Professional Documents
Culture Documents
SA180x70
EuroPallet
The innovating profile SA180x68/70 is especially suitable for euro pallet handling. Thanks to its functionality
and manufacturing process, the SA180 has become a telescopic fork extremely versatile, reliable, robust,
and precise. It is possible to affirm that because Eurofork use the components that follow:
Fleyer chains with a nominal pitch of 9.525 mm, maximum pin diameter equal to 3.59 mm and 2x2
composition;
With its enlarged fixed body, the SA180 has many advantages:
The sensors are positioned into the frame, so they are protected from dirty and grit;
The accessibility of components permit an easier maintenance and fast replace possibility.
The typical applications foresee lengths from 1200 to 1350 mm up to 1200 Kg per set (of 2 forks) and it is
possible to work in applications with suction cups. The stroke control is typically made by encoder in the
forks axis (Z) and photocells for the central position control, but if requested it is possible to use proximity
and limit switches. The forks have rack-gear and chains with special constant tension system insuring
precision and reliability. We are available to provide optimal solutions for the needs of our clients.
1
EURO PALLET
Norm
DIN 15146
Depth D
1200 mm
1200 mm
1200 mm
Width W
800 mm
1000 mm
1200 mm
Tunnel Height TH
100 mm
100 mm
100 mm
Max overhang
Max weight
1200 kg
WAREHOUSE TYPE
1300
Length L
1250
1300
Stroke S
1375
1425
EUROPALLET [mm]
1200X800
1200X1000
1200X1200
372
570
570
FORK DESCRIPTION
EUROPALLET
[mm]
USL
Fork
Upper Slide
Typical
Maximum
Length
Length
Stroke
Stroke
1000
up to 1000
1100
1400
1100
up to 1100
1200
1540
1200
1200
1325
1680
1250
1250
1375
1750
USW
DBF
Slides
Distance
Height
between forks
180
68/70
free
180
68/70
free
180
68/70
372
Upper
Slide
Width
1300
1250
1425
1820
1350
1250
1475
1890
1400
up to 1400
1550
1960
180
68/70
free
1450
up to 1450
1600
2030
180
68/70
free
The SA180 is a fork particularly suitable for euro pallet handling. Nevertheless, it is possible to use it for a
lot of different applications. As you could see in the table above, there are only two fixed parameters that
are those reflect the effective overall dimensions of the mobile part of the fork. The first one is the height H
of the mobile slides that is equal to 68 or 70 millimeters respectively for the SA180x68 and the SA180x70.
The second one is the upper slide width USW that is equal to 180 millimeters. The name of the fork include
these two values for a better and faster understanding of the kind of fork. The other parameters can be
varied into specific ranges that were introduced in the same table.
The distance between fork DBF is a fixed parameter only for the euro pallet (372 mm). For other
applications it is possible to vary this distance into wide limits. There is also the possibility to product forks
with variable distance between forks (this could be obtained by moving only one or both forks) with the
addition of one gear motor and varying some structural elements.
Eurofork products could also have a lift system that is usually requested when the forks are mounted on
shuttles, AGVs or when the forks are used in other applications.
The DIN15146 establish that the maximum admissible load Q for euro pallet is 1200 kg. This value could be
exceeded in case of different load units but the load is in inverse proportion to the maximum stroke
permitted. Eurofork produce also the modified model of SA180, called type R; this fork could carry a load
of 1500 kg because it have bigger wheels mounted on the limit of the fixed body.
Obviously, higher loads corresponds to higher deflection of the fork when the sliding parts are at stroke.
Here there is an example of this fact that have to be taken into account.
Deflection graph example L=1300 S=1450