You are on page 1of 18

PARTS LIST

For
Hydraulic Drifter
Model: YH80A

Read this instruction manual before operating this equipment.

This manual contains important safety information.


Do not destroy this manual.
This manual must be available to the personnel who operate and maintain
this machine.

CPN 51989127

PL6105

PARTS LIST

INDEX
For

July 24, 1995

Hydraulic Drifter YH80A

PL6105
Index
Page 1 of 2

ORDERING INSTRUCTIONS
When ordering service parts, please specify:

1. The NAME of each part as listed.


2. The PART NUMBER as listed or stamped on the part.
3. The SERIAL NUMBER of the equipment.

SERIAL NUMBER IS STAMPED


IN THIS AREA.

SAVE THESE INSTRUCTIONS. DO NOT DESTROY.


All information, illustrations, and specifications in this parts list are based on the latest
information available at the time of publication. Product improvement is a continuing
goal at Ingersoll- Rand. Design and specifications are subject to change without notice
or obligation.
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.

NAME OF ASSEMBLY
Components of an assembly
are indented.

Each column includes the Parts List


Section Numbers applicable to the assembly.

Manual
No.

Section
No.

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PL6105

Hydraulic Drifter YH80A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PL6105

Reverse Percussion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PL6105

Rotation Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PL6036

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PL6105

Page 2, Index, PL6105

PARTS LIST

PL6105
INTRODUCTION

July 24, 1995

Section 1
Page 1 of 2

Alphabetical Index
Title

Page No.

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1. INTRODUCTION.
This parts list contains spare part numbers,
general model information and important
safety information for the Hydraulic Drifter
YH80A (hereafter referred to as drifter).
2. SAFETY FIRST.
SAFETY FIRST is the primary concern for
the protection of both, personnel and the
drifter during any phase of operation. All
personnel must thoroughly understand all
safety precautions before operating or doing any maintenance work on the drifter.
3. SAFETY PRECAUTIONS.
The Safety Precautions listed are intended
to make all personnel aware of the hazards
while working on or near a drifter. All personnel must use common sense and a
good working practice while operating and
maintaining this drifter. These safety precautions listed are of a general nature and
cannot cover every possible situation:
a. Do not attempt to operate the hydraulic
drifter unless you are thoroughly familiar
with all the crawler gauges, controls, and
functions. Refer to the section of the
crawler instruction book for detailed

1
1
1

instructions. Failure to comply could result


in bodily injury.
b. Always wear approved hard hat, safety
shoes, safety glasses, nose mask and ear
protection when near a drifter in operation.
c. Use only Ingersoll--Rand replace-ment parts.
d. Keep hands, arms, legs and clothing
away from all moving parts. Failure to
comply could result in bodily injury.
e. The drifter, striking bar, couplings, drill
steels and bit are hot during the drilling
operation. Do not touch these parts with
your bare hands. Wear gloves to protect
your hands when you are changing bits or
steels. A severe burn will result if rotating
parts are touched with bare hands.
f. Keep all hose connections tight. A
loose hose connection not only causes
leaks and poor performance, but may also
allow the hose to come off the drifter, whip
around, and injure the operator or other
people in the area.
g. Make sure that the parts--cleaning
solvent is non--flammable, will not harm the
skin, meets current safety and health
standards, and is used in well ventilated
area.

h. Dry nitrogen is the only gas product to


be used to charge the drifter accumulators.
Never use oxygen to charge the
accumulators. Ignition of an oxygen and oil
mixture could produce an explosion, which
could severely injure personnel in the area.
i. Be sure to bleed the accumulators
before any accumulator disassembly is

Page 2, Section 1, PL6015

attempted.
j. Make sure the accumulators are in
good condition.
Make sure the
accumulator components have no cracks
or signs of excessive wear.
When
pressurized, a damaged accumulator
could burst, scattering metal fragments
throughout the area which could severely
injure personnel.

Parts List

YH80A HYDRAULIC DRIFTER

Revision 2

PL6105

HP

Section 2

LP

HP

November 6, 1997

HYDRAULIC DRIFTER
(For Parts List, refer to Page 2)

Hydraulic Drifter YH80A (cont.)


(For Illustration of parts, refer to Page 1)
REF.
NO. PART NO.

QTY.

