You are on page 1of 14

Industrial & Consumer Specialties

CROP PROTECTION

CLARIANT INTERNATIONAL LTD

Clariant International Ltd.


Industrial & Consumer Specialties
Global Marketing Crop Protection
4132 Muttenz
Switzerland
Phone +41 61 469 7612
Clariant Produkte (Deutschland) GmbH
Industrial & Consumer Specialties
Global Marketing Crop Protection
65926 Frankfurt am Main
Germany
Phone +49 69 305 18410
Internet
http://www.clariant.com
http://www.cropprotection.clariant.com
E-Mail
cropprotection@clariant.com
Copyright 2012 The Clariant Corporation

This information corresponds to the present state


of our knowledge and is intended as a general
description of our products and their possible
applications. Clariant makes no warranties, express
or implied, as to the informations accuracy,
adequacy, sufficiency or freedom from defect
and assumes no liability in connection with any
use of this information. Any user of this product
is responsible for determining the suitability of
Clariants products for its particular application.
Nothing included in this information waives any of
Clariants General Terms and Conditions of Sale,
which control unless it agrees otherwise in writing.
Any existing intellectual/industrial property rights
must be observed. Due to possible changes in our
products and applicable national and international
regulations and laws, the status of our products
could change. Material Safety Data Sheets providing
safety precautions, that should be observed when
handling or storing Clariant products, are available
upon request and are provided in compliance with
applicable law. You should obtain and review the
applicable Material Safety Data Sheet information
before handling any of these products. For
additional information, please contact Clariant.

For sales to customers located within the


United States and Canada the following
applies in addition NO EXPRESS OR
IMPLIED WARRANTY IS MADE OF THE
MERCHANTABILITY, SUITABILITY,
FITNESS FOR A PARTICULAR PURPOSE
OR OTHERWISE OF ANY PRODUCT OR
SERVICE.

Product and service marks


protected by Clariant in many countries

TM Trademark at introductory stage


2010 Clariant International Ltd,
Rothausstrasse 61, 4132 Muttenz, Switzerland

Content

1Adjuvant

1.1Amineethoxylate
1.2EO/POblockcopolymer
1.3Ethersulfate
1.4Fattyalcoholalkoxylate
1.5Fattyalcoholethoxylate
1.6Sorbitanesterethoxylated
1.7Specialadjuvant
1.8Tributylphenolethoxylate

2Dispersingagent
Clarianthaslonglastingexperienceinproducing
adjuvantsandinertsforthecropprotectionindustry.Our
portfolioisoneofthebroadestinthemarketcovering
nonionic,anionicandcationicsurfactants,blends,solvents
aswellaspolymericdispersingagents.

Clariantunderstandsthattheconsistentqualityofour
productsisarequirementforyourformulationtobea
success.Ourdeepunderstandingofchemistryenablesus
toprovideformulationguidance,discussadjuvant
propertiesandregulatoryissuesinvolvedinbringingyour
producttothemarket.Constantinnovationisthekeyto
futuresuccess.Ourabilitytotransformmarket
requirementsintonewproductsandservicesmakesusa
preferredpartnerinthecropprotectionindustry.
Ourgloballyintegratedproductionnetworkensuresan
optimizedsupplychain.

2.1EO/POblockcopolymer
2.2Methyloleyltaurate
2.3Phosphateester
2.4Polycondensationproduct
2.5Sulfonationproduct
2.6Tristyrylphenolethoxylate

3Emulsifier(anionic)

3.1Alkylbenzenesulfonate

4Emulsifier(blend)

4.1Anionic-/non-ionicblend
4.2ClariantMatchedPair

5Emulsifier(nonionic)

5.1Castoroilethoxylate
5.2EO/POalkoxylationproduct
5.3EO/POblockcopolymer
5.4Fattyalcoholethoxylate
5.5Phosphateester
5.6Sorbitanesterethoxylated
5.7Specialemulsifier
5.8Tributylphenolethoxylate
5.9Tristyrylphenolethoxylate

6Solvent

6.1Solvent

7Wettingagent

7.1Amineethoxylate
7.2EO/POblockcopolymer
7.3Ethersulfate
7.4Fattyalcoholalkoxylate
7.5Fattyalcoholethoxylate
7.6Methyloleyltaurate
7.7Olefinsulfonate
7.8Sulfosuccinate

3
3
3
3
3
3
5
5
7

7
7
9
9
9
9
9

11
11

13
13
13

13
13
15
15
15
17
19
19
19
19

21
21

23
23
23
23
23
23
25
25
25

Adjuvant

Active
content
[%]

Appearance

Water content

Cloud Point
[C]

Regulatory Status

1g/ 100 ml/ 10% NaCl

Product composition

5g / 25g/ 25% BDG

Product description

1% active ingredient in water

Water Dispersible Granules (WG)

Cloud point method

Water Soluble Granules (SG)

Soluble Liquid (SL)

Oil Dispersion (OD)

Emulsion oil in Water (EW)

Suspo-Emulsion (SE)

Suspension Concentrate (SC)

Product Name

Emulsifiable Concentrate (EC)

Formulation type

HLB
(calc.)

Reach Status

EPA exempted
from tolerance
under 40 CFR
180.xxx

Amine ethoxylate
Genamin C 020

Genamin C 020 is an amine ethoxylate based on cocos fatty amine. Lower Cocos fatty amine with 2 EO
ethoxylated amine ethoxylates (2 to 5 EO) are highly compatible with the
Glyphosate potassium salt and high-load formutations of Glyphosate.

100%

Liquid

--

--

--

Registration
required

Genamin C 050 is an amine ethoxylate based on cocos fatty amine. Lower Cocos fatty amine with 5 EO
ethoxylated amine ethoxylates (2 to 5 EO) are highly compatible with the
Glyphosate potassium salt and high-load formutations of Glyphosate.

100%

Liquid

--

--

--

Exempted due to 920, 930


polymer status

Genamin C 100 is an amine ethoxylate based on cocos fatty amine.

Cocos fatty amine with 10 EO

100%

Liquid

--

--

--

Exempted due to 920, 930


polymer status

Genamin O 200 is a higher ethoxylated oleyl amine with a lower pour


point versus the corresponding tallow amine ethoxylate.

Oleyl amine ethoxylate

100%

Liquid

--

--

--

Exempted due to 920, 930


polymer status

100%

Liquid

--

--

--

Exempted due to 920


polymer status

Genamin S 100 is a wetting agent and can have other adjuvant functions. Stearyl fatty amine with 10 EO 100%

Liquid

--

--

--

Exempted due to 920


polymer status

Lower ethoxylated amine ethoxylates (2 to 5 EO) are highly compatible


with the Glyphosate potassium salt and high-load formutations of
Glyphosate.

Tallow fatty amine with 5 EO

100%

Liquid

--

--

--

Exempted due to 920, 930


polymer status

Genamin T 100 is a medium EO range tallow amine ethoxylate.

Tallow fatty amine with 10 EO 100%

Liquid

--

--

--

Exempted due to 920, 930


polymer status

Genamint T 150 is the standard adjuvant for Glyphosate IPA


formulations. When using Genamin T 150, the addition of a solubilizer is
necessary to obtain cold-temperature stability and dissolution behaviour
in the spray tank.

Tallow fatty amine with 15 EO 100%

Liquid

--

--

--

Exempted due to 920, 930


polymer status

Genapol ED 1616 is a versatile surfactant which reduces surface tension,


acts as compatibilizer in EC and EW formulations and can reduce
crystallization.

Ethylene diamine EO/PO block 100%


copolymer

Liquid

max. 0,4%

ca. 73,0 (10%


a.m. in water)

16

Exempted due to 960


polymer status

Genapol LRO is a standard wetting agent/adjuvant for tank-mix uses and


SL formulations of water-soluble herbicides like Glufosinate. Furthermore
it is used as wetting agent in SCs.

