Professional Documents
Culture Documents
PRODUCTS
PAGE
126
138
140
Biodegradeable Products
143
Admixtures
144
145
148
149
Chemicals,
Sealants & Fillers
126
380 Cartridges
Coverage*
Joint size (mm)
Litre/metre run
5x5
0.025
15.2
10 x 10
0.1
3.8
15 x 10
0.15
2.5
15 x 15
0.23
1.6
20 x 15
0.3
1.2
20 x 20
0.4
0.95
*These are theoretical yields, no allowance has been made for variation in joint dimensions
or wastage.
Arbokol (Polysulphide/Epoxy)
Arbokol 1000
A one-part Polysulphide Sealant, recommended for use in many forms of construction including
structural joints in heavy cladding and perimeter sealing of timber frames. Which cures on
exposure to moisture vapour to form a firm but flexible rubber. Colours: White, Black, Grey, Teak.
Arbokol 1025 SP
A two-part Epoxy Sealant recommended stress relieving joints in tiled floors and swimming pools
(can be applied underwater). Colours: Grey or Off White.
Arbokol 2150
A two-part Polysulphide sealant, which when mixed cures to form a hard wearing flexible rubber
seal. It has good adhesion to concrete, stone, metals, ceramics and many other common
construction substrates. It is recommended for sealing joints in flat roofs and heavily trafficked
floor joints.
Arbokol AG1
A one-part polysulphide which cures on exposure to moisture vapour to form a firm but flexible
rubber. It is recommended for expansion joints in brickwork and blockwork.
Arbokol AG2
A two-part Polysulphide Sealant, recommended for sealing structural floor joints, parapet wall
joints, joints in metal and concrete sea walls and joints in water retaining structures (including
potable water).
When the components are mixed together, it cures to form a flexible rubber seal. It has good
adhesion to concrete, stone, metals and many other common building substrates.
Chemicals,
Sealants & Fillers
A two-part Polysulphide Sealant, recommended for sealing structural floor joints, road joints,
runway aprons and runways. When the components are mixed together it cures to form a
flexible rubber seal. It has good adhesion to concrete, stone, metals and many other common
building substrates.
Arbokol
Type
Size
Arbokol 1000
Arbokol 1025 SP
Arbo 2150
2 litre packs
Arbokol AG1
380ml cartridges
Arbokol AG2
5 litre packs
www.sigscp.co.uk
127
Arbosil
Arbo 2020
A flexible three-pack Epoxy Sealant for use against both dry and damp surfaces. Recommended
for sealing floor joints in internal situations e.g. kitchens, food-processing areas, abattoirs, etc. It
has good adhesion to concrete, glass and many other common building substrates curing to a
tough sealant with good resistance to traffic loads. Colours: Bright Red, Stone, Oatmeal, Maize,
Buff, Light Brown, Grey, Black.
Arbosil 1070
One-part Low Modulus, Fire Resisting Silicone Sealant, recommended for sealing expansion joints
and other details in walls or screens intended to prevent the passage of fire. Fire resistance in
excess of 4 hours has been achieved. Cures on exposure to moisture vapour to form a very
elastic silicone rubber. It has good adhesion to concrete, stone, metals and many other common
building substrates.
Arbosil 1071
One-part Low Modulus, Fire Resisting Silicone Sealant, recommended for perimeter sealing of fire
doors and screens. High movement fire-resistant joints. Fire retardant glazing in conjunction with
Arboseal Intumescent Tape. Cures on exposure to moisture vapour to form a very elastic silicone
rubber. It has good adhesion to concrete, metals and many other common building substrates.
Arbosil 1081
One-part Acetoxy Cure Silicone Sealant, recommended for use in sanitary applications, sealing
wall joints formed in ceramic tiles in bathrooms and kitchens and perimeter joints formed around
PVCU frames. Cures rapidly on exposure to moisture vapour to form a resilient elastic silicone
rubber. Arbosil 1081 White contains a fungicide to help reduce the incidence of mould growth
on the sealant when used in bathrooms, kitchens etc. Colours:
White (contains a fungicide), Black, Translucent.
Arbosil 1090
One-part Low Modulus Neutral Cure Silicone Sealant, recommended for use in many forms of
construction including curtain walling, remedial perimeter sealing, structural joints in light
cladding, profiled metal roof sheets, joints in flat roofs and gutter joints. Cures on exposure to
moisture vapour to form a very elastic silicone rubber. Colours; Black, Buff, Dark Bronze, Grey,
Portland, Rustic Red, Teak.
Arbosil 1096
One-part Low Modulus Neutral Cure Silicone Sealant, recommended for use in many forms of
construction including glass wall assemblies, perimeter seals on curtain walling, perimeter sealing
of polyester powder coated frames and glazing of windows in swimming pool buildings. Cures
on exposure to moisture vapour to form an elastic silicone rubber. Colours: White, Black, Grey,
Mahogany, Translucent, Anthracite.
Arbosil XL 1099
One-part Low Modulus Neutral Cure Natural Stone Silicone Sealant, recommended for use in
many forms of construction but is specifically designed for use against natural stone. Cures on
exposure to moisture vapour to form an elastic silicone rubber. Colours: White, Black, Grey,
Limestone, Portland, Rustic Red, Buff.
