Professional Documents
Culture Documents
Command:
Command:
Command: _xline Specify a point or [Hor/Ver/Ang/Bisect/Offset]: v
Command:
Command: _xline Specify a point or [Hor/Ver/Ang/Bisect/Offset]: h
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter]: d
Specify diameter of circle: 100
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <50.0000>: 40
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]: @20,0
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <40.0000>: d
Specify diameter of circle <80.0000>: 44
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]: @127<51
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <22.0000>: d
Specify diameter of circle <44.0000>: 21
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <10.5000>: d
Specify diameter of circle <21.0000>: 50
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]: @-110,0
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <25.0000>: d
Specify diameter of circle <50.0000>: 30
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <15.0000>: d
Specify diameter of circle <30.0000>: 60
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]: _tan to
Specify next point or [Undo]: _qua of _tan
Point or option keyword required.
Command:
Command:
Command: _line Specify first point:
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]: _tan to
Specify next point or [Undo]: _tan to
Specify next point or [Close/Undo]:
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]: _tan to
Specify next point or [Undo]: _tan to
Specify next point or [Close/Undo]:
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>:
4 constraint(s) removed
Command:
Command: _erase
Select objects:
6 constraint(s) removed
Command:
Command:
Command: _offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <5.0000>: 10
Command:
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r
Specify fillet radius <0.0000>: 5
Command:
FILLET
Current settings: Mode = TRIM, Radius = 5.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Command:
FILLET
Current settings: Mode = TRIM, Radius = 5.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Select second object or shift-select to apply corner:
Command:
FILLET
Current settings: Mode = TRIM, Radius = 5.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Command: <Infer Constraints off>
Command: <3D Osnap on>
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <30.0000>: 25
Command:
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 5.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r
Specify fillet radius <5.0000>: 5
Command:
FILLET
Current settings: Mode = TRIM, Radius = 5.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Command: *Cancel*
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <25.0000>: 15
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <15.0000>: 4
Command:
Command:
Command: _array
Specify center point of array:
Select objects: 1 found
Select objects:
Command:
Command:
Command: _xline Specify a point or [Hor/Ver/Ang/Bisect/Offset]: v
Command:
Command:
Command: _xline Specify a point or [Hor/Ver/Ang/Bisect/Offset]: h
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>:
Command:
Command:
Command: _offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <4.0000>: 40
Command:
Command: _offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <40.0000>: 4
Command:
Command: _offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <4.0000>: 9
Command:
Command: _offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <9.0000>: 10
Command:
Command: _offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <10.0000>: 9
Command:
Command:
Command: _offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <9.0000>: 5
Command:
Command:
Command: _hatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>:
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: *Cancel*
Command: '_dimstyle
Command: '_style
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: *Cancel*
Command: '_style
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: *Cancel*
Command: '_dimstyle
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: *Cancel*
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 110
Automatic save to C:\Users\acer\appdata\local\temp\Drawing1_1_1_1193.sv$ ...
Command:
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 20
Command: *Cancel*
Command: *Cancel*
Command:
Command: _.erase 1 found
Command: _dimjogged
Select arc or circle:
Specify center location override:*Cancel*
Command:
Command: _dimradius
Select arc or circle:
Dimension text = 25
Specify dimension line location or [Mtext/Text/Angle]: *Cancel*
Command:
Command: _dimjogged
Select arc or circle:
Specify center location override:
Dimension text = 25
Specify dimension line location or [Mtext/Text/Angle]: *Cancel*
Command:
Command:
Command: _dimdiameter
Select arc or circle:
Dimension text = 50
Specify dimension line location or [Mtext/Text/Angle]:
Command:
Command:
Command: _dimdiameter
Select arc or circle:
Dimension text = 21
Specify dimension line location or [Mtext/Text/Angle]:
Command:
Command:
Command: _dimdiameter
Select arc or circle:
Dimension text = 30
Specify dimension line location or [Mtext/Text/Angle]:
Command:
Command:
Command: _dimdiameter
Select arc or circle:
Dimension text = 60
Specify dimension line location or [Mtext/Text/Angle]:
Command:
Command:
Command: _dimradius
Select arc or circle:
Dimension text = 5
Specify dimension line location or [Mtext/Text/Angle]:
Command:
Command:
Command: _dimradius
Select arc or circle:
Dimension text = 12
Specify dimension line location or [Mtext/Text/Angle]:
Command:
Command:
Command: _dimradius
Select arc or circle:
Dimension text = 25
Specify dimension line location or [Mtext/Text/Angle]:
Command:
Command:
Command: _dimradius
Select arc or circle:
Dimension text = 22
Specify dimension line location or [Mtext/Text/Angle]: *Cancel*
Command:
Command:
Command: _dimdiameter
Select arc or circle:
Dimension text = 44
Specify dimension line location or [Mtext/Text/Angle]:
Command:
Command:
Command: _dimdiameter
Select arc or circle:
Dimension text = 100
Specify dimension line location or [Mtext/Text/Angle]:
Command:
Command:
Command: _dimlinear
Command:
Command:
Command: _dimdiameter
Select arc or circle:
Dimension text = 8
Specify dimension line location or [Mtext/Text/Angle]:
Command:
Command:
Command: _dimradius
Select arc or circle:
Object selected is not a circle or arc.
Command:
Command: _dimdiameter
Select arc or circle:
Object selected is not a circle or arc.