51964237

PART NAME
Hydraulic Drifter YH80A

1
2
3

51317196
51317204
51206068
50787738

1
1
1
1

ASSEMBLY, BACKHEAD
.BACKHEAD
.SUPPORTER, BLOW TUBE
.PLUG

4
v 5
v 6
7

50787753
51325041
51325058
51327716

1
1
1
1

.PLUG
.O--RING
O--RING
.PIN, SPRING

8
9
10
11

51313259
51165850
51176501
51175834

1
1
1
1

.BUSHING
.ADAPTER, HOSE
.ADAPTER
.PLUG

12

51162204
51206126
51206134
50748250

1
1
1
1

.SEAL
ASSEMBLY, BACKHEAD GLAND
.GLAND, BACKHEAD
.SEAL

15
16
v 17

51206639
51176543
51103778
51317246

1
1
1
1

.ADAPTER
.NUT, HOSE
.O--RING
ASSEMBLY, BLOW TUBE

18
19
20

51317253
51206167
51206175
53065215

1
1
1
1

.TUBE, BLOW
.RUBBER
.HOLDER, RUBBER
ASSEMBLY, CYLINDER

21
v 22
23
24

51317279
51104230
51153658
51165918

1
1
1
1

.CYLINDER
.O--RING
.BUSHING
ADAPTER, HOSE

25

51327773
50787043
53107207
51317303

1
2
1
1

.PLUG
O--RING
ASSEMBLY, CYLINDER LINER
.LINER, CYLINDER

29

51317311
53102539
51669976
51669984

2
1
1
1

.SEAL
.SEAL
ASSEMBLY, BACK LINER
.LINER, CYLINDER BACK

30
31

51325941
51317345

1
1

.O--RING
.SEAL

13
14

s 26
27
28

(continued)

Page 2, Section 2, PL6105

REMARKS

Hydraulic Drifter YH80A (cont.)


(For Illustration of parts, refer to Page 1)
REF.
NO. PART NO.

QTY.

51964237
32
33
34
v 35

PART NAME
Hydraulic Drifter YH80A (cont.)

51317352
51317360
51669992
51317386
51317394

1
1
1
1
1

.SEAL
,GUIDE
VALVE
PISTON
ASSEMBLY, FRONT LINER

51317402
51546026
51317428
52113122
51206381

1
1
1
3
1

.LINER, FRONT
.O--RING
.RING, WIPER
ASSEMBLY, ACCUMULATOR
.BODY

51206399
51206407
51176741
53113130
50748334

1
1
1
1
1

.COVER
.DIAPHRAGM
.VALVE
.WASHER
.CAP

47

51104198
51260032
51317444
53066577

1
4
1
1

.DIAPHRAGM
.BOLT
ASSEMBLY, HYDRAULIC MOTOR
.MOTOR, HYDRAULIC
REFER TO PL6105, SECTION 4

48
49
50
v 51
v 52

51124840
51124816
51165876
50787050
51176808

1
1
1
2
1

.ELBOW
.BUSHING
.ADAPTER, HOSE
.O--RING
.O--RING

53

51329308
51525988
51525996
51206498
51176477

4
1
1
1
1

.CAPSCREW
ASSEMBLY, GEAR BOX
.BOX, GEAR
BUSHING
.PIN, SPRING

51206084
51206514
51206522
50781962
51206530

1
1
1
2
1

.O--RING
ASSEMBLY, DRIVE GEAR
.GEAR, DRIVE
.BEARING, BALL
ASSEMBLY, IDLER GEAR

51206548
51206555
51206597
51104131
51206613

1
2
1
1
1

.GEAR, IDLER
.BEARING, NEEDLE
.SHAFT, GEAR
.O--RING
ASSEMBLY, COVER

s
36
37
38
39
40

[ 41
42

[ 43
44
v 45
46

54
55
56
v 57
58
59

60
61
62
v 63

REMARKS

(continued)

Page 3, Section 2, PL6105

Hydraulic Drifter YH80A (cont.)


(For Illustration of parts, refer to Page 1)
REF.
NO. PART NO.

QTY.

51964237
64
65
66

1
1
4
1
1

.COVER
.O--RING
.BOLT
ASSEMBLY, DRIVER
.DRIVER, CHUCK

51533107
++
++
51526002
51526010

1
1
1
1
1

.SET, BUSHING
..ALIGNER, SHANK
..BUSHING, SHANK
ASSEMBLY, CHUCK END
.END, CHUCK

51206712
51104289
51533073
51964138
51964146

1
1
1
1
1

.BUSHING
.O--RING
.CHUCK
ASSEMBLY, CAP
.CAP, CHUCK END

51964153
++
++
51104248
51275238

1
1
1
1
2

.LINER, CAP
..BUSHING
..LINER
.O--RING
.ASSEMBLY, BOLT

51275154
51206787
51317485
51317493
51525954

1
1
4
1
1

.BOLT
.NUT, NYLON
ASSEMBLY, THROUGH BOLT
.BOLT, THROUGH
.NUT

81
82
83

51103760
51206829
51206845
51268050
51206837

1
1
1
2
2

.O--RING
ASSEMBLY, EYE BOLT
.PLATE, HOOK
.BOLT
.BOLT, EYE

84

50855923

.WASHER, SPRING

68

69
70
71
72
73
74

v 75

76
77
78
79
v 80

REMARKS

Hydraulic Drifter YH80A (cont.)