Arbosil FM
One-part Low Modulus Neutral Cure Silicone Sealant, recommended for perimeter sealing of
UPVC frames, sealing joints in translucent roofing sheets and lap joints in profiled metal sheets.
Cures on exposure to moisture vapour to form an elastic silicone rubber. Arbosil FM is compatible
with many substrates such as concrete, galvanised steel and lead. Colours: White, Brown, Oak.
Arbosil HM
Arbosil Sealants
Type
Arbo 2020
Size
Arbosil 1070
Arbosil 1071
Arbosil 1081
Arbosil 1090
Arbosil 1096
Arbosil 1099
Arbosil FM
Arbosil HM
Chemicals,
Sealants & Fillers
A one-part High Modulus Acetoxy Silicone sealant, which cures rapidly on exposure to water
vapour to form a resilient elastic silicone rubber it contains a fungicide to reduce the incidence of
mould growth. It is recommended for the sealing of aluminium sheets and components.
128
Cleaners
Arbo Cleaner No.13 1 Litre tin.
(Toluene based not suitable for use with plastics or delicate finishes).
Arbo Cleaner No.16 1 Litre tin (Alcohol based).
Equipment
Polyethylene nozzles.
Arbo Caulking Guns.
10
1100
15
500
20
300
25
200
30
150
50
50
Compriband
Compriband VSA and Super form part of a specialist range of joint sealants designed to cope
with movement caused, for example by temperature changes, settlement, vibration or wind.
Compriband VSA
A bituminised foamed polyurethane sealing strip of great elasticity which can accept extreme
compression without sideways expansion.
Compriband Super
Expanded polyurethane foam impregnated with waxes and neoprene to form a high quality, low
cost and efficient strip sealant.
Chemicals,
Sealants & Fillers
10
10
2-3
10
15
3-4
15
20
4-5
15
25
5-6
15
30
7-8
20
40
10
9 - 10
25
50
12
10 - 12
30
60
16
14 - 16
40
80
20
17 - 20
50
100
25
22 - 25
60
120/125
www.sigscp.co.uk
129
Aerofil
Aerofil 1
Aerofil 1 is a low compression natural white, inert, preformed, closed cell, polyethylene joint filler
in sheet form suitable for structural movement joints in concrete, brick and blockwork.
Aerofil 2
A high density closed cell polyethylene filler for critical movement joints in civil / structural works
and water retaining structures.
Aerofil
Type
Size (m)
Thickness (mm)
Aerofil 1
0.8 x 2 (1.6m )
Aerofil 2
0.8 x 2 (1.6m2)
Thickness (mm)
2
1m x 2m = 2m2
Thickness (mm)
20, 25
Thickness (mm)
10, 12, 15
Thickness (mm)
Thickness (mm)
Fibreboard Strip
A compressible, non-extruding, bitumen impregnated, fibreboard expansion joint filler strip
suitable for forming joints between in-situ and pre-cast concrete components. Available in 12, 20
and 25mm thicknesses.
Fibreboard Strip
Slab Depth (mm)
1200 x 2440
Chemicals,
Sealants & Fillers
130
Thickness (mm)
12, 20, 25
Cork Sheets
Cork Strips
Thickness (mm)
Width (mm)
Thickness (mm)
175
200
225
250
Korkpak
A robust bitumen bonded cork filler.
Korkpak
Type
Size (m)
Thickness (mm)
Korkpak
1x2
Ancillaries
Type
Pak Adhesive
Servitape
Size
Coverage
5 litres
Contact Adhesive
Chemicals,
Sealants & Fillers
High quality adhesive for bonding filler boards, polystyrene, insulation and protection boards to a
wide range of surfaces.
Contact Adhesive
Size
5 litre can
Expandafoam
A closed-cell polyethylene joint filler for use as an expansion joint filler in brick and blockwork,
isolation joints and hinge joints where a readily compressible low load transfer joint filler is
required. Available in 10, 12, 20 and 25mm thicknesses.
Expandafoam
Slab Depth (mm)
www.sigscp.co.uk
131
Hydrocell XL
Hydrocell XL is a polyethylene sheet material used for forming or filling expansion joints in
concrete, brickwork and blockwork. It gives excellent support to sealants subject to hydrostatic
pressure. Hydrocell XL is WRAS approved and is typically used in potable water reservoirs, culverts
and canals, sewage tanks, roadways and hardstandings, retaining walls, basements structures,
subways, runways, taxiways and aprons.
Hydrocell XL supplied in the following sheet sizes and can be easily cut to the required size with
a Stanley knife or saw.
Hydrocell XL
Type
Size (m)
Hydrocell XL
1x2
Pliastic
Pliastic N2 and 77 are hot-poured rubber bitumen joint sealants. Pliastic N2 is a low extension
grade for sealing joints in concrete pavements, floor slabs, water retaining and water excluding
strucutres. Pliastic 77 is a hard grade for sealing low movement joints in factory floors and areas
where joints are closely spaced and resistance to grit and traffic is of prime importance.
