Professional Documents
Culture Documents
>
- <cw:vessel version="1.07.0071" creationDate="2015-04-30"
xmlns:cw="urn:PressureVessel">
- <!-saved from url=(0024)http://www.codeware.com/
-->
- <pressureVessel>
- <revisions>
- <revision>
<revNumber>0</revNumber>
<revDate>2015-04-22</revDate>
<operator>shindede</operator>
<notes>New vessel created with Vessel Wizard, ASME Section VIII Division 1
[COMPRESS 2015 Build 7500]</notes>
</revision>
</revisions>
- <generalVesselInfo>
<identifier>D-712</identifier>
<location>BATON ROUGE, LA</location>
<purchaser>EXXONMOBIL</purchaser>
<service>RHLA-1 CONDENSATE DRUM</service>
<tagNumber>D-712</tagNumber>
- <!-Design Code Info
-->
<designCode>ASME Section VIII Division 1</designCode>
<designCodeEdition>2013</designCodeEdition>
- <!-Vessel Data
-->
<units>U.S. Customary</units>
<orientation>Vertical</orientation>
<tangentToTangentLength units="in">196.0000</tangentToTangentLength>
<structureHeight units="in">261.0000</structureHeight>
<outerDiameter units="in">48.8750</outerDiameter>
<datumOffsetFrom>Bottom Shell Seam</datumOffsetFrom>
<datumOffset units="in">0.0000</datumOffset>
- <!-Use [Component Elevation - DatumElevation] to get elevation from user datum
-->
<datumElevation units="in">0.0000</datumElevation>
</generalVesselInfo>
- <pressureChamberConditions>
<identifier>Chamber bounded by Bottom Head and Top Head</identifier>
<MAWP units="psi">150.0000</MAWP>
<MAWPTemperature units="degF">450.0000</MAWPTemperature>
<compGoverningChamberMAWP>Legs #1</compGoverningChamberMAWP>
<MAP units="psi">246.6141</MAP>
<MAPTemperature units="degF">70.0000</MAPTemperature>
<compGoverningChamberMAP>MANWAY (M)</compGoverningChamberMAP>
<MAEP units="psi">16.5438</MAEP>
<MAEPTemperature units="degF">450.0000</MAEPTemperature>
<compGoverningChamberMAEP>MANWAY (M)</compGoverningChamberMAEP>
<MDMT units="degF">-52.3640</MDMT>
<designMDMT units="degF">-20.0000</designMDMT>
<hydrostaticTestPressure units="psi">195.0000</hydrostaticTestPressure>
<designPressure units="psi">150.0000</designPressure>
<designTemperature units="degF">450.0000</designTemperature>
<externalPressure units="psi">15.0000</externalPressure>
<externalTemperature units="degF">450.0000</externalTemperature>
<innerCorrosion units="in">0.1250</innerCorrosion>
<outerCorrosion units="in">0.0000</outerCorrosion>
<RT>RT1</RT>
<PWHT>None</PWHT>
<materials>
<cylinders>SA-516 70</cylinders>
<heads>SA-516 70</heads>
<support>SA-516 70</support>
<transitions>SA-516 70</transitions>
</materials>
</pressureChamberConditions>
<vesselResults>
<weightOperatingCorroded units="lbf">14333.1530</weightOperatingCorroded>
<weightOperatingNew units="lbf">15505.4627</weightOperatingNew>
<weightEmptyCorroded units="lbf">4409.0911</weightEmptyCorroded>
<weightEmptyNew units="lbf">5691.4971</weightEmptyNew>
<weightTestNew units="lbf">19747.1330</weightTestNew>
<capacityNew units="US_gal">1685.6454</capacityNew>
<capacityCorroded units="US_gal">1705.1518</capacityCorroded>
<liquidWeightOperating units="lbf">9924.0620</liquidWeightOperating>
<liquidWeightOperatingNew units="lbf">9813.9656</liquidWeightOperatingNew>
<liquidWeightTest units="lbf">14055.6359</liquidWeightTest>
<liquidWeightTestCorroded units="lbf">14218.2888</liquidWeightTestCorroded>
<centerOfGravityFromDatum units="in">91.2053</centerOfGravityFromDatum>
<note>Vessel designed by COMPRESS software by Codeware Inc.</note>
</vesselResults>
<closure1>
<topClosure>
<ellipsoidalHead>
<standardComponentData>
- <!-Standard Component Data
-->
<identifier>Top Head</identifier>
<idNumber>1429676107</idNumber>
<attachedTo>Cylinder #1</attachedTo>
<attachedToKind>Cylinder</attachedToKind>
<attachedToidNumber>1429676110</attachedToidNumber>
<material>SA-516 70</material>
- <material2>
<specification>SA-516 70</specification>
<definition>Full ASME</definition>
<density units="lb/ft3">489.0240</density>
<productForm>Plate</productForm>
<impactTested>FALSE</impactTested>
<normalized>FALSE</normalized>
<fineGrainPractice>FALSE</fineGrainPractice>
<xref lineNumber="6" pageNumber="22" />
</material2>
<outerDiameterDesign>FALSE</outerDiameterDesign>
<innerDiameter units="in">48.0000</innerDiameter>
<outerDiameter units="in">48.8750</outerDiameter>
<innerCorrosion units="in">0.1250</innerCorrosion>
<outerCorrosion units="in">0.0000</outerCorrosion>
<nominalThickness units="in">0.4375</nominalThickness>
<length units="in">14.4375</length>
<designPressure units="psi">150.0000</designPressure>
<designTemperature units="degF">450.0000</designTemperature>
<externalPressure units="psi">15.0000</externalPressure>
<externalTemperature units="degF">450.0000</externalTemperature>
<designMDMT units="degF">-20.0000</designMDMT>
<staticHeadOperating units="psi">0.0000</staticHeadOperating>
<staticHeadOperatingPlusDesignP units="psi">150.0000</staticHeadOperatingPlusDesignP>
<radiographyLongSeam>Seamless No RT</radiographyLongSeam>
<radiographyCircSeam>Full UW-11(a) Type 1</radiographyCircSeam>
<postWeldHeatTreatment>FALSE</postWeldHeatTreatment>
<impactTested>FALSE</impactTested>
<normalized>FALSE</normalized>
- <!-Results
-->
<startElevation units="in">192.0000</startElevation>
<endElevation units="in">206.4375</endElevation>
<designThicknessInternalPressure units="in">0.3049</designThicknessInternalPressure>
<designThicknessExternalPressure units="in">0.2537</designThicknessExternalPressure>
<designThickness units="in">0.3049</designThickness>
<requiredThicknessInternalPressure units="in">0.1799</requiredThicknessInternalPressure>
<requiredThicknessExternalPressure
units="in">0.1287</requiredThicknessExternalPressure>
<requiredThickness units="in">0.1799</requiredThickness>
<governingLoadCondition>Internal</governingLoadCondition>
<MAWP units="psi">257.0694</MAWP>
<MAP units="psi">360.6388</MAP>
<MAEP units="psi">17.5479</MAEP>
<MDMT units="degF">-55.0000</MDMT>
<weightNew units="lbf">373.8241</weightNew>
<weightCorroded units="lbf">268.6291</weightCorroded>
<capacityNew units="US_gal">78.3358</capacityNew>
<capacityCorroded units="US_gal">79.8136</capacityCorroded>
</standardComponentData>
<straightFlangeLength units="in">2.0000</straightFlangeLength>
<straightFlangeNominalThickness units="in">0.4375</straightFlangeNominalThickness>
<straightFlangeInnerDiameter units="in">48.0000</straightFlangeInnerDiameter>
<straightFlangeOuterDiameter units="in">48.8750</straightFlangeOuterDiameter>
<straightFlangeStaticHeadOperating
units="psi">0.0000</straightFlangeStaticHeadOperating>
<straightFlangeStaticHeadOperatingPlusDesignP
units="psi">150.0000</straightFlangeStaticHeadOperatingPlusDesignP>
<ellipsoidalHeadRatio2>2</ellipsoidalHeadRatio2>
<ellipsoidalHeadRatio>2:1</ellipsoidalHeadRatio>
</ellipsoidalHead>
- <nozzle>
- <standardComponentData>
- <!-Standard Component Data
-->
<identifier>STEAM OUTLET (C)</identifier>
<idNumber>1430367320</idNumber>
<attachedTo>Top Head</attachedTo>
<attachedToKind>Ellipsoidal Head</attachedToKind>
<attachedToidNumber>1429676107</attachedToidNumber>
<material>SA-106 B Smls pipe</material>
- <material2>
<specification>SA-106 B Smls pipe</specification>
<definition>Full ASME</definition>
<density units="lb/ft3">489.0240</density>
<productForm>Smls. Pipe</productForm>
<impactTested>FALSE</impactTested>
<normalized>FALSE</normalized>
<fineGrainPractice>FALSE</fineGrainPractice>
<xref lineNumber="19" pageNumber="14" />
</material2>
<outerDiameterDesign>TRUE</outerDiameterDesign>
<innerDiameter units="in">11.3740</innerDiameter>
<outerDiameter units="in">12.7500</outerDiameter>
<innerCorrosion units="in">0.1250</innerCorrosion>
<outerCorrosion units="in">0.0000</outerCorrosion>
<nominalThickness units="in">0.6880</nominalThickness>
<pipeNPSandSchedule>NPS 12 Sch 80</pipeNPSandSchedule>
<length units="in">12.9307</length>
<designPressure units="psi">150.0000</designPressure>
<designTemperature units="degF">450.0000</designTemperature>
<externalPressure units="psi">15.0000</externalPressure>
<externalTemperature units="degF">450.0000</externalTemperature>
<designMDMT units="degF">-20.0000</designMDMT>
<staticHeadOperating units="psi">0.0000</staticHeadOperating>
<staticHeadOperatingPlusDesignP units="psi">150.0000</staticHeadOperatingPlusDesignP>
<radiographyLongSeam>Seamless No RT</radiographyLongSeam>
<radiographyCircSeam>Full UW-11(a) Type 1</radiographyCircSeam>
<postWeldHeatTreatment>FALSE</postWeldHeatTreatment>
<impactTested>FALSE</impactTested>
<normalized>FALSE</normalized>
- <!-Results
-->
<startElevation units="in">210.0693</startElevation>
<endElevation units="in">223.0000</endElevation>
<designThicknessInternalPressure units="in">0.0000</designThicknessInternalPressure>
<designThicknessExternalPressure units="in">0.0000</designThicknessExternalPressure>
<designThickness units="in">0.0000</designThickness>
<requiredThicknessInternalPressure units="in">0.0000</requiredThicknessInternalPressure>
<requiredThicknessExternalPressure
units="in">0.0000</requiredThicknessExternalPressure>
<requiredThickness units="in">0.0000</requiredThickness>
<governingLoadCondition>Unknown</governingLoadCondition>
<MAWP units="psi">185.0000</MAWP>
<MAP units="psi">283.4280</MAP>
<MAEP units="psi">17.5479</MAEP>
<MDMT units="degF">-55.0000</MDMT>
<weightNew units="lbf">99.3419</weightNew>
<weightCorroded units="lbf">82.0549</weightCorroded>
<capacityNew units="US_gal">5.3057</capacityNew>
<capacityCorroded units="US_gal">5.5415</capacityCorroded>
</standardComponentData>
- <!-Nozzle Specific Data
-->
<nozzleType>2</nozzleType>
<nozzleTypeDescription>Type 2 - Pad, no internal projection, UW16.1(q)</nozzleTypeDescription>
<drawingMark>C</drawingMark>
<attachedTo>Top Head</attachedTo>
<quantityToCost>1</quantityToCost>
<orientation>Radial</orientation>
<orientationAngle units="deg">0.0000</orientationAngle>
<tippingAngle units="deg">0.0000</tippingAngle>
<radialDistance units="in">0.0000</radialDistance>
<minimumInternalProjection units="in">0.0000</minimumInternalProjection>
<intersectionPointX units="in">0.0000</intersectionPointX>
<intersectionPointY units="in">0.0000</intersectionPointY>
<intersectionPointZ units="in">206.4375</intersectionPointZ>
<endPointX units="in">0.0000</endPointX>