51206621
51104198
50945385
51537165
51206662

67

PART NAME

NOTICE: THESE PARTS ARE INCLUDED IN DRIFTER O--RING KIT 51676237


NOTICE: THESE PARTS ARE INCLUDED IN DRIFTER SEAL KIT 51676245online

NOTICE: THESE PARTS ARE INCLUDED IN DIAPHRAGM KIT 51676252

Page 4, Section 2, PL6105

Revision 1
November 6, 1997

PL6105
REVERSE PERCUSSION KIT

Section 3
Page 1 of 2

Reverse Percussion Kit


(For Parts List, refer to Page 2)

PARTS LIST

REVERSE PERCUSSION KIT


(For Illustration of parts, refer to Page 1)

REF
NO.

PART
NO.

NAME OF PART
Parts indented under an item
are included with that item.

51975852

Reverse Percussion Kit

QTY.

(CONSISTS OF THE FOLLOWING)

83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
103
104
105
106
107
108
109
110
111

51526028
51526036
51104289
51206712
51533073
51964187
51264661
51964195
51104263
51333722
51264778
51264786
51333698
51264679
51161636
51156461
51264695
51264703
51964203
51964211
51104248
51325447
51325777
51964229
53115994
51264802
51264810
51264828
51176741
53113130
51176766
51104172
51203909
51328029

ASSEMBLY, CHUCK END


.END, CHUCK
.O--RING
.BUSHING, DU
CHUCK
ASSEMBLY, REVERSE HOUSING
.HOUSING, REVERSE
.LINER
.O--RING
ASSEMBLY, BOLT
.BOLT
.NUT, NYLON
ASSEMBLY, BOTTOM CYLINDER
.CYLINDER, BOTTOM
.O--RING
.RING, BACK-UP
.SEAL
.RING, WEAR
ASSEMBLY, TOP CYLINDER
.CYLINDER, TOP
.O--RING
.SEAL
.RING, WEAR
.PISTON
ASSEMBLY, ACCUMULATOR
.BODY, ACCUMULATOR
.COVER, ACCUMULATOR
.DIAPHRAGM
.VALVE
.WASHER, SEAL
.CAP
O--RING
.RING, BACK-UP
.BOLT

Page 6, Section 3, PL6105

1
1
1
1
1
1
1
1
1
4
1
1
1
1
1
1
2
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
4

REMARKS

PARTS LIST

PL6036
ROTATION MOTOR

January 21, 1994

Section 4
Page 1 of 2

Rotation Motor - Exploded Illustration


(For Parts List, refer to Page 2)

Rotation Motor
(For Illustration of parts, refer to Page 1)

REF
NO.

NAME OF PART
Parts indented under an item
are included with that item.

PART
NO.
51267623

QTY.

REMARKS

Rotation Motor
(CONSISTS OF THE FOLLOWING)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

17
18
19
20
21
22
23
24
25
26
27

51540847
51540870
51540896
51540904
51540912
51538999
51540938
51539005
51540953
51539021
51539013
51541001
51541019
51541035
51540987
51541084
51676260
51287746
NSS
NSS
NSS
NSS
51287738
NSS
NSS
NSS
NSS
NSS
NSS
NSS

HOUSING, BEARING
KIT, SHAFT/BEARING
PLATE, WEAR
DRIVE
GEROLER
DRIVE, VALVE
PLATE, VALVE
VALVE
PLATE, BALANCE
SPRING
PIN
HOUSING, VALVE
PLUG, BOSS
BALL, STEEL
PLUG, BOSS
BOLT
KIT, MOTOR SEAL
.KIT, SHAFT SEAL
..SEAL, DUST
.O--RING
.SEAL, OIL
.SEAL, SHAFT FACE
KIT, MOTOR REAR SEAL
.O--RING
.O--RING
.O--RING
.SEAL, OUTER FACE
.SEAL, INNER FACE
.O--RING
.O--RING

1
1
1
1
1
1
1
1
1
2
2
1
1
2
2
4
1
1
1
1
1
1
1
2
3
1
1
1
1
2

NSS NOTICE: THESE PARTS ARE NOT SOLD SEPARATELY, THEY ARE INCLUDED IN THE KIT
IN WHICH THEY ARE INDENTED UNDER.