Pliastic
Type
Size (kg)
Pliastic N2
15
Pliastic 77
15
Nitoseal
Nitoseal MS100
Nitoseal MS100 is a one-part primerless non-staining faade sealant. It is used for sealing joints
in and around concrete, brick, masonry, pre-cast panels, stone cladding, windows, doors and
fibre cement sheeting. MS100 is available in white, grey, black, portland, buff and rustic red.
Damp tolerant application.
Nitoseal MS300
Nitoseal MS300 is a one-part, abrasion resistant floor joint sealant. It is used for sealing
movement joints in factory floors, sports stadia terracing, shopping centres, warehouse and
distribution depots and concrete hardstanding areas. MS300 is fast curing and is ideal for
trafficked joints. Available in grey only. Damp tolerant application.
Nitoseal MS50
Nitoseal MS50 is a one-part general purpose building sealant. It is suitable for sealing joints in
concrete brickwork, blockwork, perimeter sealing around doors and windows and for nontrafficked floor joints. MS50 is available in white, grey, black, magnolia, buff, portland, rustic red,
brown and anthracite. Damp tolerant application.
Nitoseal MS600
Nitoseal MS600 is a one-part civil engineering sealant for immersed conditions. It is suitable for
sealing movement joints that will be intermittently or permanently under water. MS600 is
typically used in reservoirs, sewage tanks, non-tidal sea walls, basements, subways, parapets,
bridges and superstructures. Available in grey. Damp tolerant application.
Type
Size (ml)
MS100
380 cartridges
MS300
600 sachets
MS50
600 sachets
380 cartridges
MS600
600 sachets
Chemicals,
Sealants & Fillers
Nitoseal
132
Expoflex 800
Type
Expoflex 800
Size (litre)
Hilastic
Hilastic LM is a one-part, low modulus silicone sealant suitable for sealing around uPVC windows
and movement joints in concrete, brickwork and a variety of other substrates. Hilastic LM cures
on exposure to air and humidity to form a flexible seal that requires no maintenance throughout
its service life.
Hilastic
Type
Hilastic LM
Size (ml)
380
Plastiseal
Plastiseal is a flexible rubber-bitumen gun-applied joint sealant. It is used for sealing joints in
flashings, guttering and sheet laps. Plastiseal is an integral part of the Proofex waterproofing
system. Usage: 10mm x 10mm joint requires 0.1 litre/metre.
Plastiseal
Type
Plastiseal
Size (ml)
380
Size (ml)
380
Nitoseal 12
Nitoseal 12 is a two-part, elastomeric joint sealant designed for use in the water industry. It is
resistant to abrasion and bacterialogical attack making it ideal for dirty water storage
applications. Nitoseal 12 is typically used in sludge digestion tanks, filtration and aeration tanks,
culverts, raw water reservoirs, sea walls.
Chemicals,
Sealants & Fillers
Nitoseal 12
Type
Size (litre)
Nitoseal 12
Plastijoint
Plastijoint is a hand-applied flexible bituminous putty used for sealing joints in dirty water
retaining structures. Plastijoint is particularly suitable for vertical and inclined joints and is typically
used in sewage disposal works, culverts, sea walls, retaining walls, subways and basement
structures. Plastijoint is not suitable for use in potable water retaining structures.
Plastijiont
Type
Plastijoint
Size (litre)
www.sigscp.co.uk
133
Expoband H45
Expoband H45 is a Hypalon membrane system which is bonded over movement joints or cracks
in structures to prevent the passage of water. Expoband H45 is WRAS approved and is typically
used in reservoir roofs and walls. The membrane is stuck down with Supastik E10.
Expoband H45
Type
Expoband H45
Size
Supastik E10
2 litres
Thioflex 600
Multi-component polysulphide sealant available in two grades; Gun Grade, produced in a range
of colours for application in both vertical and horizontal situations. Pouring Grade, only in grey
for joints in floors or other horizontal surfaces.
Joints which are expected to experience cyclic movements should be designed to an optimum
width:depth ratio of 2:1, subject to the overriding recommended minimum sealant depths set
out below:
5mm for metals, glass and other non-porous surfaces;
10mm for all porous surfaces;
20mm for trafficked joints and those subject to hydrostatic pressures.
The use of a primer is always required on porous surfaces.
Thioflex 600
Type
Size
5 litre tin
500ml, 5 litre tins
Thioflex One
Thioflex One is a one part polysulphide joint sealant available in a range of colours which bonds
to most building construction materials and on exposure to atmosphere moisture, cures to form
a flexible rubber seal.
It is ideal for sealing joints in window and door frame surrounds and as a capping for beaded
glazing systems. It can also be used for sealing joints in external walls and cladding.
Thioflex One
Sizes
380ml Cartridges
Litre/Metre Run
5x5
0.025
15.2
10 x 10
0.1
3.8
15 x 10
0.15
2.5
15 x 15
0.225
1.6
20 x 15
0.3
1.2
20 x 20
0.40
0.95
*These are theoretical yields, no allowance has been made for variation in joint
dimensions or wastage.
Colours available: Black, buff, mahogany, grey, stone, cement white, white, brick red.
Accessories
Fosroc Primer 7
One part chemically active clear liquid for brush application to concrete, stone, brickwork. Use
Primer 7 with Thioflex One for porous surfaces.
Fosroc Primer 4
For use with Thioflex One on non-porous surfaces.
Chemicals,
Sealants & Fillers
Coverage*
Joint size (mm)
134
Accessories
Fosroc Primer 20
Concrete joint faces should be primed with Fosroc Primer 20.
Colpor 200PF
Type
Size
Colpor
5 litre tins
Primer 20*
500ml tins
10 x 10
10 x 20
10 x 25
15 x 15
20 x 20
25 x 25
M.P.L.
10
3.5
4.45
2.5
1.6
Vertiseal CE
Vertiseal CE is a two-part, cold applied, gun grade polysulphide sealant for sealing vertical
movement joints in buildings, and civil engineering structures.
Vertiseal CE
Type
Vertiseal CE
Size (litre)
Paraseal
Paraseal is a two-part, cold applied, pouring grade polysulphide sealant for critical horizontal
joints in buildings, bridges, concrete storage tanks and similar structures and is resistant to
environmental pollution, weathering and immersion.
Paraseal
Type
Paraseal
Size (litre)
Servijoint One
Servijoint One is a cold-applied, one-part polyurethane sealant developed for critical joints in
reservoirs containing potable water and is UK Water Bylaws Scheme listed. Servijoint One
provides a durable, damage resistant surface sealant to protect steel reinforcement in concrete
structures from corrosion. Servijoint One is also suitable for factory floors, culverts, spillways and
car park decks.
Servijoint One
Type
Servijoint One
Size (ml)
310
Chemicals,
Sealants & Fillers
Servijoint Two
Servijoint Two is a chemically curing, pitch free polyurethane sealant specially formulated to
provide a durable seal in movement or construction joints in concrete subject to contamination
by oil and fuel spillage. It can be used in concrete roads, hard standings, runways, petrol filling
stations and industrial production areas.
Servijoint Two
Type
Servijoint Two
Size (litre)
5.0
Gripfill
High Performance, Multi-Purpose, Gap Filling Adhesive.
Gripfill is a solvent-borne, filled rubber resin adhesive, developed to bond virtually any rigid
materials together, regardless of the evenness of the surface.
Available in 310ml cartridges.
www.sigscp.co.uk
135
Sikaflex
Sikaflex-1A+
A single component gun grade polyurethane based sealant for both building and civil
engineering structures. It cures under the influence of atmospheric moisture to form a tough
elastic seal with excellent adhesive properties and resistance to ageing and weathering.
Sikaflex 11FC+
Sikaflex-11FC+ is a one-part, gun grade dual purpose adhesive and sealing compound of
permanent elasticity. Excellent adhesion to most building materials with a fast cure rate, high
durability suitable for potable water contact.
Sikaflex-Windowseal
Sikaflex-Windowseal is a specially developed one-part, low modulus, gun grade polyurethane
based elastomeric joint sealant. It cures rapidly under the influence of atmospheric moisture to
form a highly elastic material with excellent adhesion, resistance to weathering and capable of
being overpainted.
Sikaflex Construction
A one-part general purpose polyurethane permanently elastic joint sealant for use in most
construction joints.
Sikaflex
Type
Size
Sikaflex-1A+
Coverage
600cc Sausage
310cc Cartridge
600cc Sausage
600cc Sausage
Sikaflex 11FC
310cc Cartridge
600cc Sausage
Windowseal
Construction
600cc Sausage
1A+; Grey, PRO 2HP; Grey, White, Black. PRO 3WF; Grey. 11FC Cartridges; Black, Brown, Grey, White
11FC 600cc Sausages; Black, Grey, White. Windowseal; White, (Brown 600cc only). Construction; Grey,
Black, White.
The hypalon strip is activated by the use of Sika Thinners C being wiped on both sides.
Thinners C is also used to remove any uncured resin from tools etc.
Sikadur 31DWI/Rapid
Two pack epoxy thixotropic adhesive for bonding building materials. Fast setting and non
shrinking. For bedding tiles, wood etc. DWI certified for contact with potable water.
Thickness (mm)
SikaDur 31DWI/rapid
SikaDur Combiflex
Sika Thinners C
1 thick
2 thick
Size
Coverage/Length
1.2kg, 5kg
0.5kg*
100, 200mm
100, 200mm
25m
20m
3 Litre
Only DWI approved when SikaDur-Combiflex and SikaDur 31DWI are used together as specified.
*SikaDur 31DWI/rapid per linear metre of Combiflex (using 100mm wide Combiflex).
Chemicals,
Sealants & Fillers
The SikaDur-Combiflex Jointing System consists of a Sika Hypalon Strip and SikaDur 31DWI/Rapid
epoxy resin adhesive. Combiflex Hypalon Sheet is a highly elastic, rot-proof and chemically
resistant sealing sheet with a thickness of 1mm or 2mm. Sikadur 31DWI/Rapid adhesive is epoxy
resin based and establishes a strong bond to the substrate. The system resists water pressure and
can be used on wide joints without the need to remove any existing failed sealant, is suitable for
potable water and has high joint movement capacity.
136
Sika Primer 3N
Coverage
Sika Foams
SikaBoom S
A general purpose expanding polyurethane foam in a can used for fixing and filling gaps in many
applications.
SikaBoom N+
A B2 rated fire resistant expanding polyurethane foam in a can.
Sika Foams
Type
Size (ml)
Coverage
SikaBoom S
750
SikaBoom N+
750
Thoroflex 200
Thoroflex 200 is a Hypalon based, pre-formed membrane system for waterproofing over joints or
cracks where a high degree of movement is expected in both vertical and horizontal applications.
The material is suitable for use on a number of different substrates including concrete, brick,
block and metals.
Thoroflex 200
Type
Size
Thoroflex 200
Thickness (mm)
5kg, 2 component
N/A
Slip Membrane
Heavy Duty Slip Membrane comprises of a tough, dense sheet of specially formulated
polyethylene having a very low friction surface.
Uses: Heavy Duty Slip Membrane is designed for use in sliding joints in reinforced concrete
structures where load bearing characteristics are present, and low friction resistance is required.
The strip is used in two layers to form a load bearing, low friction sliding joint.
Slip Membrane
Size (mm)
150
25
300
25
High quality adhesive for bonding filler boards, polystyrene, insulation and protection boards to a
wide range of surfaces. 5 litre cans.
Chemicals,
Sealants & Fillers
Polystyrene Sheets
Polystyrene Sheets
Size (m)
2.44 x 1.22
Thickness (mm)
Polystyrene Adhesive
High quality adhesive for bonding filler boards, polystyrene, insulation and protection boards to a
wide range of surfaces.
Polystyrene Adhesive
Size (ml)
310 tube
www.sigscp.co.uk
137
Denso Tape
Denso Tape
Ideal for protection against the corrosion of pipe work, metal surfaces and cable below ground
or under water. Also for the temporary sealing of fractured mains and cable joints.
Denso Paste
A primer for Denso Tape and a rust preventative for exposed metal.
Denso Mastic
A mastic for all sealing, filling and caulking purposes.
Denso
Size
Type
Denso Tape
Denso Paste
2.5kg tubs
Denso Mastic
3kg
Expansion joints
Perimeter seals for windows and doors
Gutter seals
Abutment seals for conservatories
Perimeter seals for curtain walling
Sealing roof lights
Ductwork
(300kPa)
(600kPa)
15
15
10
12.5
13
10
17
26
4.5
5.6
35
4.5
4.3
44
3.3
53
* Please note this product is supplied from factory where all thicknesses
available ex-stock except Vitaseal 600 17-53mm.
Chemicals,
Sealants & Fillers
Vitaseal
138
Intufoam Code
Ordering
To order, select the Intufoam thickness by
quoting the code number, then state the
depth of seal required.
QI25
10
18
QI50
25
60
QI75
40
85
QI100
50
120
Example
To obtain 2 hour fire resistance for a 30mm wide gap, Ql50 will be required with a 45mm
depth of seal.
This should be stated thus: Ql50/45.
Fire Resistance
The fire performance rating of Intufoam is determined by the depth of seal. The table below sets
out the depth of seal required to obtain specific periods of fire protection.
Technical data available on request.
This table shows the necessary depth (mm) of Intufoam to achieve a required period of integrity
at the given gap sizes.
Intufoam
Code
Ql25/
30
30
30
90
120
Ql50/
30
30
45
120
150
Ql75/
45
60
90
150
150
Ql100/
60
90
90
150
Chemicals,
Sealants & Fillers
40
Yield
www.sigscp.co.uk
139
Aerosol Foam FR
A one component PU foam aerosol gap filler. Expands and cures on application bonding.
Excellent sealing and insulating properties combined with outstanding fire resistance.
Silicone Sealant FR
A one component low modulus neutral cure silicone sealant. Can be used externally and
internally. Excellent resistance to fire. Colour: White.
Size (ml)
Aerosol Foam FR
750
Silicone Sealant FR
310
Applicator Gun
N/A
Width (mm)
10
12
15
20
30
25
18
13
10
3.50
2.50
20
15
10
17
13
3.25
2.25
1.50
1.25
13
10
2.50
1.75
10
10
1.50
15
6.5
3.25
2.5
1.50
1.25
0.50
Promaseal
Promaseal Intumescent Sealant is a white or grey water based acrylic intumescent sealant.
Promaseal Silicone Sealant is a silicone-based fire protection sealant, available in white, grey or
black. Adhesion is excellent to most types of surface. The sealants cure in air to form a
nonhardening, tack-free seal, preventing the passage of smoke, toxic gases and fire.
Promaseal
Type
Size (ml)
310
310
Accessories
Promaseal Fire Barrier, Compound, Pillows, Foam, Expansion Joint Strip, Unicollar and Pipe Wrap.
Flamex Two is a polysulphide intumescent sealant suitable for expansion joints in building
superstructures and may be used in both internal and external joints.
Flamex S
Flamex S is a fire rated silicone sealant which cures quickly and gives excellent adhesion to most
building materials. It is suitable for the fire protection of curtain walling, building facades,
expansion joints and penetration seals, where pipes and cables pass through fire rated structures.
Flamex S is heavily used in the protection of stadia terracing.
Flamex One
Flamex Two
Flamex S
Size
380ml cartridges
2.5 litre tins
380ml plastic cartridges
Chemicals,
Sealants & Fillers
Flamex Two
140
Size (ml)
FRF
700
dB Acoustic Sealant
Intended for sealing low movement joints providing effective noise reduction. It is used in walls,
partitions and other structures, and for maintaining acoustic integrity when sealing around pipe
and cable penetrations. It is also ideally suited for perimeter pointing around fire door frames
and windows. It is a one-part fire resistant gun and trowel grade acoustic sealant based on an
acrylic emulsion which gives a firm but flexible seal to joints in a variety structures.
db Acoustic Sealant
Code
Size (ml)
DAS3
310
DAS8
310
Sika Firesil-N
A one-part neutral curing, flame retardant silicone sealant suitable for indoor and outdoor
applications.
Type
Sika Firestop
310cc cartridges
Sika Firesil-N
300ml cartridges
Chemicals,
Sealants & Fillers
Advantages:
Extended mould and formwork usage, by deep sealing of wood fibres and providing a highly
abrasive, chemically resistant coating.
Promotes good quality concrete finishes ensuring uniformity of colour and density of concrete
surfaces, with minimal plywood grain pattern transfer.
Nulease Matt
For higher quality concrete finish.
Nulease WB
Environmentally Friendly water-based version.
Nulease Standard
Size (litres)
5, 25
Nulease Matt
Nulease WB
www.sigscp.co.uk
141
Chemlease
A Chemical Release Agent providing a stain free concrete finish of high quality due to its blend
of fatty acids. Has excellent release properties. Dries rapidly and should be used where forms are
struck in not less than 12 hours.
Chemlease OF
An odour free version of the popular chemical release agent is available to order on request
which is suitable for use in confined areas or in areas with poor ventilation.
Usage rate: Approximately 20-50m2 per litre. Available in 25 and 210 litre sizes. 1000 litre IBC
available to order on request. Both Chemlease products are WRAS/WRc approved.
Aquatard FW
For treatment to mould face prior to placing of concrete.
Coverage: 3-4m2 per litre. Available in 25 litre size.
Aquatard TF
For treatment to topface of freshly cast concrete.
Coverage: 3-5m2 per litre. Available in 25 and 210 litre sizes.
Chemshield
A formulation based on high quality petroleum waxes for application to metal formwork,
moulds, concrete plant and equipment. Chemshield, having removed any surface water by
displacement, then deposits a highly anti-corrosive film giving long term protection for up to two
years in the storage and shipping of metal components.
Adofill
Two-part formwork filler paste.
Adofill
Type
Grey
Size (kg)
2, 8
Chemicals,
Sealants & Fillers
Advantages:
High anti-corrosive rating. Metal is protected for up to two years in normal conditions.
Chemshield may be used as a release agent, therefore it need not be removed prior to initial
casting unless it is of prime importance.
A flexible and highly adhesive film, not easily removed in transit.
Excellent de-watering properties, eliminates moisture retention problems.
A quick drying one coat system easily applied by dipping or spraying.
Facilitates easy removal of concrete or mortar contamination.
142
Adostrike
A high quality concrete mould release oil.
Adostrike
Type
Adostrike
Sizes (litres)
Usage (m2/litre)
25, 205
20 - 30
Safetard
Type
Safetard
Available in 5, 25 and 210 litre sizes.
Adotard MF
Size (litres)
5, 25, 210
5, 25
Adofoam
Adofoam
Size (mm)
12 x 6
12
12 x 25
12
Adoseal
Adoseal
Size (litres)
1, 5, 25
Adolease
Adolease
Size (litres)
5, 25, 210
Sika Rugasol
Rugasol C and Rugasol MH+
Chemicals,
Sealants & Fillers
Rugasol C is a Surface Retarder liquid for horizontal use, Rugasol MH+ is gel for vertical use.
Rugasol
Type
Sizes (litres)
Usage (m2/litre)
Rugasol C
25
5 - 10
Rugasol MH+
25
5 - 10
www.sigscp.co.uk
143
Biodegradable Products
High quality mould release oils for the building and construction, civil engineering and concrete
manufacturing industries.
Features and Benefits:
Comprehensive range of high quality demoulding agents.
Specifically developed for the Precast concrete industry and designed for specific applications.
Clean, strong and high quality concrete surface after release.
Easy to apply and excellent release properties.
Biodegradable.
Low volatility and odour.
Cost effective.
Da Vinci AMX
Da Vinci AMX is a concrete mould release oil based on highly refined oils for steel, wooden and
all types of mould whether plastic or resin coated.
Biodegradable according to CEC-L-A-93
Approved as biodegradable lubricating oil under German eco label RAL-UZ64 (Blue Angel).
Coverage and sizes: 20 to 50m sq per litre. Available in 25, 210 and 1000 litre sizes.
Da Vinci AA
Da Vinci AA is an anti-sticking oil based on highly refined oil for asphalt plants, asphalt truck
containers and for cleaning of the tools at the work site.
Biodegradable according to CEC-L-A-93
Approved as biodegradable lubricating oil under German eco label RAL-UZ64 (Blue Angel).
Coverage: 30 to 60m sq per litre. Available in 25, 210 and 1000 litre sizes.
Da Vinci C
Da Vinci C is a concrete mould release oil for steel and wooden moulds and all types of resins or
resin coated. Biodegradable according to CEC-L-A-93
Coverage: 20 to 50m sq per litre. Available in 25, 210 and 1000 litre sizes.
Da Vinci LS
Da Vinci LS is a biodegradable concrete mould release oil that is designed for use in the
manufacture of tiles, fence posts, thin flat sections and other prefab elements of average to
somewhat higher quality. Da Vinci LS is suitable for steel, wooden, synthetic or resin coated
moulds.
Biodegradable according to CEC-L-A-93
Coverage: 30 to 60m sq per litre. Available in 25, 210 and 1000 litre sizes.
Da Vinci N
Da Vinci XA
Da Vinci XA is an anti-sticking oil based on highly refined oil for asphalt plants, asphalt truck
containers and for cleaning of the tools at the work site.
Biodegradable according to OECD 301B
Meets the requirement of German Blue Angel and Nordic White Swan ecolabelling.
Coverage: 20 to 50m sq per litre. Available in 25, 210 and 1000 litre sizes.
Chemicals,
Sealants & Fillers
DA Vinci N is a biodegradable concrete mould release oil that is designed for use in the
manufacture of tiles, fence posts, thin flat sections and other prefab elements of average to
somewhat higher quality. Da Vinci N is suitable for steel, wooden, synthetic or resin coated
moulds and is especially suited for direct release.
144
Admixtures
Adoflow-S Standard Set Plasticiser
The addition of Adoflow-S to an existing concrete mix facilitates up to 25% reduction in added
water content for a given slump with the resultant marked reduction in water/cement ratio
providing increased strengths.
Alternatively it will increase slump by up to 150% without any increase in water content.
Adoflow-S is therefore used to:
Increased strengths without loss of workability, or
Improve workabilility without an increase in water/cement ratio, or
Maintain specified strength with reduced cement content.
The inclusion of Adoflow-S In a well designed concrete mix will also provide:
Easier and speedier placing and compaction.
Minimal segregation and bleeding.
Superior finish.
Reduced shrinkage and minimal cracking.
Increased density and impermeability.
Available in 5, 25 and 210 litre sizes.
Chemicals,
Sealants & Fillers
www.sigscp.co.uk
145
Sika Additives
Wintermix
A winter working admixture for concrete.
Accelerator
Chloride free Sika Accelerator cold weather and rapid hardening admixture for mortars and
concretes.
Sika Additives
Type
Sika Additives
Size (litres)
Usage (m2/litre)
3-6
Chemicals,
Sealants & Fillers
146
Adocure Sealer
A clear acrylic polymer resin solution primarily for application to surfaces of freshly laid concrete
where it has a double function, firstly to form a highly effective curing membrane that conforms
to ASTM. C309, and secondly to act as an in-depth sealer for the hardened concrete rendering
its surface dustproof and extremely hard wearing. Its secondary function and benefits are also
applicable when the material is applied to existing concrete surfaces.
Benefits:
Cures and seals in one operation saving time and labour.
Ideal for use in fast track construction.
Curing efficiency 75% in accordance with ASTM. C390.
Provides abrasive resistant hard wearing easy-clean surface.
Effective anti-carbonation coating.
Permits bond of most subsequent coatings intended for concrete.
Adocure Sealer PF
Chemicals,
Sealants & Fillers
Adocure Sealer
Type
Size (litres)
Coverage (m2/litre)
Adocure Sealer
25, 210
Adocure Sealer PF
25, 210
Adocure WW
A white, aqueous silicate solution, designed to deposit a layer of firmly bonded, high cohesive
strength, minute crystals within the top surface of the concrete to form an integral membrane
which fills all surface pores and capillaries to reduce moisture evaporation.
Coverage: 5.5m2 per litre.
Available in 25 and 210 litre sizes.
Water retention tests on Adocure WW treated cubes and control cubes stored for 24 hours at
30C showed the following results.
www.sigscp.co.uk
147
Adocure WW
Treated (%)
Control (%)
Water retention
80.4
54.2
Water retention
78.3
54.8
Water retention
78.9
54.4
79.2
54.5
The moisture retaining properties of the Adocure WW will reduce over the first few weeks after
application so that the subsequent application of penetrating treatments will be unaffected.
Fosroc Concure WB
Concure WB is a water based concrete curing compound based on a low viscosity wax emulsion.
It is supplied as a white emulsion which forms a clear film on drying.
Concure WB
Type
Sizes (litres)
Usage (m2/litre)
20, 200
3.5 - 5
Concure WB
Adocure WWT
Fugitive dye is added to Adocure WW to aid visual identification of areas of application.
Available in 25 and 210 litre sizes.
Adocure Standard
Resin based curing compound of 75% efficiency. Solution of inert resins in evaporative solvents
for use in general construction projects. WBS listed for drinking water projects.
Available in 25 and 210 litre sizes.
Adocure Super
Resin based curing compound of 90% efficiency. Complies with Clause 1027 of the Department
of Transports specification for Highway Works similar to Adocure Standard but with a higher
curing efficiency. WBS listed for drinking water projects.
Available in 25 and 210 litre sizes.
Adocure Super AL
Aluminised for use in strong sunlight conditions and where DTp stipulate aluminised for
highways, bridges, runways etc.
Available in 25 and 210 litre sizes.
Sika Dustproofer
An economical ready to use dustproofer and hardener for concrete paths and slabs.
Dustproofer
Type
Sika Dustproofer
Size (litres)
Usage (m2/litre)
3-6
Sikafloor CureHard 24
One-component silicate based hardener, dustproofer and curing liquid.
Sikafloor ProSeal
One-component high performance curing, sealing and hardening liquid the original and best.
Sikafloor ProSeal 90
One-component higher efficiency curing, sealing and hardening liquid.
Sikafloor ProSeal W
One-component high efficiency curing, sealing and hardening liquid water based.
Sikafloor ColourSeal
One-component high efficiency coloured curing, sealing and hardening liquid.
Chemicals,
Sealants & Fillers
Sika Hardeners
148
Size (litres)
Coverage (m2/litre)
Sikafloor CureHard 24
25, 200
10
Water
Cleaner
25, 200
10
Thinner C
Sikafloor ProSeal
25, 200
10
Thinner C
Sikafloor ProSeal 90
25, 200
10
Thinner C
Sikafloor ProSeal W
25, 200
10
Water
Sikafloor ColourSeal
5, 25
10
Thinner C
weber.tec ritecure
weber.tec ritecure is a synthetic hydrocarbon resin dissolved in solvent to produce a spray-on
curing membrane to cure new concrete or cementitious mixes. It quickly forms a thin film which
effectively reduces the rate of water evaporation.
weber.tec ritecure
Type
Size (litres)
Coverage (m2/litre)
weber.tec ritecure
25, 200
Size (litres)
Coverage (m2/litre/coat)
5, 25 and 200
16
Concrete Remover
Chemicals,
Sealants & Fillers
www.sigscp.co.uk
149
Adoclean
A specially selected blend of inorganic acids for the removal of cementitious contaminations and
efflorescence from brickwork. Removal of rust staining from concrete.
The cleaner can be further diluted depending upon application. In all cases of staining the cause
should be identified.
Application Instructions;
To remove stains or mortar. Thoroughly saturate the area with water. Apply by brush a 50/50
solution of Adoclean and water, scrub lightly with a hard brush followed by rinse of water. Heavy
mortar deposits may require repeated applications of Adoclean whilst lightly wire brushing and
rinsing with water. Available in 5 and 25 litre cans.
Brick Cleaner
Removes heavy deposits of rust, scale, cement, concrete and mineral deposits from most hard
surfaces. Contains Hydrochloric acid and can be used neat up to 1:20 dilution depending on
application. Available in 5 and 25 litres.
Janitol Plus
A non caustic, high performance degreaser for the effective removal of heavy deposits of oils,
greases and other stubborn soilings. An effective alternative to hazardous solvent and caustic
cleaners. Dilution rate 1:10 to 1:40 depending on application. Available in 5 and 25 litres.
Jizer
Water rinsable degreaser solvent action removes oil, grease, tar, bitumen and waxes used neat.
Available in 5 and 25 litres.
Waterproofing membranes
available from pages 92 - 101
of the Waterproofing section
Formwork Chemical Applicators
Sprayers
Sprayers: 8 litre metal, knapsack or 8 litre plastic. All sprayers sold as complete units.
Sprayer for applying release agents and concrete curing compounds etc.
CodeDescription
Capacity (litre)
7.5
7
Knapsack
14
Chemicals,
Sealants & Fillers
150
Chemicals,
Sealants & Fillers
Lever operated versions of the above. They are light and easy to use and can be used by one
man - a great saving in manpower. Delivers 15 to 20 litres/minute depending on the viscosity of
the material being sprayed and the speed of the operator.
Each unit has a double-diaphragm hand operated pump with filter and air receiver to ensure
uniform spray rate. It is supplied with a 1.2m suction pipe with strainer, a 1.8m suction hose, a
5m delivery hose and a 2m spray lance. Specify whether the unit is to be used for bitumen or
concrete cure, and whether it is for ground or drum-top use.
Contact us for details.
www.sigscp.co.uk
151
Drum Lifters
A range of mechanical handling devices designed to allow one person to handle and transport
heavy items such as 210 litre drums with ease. Contact us with your requirements.
Chemicals,
Sealants & Fillers
152
Chemicals,
Sealants & Fillers