<endPointY units="in">0.0000</endPointY>
<endPointZ units="in">223.0000</endPointZ>
<lclIntersectionPointX units="in">0.0000</lclIntersectionPointX>
<lclIntersectionPointY units="in">0.0000</lclIntersectionPointY>
<lclIntersectionPointZ units="in">14.4375</lclIntersectionPointZ>
<lclEndPointX units="in">0.0000</lclEndPointX>
<lclEndPointY units="in">-0.0000</lclEndPointY>
<lclEndPointZ units="in">26.5000</lclEndPointZ>
<offset units="in">0.0000</offset>
<nozzleService>Nozzle</nozzleService>
- <reinforcingPad>
- <reinforcingPadMaterial>
<specification>SA-516 70</specification>
<density units="lb/ft3">489.0240</density>
<productForm>Plate</productForm>
B = 3,317.7143 psi
50/262
VENT (V)
ASME Section VIII Division 1, 2013 Edition
Note: round inside edges per UG-76(c)
Location and Orientation
Located on Top Head
Orientation 0
End of nozzle to datum line 212"
Calculated as hillside Yes
Distance to head center, R 20"
Passes through a Category A joint No
Nozzle
Description NPS 6 (Thk = 0.375")
Access opening No
Material specification SA-106 B Smls pipe (II-D p. 14, ln. 19)
Inside diameter, new 5.875"
Nominal wall thickness 0.375"
Corrosion allowance 0.125"
Opening chord length 7.9106"
Projection available outside vessel, Lpr 5.4138"
Projection available outside vessel to flange face, Lf 8.9138"
Local vessel minimum thickness 0.4375"
Liquid static head included 0 psi
Longitudinal joint efficiency 1
Reinforcing Pad
Material specification SA-516 70 (II-D p. 22, ln. 6)
51/262
Diameter, Dp 11.4603"
Thickness, te 0.4375"
Is split No
Welds
Inner Fillet, Leg41 0.5"
Outer Fillet, Leg42 0.325"
Nozzle to vessel groove weld 0.375"
Pad groove weld 0.375"
ASME B16.5-2009 Flange
Description NPS 6 Class 150 WN A105
Bolt Material
SA-193 B7 Bolt <= 2 1/2 (II-D p.
352, ln. 31)
Blind included No
Rated MDMT -55F
Liquid static head 0 psi
MAWP rating 185 psi @ 450F
MAP rating 285 psi @ 70F
Hydrotest rating 450 psi @ 70F
PWHT performed No
Impact Tested No
Circumferential joint radiography Full UW-11(a) Type 1
Notes
Flange rated MDMT per UCS-66(b)(1)(b) = -55F (Coincident ratio = 0.5263)
Bolts rated MDMT per Fig UCS-66 note (c) = -55F
UCS-66 Material Toughness Requirements Nozzle
tr = 150*3.0625 / (17,100*1 - 0.6*150) = 0.027"
Stress ratio = tr*E* / (tn - c) = 0.027*1 / (0.3281 - 0.125) = 0.133
Stress ratio # 0.35, MDMT per UCS-66(b)(3) = -155F
Material is exempt from impact testing at the Design MDMT of -20F.
52/262
UCS-66 Material Toughness Requirements Pad
Governing thickness, tg = 0.4375"
Exemption temperature from Fig UCS-66 Curve B = -13F
tr = 150*48.25*0.993145 / (2*20,000*1 - 0.2*150) = 0.1798"
Stress ratio = tr*E* / (tn - c) = 0.1798*1 / (0.4375 - 0.125) = 0.5755
Reduction in MDMT, TR from Fig UCS-66.1 = 45.1F
MDMT = max[ MDMT - TR, -55] = max[ -13 - 45.1 , -55] = -55F
Material is exempt from impact testing at the Design MDMT of -20F.
53/262
Reinforcement Calculations for MAWP
The thickness requirements of UG-45 govern the MAWP of this nozzle.
UG-37 Area Calculation Summary (in2)
UG-45
Summary (in)
For P = 169.43 psi @ 450 F
The opening is adequately reinforced
The nozzle passes
UG-45
A
required
A
available
A1 A2 A3 A5
A
welds
treq tmin
Required weld
size (in)
Actual weld
size (in)
Status
Nozzle to pad fillet (Leg41) 0.175
54/262
= 17.55 psi
Design thickness for external pressure Pa = 17.55 psi
ta = t + Corrosion = 0.0506 + 0.125 = 0.1756"
50/262