Professional Documents
Culture Documents
Edition 2011-11_1
SikaGrout-215
SikaGrout-215
Construction
Product
Description
Uses
SikaGrout -215 is suitable for grouting works with clearances as low as 5 mm.
Characteristics /
Advantages
Product Data
Form
Appearance / Colour
Grey powder
SikaGrout-215
1/4
Packaging
25 kg bags
Storage
Storage Conditions /
Shelf Life
6 months from the date of production if stored properly in original, unopened and
undamaged sealed packaging in dry conditions at temperatures between +5C and
+40C. Protect from direct sunlight.
Technical Data
Wet Density
Aggregate Size
1.2 mm max.
Layer Thickness
Mechanical / Physical
Properties
Typical Results
Flow
BS Cone
JA Cone
Flowable
(Water content 4.2 ltr/
25 kg bag)
Pourable
(Water content 3.8 ltr/
25 kg bag)
~280 mm
~7 seconds
~250 mm
~22 seconds
4 h : 20 m
3 h : 40 m
~0.63 %
~0.35 %
~25 N/mm
2
~50 N/mm
2
~65 N/mm
~30 N/mm
2
~65 N/mm
2
~70 N/mm
Flexural strength
~5.8 N/mm
2
~7.9 N/mm
~6.4 N/mm
2
~8.3 N/mm
7 days
28 days
The above tests were conducted under laboratory conditions in accordance with
the following standards:
Bleeding & Expansion
ASTM C 940
Compressive strength
ASTM C 109
Flexural strength
BS 4551
The results above are typical data and given as a guide only. Site results may
differ according to mixing process, placing, curing, etc. Preliminary tests are
always recommended.
System Information
Application Details
Typical Yield
Flowable consistency
SikaGrout -215
1.84 kg
25 kg
74 x 25 kg bags
Water
0.31 ltr
4.2 ltr
309 ltr
Volume mortar
1 ltr
13.6 ltr
1m
1.90 kg
25 kg
76 x 25 kg bags
Pourable consistency
SikaGrout -215
Water
0.30 ltr
4.0 ltr
303 ltr
Volume mortar
1 ltr
13.2 ltr
1m
SikaGrout-215
2/4
Substrate Quality
Substrate Preparation
Application Conditions /
Limitations
Substrate Temperature
Ambient Temperature
Application Instructions
Mix Ratio
Consistency
Flowable
4.0 4.4
Pourable
3.6 4.0
Stiff
Mixing
bag of SikaGrout -215 into it while continuously mixing. Add the remaining water
until the desired consistency is obtained.
Mixing Time
Mix for 2 to 3 minutes with a slow speed drill (500 rpm max.).
Application Method /
Tools
Cleaning of Tools
Clean all tools and application equipment with water immediately after use.
Hardened and/or cured material can only be mechanically removed.
SikaGrout-215
3/4
Construction
Notes on Application /
Limitations
Curing Details
Curing
If formwork type repair is used, leave the formwork in place for at least 3 days.
Upon removal of the formwork, cure the exposed surfaces immediately with
Antisol-E curing compound or use other approved curing methods.
Value Base
All technical data stated in this Product Data Sheet are based on laboratory tests.
Actual measured data may vary due to circumstances beyond our control.
For information and advice on the safe handling, storage and disposal of chemical
products, users shall refer to the most recent Material Safety Data Sheet
(available on request) containing physical, ecological, toxicological and other
safety-related data.
Legal Notes
Phone: +606-7991762
Fax:
+606-7991980
e-mail: info@my.sika.com
www.sika.com.my
SikaGrout-215
4/4