You are on page 1of 3

[Overview]

In order to install the NSR 1000 series (NSR-1200/1100/1050H) software patch, kernel update
patch also should be installed after applying the normal software patch

[Preparation]
Please prepare the software update files and hardware
File name:
nsrpatch_v1.6.0.814.tar.bz2NSR 1000 series software patch file (V1.6.0)
kupd.1_6_0_814.iso: NSR 1000 series kernel update image file (V1.6.0)
Additional Hardware:
USB memory and DVD-R media
USB keyboard and mouse
Note1. Please prepare the two files and copy the software patch file to either USB or DVD(CD-R)
media, please write the kernel update image file to DVD-R blank media as iso image as booting
DVD media. Please update software patch file at first and update the kernel using the kernel
update image file. Please dont change the software patch file name while writing the software
patch file.
Note2: Please use the normal USB keyboard and mouse. Please dont use USB keyboard and
mouse which has some special key, button and stick.

[Install procedure]
Update steps:
Please update the files with this order:

1. nsrpatch_v1.6.0.814.tar.bz2NSR 1000 series software patch file (V1.6.0)


2. kupd.1_6_0_814.iso: NSR 1000 series kernel update image file (V1.6.0)

At first please update the software with NSR 1000 series software patch file. Regarding the detail
instruction of installing the software patch, please use the Administrator Menu and refer to the
NSR 1000 series user guide Chapter 2 Installing Patch File

Next, please apply the kernel update image patch, please follow the below instruction.
1. Please burn kupd_1_6_0_814.iso (kernel update image file) to a blank DVD-R media as the
boot DVD-R media with DVD writing software. Please put the DVD-R to the DVD drive, and
reboot the NSR
2. After rebooting, you can see the following message box, and please push [Yes] button

3. You can see the Kernel Update window and the kernel update will start

4. Then you can see the following message box within 1 minutes, so please push [OK]. The
DVD-R media will be ejected and the NSR will reboot again. Then The kernel update is
finished.

[Update confirmation]
a) Please confirm that the software version is v1.6.0.814
For the version confirmation of the software, please refer to the NSR 1000 series user guide

Chapter 3 Viewing Version Information


b) Please confirm the kernel update

After applying the kernel update image, you can confirm the update is done that from main menu
-> information -> detail information. Please also refer to the Chapter 3 Viewing Version
Information and push Detail information button.
Please confirm that Kernel Patch is shown as [NTP, ACPI] as following:

[Note]
1. Please dont force to turn off the NSR while applying the patch files.

You might also like