You are on page 1of 7

10165: TOILET ACCESSORIES

0
Al LABINA / AL MANAR
in partnership with Hamza/ ECH/ LCE JV

AL FATEH UNIVERSITY
Division 10 finishes

ODAC
section 101165 Toilet accessories

TABLE OF CONTENTS
SECTION

PAGE

SECTION 10165 Toilet accessories


1.
General ...................................................................................................... 1
1.1
Scope ............................................................................................. 1
1.2
Related Documents ........................................................................ 1
1.3
Quality Assurance .......................................................................... 1
1.4
Submittals ....................................................................................... 2
1.5
Reference Standards ..................................................................... 2
1.6
Delivery, Storage and Handling ..................................................... 2
1.7
Extra Materials ............................................................................... 2
2.
Products .................................................................................................... 3
2.1
Toilet Accessories .......................................................................... 3
2.2
Materials ......................................................................................... 3
2.3
Recommended Manufacturers ....................................................... 4
3.
Execution ................................................................................................... 4
3.1
Inspection ....................................................................................... 4
3.2
Installation ..................................................................................... 5
3.3
Field Quality Control ....................................................................... 5

AL FATEH UNIVERSITY
Division 10 finishes

ODAC
section 101165 Toilet accessories

SECTION 10165: TOILET ACCESSORIES


1.

GENERAL
1.1

Scope
Work includes providing all materials, equipment, accessories, services
and tests necessary to complete and make ready and operation by the
Employer, all Toilet Accessories in accordance with architectural and
plumping drawings and specifications.

Extent of Toilet Accessories work required by this contract is indicated


on architectural drawings and by requirements of this section. Types of
Toilet Accessories specified in this section include but not limited to the
following:
Soap Dispenser.
Paper towel dispenser.
Handicapped grab rails.
Toilet paper holder.
Electrical hand dryer.
Mirrors.
Other accessories.

1.2

Related Documents
Drawings and general provisions of the project contract, including
general and supplementary contract general conditions, apply to the
project work of this section.
Provisions for plumping work, applies to work of this section.
The requirements of this section apply to equipment specified elsewhere
in the specifications.
Plumping specifications and drawings.

1.3

Quality Assurance
Firms regularly engaged in manufacture of plumping fixtures and trim of
types and capacities required whose products have been in satisfactory
use in similar service for not less than 3 years. Provide plumping fixtures
and trim produced by a manufacturer listed as an acceptable
manufacturer in this section. Provide all fixtures of the same
manufacturer unless otherwise noted.
Standards Compliance: Federal specification comply with requirements
of WWP-54/d and American Standards.

1.4

Submittals

AL FATEH UNIVERSITY
Division 10 finishes

ODAC
section 101165 Toilet accessories

Submit the following in accordance with conditions of the contract and


specifications:
Product Data: Submit manufacturers technical product data, including
the selected model clearly indicated, furnished specialities and
accessories and installation instruction.
Shop Drawings: Submit manufacturers assembly type shop drawings
indicating dimension, roughing in requirements, required clearances and
methods of assembly of components and anchorage's.
Samples: Submit samples of each Toilet Accessories furnished in the
toilets.
Maintenance Data: Submit maintenance data and part lists for each type
of Toilet Accessories.
1.5

Reference Standards
All Toilet Accessories work shall be performed in strict accordance with
the project specifications, architectural, plumping, drawings and the
stipulations of the national standard plumping code (NPC), the
corresponding Egyptian standard specifications, latest, Edition or other
equivalent international standards.

1.6

Delivery, Storage and Handling


Deliver Toilet Accessories individually wrapped in factory fabricated
containers and handle them carefully to prevent breakage, chipping and
scoring their finish. Do not install damaged Toilet Accessories, replace
and remove from the project site damaged units.

1.7

Extra Materials
Deliver extra materials to Employer, Furnish extra materials matching
with product installed, packaged with protective covering for storage and
identified with labels clearly describing contents.

AL FATEH UNIVERSITY
Division 10 finishes

2.

ODAC
section 101165 Toilet accessories

PRODUCTS

2.1 Toilet Accessories


Provide factory fabricated Toilet Accessories of types, styles, sizes, and
materials indicated. All Toilet Accessories of same type must be
furnished by single manufacturer. Where of same type must be
furnished by type is not otherwise indicated, provide the accessories
complying with installation requirements and governing regulations.
2.2 Materials
Unless otherwise specified, comply with applicable standard
specification of country of origin pertaining to Toilet Accessories, fittings,
trim, metal, finishes and quality of finishing.
Where fittings, trim and accessories are exposed or semiexposed,
provide bright chrome plated or polished stainless steel units provide
copper or bronze where not exposed for the following Toilet
Accessories:
2.2.1 Soap Dispenser (9.5cm x 28.5cm x 11cm):
Soap Dispenser wall mounted with counter soap reservoir with chrome
plated brass finish.
2.2.2 Paper Tower Dispenser (39cm x 25cm x 12cm):
Paper Tower Dispenser and waste receptacle, all with stainless steel
finish.
2.2.3 Handicap Grab Rails (36cm x 13cm x 12cm)
2.5cm and (64cm x 10cm) 2.5cm:

2.5cm, (31cm x 1cm)

All with stainless steel mail with snap flanges.


2.2.4 Toilet Paper Holder (17cm x 10cm)

2.5cm:

All with Contura surface mounted multi roll toilet tissue dispenser.
Stainless steel satin finish.
2.2.5 Electric Hand Dryer (30cm x 40cm x 12cm):
All with chrome plated finish.

AL FATEH UNIVERSITY
Division 10 finishes

ODAC
section 101165 Toilet accessories

2.2.6 Mirrors:
Furnish and install mirror location for he following size with concealed
hangers and stainless steel frame:
-

90cm x 100cm, 6mm glass thickness.

90cm x 70cm, 6mm glass thickness


All the above accessories will be suitable for luxry project and selected
from high quality materials and manufacturers. the contractor has to
provide a sample to the engineers for approval before delivery to the
site.
All the materials noggins, bearers,. Etc are required for supporting the
Toilet Accessories should be accurately positioned and security fixed.

2.3

Recommended Manufacturers
-

Bobrick

(USA).

Ceramic Dolomite

(Italy).

MKinner Parker

(USA).

Roca

(Spain).

Bokhtal

(Germany).

Approved Equal.
3.

3.1

EXECUTION

Inspection
Examine roughing in work of plumping fixtures to verity actual locations
of Toilet Accessories. Correct any incorrect locations of Toilet
Accessories and other unisatis - factory conditions for installation of
Toilet Accessories. Do not proceed with work until unsatisfactory
conditions have been corrected.

3.2

Installation
Install Toilet Accessories in accordance with manufacturers written
instructions, applicable codes and regulations, and in accordance with
recognised industry practices to ensure that installation complies with
requirements and serves intended function of the National Standard
plumping code of USA.
Coordinate with other works fasten Toilet Accessories securely to
supports or building structure, and ensure that accessories are levelled.
Secure the Toilet Accessories movement. Protect installed accessories
from damage during the remainder of construction period.

AL FATEH UNIVERSITY
Division 10 finishes

ODAC
section 101165 Toilet accessories

Install chrome plated escutcheons at each wall, floor ceiling penetration


in exposed finished location and within cabinets and mill work.
Clean accessories using
methods and materials.

manufacturers

recommended

cleaning

Provide protective covering for installed Toilet Accessories.


3.3

Field Quality Control


Upon completion of installation of Toilet Accessories.
When possible, correct malfunctioning units at site then re-examinee
demonstrate compliance otherwise, remove accessories and replace
with new unit. Feasibility and march to be judged by the Engineer.
Remove cracked or dented units and replace with new units.
Clean Toilet Accessories of dirt and debris upon completion of
installation.
End of Section 10165

You might also like