Professional Documents
Culture Documents
constructive solutions
Standard compliance
Specification
Preparation
In order for Galvashield FMA to function correctly, steel
reinforcing must be continuous, if not, continuity must be
established throughout the structure prior to making
connections (see detailed method statement). Make any
repairs to the substrate using Renderoc repair products as
necessary prior to commencing the Galvashield
Description
Galvashield FMA is a galvanic protection system based
upon the installation of a zinc mesh anode system
conforming to ASTM A-190. The anode system is
connected to the steel reinforcement to provide the
required protective current to the steel. Contact to the
surface of the concrete is maintained by purpose designed
compression members.
Page 1
Galvashield FMA
Estimating
Supply
Galvashield FMA is supplied in sheet form ready to use,
some cutting may be required on site to suit particular
design features.
Precautions
Health and safety
There are no known health and safety hazards associated
with Galvashield FMA.
Important note:
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions
for the Supply of Goods and Services, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that
any advice, recommendation, specification of information it may give is accurate and correct, it cannot, because it has no direct
or continuous control over where or how its products are applied, accept any liability either directly or indirectly arising from the
use of its products, whether or not in accordance with any advice, specification, recommendation of information given by it.
www.fosroc.com
email: fosam@fosroc.com
Regional Offices
Jeddah Sales Office
Jeddah Showroom
Riyadh
Dammam
Khamis Mushayt
Registered Office: Industrial Area, Phase 4, Road No. 414, Street No. 407
Page 2
FO SA/GSFMA/05/A