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <30.0000>: 15
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _dimdiameter
Select arc or circle: *Cancel*
Command:
Command: _dimradius
Select arc or circle:
Dimension text = 15
Specify dimension line location or [Mtext/Text/Angle]: *Cancel*
Command:
Command: _dimdiameter
Select arc or circle:
Dimension text = 8
Specify dimension line location or [Mtext/Text/Angle]: *Cancel*
Command:
Command:
Command: _dimdiameter
Command:
Command:
Command: _dimdiameter
Select arc or circle:
Dimension text = 30
Specify dimension line location or [Mtext/Text/Angle]:
Command: *Cancel*
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 10
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 40
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 10
Command:
Command:
Command: _dimradius
Select arc or circle:
Dimension text = 2
Specify dimension line location or [Mtext/Text/Angle]:
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 32
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Dimension text = 22
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 9
Command:
Command: _.erase 1 found
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 22
Command:
Command:
Command: _qsave
3D
Command:
Command:
Command: _extrude
Current wire frame density: ISOLINES=4, Closed profiles creation mode = Solid
Command: *Cancel*
Command:
Command:
Command: _extrude
Current wire frame density: ISOLINES=4, Closed profiles creation mode = Solid
Command:
Command:
Command: _extrude
Current wire frame density: ISOLINES=4, Closed profiles creation mode = Solid
Command:
Command:
Command: _subtract Select solids, surfaces, and regions to subtract from ..
Select objects:
Select solids, surfaces, and regions to subtract ..
Select objects: 1 found
Select objects:
Command:
Command:
Command: _region
Select objects: Specify opposite corner: 31 found
Select objects:
1 loop extracted.
1 Region created.
Command:
Command:
Command: _extrude
Current wire frame density: ISOLINES=4, Closed profiles creation mode = Solid
Command: *Cancel*
Command:
Command:
Command: _subtract Select solids, surfaces, and regions to subtract from ..
Select objects:
Select solids, surfaces, and regions to subtract ..
Select objects: 1 found
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _subtract Select solids, surfaces, and regions to subtract from ..
Select objects:
Select solids, surfaces, and regions to subtract ..
Select objects: 1 found
Select objects:
Command: *Cancel*
Command:
Command:
Command:
Command:
Command: _extrude
Current wire frame density: ISOLINES=4, Closed profiles creation mode = Solid
1 found
_MO Closed profiles creation mode [SOlid/SUrface] <Solid>: _SO
Command:
Command:
Command: _copy
Select objects: 1 found
Select objects:
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _copy
Select objects: 1 found
Select objects:
Command: *Cancel*
Command:
Command:
Command: _vscurrent
Enter an option
[2dwireframe/Wireframe/Hidden/Realistic/Conceptual/Shaded/shaded with
Edges/shades of Gray/SKetchy/X-ray/Other] <Wireframe>: _R
Command: *Cancel*
Command:
Command:
Command: _vscurrent
Enter an option
[2dwireframe/Wireframe/Hidden/Realistic/Conceptual/Shaded/shaded with
Edges/shades of Gray/SKetchy/X-ray/Other] <Realistic>: _W
Command:
Command:
Command: _erase 1 found
Command:
Command:
Command: _region
Select objects: 1 found
Select objects:
2 loops extracted.
2 Regions created.
Command:
Command:
Command: _vscurrent
Enter an option
[2dwireframe/Wireframe/Hidden/Realistic/Conceptual/Shaded/shaded with
Edges/shades of Gray/SKetchy/X-ray/Other] <Realistic>: _W
Command:
Command:
Command: _vscurrent
Enter an option
[2dwireframe/Wireframe/Hidden/Realistic/Conceptual/Shaded/shaded with
Edges/shades of Gray/SKetchy/X-ray/Other] <Wireframe>: _R
Command:
Command:
Command: _vscurrent
Enter an option
[2dwireframe/Wireframe/Hidden/Realistic/Conceptual/Shaded/shaded with
Edges/shades of Gray/SKetchy/X-ray/Other] <Realistic>: _W
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso
Command:
Command:
Command: _extrude
Current wire frame density: ISOLINES=4, Closed profiles creation mode = Solid
2 found
_MO Closed profiles creation mode [SOlid/SUrface] <Solid>: _SO
Command:
Command:
Command: _copy
Select objects: 1 found
Select objects:
Command:
Command:
Command: _vscurrent
Enter an option
[2dwireframe/Wireframe/Hidden/Realistic/Conceptual/Shaded/shaded with
Edges/shades of Gray/SKetchy/X-ray/Other] <Wireframe>: _R
Command:
Command:
VSCURRENT
Enter an option
[2dwireframe/Wireframe/Hidden/Realistic/Conceptual/Shaded/shaded with
Edges/shades of Gray/SKetchy/X-ray/Other] <Realistic>: *Cancel*
Command:
Command:
Command: _subtract Select solids, surfaces, and regions to subtract from ..
Select objects:
Select solids, surfaces, and regions to subtract ..
Select objects: 1 found
Select objects:
Command:
Command:
Command: _subtract Select solids, surfaces, and regions to subtract from ..
Select objects:
Select solids, surfaces, and regions to subtract ..
Select objects: 1 found
Select objects:
Command:
Command:
Command: _move
Select objects: 1 found
Select objects:
Select objects:
Select solids, surfaces, and regions to subtract ..
Select objects: 1 found
Select objects:
Command:
Command:
Command: _union
Select objects: 1 found
Select objects: