 WELD

23,838.3

20460

0.0

11.4

22.48776533

73.49962589

20470 WELD

23,849.7

20470

0.0

14.0

22.48761258

73.49960882

20480 WELD

23,863.7

20480

0.0

11.5

22.48739504

73.49957360

20490 WELD

23,875.2

20490

0.0

12.0

22.48719003

73.49947935

20500 WELD

23,887.2

20500

0.0

11.5

22.48705617

73.49932181

20510 WELD

23,898.7

20510

0.0

14.1

22.48698695

73.49906850

20520 WELD

23,912.8

20520

0.0

11.4

22.48697234

73.49875168

20530 WELD

23,924.2

20530

0.0

8.5

22.48705153

73.49827826

20540 WELD

23,932.8

20540

0.0

11.5

22.48711848

73.49786299

20550 WELD

23,944.3

20550

0.0

11.4

22.48716577

73.49751903

20560 WELD

23,955.7

20560

0.0

11.6

22.48731134

73.49701366

20570 WELD

23,967.3

20570

0.0

11.5

22.48748494

73.49648284

20580 WELD

23,978.8

20580

0.0

11.5

22.48770359

73.49590445

20590 WELD

23,990.2

20590

0.0

11.2

22.48794731

73.49530741

20600 WELD

24,001.5

20600

0.0

11.7

22.48822808

73.49468051

20610 WELD

24,013.2

20610

0.0

11.7

22.48851689

73.49405634

20620 WELD

24,024.9

20620

0.0

11.6

22.48885014

73.49339265

20630 WELD

24,036.5

20630

0.0

11.6

22.48920152

73.49272280

20640 WELD

24,048.1

20640

0.0

11.5

22.48956658

73.49205961

20650 WELD

24,059.6

20650

0.0

11.4

22.48994487

73.49140130

20660 WELD

24,071.0

20660

0.0

11.7

22.49032791

73.49076813

20670 WELD

24,082.7

20670

0.0

11.8

22.49070345

73.49016883

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

Page 71 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

U/S
Distance
Weld
(m)
Joint # Dist.

D/S
Weld
Dist.

Latitude

Longitude

20680 WELD

24,094.5

20680

0.0

11.3

22.49108798

73.48957919

20690 WELD

24,105.8

20690

0.0

11.4

22.49145825

73.48903370

20700 WELD

24,117.2

20700

0.0

11.7

22.49179027

73.48855018

20710 WELD

24,128.9

20710

0.0

11.2

22.49209692

73.48811892

20720 WELD

24,140.1

20720

0.0

11.6

22.49239005

73.48772129

20730 WELD

24,151.7

20730

0.0

11.6

22.49263191

73.48739587

20740 WELD

24,163.3

20740

0.0

11.2

22.49285024

73.48711475

24,174.4

20750

0.0

0.0

22.49285625

73.48710724

20750 WELD

24,174.5

20750

0.0

11.4

22.49303091

73.48688920

20760 WELD

24,185.8

20760

0.0

13.4

22.49312562

73.48677620

20770 WELD

24,199.2

20770

0.0

11.1

22.49313815

73.48677256

20780 WELD

24,210.4

20780

0.0

13.8

22.49309259

73.48687076

20790 WELD

24,224.2

20790

0.0

12.4

22.49297630

73.48702085

20800 WELD

24,236.6

20800

0.0

12.5

22.49275362

73.48733248

20810 WELD

24,249.0

20810

0.0

13.2

22.49249979

73.48765774

20820 WELD

24,262.2

20820

0.0

11.7

22.49217774

73.48805775

20830 WELD

24,273.9

20830

0.0

12.5

22.49178834

73.48853998

20840 WELD

24,286.4

20840

0.0

12.4

22.49138105

73.48901278

20850 WELD

24,298.8

20850

0.0

12.4

22.49090391

73.48956729

20860 WELD

24,311.2

20860

0.0

12.6

22.49040678

73.49013699

20870 WELD

24,323.7

20870

0.0

12.4

22.48987977

73.49072975

20880 WELD

24,336.2

20880

0.0

12.5

22.48932248

73.49134697

20890 WELD

24,348.6

20890

0.0

10.5

22.48874788

73.49196343

24,353.7

20890

5.1

5.4

22.48802000

73.49245000

24,359.1

20900

0.0

0.00000000

0.00000000

11000036 WT CHANGE

10000005 Valve (Receiver), SV-6 Halol


20900 WELD

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

23.80

70000

0.72

Page 72 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Pipeline Listing Report

ID#

Description

12000001 End Run Tickle

U/S
Distance
Weld
(m)
Joint # Dist.
24,365.3

20900

6.2

Type

Number

DEFORMATION

GAINS

GROUPED PITS

LOCATIONS

MISC

WT CHANGES

37

WELDS

2080

D/S
Weld
Dist.

Latitude
-

Longitude

0.00000000

Criteria:

Failure
Length or
Pressure
Orientation
Depth
Pipe
Width or or Safety
(Deg / OClock) (%) Thickness SMYS
Factor

0.00000000

Page 73 of 73

Pfail/
MAOP

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

General Inline Inspection Terms


GLOSSARY

A portable device placed at an above ground reference point that both detects and records the passage of an in-line inspection tool. AGMs are
typically reported using a marker number followed by the aboveground reference point description of the location device (box) placement.

ABOVE-GROUND
REFERENCE POINTS

The above ground reference point is a permanent reference on or above the pipeline, which can be used to locate features in the pipeline.
Reference points can be valves, fences, test stations, markers posts, or ther permanent features.

ACCELERO-METERS

Part of the INS package of the in-line inspection tool. Each TDW tool contains 3 axis-aligned accelerometers measuring orientation and shock.

ANCHOR,
WEIGHT OR
HANGAR
ANOMALY
APPURTENANCE
ASME B31G, MODIFIED
ASME B31G, or
DNV RP-F101
BEND
BEND RADIUS
BORE RESTRICTION
BUCKLE
BURST
PRESSURE
CALIBRATION
DIG
CASING ANOMALY
CHARACTERIZATION
CHECK VALVE
CLAMP
COMPONENT

Non-welded full encirclement pipeline features typically evenly spaced across water crossings. These are usually not detrimental unless
associated metal loss is detected.
Any kind of imperfection or defect that may be present in the wall of the pipe. This includes coating or welding.
A component that is attached to the pipeline; e.g., valve, tee, casing, instrument connection.
Commonly used analysis criterion for metal loss anomalies in a pipeline. TDW software may use ASME B31G, MODIFIED ASME B31G, or DNV
RP-F101 to calculate the safe maximum allowable operating pressure or failure pressure at an area of metal loss. These formulas utilize only
length and depth - they do not take into consideration the width of the anomaly. The MODIFIED ASME B31G more closely approximates the
values obtained via the RSTRENG calculations, which is less conservative than the standard ASME B31G calculation. See also DNV RP-F101.
A physical pipe configuration that changes pipeline direction.
The radius of the bend in the pipe as related to the pipe diameter (D). Example: A 3-D bend would have a radius of 3 times the diameter of the
pipe measured to the centerline of the pipe.
Any reduction of the cross-section of the pipe that may restrict the passage of an ILI pig.
A condition where the pipeline has undergone sufficient plastic deformation to cause permanent wrinkling or deformation of the pipe wall or the
pipe's cross section.
The pressure at which the nominal hoop stress in the wall of a pipe equals the specified minimum yield stress of the pipe grade. It is calculated by
2st/D where s = SMYS, t = nominal wall thickness, D = nominal outside diameter of pipe.
An exploratory excavation to compare findings of an in-line inspection system to actual conditions with the purpose of improving data analysis.
When the casing is not welded, or when a gap occurs in the weld, this signature is detected by the tool, and identified with a miscellaneous
remark.
The process of quantifying the size, shape, orientation, and location of an anomaly, defect, or critical defect after it has been detected.
A valve that prevents reverse flow.
Non-welded full encirclement pipeline feature not located at a bridge or water crossing, in some cases a type of temporary repair.
Any physical part of the pipeline , other than line pipe, including but not limited to valves, welds, tees, flanges, fitting, taps, branch connections,
outlets, supports and anchors.

General Inline Inspection Terms

AGM
(Aboveground Marker)

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

General Inline Inspection Terms


GLOSSARY PART 2

CORROSION
(External)

Metal loss due to electrochemical, galvanic, microbiological, or other attack on the pipe due to environmental conditions surrounding the pipe.

CORROSION
(Internal)

Metal loss due to chemical or other attack on the steel from liquids on the inside of the pipe. Electrochemical attack can also occur in local cells,
but this is less frequent.

DATA ANALYSIS

DATUM

DNV RP-F101
DEFECT
DEFORMATION
PIG
DENTS
DETECTION
THRESHOLD

The process through which indications are evaluated to classify, characterize and size them as non-relevant conditions, pipeline components,
anomalies, imperfections, or defects.
A datum is a set of reference points on the earth's surface against which position measurements are made. Horizontal datums are used for
describing a point on the earth's surface, in latitude and longitude or another coordinate system. While hundreds of reference datums exists some
examples of horizontal datums include, NAD27, NAD83, and WGS84. Vertical datums are tidal, based on sea levels referencing geodetic datums
such as NAVD88, or geodetic, based on the same ellipsoid models of the earth used for computing horizontal datums.
An analysis procedure that differs from the commonly used ASME B31G criterion. Developed by the Norwegian company Det Norske Veritas, this
method is employed for European and Asian pipelines. The DNV algorithm is generally considered to be more conservative than ASME B31G.
An anomaly for which an analysis, such as ASME B31G, would indicate that the pipe is approaching failure as the nominal hoop stress
approaches the specified minimum yield stress (SMYS).
A pig designed to record conditions such as dents, wrinkles, ovalities, bend radius and angle by making measurements of the inside surface of the
pipeline.
Dents are depressions in the pipeline that may be detected by the inline inspection tool. MFL tools may be able to detect dents, but may not be
able to accurately size them.
A characteristic dimension or dimensions of an anomaly that must be exceeded to achieve a stated probability of detection.