Page 8, Section 4, PL6036

PARTS LIST

PL6105
GENERAL INFORMATION

July 24, 1995


GENERAL.
The YH80A Hydraulic Drifter (drifter) is a
valved, hydraulically--operated hammer
drill that incorporates an integral, independently--controlled, hydraulically--powered
rotation motor to rotate the drill steel and
bit.
The drifter is capable of drilling 3 to 4 in. (75
to 102 mm) diameter holes in all types of
rock formations. It is especially suitable for
pipeline work, drilling vertical and angle
holes in quarries, and on any construction
jobs where large volume rock excavations
are required.
ROTATION MOTOR.
The hydraulically--powered rotation motor
is independently controlled and is designed to provide continuous drill steel rotation -- forward or reverse. The motor converts hydraulic fluid to rotation power and
transmits the rotation power to the spur
gear train housed in the drifter fronthead.
The hydraulic rotation motor provides
smooth, powerful rotation, especially at low
rotation speeds, and assures the operator
of positive rotation control under all drilling
conditions.

Section 5
Page 1 of 2

equipped with chuck parts to accommodate a 8--spline striking bar.


ACCUMULATORS.
The drifter uses three built--in nitrogen-charged, diaphragm--type accumulators to
dampen vibrations in the supply and return
lines. The high pressure accumulators
must be charged to 853 psi (60 kg/cm2)
and the low pressure accumulators must
be charged to 57 psi (4 kg/cm2).

An accumulator charging kit is furnished as an accessory item with the


machine on which the drifter is used.
FRONT END LUBRICATION.
The drifter uses an oil mist to provide lubrication to all critical points in the front end of
the drifter. A 3/8 in. (9.5 mm) diameter
hose line connected to the drifter carries
the oil--laden air from a lubricator (part of
the drilling machine) to the drifter front end
parts. Oil flow is controlled by the lubricator
located on the drilling machine.

BLOWER TUBE.
The drifter has a single blower tube construction. The blower tube carries hole
cleaning air from the inlet connection in the
backhead, through the center of the drifter,
striking bar, steel and bit to the bottom of
the hole without contacting any of the internal parts of the drifter.
CHUCK PARTS.
The standard drifter is equipped with chuck
parts to accommodate a 6--spline striking
bar. The reverse percussion drifter is

Refer to IM6105, Instruction Manual


For Hydraulic Drifter Model YH80A for
maintenance instructions.
REVERSE PERCUSSION OPTION.
(Furnished Only When Specially Ordered)
The standard drifter does not include reverse percussion as standard equipement.
The reverse percussion kit must be ordered separately. Refer to Section 3 of this
parts list for part numbers.

STRIKING BARS. (Furnished Only When


Specially Ordered) (Table 1)
The drifter does not include a striking bar

as standard equipment. The striking bar


must be specially ordered. Table 1 lists the
available striking bars for use with the drifter.

Table 1. Striking Bars


Striking Bar

Striking Bar Specifications

SB38YH80A
(53061370)

6--SPLINE DRIVE
3/4 DIA. BLOWER TUBE
T38 MALE THREAD

STD

z SB38YH80ARP
(53061388)

6--SPLINE DRIVE
3/4 DIA. BLOWER TUBE
T38 MALE THREAD

RP

SB45YH80A
(51959328)

6--SPLINE DRIVE
3/4 DIA. BLOWER TUBE
T45 MALE THREAD

STD

z SB45YH80ARP
(51993913)

6--SPLINE DRIVE
3/4 DIA. BLOWER TUBE
T45 MALE THREAD

RP

SB51YH80A
(51993970)

6--SPLINE DRIVE
3/4 DIA. BLOWER TUBE
T51 MALE THREAD

STD

z SB51YH80ARP
(51993947)

6--SPLINE DRIVE
3/4 DIA. BLOWER TUBE
T51 MALE THREAD

RP

NOTICE: Use the 8--digit part number when ordering the required
striking bar.
NOTICE: This striking bar is for use ONLY with the reverse percussion
option.

Page 2, Section 5, PL6105

Atlas Copco Drilling Solutions, LLC


A Company Within the Atlas Copco Group
P.O. Box 462288, 2100 North First Street
www.atlascopco.com/drillingsolutions

You might also like