Alkyl ether sulfate, sodium salt 26%

Liquid

ca. 70%

--

--

Registration
required

910, 930

Genapol LRO is a standard wetting agent/adjuvant for tank-mix uses and


SL formulations of water-soluble herbicides like Glufosinate. Furthermore
it is used as wetting agent in SCs or WGs.

Alkyl ether sulfate, sodium salt 69%

Paste

ca. 30%

--

--

Registration
required

910, 930

Synergen W 06 is an excellent wetting agent to be used in EC or SC


formulations or in tank-mix adjuvants to increase wetting of the plant
surface. It does not require a hazardous labeling.

Fatty alcohol alkoxylate

Liquid

max. 0,5%

ca. 60

13,5

Exempted due to 910, 930, 960


polymer status

10

Exempted due to 910, 930, 960


polymer status

12

Exempted due to 910, 930, 960


polymer status

Genamin C 050

Genamin C 100

Genamin O 200
Genamin S 080
Genamin S 100

Genamin T 050

Genamin S 080 is a wetting agent and can have other adjuvant functions. Stearyl fatty amine with 8 EO

Genamin T 100

Genamin T 150

920, 930

EO/PO block copolymer


Genapol ED 1616

Ether sulfate
Genapol LRO liq.

Genapol LRO paste

Fatty alcohol alkoxylate


Synergen W 06

100%

Besides its use as emulsifier, Genapol C 050 shows excellent adjuvant


properties in EC and SC formulations by enhancing performance in foliar
applications.

Coconut fatty alcohol


polyglycol ether with 5 EO

100%

Besides its use as emulsifier, Genapol C 070 shows excellent adjuvant


properties in EC and SC formulations by enhancing performance in foliar
applications.

Coconut fatty alcohol


polyglycol ether with 7 EO

100%

Fatty alcohol ethoxylate


Genapol C 050

Genapol C 070

Liquid

--

ca. 73

Liquid

--

ca. 50,5

Adjuvant

Coconut fatty alcohol


polyglycol ether with 12 EO

Besides its use as emulsifier, Genapol C 200 shows excellent adjuvant


properties in EC and SC formulations by enhancing performance in foliar
applications.

Coconut fatty alcohol


polyglycol ether with 20 EO

Pasty, waxlike

ca. 77

--

100%

Genapol ID 060 is a wetting agent in SC formulations and can also be


used as built-in-adjuvant or as a component of tank-mix adjuvants to
increase wetting of the plant surface.

Iso-decyl alcohol polyglycol


ether with 6 EO

100%

Liquid

max. 0,2%

ca. 43,0

Liquid

--

ca. 85,0

Genapol ID 100 is a wetting agent in SC formulations and can also be


Iso-decyl alcohol polyglycol
used as built-in-adjuvant or as a component of tank-mix adjuvants that is ether with 10 EO
rapidly wetting the plant surface and can improve penetration.

100%

The Genapol O types are alcohol ethoxylates based on a naturally derived Oleyl alcohol polyglycol ether
fatty alcohol. Besides its use as emulsifier, Genapol O 100 shows
with 10 EO
excellent adjuvant properties in EC and SC formulations.

Pasty-wax like --

ca. 50,0

100%

The Genapol O types are alcohol ethoxylates based on a naturally derived Oleyl alcohol polyglycol ether
fatty alcohol. Genapol O 109 is a 90% aqueous version of Genapol O 100 with 10 EO
for easier handling in SC formulations .

90%

Liquid

ca. 10%

ca. 50,0

Active
content
[%]

Appearance

Pasty-wax like --

Water content

Cloud Point
[C]

Regulatory Status

1g/ 100 ml/ 10% NaCl

Besides its use as emulsifier, Genapol C 120 shows excellent adjuvant


properties in EC and SC formulations by enhancing performance in foliar
applications.

ca. 67

--

Pasty

100%

Product composition

5g / 25g/ 25% BDG

Coconut fatty alcohol


polyglycol ether with 10 EO

Product description

1% active ingredient in water

Emulsion oil in Water (EW)

Water Soluble Granules (SG)

Suspo-Emulsion (SE)

Soluble Liquid (SL)

Suspension Concentrate (SC)

Besides its use as emulsifier, Genapol C 100 shows excellent adjuvant


properties in EC and SC formulations by enhancing performance in foliar
applications.

100%

Oil Dispersion (OD)

Emulsifiable Concentrate (EC)

Product Name

Cloud point method


Water Dispersible Granules (WG)

Formulation type

HLB
(calc.)

Reach Status

EPA exempted
from tolerance
under 40 CFR
180.xxx

Fatty alcohol ethoxylate


Genapol C 100

Genapol C 120

Genapol C 200

Genapol ID 060

Genapol ID 100

Genapol O 100

Genapol O 109

Genapol T 150

Genapol T 150 is a vegetable tallow alcohol based emulsifer and is further C16/C18 fatty alcohol
successfully used as adjuvant in SC formulations.
polyglycol ether with 15 EO

100%

Wax-like

--

ca. 72,0

max. 0,5%

ca. 60,5

Iso-tridecyl alcohol polyglycol


ether with 5 EO

Liquid

The Genapol X products combine low-foam emulsification and wetting


properties which make them the first choice for many NPE-free
formulations as emulsifier, wetting agent and adjuvant.

100%

The Genapol X products combine low-foam emulsification and wetting


properties which make them the first choice for many NPE-free
formulations as emulsifier, wetting agent and adjuvant.

Iso-tridecyl alcohol polyglycol


ether with 6 EO

Liquid

max. 0,5%

ca. 65,5

100%

max. 0,5%

ca. 75,5

Iso-tridecyl alcohol polyglycol


ether with 8 EO

Liquid

The Genapol X products combine low-foam emulsification and wetting


properties which make themthe first choice for many NPE-free
formulations as emulsifier, wetting agent and adjuvant.

100%

The Genapol X products combine low-foam emulsification and wetting


properties which make themthe first choice for many NPE-free
formulations as emulsifier, wetting agent and adjuvant.

Iso-tridecyl alcohol polyglycol


ether with 15 EO

100%

Excellent emulsifier based on renewable resources and with a favorable


Sorbitan monolaurate
toxicological profile used as tank mix adjuvant and in various formulations polyglycol ether with 20 EO

Genapol X 080

Genapol X 150

Exempted due to 910, 930, 960


polymer status

14,5

Exempted due to 910, 930, 960


polymer status

16,5

Exempted due to 910, 930


polymer status

13

Exempted due to 910, 930, 960


polymer status

14

Exempted due to 910, 930, 960


polymer status

12

Exempted due to 910, 930, 960


polymer status

12

Exempted due to 910, 930, 960


polymer status

--

Exempted due to 910, 930, 960


polymer status

10

Exempted due to 910, 930, 960


polymer status

11

Exempted due to 910, 930, 960


polymer status

13

Exempted due to 910, 930, 960


polymer status

15

Exempted due to 910, 930, 960


polymer status

14

Genapol X 050

Genapol X 060

ca. 90,5

Wax-like

max. 0,5%

ca. 70

Sorbitan ester ethoxylated


Emulsogen 4156

97%

Liquid

ca. 2,5%

--

17

Exempted due to 910, 930


polymer status

Special adjuvant
Genamin 267

Genaminox LA
Synergen 9903

Genamin 267 is the standard ready-to-use adjuvant for Glyphosate 360


g/l a.e. IPA formulations with an excellent cost-performance profile. No
addition of solubilizer is neccesary.

Amine ethoxylate containing a 100%


solubilizer

Liquid

--

--

--

Exempted due to 920, 930


polymer status

Genaminox LA is a cost-efficient adjvuant for TAE-free Glyphosate


formulations.

Aqueous solution of an
amphoteric surfactant

30%

Liquid

--

--

--

Registration
required

--

Synergen 9903 is a cost-efficient and environmentally friendly adjuvant


for TAE-free Glyphosate formulations.

