You are on page 1of 2

F46

F46 Oil Removal (Coalescing)


Filter 3/4", 1", and 1-1/4" Port Sizes
High efficiency oil and particle removal
Screw-on bowl reduces maintenance time
Can be disassembled without the use of tools or
removal from the air line
Standard service indicator turns from green to red
when the filter element needs to be replaced
NOTE: Install an F17 filter with a 5 m filter element upstream of the
F46 filter for maximum service life.

Ordering Information. Models listed include service indicator, automatic drain, metal bowl with sight glass, and PTF threads.
Port Size
3/4"
1"
1-1/4"

Model Numbers
F46-601-A0DA
F46-801-A0DA
F46-A01-A0DA

Maximum Flow* scfm (dm /s)


90 (42)
125 (59)
125 (59)

Weight lbs (kg)


4.11 (1.86)
4.05 (1.84)
4.29 (1.95)

* Maximum flow for oil-saturated element at 90 psig (6.3 bar) inlet pressure to maintain stated oil removal performance.

Alternative Models

F 4 6 - -

Port Size
3/4"
1"
1-1/4"

Substitute
6
8
A

Threads
PTF
ISO Rc taper
ISO G parallel

Substitute
A
B
G

Option
Not applicable

Substitute
0

Bowl
Metal with sight glass
Metal

Substitute
D
M

Element
Coalescing

Substitute
0

Drain
Automatic
Manual

Substitute
A
M

Service Life Indicator


Without
With (visual)
With (electrical)

Substitute
0
1
4

ISO Symbols

Automatic and
Semi Automatic Drain

ALE-2-14

See Section ALE-24 for Accessories

Manual Drain

Littleton, CO USA

Phone 303-794-2611

www.norgren.com

F46 Oil Removal (Coalescing) Filters


Technical Data
Fluid: Compressed air
Maximum pressure: 250 psig (17 bar )
Operating temperature:* -30 to 150F (-34 to 65C )
* Air supply must be dry enough to avoid ice formation at temperatures below 35F (2C)

Particle removal: Down to 0.01 m


Air quality: Within ISO 8573-1, Class 1 (particulates) and Class 2 (oil content)
Maximum remaining oil content in outlet air: 0.01ppm at 70F (20C) with an inlet
oil concentration of 17 ppm.
Maximum flow at 90 psig (6.3 bar) inlet pressure to maintain stated oil removal
performance:
3/4" ports: 90 scfm (42 dm3/s)
1" ports: 125 scfm (59 dm3/s)
1-1/4" ports: 125 scfm (59 dm3/s)
Nominal bowl size: 1 quart US (1 liter)
Manual drain connection: Will fit 1/8-27 and 1/8-28 pipe thread.
Automatic drain connection: Will fit 1/8-27 and 1/8-28 pipe thread. - Flexible tube
with 3/16" (5mm) minimum I.D. can be connected to the automatic drain. Drain
may fail to operate if the tube I.D. is less than 3/16" (5mm). Avoid restrictions in
the tube.
Automatic drain operating conditions (float operated)
Bowl pressure required to close drain: Greater than 5 psig (0.3 bar)
Bowl pressure required to open drain: Less than 3 psig (0.2 bar)
Minimum air flow required to close drain: 2 scfm (1 dm3/s)
Manual operation: Depress pin inside drain outlet to drain bowl
Materials
Body: Aluminum
Bowl: Aluminum
Bowl sight glass: Pyrex
Elastomers: Neoprene and nitrile
Filter element: Synthetic fiber and polyurethane foam
An automatic drain is a two-way valve, which will close when the system is
pressurized. The drain opens when the float rises due to accumulated liquid
and on depressurization.

psid

bar d

Typical Performance Characteristic


36 (2.5)

INLET PRESSURE:
psig (bar g)

58 (4.0) 90 (6.3) 116 (8.0)

150
(10.0)

PRESSURE DROP

5
0.3
4

0.2

2
0.1
1

PORT SIZE: 1"


ELEMENT: COALESCING, DRY

100

50

200

300

100

400

150

500

200

scfm

250

dm3/s

psid

bar d

AIR FLOW

INLET
PRESSURE:
psig (bar g)

36 (2.5) 58 (4.0) 90 (6.3) 116 (8.0) 150 (10.0)

PRESSURE DROP

5
0.3
4

0.2

Maximum flow to
maintain stated oil
removal performance

2
0.1
1

PORT SIZE: 1"


ELEMENT: COALESCING, OIL SATURATED

0
0

50
25

100
50

150

200

75

250

100

scfm

125

dm3/s

AIR FLOW

Service Kits

All Dimensions in Inches (mm)

Item
Service kit

4.75 (121)
4.32 (110)

Replacement drains

Type
O-ring, gaskets & element
Automatic (1/8 NPT outlet)
Manual (1/4 Turn)

Part number
5351-04
3000-18
619-50

Service kit contains coalescing element, element o-ring, bowl


o-ring, and drain gasket.

10.06 (256)

16.71 (424)**

17.29 (439)**

10.63 (270)

1.25
(32)

1.25
(32)

2.61
(66)

2.61
(66)

Service Indicator

Service Indicator

Automatic
Drain

Manual
Drain

2.40
(61)

2.40
(61)

** Minimum clearance required to remove bowl.

Littleton, CO USA

Phone 303-794-2611

www.norgren.com

ALE-2-15

You might also like