You are on page 1of 8

Technical Description L 574

Wheel Loader

Tipping load 16690 kg Liebherr


Bucket capacity 4,5 – 8,5 m3 Norm Test
Operating weight 24,2 t 2,7 l/100 t
Engine output 195 kW/265 HP 17,4 l/h

The Better Machine.


Engine Tyres
Liebherr diesel engine __________ D 926 TI-E A2 Available sizes ______________________ 26.5R25
6-cylinder, inline engine, water- Tubeless radial or cross-ply tyres on
cooled exhaust-turbo charged with well-base rims
intercooler Special tyres ________________________ By arrangement with the manu-
Power output facturer
according to ISO 9249 ______ 195 kW (265 bhp) at 2000 RPM
Max. torque ____________________ 1170 Nm at 1200 RPM
Displacement __________________ 9,96 litres
Steering
Bore/stroke ____________________ 122/142 mm Design ________________________________ “Load-sensing” variable axial piston
Air cleaner __________________________ Dry type with main and safety pump
element, pre-cleaner, service Central pivot with two double-acting,
indicator on LCD display damped steering cylinders
Operating voltage ________________ 24 V Angle of articulation ____________ 40h (to each side)
Battery __________________________ 2 x 143 Ah/12 V Emergency steering ______________ Electro-hydraulic emergency steering
Alternator ______________________ Three-phase AC, 28 V/55 A system
Starter motor __________________ 24 V/5,4 kW
Attachment hydraulics
Design ________________________________ “Load-sensing” variable axial piston
pump with output control and
pressure cutoff
Max. flow ____________________________ 290 l/min.
Travel gear Max. operating pressure ________ 350 bar
Hydrostatic travel Cooling ________________________________ Hydraulic oil cooling using thermo-
transmission ________________________ All-wheel drive statically controlled fan and oil
Design ____________________________ Variable-displacement swashplate cooler
pump and axial piston motor in a Filtering ______________________________ Return-line filter in the hydraulic
closed-loop circuit with a 3-stage reservoir
planetary transmission. Direction of Control ________________________________ “Liebherr-Joystick” with hydraulic
travel is reversed by changing the servo control
flow-direction of the variable dis- Lift circuit ____________________________ Lifting, neutral, lowering
placement pump and float positions controlled by
Filtering system ______________ Suction-side filter for the closed Liebherr joystick with detent;
circuit automatic lifting-limit circuit
Control __________________________ By travel and inching pedal Tilt circuit ____________________________ Tilt back, neutral, dump
The inching pedal makes it possible automatic bucket positioning
to control the tractive and thrust
forces steplessly at full engine speed. Attachments
The Liebherr joystick is used to
control forward and reverse travel Geometry ____________________________ Powerful Z-pattern linkage with tilt
and select the travel stages cylinder and cast steel crosstube
Travel speeds ______________________ Stage 1 __________________________ – 8,0 km/h Bearings ______________________________ sealed
Stage 2 __________________________ – 18,0 km/h Cycle time at
Stage 2A (automatic) ______ – 18,0 km/h nominal load ________________________ Lifting __________________________________ 5,6 sec.
Stage 3A (automatic) ______ – 38,0 km/h Dumping ______________________________ 2,0 sec.
Forwards and in reverse with tyre Lowering (empty) __________________ 3,5 sec.
size 26.5R25
Operator’s cab
Design ________________________________ ROPS/FOPS cab resiliently mounted
on rear section of vehicle and noise-
damped; lockable door with sliding
window and 180h opening angle;
Axles emergency exit; toughened safety
glass windows, tinted; adjustable
All-wheel drive steering column as standard equip-
Front axle ____________________________ Fixed ment;
Rear axle ____________________________ Centre pivot, with 13h oscillating ROPS roll-over protection according
angle to each side. Obstacles up to to DIN/ISO 3471/EN 474-3 and
560 mm in height can be driven over FOPS falling objects protection
(with all four wheels remaining in according to DIN/ISO 3449/EN 474-1
contact with the ground) Operator’s seat ____________________ Air-suspensioned seat with lap belt
Differentials ________________________ Automatic limited-slip differentials Cab heating and ventilation __ With defrosting, fresh-air filter, air-
with 45 % locking action in both axles recirculated-air mode and heater
Final drive __________________________ Planetary final drive in the wheel supplied from engine’s cooling
hubs system. