You are on page 1of 9

MIN/N 0404 Prepare Drill

Q1.PC1.Rig Mounted Drilling Can Drill


A. Vertical Holes
B. Horizontal Holes
C. Inclined Holes
D. All of the above.
Q2.PC2. Rig Mounted Drilling operates on
A. Pneumatic Pressure
B. Hydraulic Pressure
C. Compressed Air Pressure
D. All of the above.
Q3.PC3.What is wet drilling
A. Spraying Oil while drilling.
B. Spraying water while drilling.
C. Spraying saw dust while drilling
D. None of the above.
Q4.PC4.Types of drilling process (phenomenon) are.
A. Rotary
B. Percussive
C. Rotary Percussive
D. All of the above.
Q5.PC5.Minimum compressed air pressure required for drilling.
A. 6bar (kgf/cm2)
B. 9 bar (kgf/cm2)
C. 10 bar (kgf/cm2)
D. 15 bar (kgf/cm2)
Q6.PC6.Types of drill bits are
A. Conical Bit
B. Chisel Bit.
C .Diamond drill bit
D. All of the above.
Q7.PC7.Is Core Drilling and Rig mounted drilling are same.
A. Yes
B. No

MIN/N 0405 Perform Drill Operations

Q8.KA1.Identify the following.

A. Wagon Drill
B. Jack Hammer
C. Compressor.
D. Drilling rods.
Q9.KA2.Sub grade drilling is
A. Lesser drilling of 0.5-1m lesser than the bench height
B. Extra drilling of 0.5-1m more than the bench height
C. In sub grade drilling a hole will be drilled equal to the height of the
bench.
D. None of the above.
Q10.KA3.Speed or rate of drilling a hole depends on.
A. Hardness of the rock.
B. Length of drill rod.
C. Diameter of drill bit
C. Hydraulic pressure.
Q11.KA4.Usually length of drill rods will be

A.4.5m, 3m, 1.5m


B.1m.0.5m, 0.25m
C. All of the above
D. None of the above.
Q12.KA5.Usually diameter of drill bit will be.
A. 115mm, 145mm, 175mm
B. 133mm, 111mm, 99mm
C. All of the above
D. None of the above.

MIN/N 0406 Drill Maintenance and


troubleshooting
Q13.KB1.Expand DTH drilling
A. Down the hole drilling
B. Drill the hole drilling
C. Diameter the hole drilling
D. Drum the hole drilling
Q14.KB2.Drill bit is made up of.
A. Cast Iron
B. Tungsten carbide
C. Copper
D. Mild Steel
Q15.KB3.Drill bit and rods usually jam in the case
A. Where drilling area is exposed to cracks
B. Where the drilling area is wet and water bearing.
C. Where drilling cuttings falls in the hole itself.
D. All of the above.
Q16.KB4.IDENTIFY THE FOLLOWING

A. Wagon Drill
B. Jack Hammer
C. Jumbo Drill
D. None of the above
Q17.KB5. IDENTIFY THE FOLLOWING

A. Wagon Drill
B. Jack Hammer drilling
C. Jumbo Drill
D. None of the above

MIN/N 0407 Documentation and Reporting

Q18.KC1. IDENTIFY THE FOLLOWING

A. Wagon Drill
B. Jack Hammer drilling
C. Jumbo Drill machine
D. None of the above

Q19.KC2.Which Are the companies produce rig mounted drilling


machines?
A Atlas Copco
B Voltas
C CAT
D Willworth
Q20.KC3.What are the danger prone areas in a mine?
A. Canteen.
B. Mines Office.
C. Weighbridge.
D. Bench, over Hang, under cut.

Q21.KC4.Usually fire occurs in a rig mounted drilling due to.

A. Short Circuit.
B. Diesel leakage.
C. Grease.
D. None of the above.

Q22.PC8. PPE (Personal Protective Equipments) contains.


A. Clothes.
B. Fire Extinguishers.
C Helmet, Shoes.
D. Socks.

MIN/N 0407 Documentation and Reporting


Q23.SA1.What a daily maintenance checklist consists of?
A. Oil changing details.
B. Monthly Maintenance details.
C. Diesel, working hour details.
D. Filter Change details
Q24.SA2.What does a first aid box will include?
A. Hand gloves.
B. Spectacles.
C. Band Aid, Dettol.
D. Keys.

Q25.SA3.What PPE (Personal Protective Equipments) should a


drilling team should wear?

A. Hand gloves.
B. Spectacles.
C. Dust Mask, Ear Plugs
D. All of the above.

Q26.SA4.How much should be the width of the bench?


A. Three times the biggest machinery employed.
B. Two times the biggest machinery employed.
C. Once the biggest machinery employed.
D. Four times the biggest machinery employed.
Q27.SA5. Bench is
A. Vertical excavation made for production.
B .Horizontal excavation made for production.
C. Collection of Stock in one place
D. None of the above.

MIN/N 0901 Health and Safety

Q28.KA1.What does a first aid box will include?


A. Hand gloves.
B. Spectacles.
C. Band Aid, Dettol.
D. Keys.

Q29.KA2.At the time of commencement of blasting where drilling


machine should be parked?
A. Rest Shelter.
B.Blasting Shelter.
C. Away from blasting zone.
D. Near to Blasting Area.
Q30.KA3.Using rig mounted drilling can complete mine exploration
done?
A YES
B NO
Q31.KA3.Identify the following mounting of drilling machine.
A Crawler Mounted
B Tire mounted
C Stand mounted
D All of d above
Q32.KA4.Types of oils used in drilling machine is
A Hydraulic oil
B Coolant Oil
C Engine oil
D All of the above
Q33.KA5.Which are the body parts effects more for prolonged
drilling people?
A Lungs
B Eyes
C Ears
D All of the above

You might also like