DOT192

Part 192 of the Code for Federal Regulations (CFR) Title 49 that addresses Gas Transmission Pipelines.

DOT195

Part 195 of the Code for Federal Regulations (CFR) Title 49 that addresses Transportation of Hazardous Liquids by Pipeline.

ECCENTRIC
CASINGS
ESTIMATED REPAIR
FACTOR (ERF)
ERW (ElectricResistance Weld)
EXPANSION

TDW tools detect when a casing is not centered on the pipeline. These casings are referred to as being eccentric. The closer the casing is to the
pipeline, the stronger the signal seen by the inspection tool. The tool may not detect if the casing is shorted to the pipe wall. The tool might see
evidence of a short, such as metal loss.
The ratio of pipeline design pressure or in some cases MOP to the safe maximum operating pressure (P).
Describes a process used to form steel from a sheet into tubular form (pipe). Welds are formed by resistance heating of two edges of a metal
sheet and then forcing them together to create a solid-state weld.
Local increase of pipe diameter during service which indicates the yield stress of the pipe at that location has been surpassed.

Page 2 of 7

General Inline Inspection Terms

CONTROL POINT Control points are know locations used to provide coordinate updates to aid the final processing of the inertial data gathered from the instruments
onboard the inspection vehicle.

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

General Inline Inspection Terms


GLOSSARY PART 3

FEATURE

Any physical object detected by an in-line inspection system. Features may be anomalies, components, or some other item.

FITTING

A branch connection attached to the pipeline which is smaller than the nominal pipe size that alters flow or diverts product (e.g. tap, offtake, splittee, weld-o-let, thread-o-let).

GAIN (Metal in
Close Proximity)

The inspection tool may detect ferrous metal objects located close to or touching the pipeline. They appear as additional metal added to the pipe
and are referred to as gains. Clamps or anchors are considered gains as well as features such as puddle welds or CP connections. Generally,
repairs such as patches or sleeves are called out as repairs even though they show appear in the data as gains.

GIRTH WELD
GIS
GOUGE
GPS (Global
Positioning
System)
GYROSCOPES
(Gyros)
GROUP
HALF SOLE
HALL SENSORS
HCA (High
Consequence
Area)
HEAT AFFECTED
ZONE (HAZ)

A circumferential weld joining two joints of pipe.


Geographic Information System is any system that captures, stores, analyzes, manages, and presents data that are linked to location. GIS is the
merging of cartography and database technology.
Elongated grooves or cavities caused by mechanical removal of metal.
The navigational system utilizing satellite technology to provide a user an exact position on the earth's surface. When coupled with known surface
locations such as valves and AGMs, an ILI tools INS or IMU can approximate or calculate the centerline of a pipeline.
Electronic sensors used to measure change in direction of in-line inspection tool during inspection process. Displayed as pitch and yaw in
PIGTRAP.
A group is several pits that are grouped together using specific interaction rules. If a pit is a mountain peak, then a group is a mountain range. The
reason for groups is so that the overall extent of the metal loss area can be evaluated. Most formulas for calculating the strength of the pipe wall
around metal loss look at the overall length of metal loss after interaction rules have been applied to pits.
A device used to repair a pipeline by welding a small section over half the circumference of the pipe over the defect, literally half of a sleeve.
A sensor that directly measures the remaining magnetic field strength not absorbed by the pipe.
A criterion for pipelines designed by the Code of Federal Regulations which define what program and practices operators must use to manage
pipeline integrity if the pipeline is located near a commercially navigable waterway, a high population area, or an unusually sensitive area.
The region around a weld which has been metallurgically affected during the welding process.

HEAVY
WELD

A girth weld in which the root pass or a portion of the root pass intrudes further than normal into the ID of the pipe. Not usually considered
detrimental.

HIGH
RESOLUTION

A term used to describe the function of TDW tools for use in MFL or Deformation analysis schemes. Both MFL and Deformation tools are
considered high resolution.

IMPERFECTION

An anomaly with dimension and characteristics that do not exceed acceptable limits.
Page 3 of 7

General Inline Inspection Terms

FAILURE
PRESSURE The ratio of the predicted failure pressure calculated by an analysis criterion (e.g. ASME B31G, RSTRENG, etc.) to the MAOP
RATIO (FPR)

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

General Inline Inspection Terms


GLOSSARY PART 4

INCLUSION

An anomaly in the cross section of the pipeline caused by manufacturing processes. Inclusions may be detrimental if they protrude through the
pipe wall. Refer to mill anomaly.

INDICATION

Any measured signal or response from an inspection of a pipe different than the normal baseline signal.

INS (Inertial
Navigation
System)

Refers to a system of accelerometers and gyroscopes to track the movement and orientation of the inspection tool through bends, turns, etc.

INTERACTION
RULES
INSPECTION
JOINT
LACK OF FUSION
(LOF)
LAUNCHER

LOCATION

LATITUDE &
LONGITUDE
MAOP (Maximum
Allowable
Operating
Pressure)
MAPPING PIG
MEASUREMENT
THRESHOLD

Specifications that establish spacing criteria between anomalies or defects (pits). If the indications or defects are proximate to one another within
the criteria , the anomaly or defect is treated as a single larger unit or group for engineering analysis purposes.
The use of a non-destructive inspection technique.
A single section of pipe that is welded to others to make up a pipeline.
In a weld, any area or zone that lacks complete melting and coalescence of a portion of the weld.
Refers to the beginning of the inspection; an oversize section of pipe equipped with sealing door through which the inspection tool is loaded into
the pipeline.
A location is a feature in the pipeline that can be used to correlate the inspection tool data to above ground references. Common location features
include valves, fitting, flanges, tees, casings, repairs and AGMs. For example, a metal loss area could be referenced as being 200 feet
downstream from a valve. Not all locations can be easily found from aboveground.
Latitude is the angular distance north or south from the earth's equator measured through 90 degrees. Longitude is the arc or portion of the
earth's equator intersected between the meridian of a given place and the prime meridian and is expressed either in degrees or in time. Latitude
and longitude are reported as GPS coordinates. Predicted GPS for features are provided in the Pipeline Listing section.

(or Design Pressure) The maximum internal pressure permitted in the operation of a pipeline as defined by the Code of Federal Regulations.
An ILI tool that uses an IMU to collect data that can be analyzed to produce an elevation and plan view of the pipeline route.
A characteristic's dimension or dimensions above which anomaly measurements can be made.

MECHANICAL
DAMAGE

A generic term used to describe combinations of dents gouges, and/or cold work caused by the application of external force. Damage includes
coating, movement of metal and high residual stress.

METAL LOSS

Any of a number of types of anomalies in pipe in which metal has been removed from the pipe surface, usually due to corrosion or gouging.

MFL (Magnetic
Flux Leakage)

An inspection technique in which a magnetic field is applied to a pipe section and measurements are taken of a magnetic flux density at the pipe
surface. Changes in measured flux density indicate the presence of a possible defect.
Page 4 of 7

General Inline Inspection Terms

IMU (Inertial Inertial measurement unit, or IMU, is the main component of inertial guidance systems. An IMU works by sensing motion including the type, rate,
Measurement Unit) and direction of that motion using a combination of accelerometers and gyroscopes.

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

General Inline Inspection Terms


GLOSSARY PART 5

MINIMUM
BORE

The minimum measured Internal Diameter of the pipe at any particular point. Also referred to as minimum cross-section.

MISALIGNMENT

A girth weld anomaly where the two joints of pipe were not aligned properly prior to welding. Sometimes referred to as a hi-lo.

MOP (Maximum
Operating
Pressure)

The establishhed maximum internal pressure expected during the operation of a pipeline, which cannot normally exceed the maximum allowable
operating pressure (MAOP).

ODOMETER
ORIENTATION
OVALITY

Wheels on in-line inspection tool, which rotate along the pipe to measure the distance the tool has traveled.
The location of the reference around the circumference of the pipe, as viewed in the direction of flow (downstream). The value is represented in
degrees 0-360 rotating clockwise around pipe. (0 = top of pipe, 90 = 3:00)
A condition in which a circular pipe forms into an ellipse, usually as the result of external forces.
Calculated pressure rating for the pipe. Per ASME B31G, it is the greater of either the established MOP for liquid lines (MAOP for gas lines), or
2stFT/D, where S = SMYS, F = appropriate design factor from ASME B31G, T = Temperature derating factor, D = nominal outside diameter of
pipe, and t = nominal wall thickness. See ASME B31G. In application, this variable is identical per DNV RP-F101, however it is calculated using
different formulas and factors.

P' (Calculated
safe maximum
operating
pressure)

Calculated safe maximum operating pressure for the pipeline segment as calculated based on information provided by the Customer. TDW
software uses ASME B31G, MODIFIED ASME B31G, or DNV RP-F101 to calculate the safe maximum allowable operating pressure (P') of the
pipeline at a metal loss area for liquid lines. The calculation also takes into consideration a temperature factor, for use when the line is at elevated
temperature, and a safety factor. The default values used in calculations are a temperature factor of 1, and a safety factor of 72% (80% for
Canada).

Pfail (Calculated
failure
pressure)

Calculated maximum operating pressure for the pipeline segment as calculated based on information provided by the Customer. TDW software
uses ASME B31G, MODIFIED ASME B31G, or DNV RP-F101 to calculate the failure pressure (Pfail) of the pipeline at a metal loss area for gas
lines. The calculation also takes into consideration a temperature factor, for use when the line is at elevated temperature, and a safety factor. The
default values used in calculations are a temperature factor of 1, and a safety factor of 100%.

P'/P

Pfail/MAOP
PATCH
PIG

Percent of maximum established pressure, this is calculated by dividing the calculated safe pressure of the defect (P') by the current established
maximum operating pressure of the pipeline (P). For TDW reporting, P is either established MOP provided by the customer or the calculated
pressure rating for the pipe (P). Percentages less than 100% are considered pressure-reducing.
Percent of MAOP, this is calculated by dividing the calculated failure pressure of the defect (Pfail) by the current MAOP of the pipeline (P). For
TDW reporting, P is either established MAOP provided by the customer or the calculated pressure rating for the pipe (P).
A device used to repair a pipeline by welding a small section of pipe on top of the defect.
A generic term signifying any independent, self-contained device, tool or vehicle that moves through the interior of the pipeline for purposes of
inspecting, batching, dimensioning, or cleaning.

Page 5 of 7

General Inline Inspection Terms

MILL The process of manufacturing pipe can often leave indications in the pipe wall. Typically these anomalies are not detrimental, and are identified
ANOMALY for the benefit of the client.

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

General Inline Inspection Terms


GLOSSARY PART 6

PIPE SUPPORT
PIT
PLANAR
RSTRENG
REBOUNDING
RECEIVER
REPORTING
THRESHOLD
RESIDUAL DENT
DEPTH
RUPTURE
PRESSURE
RATIO (RPR)

Any device used to support an aboveground pipeline.


Localized concentrated-cell corrosion on the external or internal surfaces that results from generation of a potential (voltage) difference set up by
variations in oxygen concentrations within and outside the pit. The oxygen-starved pit acts as anode and the pipe surface acts as the cathode. If
several pits are in close proximity to each other, they may be grouped together using interattion rules as one group.
An NDT term indicating a feature has two-dimensional characteristics like a fissure. Sometimes referred to as crack-like.
A computer program designed to calculate the calculated safe maximum operating pressure (P') of corroded pipe. RSTRENG results are
approximated when Modified B31G criteria is used.
The process of changing the dent depth and shape by internal pressure in the pipe. Generally, dents due to third-party contact will re-round, while
dents due to rocks will not unless the rock causing the dent is removed.
Refers to the ending of the inspection; an oversize section of pipe equipped with sealing door through which the inspection tool is retrieved from
the pipeline.
A parameter that defines whether or not an anomaly will be reported. The parameter may be a limiting value on the depth, width, or length of the
anomaly or feature.
The dent depth measured under a particular set of conditions, e.g., in pressurized or un-pressurized pipeline. While maximum dent depth does
not change, the residual or measured dent depth changes with pressure and loading. Also referred to as the measured dent depth.
The ratio of the predicted failure pressure calculated by an analysis criterion (e.g. ASME B31G, RSTRENG, etc.) to the pressure at specified
minimum yield strength (SMYS)
(or Design Factor) Typically 0.72 for liquid lines per ASME B31G (0.80 in Canada) . In setting the safety factor, due consideration has been given
to and allowances made for the manufacturing tolerance and maximum allowable depth of imperfections provided for in the specifications.

SAFETY FACTOR
DNV RP-F101 uses a slightly different Total Usage Factor, which is entered as the Safety Factor in PIGTRAP. The typical 0.72 factor becomes
0.648 when applying the DNV modeling factor of 0.9.
SEAMLESS
SEAM WELD
(or SEAM)
SLEEVE
SMFL (Spiral Magnetic
Flux Leakage)
SPACER

Pipe that is manufactured by means of extrusion. This process typically creates significantly more variation in pipe wall thickess than ERW pipe.
The longitudinal or spirally-oriented weld in pipe connecting two edges of a formed plate which was created at the pipe mill.
A device used to repair a pipeline by welding a small section of pipe over the full circumference of the pipe over the top of the defect.
A type of MFL tool that creates an oblique, near 45 degree magnetic field within the pipe wall. This allows detection and characterization of long
and narrow metal loss or seam features on par with a TFI tool.
A device used to maintain space between a casing and a pipeline.

Page 6 of 7

General Inline Inspection Terms

PIGTRAP Pipeline Inspection Graphical Test Reporting and Analysis Program (PIGTRAP). Proprietary software developed by TDW Inc. for viewing data
collected by the inspection tool.

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

General Inline Inspection Terms


GLOSSARY PART 7

STITCHING
TEMPERATURE
FACTOR
THIRD PARTY
DAMAGE
TRACKING
TRAP
VOLUMETRIC
WELD ANOMALY
WRINKLE
WRINKLE BEND

Intermittent or repeating lack of fusion in a seam weld.


Typically 1.0 unless the metal temperature is expected to exceed a normal temperature range of -20F (-30C) to 250F (120C).
Damage to a pipeline system by an outside party. See mechanical damage.
The process used to monitor the progress of the inspection tool through the pipeline. AGM boxes are placed at aboveground marker reference
locations to record the passage of the inspection tool.
Pipeline facility for launching and receiving tools and pigs.
A term indicating a feature has three-dimensional characteristic similar to a typical corrosion pit.
Any area or zone in a weld that lacks complete melting and fusion of a portion of the weld which could have occurred during the welding process
or caused by corrosion.
A smooth and localized bulge visible on the outside wall of the pipe.
A field bend that contains smooth and localized bulges on the inner radius of the bend, sometimes formed when pipe is cold bent.

Page 7 of 7

General Inline Inspection Terms

SMYS (Specified A required strength level that measured yield stress of a pipe material must exceed, which is reported as pipe grade. The measured yield stress is
Minimum Yield the tensile stress required to produce a total elongation of 0.5 percent of a gage length as determined by an extensometer during a tensile test.
Strength

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Appendix A
Database and Reporting Details

The Graphs, Dig Sheets, and Tables used in this report were generated using
a standalone reporting engine from data contained in a Microsoft Access
database.

2.

If the end user has MicrosoftAccess on their computer, they have complete
access to the inspection database. The database file which has an extension
of *.mdb (Microsoft database) is stored in the same directory as the tool
data. Although the printed reports and report spreadsheet were generated by
a standalone reporting engine, using Access the user can customize some
basic graphs or tables contained in the database. Alternatively, the data can
be exported to a spreadsheet if preferred.

3.

4.

7.

All records are numbered sequentially from the beginning of the pipeline section to
the end of the pipeline section. By default Welds begin at 110 and are incremented
by 10 from one weld to the next. This can be altered to match customer weld or joint
numbering by request.
Welds

The PigTrap software, included with this report, provides the user with an
easy way to view the data collected by the TDW in-line inspection tool and
can also be helpful when trying to locate certain features or specific sections
of pipe. The software can be run off various media or installed onto a network
or hard drive. Please refer to Appendix B for installation requirements and
instructions.

110

to

9,999,999

Locations

10,000,000

to

10,999,999

Pipe

11,000,000

to

11,999,999

Misc

12,000,000

to

12,999,999

Gains

13,000,000

to

13,999,999

Deformations

14,000,000

to

14,999,999

Bore Restrictions

15,000,000

to

15,999,999

Pits or Other Defects

20,000,000

to

39,999,999

Groups (of Pits)

40,000,000

to

49,999,999

Seam Welds

51,000,000

to

51,999,999

For dig sheet creation, please refer to Appendix C.


8.

5.

TDW inspection tools are designed to detect various features and anomalies
within a pipeline. These various features and anomalies are added to the
database using PigTrap software by qualified Data Analysts.

6.

Database Numbering System: All entries in the database have a unique


number assigned to them. The table below lists the number range of each
category of database records.

All other records are incremented by 1 from one record to the next. For example, the
first Location record would be numbered 10,000,000, the second record would be
10,000,001, and the third record would be 10,000,002, etc. Depending on
information sent out previous to the final report, numbering may change during
analysis of the run.

Page 1 of 1

Appendix A

1.

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Appendix B
Installation Instructions for PigTrap Pipeline Inspection Graphical Test/Report Analysis Program

System Requirements
Before you install and run PigTrap please verify that the computer you are installing to
meets the minimum requirements needed to successfully open and operate PigTrap.
Windows OS

Microsoft Windows 7, Vista; Windows XP Professional, Home Edition


o
Administrator rights required
2.0 GHz Intel Core 2 Duo Processor or higher
2 GB RAM or more
1 GB available hard drive space plus additional necessary for the run size.
Qualified hardware-accelerated OpenGL graphics card, 32-bit color, and 256MB of
VRAM (latest manufacturer drivers strongly recommended also).
Microsoft Access 2003 or higher
Microsoft .NET Framework 3.5 Service pack 1
Microsoft Visual C++ 2008 SP1 Redistributable Package (x86)
Microsoft Report Viewer 2008 SP1

h*.nnn, c*.nnn, i*.nnn, p*.nnn, t*.nnn, l*.nnn & o*.nnn The raw tool data created
on-board the inspection tool. These files are necessary for PigTrap to function
properly. CD and DVDs have the option to install these files onto your computer,
if chosen not to install them to your computer the disks must be used to view the
run.

Run Data and PigTrap Installation


The inspection report will be accompanied by either CDs, DVDs, or an external drive
containing all files necessary for installation. Installation for CDs and DVDs differs from
external drives, if an external drive accompanied your final report please skip to
PigTrap Installation.
CDs and DVDs
1. Insert Disk 1 from the report binder into your computers CD/DVD drive.
2. Access the Setup.exe program located on the CD or DVD. This can be done by
browsing to your computers CD/DVD drive and double clicking Setup.exe. This
will launch the Data Installer program.

What electronic data accompanied the inspection report


The CD, DVD, or external drive supplied by T.D. Williamson, Inc. for this PigTrap inspection
of your pipeline contains the following types of files. For CD or DVDs the first disk will contain
these files while accompanying disks (if any) contain raw tool data only. External drives will
contain this information in the Final Report folder on the external drive under the run name
folder.
Database .MBD (Microsoft Data Base) Files of this type may be viewed through
Microsoft Access. This file contains the analysis of the inspection.
.rsf This is a PigTrap reference file which holds specific settings for the run to be
viewed.
Spreadsheet .XLS (Microsoft Excel) A Pipeline Listing is generated for your run in an
Excel spreadsheet format. Each event at a particular location is identified and
described. You may use Copy and Paste techniques to build your own custom
Note: If you want to install only the Pigtrap software and not the run data
formatted report.
(advanced users only), choose Cancel and go to the Pigtrap Installation steps on
Setup.exe file This file executes the installation of the data for the specific run
page 3.
contained on the disk(s) or external drive.
3. Click Next to continue installing the run data.

Appendix B

The PigTrap software allows the user to view all of the data collected during the
Magpie/TDW inline inspection survey. Installation requires the disk(s) or external drive that
accompany the inspection report.

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Appendix B
4.

8.

5.

You may be prompted to insert other disks from the run distribution if data was
supplied on more than one disk. Insert the required disk and click OK to
continue. Repeat until all disks have been copied.

Choose the installation location on your computer for the data files. The default and
recommended location is C:\Magpie\Software. The location inside this folder is based on
the trap date, name, and size of the run. If you would like to specify another location, click
the Browse... button. Click Finish to continue.
9.

6.

The following progress bar will appear. There may be a short delay while the
database is being copied. Be patient, this is normal.

Click Done to complete the run data installation.

If the installation folder does not already exist, then you will be prompted to create it.
Click Yes to create the new folder.
10. After clicking Done in the Data Installer PigTrap Installation will automatically
launch.

Page 2 of 8

Appendix B

Choose the type of install you would like to perform: Full Install (recommended) or
7.
Minimal Install. The size of the installation is shown next to each type of installation. The
database file must be installed for PigTrap to operate properly, but you may choose to
not install the raw data. If you choose to not install all the data, you may need to change
disks while viewing the data in PigTrap. Click Next to continue after making your
choice.

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Appendix B
PigTrap Installation

Choose the installation location on your computer for the PigTrap software.
The default and recommended location is C:\Magpie\Software. Click Install to
continue.

1.

Plug the external drive into your computer.

2.

Access the PigTrap setup.exe located on the external drive. This can be done by
browsing to external drive and double clicking PigTrap setup.exe.

3.

PigTrap Setup Wizard will launch. This will guide you through the installation of
PigTrap. Click Next to continue.

6.

The following progress bar will appear while PigTrap installs all the necessary
files. Once the installation has completed click Finish to close the wizard.

4.

The Software License Agreement will appear. Read the agreement select I Agree to
continue. You must accept the agreement to install PigTrap.

7. When prompted whether you would like to view the run data, click Yes to launch
PigTrap. Shortcuts are now on the desktop to the run and to PigTrap.
Once PigTrap opens with the data, choose save in the upper left of the data
view.

Page 3 of 8

Appendix B

5.

Note: CD and DVDs follow a slightly different installation process. Steps 1 and 2 are for
external drives, if you are installing from CDs or DVDs please skip to step 3.

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Appendix B
Opening and Viewing the Inspection Data

Basic Navigation
The horizontal scrollbar at the bottom of the main view moves the view upstream or
downstream. Clicking on the left arrow moves upstream while clicking on the right
, then browse to thearrow moves downstream.

1.

Double click on PigTrap .exe icon. Click on the Open Folder icon
installed inspection data folder and select the desired .rsf or .mrsf file.

2.

Double click on a run settings file

(.rsf or .mrsf) that is associated with PigTrap.

3. Drag and drop a run settings file (.rsf or .mrsf) on top of the PigTrap .exe file.
PigTrap was designed so you would have the ability to review previous TDW/Magpie
inspection data when needed. However, you may need to acquire an updated Microsoft
Access Data-base from one of our TDW representatives. When opening previous data in
PigTrap you may encounter the message, ''Your database is very old. You may need to
update it.'' If this happens, don't panic. Chances are you will be able to view the data without
any problems. If you can't, just contact your TDW representative and we can send you a
newer database and walk you through the process of updating.

The vertical scrollbar at the right side of the main view rolls the data vertically to a
desired orientation of the view.
Zooming IN/OUT on the data is easily performed by clicking on the Zoom buttons.
Select the ''Jump to Distance'' icon from the run toolbar to enter a desired distance
point to navigate in the inspection data. The option ''View Width'' sets how much
viewable area to display (time based).
Click on the binoculars to open the Database/Search Edit (DSE). This displays a
table of the pipe objects marked by the Data Analysis personnel. The buttons in the
DSE allow for a high level filtering of specific types of marked pipe objects in the
table. Right click on any pipe object to display a context menu of filtering, resize
columns/rows and generate dig/feature sheets.

We packed so much into the new PigTrap the older reference files just couldnt hold it all so
a new one may need to be created. Once the new reference file finishes, you will be able to
freely navigate around in PigTrap.

What am I looking at?