Aqueous solution of an
amphoteric adjuvant

32,5%

Liquid

--

--

--

Registration
required

--

Adjuvant
Regulatory Status

1g/ 100 ml/ 10% NaCl

1% active ingredient in water

Water Dispersible Granules (WG)

Water Soluble Granules (SG)

Cloud point method

EPA exempted
from tolerance
under 40 CFR
180.xxx

Appearance

Water content

Cloud Point
[C]

Aqueous solution of
surfactants and glycols

50%

Liquid

--

--

--

Registration
required

--

Synergen G2D is a cost-efficient and environmentally friendly adjuvant for Aqueous solution of an
TAE-free Glyphosate formulations.
amphoteric adjuvant

30%

Liquid

--

--

--

Registration
required

--

70%

Viscous liquid

ca. 30%

--

--

Exempted due to 910


polymer status

Synergen GL 5 is a polyglycerol ester based adjuvant which is derived


Copolymer of glycerol,
from renewable resources and is the first choice for TAE-free Glyphosate esterified
formulations. Due to its unique structure the product does not carry a
hazardous labeling and has proven to be a very versatile adjuvant also for
various other active ingredients.

Synergen GU is a universal and cost-efficient adjuvant for glyphosate


formulations.

Aqueous solution of
surfactants and glycols

35%

Liquid

--

--

--

Registration
required

Sapogenat T products are the best-performing NPE alternatives: Besides


excellent emulsification power, these surfactants are also good wetters,
increasing pesticide efficacy in foliar application.

Tri-sec-butylphenol polyglycol
ether with 8 EO

100%

Liquid

--

ca. 67,0

11

Exempted due to -polymer status

13

Exempted due to -polymer status

14

Exempted due to -polymer status

15

Exempted due to -polymer status

Product composition

Synergen G 480 is cost effective and environmentally friendly adjuvant


for TAE-free, high Load MIPA Glyphosate formulations.

5g / 25g/ 25% BDG

Active
content
[%]

Product description

Soluble Liquid (SL)

Oil Dispersion (OD)

Emulsion oil in Water (EW)

Suspo-Emulsion (SE)

Suspension Concentrate (SC)

Product Name

Emulsifiable Concentrate (EC)

Formulation type

HLB
(calc.)

Reach Status

Special adjuvant
Synergen G 480
Synergen G2D
Synergen GL 5

Synergen GU

--

Tributylphenol ethoxylate
Sapogenat T 080

Sapogenat T 110

Sapogenat T products are the best-performing NPE alternatives: Besides


excellent emulsification power, these surfactants are also good wetters,
increasing pesticide efficacy in foliar application.

Tri-sec-butylphenol polyglycol
ether with 11 EO

100%

Liquid

max. 0,5%

ca. 43,0

--

ca. 63,0

Tri-sec-butylphenol polyglycol
ether with 13 EO

Liquid-pasty

Sapogenat T products are the best-performing NPE alternatives: Besides


excellent emulsification power, these surfactants are also good wetters,
increasing pesticide efficacy in foliar application.

100%

Sapogenat T products are the best-performing NPE alternatives: Besides


excellent emulsification power, these surfactants are also good wetters,
increasing pesticide efficacy in foliar application.

Tri-sec-butylphenol polyglycol
ether with 18 EO

100%

Sapogenat T 130

Sapogenat T 180

Wax-like

--

ca. 62,5

Dispersing agent

Genapol PF 40 is an EO/PO block-copolymer which can be used as a coemulsifier in ECs. Because of its EO/PO ratio and molecular weight the
product is also a highly cost-efficient polymeric dispersing agent in SC
formulations.

Block copolymer of EO/PO


containing 40% EO

Active
content
[%]

Appearance

Water content

Cloud Point
[C]

100%

Liquid

--

ca. 67,8

Regulatory Status

1g/ 100 ml/ 10% NaCl

Product composition

5g / 25g/ 25% BDG

Product description

1% active ingredient in water

Water Dispersible Granules (WG)

Cloud point method

Water Soluble Granules (SG)

Emulsion oil in Water (EW)

Soluble Liquid (SL)

Suspo-Emulsion (SE)

Oil Dispersion (OD)

Suspension Concentrate (SC)

Product Name

Emulsifiable Concentrate (EC)

Formulation type

HLB
(calc.)

Reach Status

EPA exempted
from tolerance
under 40 CFR
180.xxx

EO/PO block copolymer


Genapol PF 40

16

Exempted due to 960


polymer status

Dispersing agent

Regulatory Status

1g/ 100 ml/ 10% NaCl

1% active ingredient in water

Emulsion oil in Water (EW)

Water Dispersible Granules (WG)

Suspo-Emulsion (SE)

Cloud point method

Water Soluble Granules (SG)

Suspension Concentrate (SC)

EPA exempted
from tolerance
under 40 CFR
180.xxx

Water content

Cloud Point
[C]

Genapol PF 80 is an EO/PO block-copolymer with a high molecular weight Block copolymer of EO/PO
and high EO content.
containing 80% EO

100%

Wax-like

--

--

19

Exempted due to 960


polymer status

Hostapon TPHC shows both wetting and dispersing properties which


Fatty acid methyl tauride
makes it a versatile inert ingredient for many liquid and solid formulations sodium salt
with an excellent toxicological and ecotoxicological profile.

60-65%

Powder

max. 1,0%

--

--

Registration
required

Dispersogen LFH is an excellent surfactant based dispersing agent.


Dispersogen LFH exhibits high electrolyte stability and improved
emulsification properties.

2,4,6-Tri-(1-phenylethyl)phenol polyglycol ether


phosphoric ester

97%

Liquid

max. 5,0%

--

--

Exempted due to 920


polymer status

Dispersogen LFS is the neutralized version of Dispersogen LFH.


Dispersogen LFS exhibits high electrolyte stability and improved
emulsification properties.

2,4,6-Tri-(1-phenylethyl)phenol polyglycol ether


monophosphate
triethanolamine salt

96%

Viscous liquid

max. 4,0%

--

--

Exempted due to 920


polymer status

Dispersogen TP 160 is an excellent surfactant based dispersing agent or


can be used as anionic emulsifier.

2,4,6-Tri-(1-phenylethyl)phenol polyglycol ether


phosphoric ester

97,5%

Viscous liquid

max. 2,5%

--

--

Exempted due to 920


polymer status

Emulsogen 3475 is an excellent surfactant based dispersing agent highly


stable in the presence of electrolytes and improved emulsification
properties.

2,4,6-Tri-(1-phenylethyl)phenol polyglycol ether


phosphoric ester,
triethanolamine salt

96%

Viscous Liquid max. 4.5%

--

--

Exempted due to -polymer status

Hostaphat 1306 is a phosphate ester based on iso-tridecanol ethoxylate


and is mainly used in EC and SC formulations as anionic emulsifier and
dispersing agent.

Alcohol ethoxylate,
phosphated

100%

Viscous liquid

--

--

--

Exempted due to 910, 920, 930


polymer status

40%

Liquid

ca. 60%

--

--

Dispersogen ACP 120 is an anionic comb-shaped polymer dispersing


Polyacrylate graft copolymer,
agent which is highly effective at low concentrations and can e.g. be used anionic
to formulate highly stable SC formulations in high electrolyte containing
environments like Glyphosate salts.

Exempted due to 960


polymer status

70%

Liquid

ca. 30%

--

--

Dispersogen PG is a unique polymeric dispersing agent based on


Clariant's polyglycerol ester platform. It combines the functionality of a
wetting as well a dispersing agent and adjuvant properties in one
product.

Exempted due to 910


polymer status

Dispersogen PSL 100 is a non-ionic comb-shaped polyacrylate based


Polyacrylate graft copolymer,
polymeric dispersing agent which is highly effective at low concentrations. non-ionic
It is provided in easy-to-handle liquid form.

100%

Viscous liquid

--

--

--

Exempted due to 960


polymer status

Dispersogen 1494 is an anionic sulfonated dispersing agent with no eyeirritancy for SC and WG formulations.

