Professional Documents
Culture Documents
2.
3.
4.
11. The removal of the unmasked silicon dioxide at the wafer surface in IC
fabrication.
a. passivation
c. isolation
b. stripping
d. etching
12. The time needed for a function to decay to 36.8% of its initial value.
a. time constant
c. complementary
b. steady state
d. transition period
The equivalent wye element of three equal resistors each equal to 3R and
connected in delta is ______.
a. R
c. 3R
b. R / 3
d. 2R / 3
14. Slew rate is the change in input ______ due to ______ change.
a. voltage , current
c. offset current ,temperature
b. offset current , voltage
d. voltage , temperature
c.
d.
planar
mesa
5.
6.
7.
The main reason why electrons can tunnel through a PN junction is that ______.
a. they have high energy
c. depletion region is extremely thin
b. the barrier potential is low
d. impurity level is low
8.
In RS flip flops, the activation of both inputs causes the flip flop to behave in
______.
a. set
c. race
b. reset
d. toggle
9.
In a mesh the algebraic sum of all voltage rise is equal to the algebraic sum of
all voltage drop.
a. true
c. it depends
b. false
d. sometimes
XNOR gate
NOR gate
shaft rotates for each command pulse.
firing angle
forward angle
24. What will happen to the channel of a JFET as current flows to it?
a. widens
c. skews
b. narrows
d. nothing
25. What are electrons in motion called ______.
a. current
c. voltage
b. charge
d. dynamic elctricity
26. A ______ is generally used with a transistor to prevent excessive temperature
a. resistor
c. capacitor
b. heat sink
d. inductor
27. It is the resistance of the diode when operating at a steady state voltage.
a. dc resistance
c. dynamic resistance
b. ac resistance
d. average resistance
28. Happens when the plate is sufficiently positive to attract all the space charge
electrons.
a. cut-off
c. grid leak
b. plate current saturation
d. hi-fi amplification
29. How can we extend the rating of SCR?
a. by external cooling
c. by connecting them in series or parallel
b. by external circuitry
d. all of the above
30. The amount of the opposition to the flow of electrons is ______.
a. more for an insulator than for a conductor
c. less for longer wire
b. less for thinner wire
d. more for a conductor
reluctivity
permeability
42. Specifies the number of standard loads that the output of the gate can drive
without impairment of its normal operation is called ______.
a. noise margin
c. fan - out
b. propagation delay
d. power dissipation
is normally ______.
same as class B
same as class A
a.
b.
2.5
0.02
c.
d.
0.4
50
c.
d.
57. What user program that has the ability to move a robot axis to any position
within its range?
a. point to point
c. continuous path
b. positive stop
d. pick and place
detection
d.
oscillator
c.
d.
67. ______ system are characterized by the ability to compare the actual value of
the controlled variable to its desired value and automatically take action based
on that comparison.
a. open loop
c. hexadecimal
b. closed loop
d. reciprocity
68. The number of degrees of an AC cycle during which the SCR turns ON.
a. obtuse angle
c. firing delay angle
b. stepping angle
d. conduction angle
69. The stationary part of a darsonval
a. permanent magnet
b. electromagnet
70. PET Scan means ______.
a. Positive Emission Tomography
b. Proton Emission Tomography
meter is ______.
c. soft iron
d. copper
c.
d.
surge protector
power thyristors
phot
foot-candle
continuous only
intermittent only
17
18
c.
d.
decoder
encoder
96. Developed in the early to mid 1970s this instrument is fast and patient
friendly and has the unique ability to image a combination of soft tissue, bone
ad blood vessels.
a. magnetic resonance imaging c. ultrasound
b. x-ray
d. computed axial tomography
97. The rotation frequency of a rotating machinery such as radar antennas can be
measured by ______.
a. tachometer
c. stroboscope
b. darsonal meter
d. vtvm
98. The power factor of a series LC circuit is always ______.
a. unity or zero
c. unity or leading
b. unity or lagging
d. lagging or leading
99. A discharge battery is charged at 8.0A for 2 hrs, after which it is discharged
through an unknown resistor. If discharged period is 6 hrs and the terminal
voltage remains fixed at 12 V find the value of the unknown resistor if
efficiency is 80%.
a.
b.
100.
a.
b.
5.6 ohms
6.5 ohms
c.
d.
5.5 ohms
6.6 ohms