Professional Documents
Culture Documents
APPLICATIONS
Railways
Off-road vehicles
Process equipment
Injection moulding
machines
Pumps and Valves
Lifting and handling
equipment
Hydropower
Formula one racing cars
Roll coverings
Marine
Earth Moving Equipment
Unit
HB-FRPR
MG-FRPR
Mpa
70
75
(perpendicular to fabric)
Mpa
360
360
(parallel to fabric)
Mpa
91
91
Hardness
Rockwell
95
95
gm/cc
1.25
1.24
Maximum
120
120
Minimum
-40
-40
Perpendicular to the
laminate
9 - 10
9-10
5-6
5-6
Increase in %
wall
thickness
< 0.1%
< 0.1%
m/s
1.0
1.0
0.04-0.09
0.05-0.09
Blue
Grey
Density
Working Temperature Range
Coefficient of linear
expansion 10-5/ (+20C to
+100C)
Material swell in water
oil lubricated
Colour
MACHINING FRPR
FRPR materials are readily machinable by
conventional machine shop techniques. In general,
methods used for machining softer metals like brass
or aluminium applies for FRPR materials as well. It is
preferable to use tungsten carbide turning tools with
Apart from Composite Bearing, Royal specialises in Wear Rings for Hydraulic &
Pneumatic applications made of different raw materials.
The main function of Guide ring is to guide the rod or the piston of a hydraulic cylinder
and absorb the forces that act perpendicular to the direction of movement. Guide rings
also help in preventing any metallic contact between any sliding parts, minimizes the
eccentricity, and thus overall increases the seals life.
Materials
In view of the different specific demands made on piston and rod guides, various Guide
ring materials are available:
FRPR Fabric Reinforced Polyester Resin composite material is used in heavy duty
applications where high radial forces are generated.(q=120 Mpa)
PAGF Glass filled Polyamide material is used in medium to heavy duty applications.
Friction-reducing fillers can be added for special applications. (q=40 Mpa)
Filled PTFE (PB40/PB60)- Filled PTFE material guide rings are used in low to medium
duty applications where limited radial forces are generated. Low co-efficient of friction
allows the wear ring to be used in Pneumatic applications as well where high speeds are
required.(q=20 Mpa)
The total radial load on the piston, the surface speed, type of hydraulic fluid used,
temperature of the system etc. is to be kept in mind while selecting the appropriate
Guide ring. Please do not hesitate to contact our Technical Department for further
information on specific applications and special technical questions.
Thank You.
Royal Composites Pvt. Ltd. ( Unit l )
Howrah Polypark, Near Sankrail Toll Plaza, Unit - PPH4, Vill & Post Kandua.
P.S. - Sankrail, Howrah Dist. 711302, West Bengal, India
Phone: +919674737342/36