Sodium salt of a cresolformaldehyde condensation


product

80%

Powder

max. 8,0%

--

--

Exempted due to -polymer status

Sodium salt of a cresolformaldehyde condensation


product

35%

Liquid

--

--

--

Exempted due to -polymer status

62%

Powder

max. 13,0%

--

--

Exempted due to 910, 920


polymer status

Product description

Product composition

5g / 25g/ 25% BDG

Appearance

Soluble Liquid (SL)

Active
content
[%]

Oil Dispersion (OD)

Product Name

Emulsifiable Concentrate (EC)

Formulation type

HLB
(calc.)

Reach Status

EO/PO block copolymer


Genapol PF 80
Methyl oleyl taurate
Hostapon TPHC

910, 930

Phosphate ester
Dispersogen LFH

Dispersogen LFS

Dispersogen TP 160

Emulsogen 3475

Hostaphat 1306

Polycondensation product
Dispersogen ACP 120

Dispersogen PG

Dispersogen PSL 100

Copolymer of glycerol,
esterified

Sulfonation product
Dispersogen 1494

Dispersogen 1494 liq. is an anionic sulfonated dispersing agent with no


eye-irritancy for SC and WG formulations. It is provided as an aqueous
solution for easier handling.

Dispersogen SI is a ready to use and optimized combination of dispersing Combination of anionic


and wetting agents for various SC and WG formulations.
surfactants mixed with carrier

Dispersogen 1494 liq.

Dispersogen SI
Tristyrylphenol ethoxylate

10

Dispersing agent

The Emulsogen TS types are well established replacements for NPEs in


many formulations. Emulsogen TS 200 is also used as dispersing agent.

2,4,6-Tri(1-phenylethyl)phenol polyglycol ether with


20 EO

Active
content
[%]

Appearance

Water content

Cloud Point
[C]

100%

Liquid-pasty

max. 0,5%

ca. 57,5

Regulatory Status

1g/ 100 ml/ 10% NaCl

Product composition

5g / 25g/ 25% BDG

Product description

1% active ingredient in water

Water Dispersible Granules (WG)

Cloud point method

Water Soluble Granules (SG)

Emulsion oil in Water (EW)

Soluble Liquid (SL)

Suspo-Emulsion (SE)

Oil Dispersion (OD)

Suspension Concentrate (SC)

Product Name

Emulsifiable Concentrate (EC)

Formulation type

HLB
(calc.)

Reach Status

EPA exempted
from tolerance
under 40 CFR
180.xxx

Tristyrylphenol ethoxylate
Emulsogen TS 200

13,5

Exempted due to 910, 920


polymer status

Emulsifier (anionic)

Product composition

Appearance

Calsogen 4814 is a multi-purpose anionic emulsifer based on the better


degradable linear CaDDBS in an aromatic-free solvent (2-ethylhexanol)
with a high flash point of > 60C for safer handling.
.

n-C12 alkyl benzene sulfonate 58% (in 2- Viscous liquid


calcium salt
ethylhexan
ol)

1g/ 100 ml/ 10% NaCl

Product description

Regulatory Status

HLB
(calc.)

EPA exempted
from tolerance
under 40 CFR
180.xxx

Water content

Cloud Point
[C]

max. 0,5%

--

--

Registration
required

910, 920, 930

5g / 25g/ 25% BDG

Active
content
[%]

1% active ingredient in water

Water Dispersible Granules (WG)

Cloud point method

Water Soluble Granules (SG)

Soluble Liquid (SL)

Oil Dispersion (OD)

Emulsion oil in Water (EW)

Suspo-Emulsion (SE)

Suspension Concentrate (SC)

Product Name

Emulsifiable Concentrate (EC)

Formulation type

Reach Status

Alkylbenzene sulfonate
Calsogen 4814

Calsogen AR 100

Calsogen AR 100 ND

Calsogen ARL 100 ND

max. 0,5%

--

--

Registration
required

--

Calsogen AR 100 ND is a CaDDBS in a naphthalene depleted high-flash


solvent with a flash point of > 100C for safer handling.
(Solvesso is a registered trademark from Exxon)

40% +
Liquid
10% (in
Solvesso
200 ND)

max. 0,5%

--

--

Registration
required

910

max. 0,5%

--

--

Registration
required

910

iso-C12 alkyl benzene


sulfonate calcium salt

58% (in 2- Viscous liquid


ethylhexan
ol)

--

Registration
required

910, 920, 930

iso-C12 alkyl benzene


sulfonate calcium salt

--

Calsogen EH is a multi-purpose anionic emulsifer in an aromatic-free


solvent (2-ethylhexanol) with a high flash point of > 60C for safer
handling.

max. 0,5%

Phenylsulfonat CA has been "the" standard anionic emulsifier component


in uncountable EC formulations for years.

iso-C12 alkyl benzene


sulfonate calcium salt

70% (in
isobutanol)

max. 0,5%

--

--

Registration
required

920

Viscous liquid

max. 0,5%

--

--

Registration
required

920

Phenylsulfonat CAL is based on a linear CaDDBS and shows improved bio- n-C12 alkyl benzene sulfonate 70% (in
degradation versus the branched Ca salts and has therefore become the calcium salt
isoenvironmentally friendlier alternative.
butanol)

Viscous liquid

Phenylsulfonat CAL

11

40% +
Liquid
10% (in
Solvesso
200)

Calsogen ARL 100 ND combines a safe choice of solvent with a high flash n-C12 alkyl benzene sulfonate 40% +
Liquid
point (> 100C) naphthalene depleted solvent and is based on the more calcium salt
10% (in
environmentally friendly linear CaDDBS.
Solvesso
(Solvesso is a registered trademark from Exxon)
200 ND)

Calsogen EH

Phenylsulfonat CA

Calsogen AR 100 is a CaDDBS in a high-flash solvent with a flash point of iso-C12 alkyl benzene
> 100C for safer handling.
sulfonate calcium salt
(Solvesso is a registered trademark from Exxon)

12

Emulsifier (blend)

Active
content
[%]

Appearance

Water content

Cloud Point
[C]

Regulatory Status

1g/ 100 ml/ 10% NaCl

Product composition

5g / 25g/ 25% BDG

Product description

1% active ingredient in water

Water Dispersible Granules (WG)

Cloud point method

Water Soluble Granules (SG)

Soluble Liquid (SL)

Oil Dispersion (OD)

Emulsion oil in Water (EW)

Suspo-Emulsion (SE)

Suspension Concentrate (SC)

Product Name

Emulsifiable Concentrate (EC)

Formulation type

HLB
(calc.)

Reach Status

EPA exempted
from tolerance
under 40 CFR
180.xxx

Anionic-/non-ionic blend
Emulsogen T

Emulsogen T is an established emulsifier for oils which does not require a Blend on anionic and nonionic 100%
hazardous labeling.
surfactants

Liquid

--

--

--

Registration
required

--

Clariant Matched Pairs comprise different emulsifier blends based on NPE- Blend on anionic and nonionic 100%
free products. By combining them in variable ratios, a broad range of EC surfactants
formulations can be formulated with a small number of raw materials
only.

Liquid

--

--

--

Registration
required

910, 920, 930

Liquid

--

--

--

Registration
required

910, 920, 930

Clariant Matched Pairs comprise different emulsifier blends based on NPE- Blend on anionic and nonionic 100%
free products. By combining them in variable ratios, a broad range of EC surfactants
formulations can be formulated with a small number of raw materials
only.

Clariant Matched Pair


Emulsogen MP 1

Emulsogen MP 2

Emulsifier (nonionic)

1% active ingredient in water

Water Dispersible Granules (WG)

10,5

Exempted due to 960


polymer status

max. 1,0%

--

12,5

Castor oil ethoxylate with 30


EO

Liquid

Emulsogen EL products are standard NPE-free emulsifiers in various EC


formulations. The products show excellent emulsification characteristics
for many solvents and are not eye-irritating.

100%

Exempted due to 960


polymer status

max. 0,5%

--

13,5

Castor oil ethoxylate with 36


EO

Liquid

Emulsogen EL products are standard NPE-free emulsifiers in various EC


formulations. The products show excellent emulsification characteristics
for many solvents and are not eye-irritating.

100%

Exempted due to 960


polymer status

Emulsogen EL products are standard NPE-free emulsifiers in various EC


formulations. The products show excellent emulsification characteristics
for many solvents and are not eye-irritating.

Castor oil ethoxylate with 40


EO

--

14

max. 0,5%

Liquid-pasty

100%

Exempted due to 960


polymer status

max. 0,5%

--

15

Castor oil ethoxylate with 54


EO

Pasty

Emulsogen EL products are standard NPE-free emulsifiers in various EC


formulations. The products show excellent emulsification characteristics
for many solvents and are not eye-irritating.

100%

Exempted due to 960


polymer status

100%

Liquid-pasty

max. 1,0%

--

--

Emulsogen ELO 200 is an emulsifier which is derived from vegetable oils


with very good emulsification properties for natural oils, their methyl
esters and mineral oils. It has an excellent tox-/ecotox profile and
requires no hazardous labeling.

Modified castor oil ethoxylate

Exempted due to 960


polymer status

Product composition

Active
content
[%]

Appearance

Water content

Cloud Point
[C]

1g/ 100 ml/ 10% NaCl

--

Product description

5g / 25g/ 25% BDG

max. 0,5%

Castor oil ethoxylate with 20


EO

Liquid-pasty

Emulsogen EL products are standard NPE-free emulsifiers in various EC


formulations. The products show excellent emulsification characteristics
for many solvents and are not eye-irritating.

100%

Soluble Liquid (SL)

Oil Dispersion (OD)

Regulatory Status

Emulsion oil in Water (EW)

Water Soluble Granules (SG)

Cloud point method

Suspo-Emulsion (SE)

Suspension Concentrate (SC)

Product Name

Emulsifiable Concentrate (EC)

Formulation type

HLB
(calc.)

Reach Status

EPA exempted
from tolerance
under 40 CFR
180.xxx

Castor oil ethoxylate


Emulsogen EL 200

Emulsogen EL 300 LM

Emulsogen EL 360

Emulsogen EL 400

Emulsogen EL 540

Emulsogen ELO 200

13

14

Emulsifier (nonionic)

Emulsogen 3510 is a butanol derived EO/PO copolymer and a standard


emulsifier component in many EC formulations.

n-Butanol alkoxylate

100%

Wax-like

max. 0,5%

ca. 85,0%

Emulsogen EP 4901 is a butanol based EO/PO copolymer in liquid form


n-Butanol alkoxylate
for easier handling. It is mainly used as emulsifier and co-emulsifier in EC
formulations.

--

max. 0,5%

Liquid

100%

Emulsogen V 1816 is an EO/PO block-copoylmer with a low HLB which is


mainly used as emulsifier or co-emulsifier in EC and SC formulations.

EO/PO block copolymer

100%

Pasty

--

ca. 72,9

Genapol ED 1616 is a versatile surfactant which reduces surface tension,


acts as compatibilizer in EC and EW formulations and can reduce
crystallization.

Ethylene diamine EO/PO block 100%


copolymer

max. 0,4%

Liquid

ca. 73,0 (10%


a.m. in water)

Block copolymer of EO/PO


containing 10% EO

Liquid

max. 0,5%

ca. 35,4

Genapol PF 10 is an extremely low-foaming EO/PO block-copolymer


surfactant with a high PO content. The product even exhibits antifoaming properties and can therefore act as defoamer.

100%

Genapol PF 20 is a low-foaming EO/PO block-copolymer surfactant with a Block copolymer of EO/PO


high PO content.
containing 20% EO

100%

Liquid

--

ca. 56,8

Liquid

--

ca. 67,8

Active
content
[%]

Appearance

Water content

Cloud Point
[C]

Regulatory Status

1g/ 100 ml/ 10% NaCl

Product composition

5g / 25g/ 25% BDG

Product description

1% active ingredient in water

Water Dispersible Granules (WG)

Oil Dispersion (OD)

Soluble Liquid (SL)

Emulsion oil in Water (EW)

Water Soluble Granules (SG)

Cloud point method

Suspo-Emulsion (SE)

Suspension Concentrate (SC)

Product Name

Emulsifiable Concentrate (EC)

Formulation type

HLB
(calc.)

Reach Status

EPA exempted
from tolerance
under 40 CFR
180.xxx

EO/PO alkoxylation product


Emulsogen 3510
Emulsogen EP 4901

11

Exempted due to 960


polymer status

16,5

Exempted due to 960


polymer status

Exempted due to 960


polymer status

16

Exempted due to 960


polymer status

13,5

Exempted due to 960


polymer status

14

Exempted due to 960


polymer status

16

Exempted due to 960


polymer status

19

Exempted due to 960


polymer status

15

Exempted due to 960


polymer status

10

Exempted due to 910, 930, 960


polymer status

12

Exempted due to 910, 930, 960


polymer status

14

Exempted due to 910, 930, 960


polymer status

14,5

Exempted due to 910, 930, 960


polymer status

16,5

Exempted due to 910, 930


polymer status

Exempted due to 910, 930, 960


polymer status

12

Exempted due to 910, 930, 960


polymer status

13

Exempted due to 910, 930, 960


polymer status

EO/PO block copolymer


Emulsogen V 1816
Genapol ED 1616

Genapol PF 10

Genapol PF 20

Genapol PF 40

Genapol PF 80

Genapol PF 40 is an EO/PO block-copolymer which can be used as a coemulsifier in ECs. Because of its EO/PO ratio and molecular weight the
product is also a highly cost-efficient polymeric dispersing agent in SC
formulations.

Block copolymer of EO/PO


containing 40% EO

100%

Genapol PF 80 is an EO/PO block-copolymer with a high molecular weight Block copolymer of EO/PO
and high EO content.
containing 80% EO

100%

Genapol PN 30 is a versatile surfactant which acts as compatibilizer and


stabilizes SC formulations.
.

Wax-like

--

--

Ethylene diamine EO/PO block 100%


copolymer

Viscous liquid

--

ca. 28,6

Besides its use as emulsifier, Genapol C 050 shows excellent adjuvant


properties in EC and SC formulations by enhancing performance in foliar
applications.

Coconut fatty alcohol


polyglycol ether with 5 EO

100%

Liquid

Besides its use as emulsifier, Genapol C 070 shows excellent adjuvant


properties in EC and SC formulations by enhancing performance in foliar
applications.

Coconut fatty alcohol


polyglycol ether with 7 EO

100%

Besides its use as emulsifier, Genapol C 100 shows excellent adjuvant


properties in EC and SC formulations by enhancing performance in foliar
applications.

Coconut fatty alcohol


polyglycol ether with 10 EO

100%

Besides its use as emulsifier, Genapol C 120 shows excellent adjuvant


properties in EC and SC formulations by enhancing performance in foliar
applications.

Coconut fatty alcohol


polyglycol ether with 12 EO

100%

Besides its use as emulsifier, Genapol C 200 shows excellent adjuvant


properties in EC and SC formulations by enhancing performance in foliar
applications.

Coconut fatty alcohol


polyglycol ether with 20 EO

100%

The Genapol LA types are readily biodegradable ethoxylates based on a


naturally derived lauryl alcohol.

Genapol PN 30

Fatty alcohol ethoxylate


Genapol C 050

Genapol C 070

Genapol C 100

Genapol C 120

Genapol C 200

Genapol LA 030
Genapol LA 070
Genapol LA 080

15

--

ca. 73

Liquid

--

ca. 50,5

Pasty-wax like --

ca. 90,5

Pasty

--

ca. 67

Pasty, waxlike

--

ca. 77

C12/14 fatty alcohol polyglycol 100%


ether with 3 EO

Liquid

max. 0,3%

ca. 54,0

The Genapol LA types are readily biodegradable ethoxylates based on a


naturally derived lauryl alcohol.

C12/14 fatty alcohol polyglycol 100%


ether with 7 EO

Liquid

max. 0,2%

ca. 57,0

The Genapol LA types are readily biodegradable ethoxylates based on a


naturally derived lauryl alcohol.

C12/14 fatty alcohol polyglycol 100%


ether with 8 EO

Liquid

max. 0,5%

ca. 64,0

16

Emulsifier (nonionic)

The Genapol O types are alcohol ethoxylates based on a naturally derived Oleyl alcohol polyglycol ether
fatty alcohol. Besides its use as emulsifier, Genapol O 100 shows
with 10 EO
excellent adjuvant properties in EC and SC formulations.

100%

Pasty-wax like --

The Genapol O types are alcohol ethoxylates based on a naturally derived Oleyl alcohol polyglycol ether
fatty alcohol. Genapol O 109 is a 90% aqueous version of Genapol O 100 with 10 EO
for easier handling in SC formulations .

90%

Liquid

ca. 10%

ca. 50,0

Water content

Cloud Point
[C]

Regulatory Status

1g/ 100 ml/ 10% NaCl

Appearance

Product composition

5g / 25g/ 25% BDG

Active
content
[%]

Product description

1% active ingredient in water

Water Dispersible Granules (WG)

Oil Dispersion (OD)

Cloud point method

Water Soluble Granules (SG)

Emulsion oil in Water (EW)

Soluble Liquid (SL)

Suspo-Emulsion (SE)

Suspension Concentrate (SC)

Product Name

Emulsifiable Concentrate (EC)

Formulation type

HLB
(calc.)

Reach Status

EPA exempted
from tolerance
under 40 CFR
180.xxx

Fatty alcohol ethoxylate


Genapol O 100

Genapol O 109

Genapol O 150
Genapol O 200
Genapol T 150
Genapol UD 050

The Genapol O types are alcohol ethoxylates based on a naturally derived Oleyl alcohol polyglycol ether
fatty alcohol.
with 15 EO

100%

Wax-like

--

ca. 72,0

The Genapol O types are alcohol ethoxylates based on a naturally derived Oleyl alcohol polyglycol ether
fatty alcohol.
with 20 EO

100%

Wax-like

--

ca. 75,0

Genapol T 150 is a vegetable tallow alcohol based emulsifer and is further C16/C18 fatty alcohol
successfully used as adjuvant in SC formulations.
polyglycol ether with 15 EO

100%

Wax-like

--

ca. 72,0

The Genapol UD products are ethoxylates based on a branched fatty


C11 oxo alcohol polyglycol
alcohol. The products exhibit good wetting and low-foaming characterics. ether with 5 EO

100%

Liquid

--

ca. 68,0

The Genapol UD products are ethoxylates based on a branched fatty


C11 oxo alcohol polyglycol
alcohol. The products exhibit good wetting and low-foaming characterics. ether with 7 EO
Genapol UD 079 is provided as an aqueous solution for easier handling.

Liquid

ca. 10%

ca. 53,5

90%

The Genapol UD products are ethoxylates based on a branched fatty


C11 oxo alcohol polyglycol
alcohol. The products exhibit good wetting and low-foaming characterics. ether with 8 EO

100%

Liquid

--

ca. 63,5

The Genapol X products combine low-foam emulsification and wetting


properties which make them the first choice for many NPE-free
formulations as emulsifier, wetting agent and adjuvant.

Iso-tridecyl alcohol polyglycol


ether with 5 EO

Liquid

max. 0,5%

ca. 60,5

100%

The Genapol X products combine low-foam emulsification and wetting


properties which make them the first choice for many NPE-free
formulations as emulsifier, wetting agent and adjuvant.

Iso-tridecyl alcohol polyglycol


ether with 6 EO

100%

Liquid

max. 0,5%

ca. 65,5

Genapol X 050

Genapol X 060

Genapol X 080

Genapol XM 150

Exempted due to 910, 930, 960


polymer status

12

Exempted due to 910, 930, 960


polymer status

14

Exempted due to 910, 930, 960


polymer status

15,5

Exempted due to 910, 930, 960


polymer status

--

Exempted due to 910, 930, 960


polymer status

11

Exempted due to 910, 930, 960


polymer status

13

Exempted due to 910, 930, 960


polymer status

13

Exempted due to 910, 930, 960


polymer status

10

Exempted due to 910, 930, 960


polymer status

11

Exempted due to 910, 930, 960


polymer status

13

Exempted due to 910, 930, 960


polymer status

15

Exempted due to 910, 930, 960


polymer status

The Genapol X products combine low-foam emulsification and wetting


properties which make themthe first choice for many NPE-free
formulations as emulsifier, wetting agent and adjuvant.

Iso-tridecyl alcohol polyglycol


ether with 8 EO

ca. 75,5

max. 0,5%

Liquid

100%

max. 0,5%

ca. 70

Iso-tridecyl alcohol polyglycol


ether with 15 EO

Wax-like

The Genapol X products combine low-foam emulsification and wetting


properties which make themthe first choice for many NPE-free
formulations as emulsifier, wetting agent and adjuvant.

100%

Genapol XM 060 is a methyl-end-capped ethoxylate based on Genapol X


060 which can enable the formulation of very sensitive active ingredients
in non-aqueous formulations like ECs and ODs.

Iso-tridecyl alcohol ethoxylate 100%


methyl ether with 6 EO

Liquid

max. 0,5%

--

11

Exempted due to -polymer status

Genapol XM 150 is a methyl-end-capped ethoxylate based on Genapol X


060 which can enable the formulation of very sensitive active ingredients
in non-aqueous formulations like ECs and ODs.

Iso-tridecyl alcohol ethoxylate 100%


methyl ether with 15 EO

Wax-like

max. 0,5%

--

15

Exempted due to -polymer status

Dispersogen LFH is an excellent surfactant based dispersing agent.


Dispersogen LFH exhibits high electrolyte stability and improved
emulsification properties.

2,4,6-Tri-(1-phenylethyl)phenol polyglycol ether


phosphoric ester

97%

Liquid

max. 5,0%

--

--

Exempted due to 920


polymer status

Dispersogen LFS is the neutralized version of Dispersogen LFH.


Dispersogen LFS exhibits high electrolyte stability and improved
emulsification properties.

2,4,6-Tri-(1-phenylethyl)phenol polyglycol ether


monophosphate
triethanolamine salt

96%

Viscous liquid

max. 4,0%

--

--

Exempted due to 920


polymer status

Genapol X 150

Genapol XM 060

12

Genapol UD 079

Genapol UD 080

ca. 50,0

Phosphate ester
Dispersogen LFH

Dispersogen LFS

17

18

Emulsifier (nonionic)
Regulatory Status

1g/ 100 ml/ 10% NaCl

1% active ingredient in water

EPA exempted
from tolerance
under 40 CFR
180.xxx

Active
content
[%]

Appearance

96%

Viscous Liquid max. 4.5%

--

--

Exempted due to -polymer status

Excellent emulsifier based on renewable resources and with a favorable


Sorbitan monolaurate
toxicological profile used as tank mix adjuvant and in various formulations polyglycol ether with 20 EO

97%

Liquid

ca. 2,5%

--

17

Exempted due to 910, 930


polymer status

100%

Liquid

max. 1,5%

ca. 66,8

Exempted due to 910, 930, 960


polymer status

11

Exempted due to 910, 930


polymer status

Exempted due to -polymer status

10

Exempted due to -polymer status

11

Exempted due to -polymer status

13

Exempted due to -polymer status

14

Exempted due to -polymer status

15

Exempted due to -polymer status

Product description

Product composition

Emulsogen 3475 is an excellent surfactant based dispersing agent highly


stable in the presence of electrolytes and improved emulsification
properties.

2,4,6-Tri-(1-phenylethyl)phenol polyglycol ether


phosphoric ester,
triethanolamine salt

Water content

Cloud Point
[C]

5g / 25g/ 25% BDG

Water Dispersible Granules (WG)

Cloud point method

Water Soluble Granules (SG)

Soluble Liquid (SL)

Oil Dispersion (OD)

Emulsion oil in Water (EW)

Suspo-Emulsion (SE)

Suspension Concentrate (SC)

Product Name

Emulsifiable Concentrate (EC)

Formulation type

HLB
(calc.)

Reach Status

Phosphate ester
Emulsogen 3475

Sorbitan ester ethoxylated


Emulsogen 4156

Emulsogen M is an excellent emulsifier for mineral oils with a low pour


point. The product is not eye-irritating and does not require any
hazardous labeling.

Emulsogen MTP 070 is an excellent emulsifier for mineral oils with


Oxalkylate based on vegetable 100%
reduced foaming tendency. The product is not eye-irritating and does not fatty alcohol
require any hazardous labeling.

ca. 67,0

max. 3,0%

Liquid

Sapogenat T products are the best-performing NPE alternatives: Besides


excellent emulsification power, these surfactants are also good wetters,
increasing pesticide efficacy in foliar application.

Tri-sec-butylphenol polyglycol
ether with 4 EO

ca. 27,5

--

Liquid

100%

--

ca. 54,7

Tri-sec-butylphenol polyglycol
ether with 6 EO

Liquid

Sapogenat T products are the best-performing NPE alternatives: Besides


excellent emulsification power, these surfactants are also good wetters,
increasing pesticide efficacy in foliar application.

100%

Sapogenat T products are the best-performing NPE alternatives: Besides


excellent emulsification power, these surfactants are also good wetters,
increasing pesticide efficacy in foliar application.

Tri-sec-butylphenol polyglycol
ether with 8 EO

100%

Special emulsifier
Emulsogen M

Emulsogen MTP 070

Oleyl alcohol polyglycol ether

Tributylphenol ethoxylate
Sapogenat T 040

Sapogenat T 060

Sapogenat T 080

Sapogenat T 110

Sapogenat T 130

Liquid

--

ca. 67,0

Sapogenat T products are the best-performing NPE alternatives: Besides


excellent emulsification power, these surfactants are also good wetters,
increasing pesticide efficacy in foliar application.

Tri-sec-butylphenol polyglycol
ether with 11 EO

ca. 43,0

max. 0,5%

Liquid

100%

Sapogenat T products are the best-performing NPE alternatives: Besides


excellent emulsification power, these surfactants are also good wetters,
increasing pesticide efficacy in foliar application.

Tri-sec-butylphenol polyglycol
ether with 13 EO

ca. 63,0

--

Liquid-pasty

100%

--

ca. 62,5

Tri-sec-butylphenol polyglycol
ether with 18 EO

Wax-like

Sapogenat T products are the best-performing NPE alternatives: Besides


excellent emulsification power, these surfactants are also good wetters,
increasing pesticide efficacy in foliar application.

100%

Sapogenat T products are the best-performing NPE alternatives: Besides


excellent emulsification power, these surfactants are also good wetters,
increasing pesticide efficacy in foliar application.

Tri-sec-butylphenol polyglycol
ether with 30 EO

100%

Wax-like

--

--

17

Exempted due to -polymer status

--

--

18

Tri-sec-butylphenol polyglycol
ether with 50 EO

Wax-like

Sapogenat T products are the best-performing NPE alternatives: Besides


excellent emulsification power, these surfactants are also good wetters,
increasing pesticide efficacy in foliar application.

100%

Exempted due to -polymer status

max. 0,3%

ca. 67,0

10

2,4,6-Tri(1-phenylethyl)phenol polyglycol ether with


10 EO

Liquid

The Emulsogen TS types are well established replacements for NPEs in


many formulations.

100%

Exempted due to 910, 920


polymer status

The Emulsogen TS types are well established replacements for NPEs in


many formulations.

2,4,6-Tri(1-phenylethyl)phenol polyglycol ether with


16 EO

13

100%

Exempted due to 910, 920


polymer status

Sapogenat T 180

Sapogenat T 300

Sapogenat T 500

Tristyrylphenol ethoxylate
Emulsogen TS 100

Emulsogen TS 160

19

Liquid

max. 0,3%

ca. 60,0

20

Emulsifier (nonionic)

Water content

Cloud Point
[C]

2,4,6-Tri(1-phenylethyl)phenol polyglycol ether with


20 EO

100%

Liquid-pasty

max. 0,5%

ca. 57,5

The Emulsogen TS types are well established replacements for NPEs in


many formulations.

2,4,6-Tri(1-phenylethyl)phenol polyglycol ether with


29 EO

100%

Wax-like

max. 0,3%

ca. 68,0

The Emulsogen TS types are well established replacements for NPEs in


many formulations. Emulsogen TS 200 is also used as dispersing agent.

Regulatory Status

1g/ 100 ml/ 10% NaCl

Appearance

Product composition

5g / 25g/ 25% BDG

Active
content
[%]

Product description

1% active ingredient in water

Water Dispersible Granules (WG)

Cloud point method

Water Soluble Granules (SG)

Emulsion oil in Water (EW)

Soluble Liquid (SL)

Suspo-Emulsion (SE)

Oil Dispersion (OD)

Suspension Concentrate (SC)

Product Name

Emulsifiable Concentrate (EC)

Formulation type

HLB
(calc.)

Reach Status

EPA exempted
from tolerance
under 40 CFR
180.xxx

Tristyrylphenol ethoxylate
Emulsogen TS 200

Emulsogen TS 290

Emulsogen TS 540

Emulsogen TS 600

13,5

Exempted due to 910, 920


polymer status

15

Exempted due to 910, 920


polymer status

17

Exempted due to 910, 920


polymer status

17,5

Exempted due to 910, 920


polymer status

The Emulsogen TS types are well established replacements for NPEs in


many formulations.

2,4,6-Tri(1-phenylethyl)phenol polyglycol ether with


54 EO

max. 0,3%

ca. 73,0

Wax

100%

The Emulsogen TS types are well established replacements for NPEs in


many formulations.

2,4,6-Tri(1-phenylethyl)phenol polyglycol ether with


60 EO

100%

Wax

max. 0,3%

--

Solvent

Active
content
[%]

Appearance

Water content

Cloud Point
[C]

Regulatory Status

1g/ 100 ml/ 10% NaCl

Product composition

5g / 25g/ 25% BDG

Product description

1% active ingredient in water

Water Dispersible Granules (WG)

Cloud point method

Water Soluble Granules (SG)

Soluble Liquid (SL)

Oil Dispersion (OD)

Emulsion oil in Water (EW)

Suspo-Emulsion (SE)

Suspension Concentrate (SC)

Product Name

Emulsifiable Concentrate (EC)

Formulation type

HLB
(calc.)

Reach Status

EPA exempted
from tolerance
under 40 CFR
180.xxx

Solvent
Dipropylene glycol DME

Liquid

max. 0,1%

--

--

Registration
required

--

Dipropylene glycol DME is a safe and environmentally friendly solvent and Dipropylene glycol dimethyl
an established replacement for NMP in various application areas. The
ether
product does not require a hazardous labeling.

> 99%

Liquid

max. 0,5%

--

--

Registration
required

920

Genagen 4166 is a dimethylamide based on naturally derived fatty acids. Dimethylamide of C8/C10
This extremely versatile non-water miscible solvent is used for various EC, fatty acid
EW and SE formulations.

100%

Liquid

max. 0,5%

--

--

Registration
required

920

Genagen 4296 is a dimethylamide based on naturally derived fatty acids. Dimethylamide of C10 fatty
This extremely versatile non-water miscible solvent is used for various EC, acid
EW formulations.

100%

Genagen 4166

Genagen 4296

21

22

Wetting agent
Regulatory Status

1g/ 100 ml/ 10% NaCl

1% active ingredient in water

EPA exempted
from tolerance
under 40 CFR
180.xxx

Active
content
[%]

Appearance

Water content

Cloud Point
[C]

100%

Liquid

--

--

--

Exempted due to 920


polymer status

Genamin S 100 is a wetting agent and can have other adjuvant functions. Stearyl fatty amine with 10 EO 100%

Liquid

--

--

--

Exempted due to 920


polymer status

Genapol PN 30 is a versatile surfactant which acts as compatibilizer and


stabilizes SC formulations.
.

Ethylene diamine EO/PO block 100%


copolymer

Viscous liquid

--

ca. 28,6

15

Exempted due to 960


polymer status

Genapol LRO is a standard wetting agent/adjuvant for tank-mix uses and


SL formulations of water-soluble herbicides like Glufosinate. Furthermore
it is used as wetting agent in SCs.

Alkyl ether sulfate, sodium salt 26%

Liquid

ca. 70%

--

--

Registration
required

910, 930

Genapol LRO is a standard wetting agent/adjuvant for tank-mix uses and


SL formulations of water-soluble herbicides like Glufosinate. Furthermore
it is used as wetting agent in SCs or WGs.

Alkyl ether sulfate, sodium salt 69%

Paste

ca. 30%

--

--

Registration
required

910, 930

Liquid

--

ca. 36,5

11

Exempted due to 910, 930, 960


polymer status

11

Exempted due to 910, 930, 960


polymer status

12

Exempted due to 910, 930, 960


polymer status

13,5

Exempted due to 910, 930, 960


polymer status

13

Exempted due to 910, 930, 960


polymer status

14

Exempted due to 910, 930, 960


polymer status

11

Exempted due to 910, 930, 960


polymer status

13

Exempted due to 910, 930, 960


polymer status

13

Exempted due to 910, 930, 960


polymer status

Product description

Product composition

5g / 25g/ 25% BDG

Water Dispersible Granules (WG)

Cloud point method

Water Soluble Granules (SG)

Soluble Liquid (SL)

Oil Dispersion (OD)

Emulsion oil in Water (EW)

Suspo-Emulsion (SE)

Suspension Concentrate (SC)

Product Name

Emulsifiable Concentrate (EC)

Formulation type

HLB
(calc.)

Reach Status

Amine ethoxylate
Genamin S 080
Genamin S 100

Genamin S 080 is a wetting agent and can have other adjuvant functions. Stearyl fatty amine with 8 EO

EO/PO block copolymer


Genapol PN 30

Ether sulfate
Genapol LRO liq.

Genapol LRO paste

Fatty alcohol alkoxylate


Genapol EP 0244

Genapol EP 2564
Genapol EP 2584

Genapol EP 0244 combines extremely low-foaming tendency with very


low surface tension making it a powerful wetting agent in demanding
environments. The product does not require a hazardous labeling.

Fatty alcohol alkoxylate

Genapol EP 2564 is an alkoxylate wetting agent which does not require a


hazardous labeling.

Fatty alcohol alkoxylate

100%

Liquid

--

ca. 30,0

Genapol EP 2584 is an alkoxylate wetting agent which does not require a


hazardous labeling.

Fatty alcohol alkoxylate

100%

Liquid

--

ca. 40,5

100%

Liquid

max. 0,5%

ca. 60

Synergen W 06 is an excellent wetting agent to be used in EC or SC


formulations or in tank-mix adjuvants to increase wetting of the plant
surface. It does not require a hazardous labeling.

Fatty alcohol alkoxylate

Genapol ID 060 is a wetting agent in SC formulations and can also be


used as built-in-adjuvant or as a component of tank-mix adjuvants to
increase wetting of the plant surface.

Iso-decyl alcohol polyglycol


ether with 6 EO

100%

Genapol ID 100 is a wetting agent in SC formulations and can also be


Iso-decyl alcohol polyglycol
used as built-in-adjuvant or as a component of tank-mix adjuvants that is ether with 10 EO
rapidly wetting the plant surface and can improve penetration.

ca. 85,0

--

Liquid

100%

The Genapol UD products are ethoxylates based on a branched fatty


C11 oxo alcohol polyglycol
alcohol. The products exhibit good wetting and low-foaming characterics. ether with 5 EO

100%

Liquid

--

ca. 68,0

Liquid

ca. 10%

ca. 53,5

The Genapol UD products are ethoxylates based on a branched fatty


C11 oxo alcohol polyglycol
alcohol. The products exhibit good wetting and low-foaming characterics. ether with 7 EO
Genapol UD 079 is provided as an aqueous solution for easier handling.

90%

The Genapol UD products are ethoxylates based on a branched fatty


C11 oxo alcohol polyglycol
alcohol. The products exhibit good wetting and low-foaming characterics. ether with 8 EO

100%

Liquid

--

ca. 63,5

Genapol XM 060 is a methyl-end-capped ethoxylate based on Genapol X


060 which can enable the formulation of very sensitive active ingredients
in non-aqueous formulations like ECs and ODs.

Iso-tridecyl alcohol ethoxylate 100%


methyl ether with 6 EO

Liquid

max. 0,5%

--

11

Exempted due to -polymer status

Genapol XM 150 is a methyl-end-capped ethoxylate based on Genapol X


060 which can enable the formulation of very sensitive active ingredients
in non-aqueous formulations like ECs and ODs.

Iso-tridecyl alcohol ethoxylate 100%


methyl ether with 15 EO

Wax-like

max. 0,5%

--

15

Exempted due to -polymer status

Synergen W 06

100%

Fatty alcohol ethoxylate


Genapol ID 060

Genapol ID 100

Genapol UD 050

Genapol UD 079

Genapol UD 080
Genapol XM 060

Genapol XM 150

23

Liquid

max. 0,2%

ca. 43,0

24

Wetting agent
Regulatory Status

Liquid

ca. 60%

--

--

Registration
required

910

Hostapur OSB is a solid alpha olefin sulfonate and especially suitable as


anionic wetting agent for solid formulations.

Alpha olefin sulfonate, sodium 90%


salt

Solid

max. 2,0%

--

--

Registration
required

920

Emulsogen SF 8 is an aqueous solution of a dioctyl sulfosuccinate and is


mainly used as anionic wetting agent.

Aqueous solution of sodium


dioctyl sulfosuccinate

50%

Liquid

ca. 50%

--

--

Registration
required

910, 930

64%

Liquid

max. 0,3%

--

--

Registration
required

910

1g/ 100 ml/ 10% NaCl

Hostapur OS liq. is an aqueous solution of an alpha olefin sulfonate and is Alpha olefin sulfonate, sodium 40%
used as anionic wetting agent in liquid formulations.
salt

EPA exempted
from tolerance
under 40 CFR
180.xxx

Active
content
[%]

Appearance

Water content

Cloud Point
[C]

60-65%

Powder

max. 1,0%

--

--

Registration
required

910, 930

5g / 25g/ 25% BDG

Product composition

1% active ingredient in water

Water Soluble Granules (SG)

Soluble Liquid (SL)

Hostapon TPHC shows both wetting and dispersing properties which


Fatty acid methyl tauride
makes it a versatile inert ingredient for many liquid and solid formulations sodium salt
with an excellent toxicological and ecotoxicological profile.

Oil Dispersion (OD)

Emulsion oil in Water (EW)

Suspo-Emulsion (SE)

Water Dispersible Granules (WG)

Cloud point method

Product description

Suspension Concentrate (SC)

Product Name

Emulsifiable Concentrate (EC)

Formulation type

HLB
(calc.)

Reach Status

Methyl oleyl taurate


Hostapon TPHC

Olefin sulfonate
Hostapur OS liq.
Hostapur OSB
Sulfosuccinate
Emulsogen SF 8

Synergen W 03

25

Synergen W 03 is a diocty sulfosuccinate in a non-water miscible solvent. Sodium salt of a diester of


The product is used as anionic emulsifier of wetting / dispersing agent in sulphosuccinic acid in
EC, EW, SE and OD formulations.
aromatic solvent

26

You might also like