You are on page 1of 4

* <ZU>PRCL 03 Cumulating and Storing Time Wage Types -->CYCL.

X020 </>

PRCL 03 Cumulating and Storing Time Wage Types in RT


<DS:HRDS.DSYSLO_ECDCYCL_X020AAAAAAAAAAAAAAAA___1VVV>PC rule
X020* <DS:HRDS.DSYSLO_ECDCYCL_X020AAAAAAAAAAAAAAAA___1VVV>CYCL.X020</>
&object&Processing class
&use&After the wage types (actual time, absence times, overtime, substitution, variable payments and
deductions) have been defined and evaluated, they are cumulated in the collective results. If they are no
longer needed for further calculation, they are stored in the results table.
&syntax&Table T512W
&procedure&All time wage types and also all the wage types that are required for calculation (basic pay
and valuation bases' that result from them) must be coded in processing class 03.*
- -->CYCL.X020*
<DS:HRDS.DSYSLO_ECDPRCV_030AAAAAAAAAAAAAAAAA99_3VVV>CYCL.X020</>

* Specif.-

0 transfer unchanged

-->PRCL.99030 &specifications&Specifications

Specification 0 Transfer Unchanged


030 Transfer Unchanged
&object&Specification of processing class
Procedure&procedure&
Procedure The wage type is passed on as it is needed for further processing.
Examples&examples&

Salary
Monthly Lump Sums

Specification 1 RT-Storage, Cumulation with Payroll Type and AC1-Code


&object&031 RT-Storage, Cumulation with Payroll Type and AC1-Code
&object&Specification of processing class
Procedure&procedure&
The wage type is stored with all codes in the RT and is cumulated in the collective results. The
wage type is no longer needed for further development.
Examples&examples&

Bonuses, normal hours, sickness/leave allowance


Perhaps overtime, if this has not been coded with * specification 5 -->PRCL.99035 for cost
accounting.specification 5 Processing Class 35
<DS:HRDS.DSYSLO_ECDPRCV_035AAAAAAAAAAAAAAAAA99_3VVV>Processing class
035 *
<DS:HRDS.DSYSLO_ECDPRCV_035AAAAAAAAAAAAAAAAA99_3VVV>PRCL.99035</>for
cost accounting.

Specification 2 RT-Storage with Payroll Type and A-Split

032 RT-Storage with Payroll Type and A-Split


&object&Specification of processing class
Procedure&procedure& The wage type does not need to be cumulated in the collective results. It is no
longer needed further on in the procedure. Only the payroll type and the basic pay/work center code
remain from the identifier.
Example&examples& Hourly wage
Specification 3 RT-Storage, Cumulation only for Hourly Wage
033 RT-Storage, Cumulation only for Hourly Wage
&object&Specification of processing class
Procedure&procedure&
The wage type in payroll type 1 (hourly wage) is a time wage type, which means that it should be stored
with the correct codes in the RT table and added in cumulative results. However, for other payroll types,
the wage type is a monthly lump sum and is transferred for further processing.
Example&examples&
Shift allowance
Specification 4 RT-Storage with Payroll Type and A-Split only for Hourly Wage
034 RT-Storage with Payroll Type and A-Split only for Hourly Wage
&object&specification of processing class
Procedure&procedure&
The wage type for payroll type 1 (hourly wage) is a valuation basis which means that is should be stored
with the correct payroll type and basic pay/work center code in the RT. However, for other payroll types,
the wage type is a monthly lump sum and is passed on for further processing.
Example&examples&
Shift allowance
Specification 5 RT-Storage, Cumulation, Collection of Overtime Hours
&object&035 RT-Storage, Cumulation, Collection of Overtime Hours
&object&Specification of processing class
Procedure&procedure&
The wage type is stored with all its codes in the RT and cumulated in the collective results. The wage type
is not needed for further processing. Up to this point, the processing is exactly the same as in
specification 1 *
1
-->PRCL.99031.<DS:HRDS.DSYSLO_ECDPRCV_031AAAAAAAAAAAAAAAAA99_3VVV>Processin
g class 031* <DS:HRDS.DSYSLO_ECDPRCV_031AAAAAAAAAAAAAAAAA99_3VVV>PRCL.99031</>
In addition to this, the number of * wage types are collected together in -->WTYP.99/852.wage types are
collected together in wage type /852
Specification 6 RT-Storage with Payroll Type, Cumulation
036 RT-Storage with Payroll Type, Cumulation

&object&Specification of processing class


Procedure&procedure&
The wage type is only stored with the payroll type in the RT and cumulated in the collective results.
The wage type is no longer needed in further processing. All wage types, which are included in the
deferred accounting must receive this specification, hence the month for which deferred accounting
is being carried out is not the same as the month being paid.
Examples&examples&

Bonuses, normal hours, illness/leave allowance


Perhaps overtime pay, in case these are not allocated* to cost accounting using specification
-->PRCL.99035 to cost accounting using specification 5 Processing Class
035<DS:HRDS.DSYSLO_ECDPRCV_035AAAAAAAAAAAAAAAAA99_3VVV>Processing
class 035*
<DS:HRDS.DSYSLO_ECDPRCV_035AAAAAAAAAAAAAAAAA99_3VVV>PRCL.99035</>

Processing Class 03 Calls the PCR X020

<DS:HRDS.DSYSLO_ECDWTYP_D852AAAAA
AAAAAAAAAAA99_HVVV>Wage type /852*
<DS:HRDS.DSYSLO_ECDWTYP_D852AAAAAAAAAAAAAAAA99_HVVV>WTYP.99/852</>

You might also like