Professional Documents
Culture Documents
constructive solutions
Areas of application
0.5L
1 kg
1L
2kg
5L
10 kg
20L
40 kg
For white colour - mix white cement, for other colours, add
cement compatible pigments to white cement.
Properties
Water absorption
1% maximum
30 min.
Application temperature
Toxicity
Non-toxic
Approx. 1 N/mm2
Specific Gravity/Density
Application
For best results, wet the surface before coating. Apply the mix
with a short, stiff bristle brush like a paint to an approximate
thickness of 1 to 2mm. During the first 12 hours of curing,
Hydroproof surface must be protected from abrasion, rain or
other adverse conditions. No traffic shall be allowed within
48 hours after application.
Application instructions
Preparation
Hydroproof
Neat cement
page 1 of 2
Hydroproof
Estimating
Storage
Packaging
Precautions
Coverage
Fosroc Chemicals
(India) Pvt. Ltd.
Head Office
Sapthagiri Palace, No.38,
II & III Floor, 12th Cross,
CBI Road, Ganganagar North,
Bangalore 560 032
Important note :
Fosroc products are guaranteed against defective materials and manufacture and are sold
subject to its standard terms and conditions of sale, copies of which may be obtained on
request. Whilst Fosroc endeavours to ensure that any advice, recommendation specification
or information it may give is accurate and correct, it cannot, because it has no direct or
continuous control over where or how its products are applied, accept any liability either
directly or indirectly arising from the use of its products whether or not in accordance with
any advice, specification, recommendation or information given by it.
telephone
fax
++91 80-23551500
++91 80-23551510
enquiryindia@fosroc.com
Regional Offices
Bangalore
Mumbai
Noida
Kolkata
1401/1402, 14 Floor,
A-WingThe Great Eastern Summit
Sector-15, CBD, Belapur
Navi Mumbai 400 614
Ph: 022 -43406800-04
D-166 Sector 10
Noida,
UP 201 301
Ph:0120-4270620
www.fosroc.com
page 2 of 2
INDIA/2011/716/C