The data viewed in PigTrap is a 360 degree snapshot of the inside of the inspected pipe.
This captured data is sliced down the middle and laid flat in the PigTrap main display. The For example: Launch and Receive Valves can be found under ''location'' button,
horizontal lines represent sensor data collected from the pigging tool. Each line is one sensor. youll also find Bends, Tees, Markers, etc.
The left side of the screen is ''upstream'' while the right side of the screen is ''downstream''. So,
For additional information regarding dig/feature sheet creation, see Appendix C.
as you scroll from left to right you are moving downstream from the launch valve.
Training
An interactive training is also available from the Help menu . This provides de-tailed
information about PigTrap and its features. Please contact your TDW
representative if you would like some additional training.

Page 4 of 8

Appendix B

Viewing the inspection data in PigTrap can be done by using one of three different
methods.

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Appendix B
Trouble Shooting
Possible Cause

Possible Solution

''Data files missing'' message


displayed on the Main view.

PigTrap is not able to load the necessary data file(s) because they are Please reinstall the inspection data, check the run setting has the
missing, not installed correctly, media/hardware damage (Dirty or
correct path to the files (Run Settings>Files>Data File Directory),
scratched CD/DVD, drive failure).
clean the CD/DVD.

''Generate Dig Sheet'' is not


available from the DSE.

PigTrap is not installed correctly.

Please reinstall PigTrap.

Main window title bar is not visible.

Full screen is enabled.

Press ''F11'' on the keyboard.

The color bit depth is not set correctly.

PigTrap requires a 32 bit color depth, please contact IT to assist


in changing to the correct setting.

One of the task specific modes is enabled.

Press the ''Done'' or ''Cancel'' buttons from the bottom left.

Not able to highlight pipe objects.

REF error message.

If this is the first time opening a run with PigTrap , it may attempt to
create a reference file (.ref2). This message appears because a .ref2 file Select OK to create a new ref2 file.
does not exist or it is corrupt.
Zoomed in very close.

Click on the Zoom OUT button.

Sensors are not enabled.

Turn on the sensors from the Run Toolbar.

The Status/Database windows are not enabled

Go to View>Status Window and toggle the option ON

The video card drivers are out of date.

Update the graphic card drivers. Note: Before installing the latest
driver, you may need to uninstall the current drivers while in
Windows safe mode. Can also turn off shaders.

The .rsf is corrupt and needs replacing.

Reinstall the inspection data.

Microsoft Visual C++2010 redistributable is corrupt or not installed.

This is typically installed the TDW Inspection data. It is possible to


have a corrupt install and additional help may be required to correct
the issue. Please contact your local IT department to assist with the
prerequisite install.

Can't see the sensor data.

Can't find the Status/Database


Window.

Crashes while opening.

Page 5 of 8

Appendix B

Issue

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Appendix B
Toolbar Layout and Functions

Appendix B
Page 6 of 8

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Appendix B
PigTrap for MFL Runs

Appendix B
Page 7 of 8

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Appendix B
PigTrap DEF Runs

Appendix B
Page 8 of 8

TDW Services, Inc.


Gas Authority of India Ltd.
Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol

Appendix C
Printing Dig Sheet Reports Instructions

1.

Open PigTrap to view the inspection data for the run. Please consult Appendix
B if you need instructions on installing and viewing the raw data.

2.

Click on the Database Search/Edit option either by clicking on the small binoculars
icon in the toolbar or choosing the option under the Seek toolbar.

4.

5.
a.

This will bring up the Database Search/Edit (DSE) window.

6.

Once the list populates with that type of object, you can filter or sort the data to
find the object(s) for which you want to create dig sheets.
a.

Clicking on the header of the column will sort either ascending or


descending. Click again to reverse the order.

b.

You may also use or create various filters by clicking on one of the two
Filters buttons.

c.

There is also a Displayed Columns button which allows you to hide or show
the various columns of data.

Right clicking in the table or choosing the Dig Sheets option in the top toolbar
will allow you to create dig sheets one of two ways:
a.

Generate Dig Sheet From Selection This will create a separate dig sheet
for each of the highlighted rows in the list. Using the Ctrl key or the Shift key
and clicking rows will allow for multiple row selection.

b.

Generate Dig Sheet From Table This will create a separate dig sheet for
every item in the list whether highlighted or not. Note that if the list contains
a lot of features, this could lead to numerous dig sheets being created and
may impact the short term performance of your computer while they are
being generated.

The dig sheets you requested will automatically be previewed for easier printing
as well as saved to a directory as a pdf file for printing later.
a.

3.

You can choose what type of feature you want to list in the window by clicking on
the icon in the margin.

7.

To choose which directory the dig sheets are saved into, choose Report
Creation Settings under the Dig Sheets option in the top toolbar.

Also under the Dig Sheets toolbar in the DSE window, you may change various
dig sheet formatting preferences by clicking on Dig Sheet Settings option.

Page 1 of 1

Appendix C

The user can view and print dig sheets for any anomaly or feature detected in the pipeline including Metal Loss (Groups or Pits), Dents, Locations, Gains, Wall Thickness changes,
Welds, Miscellaneous notes, etc.

You might also like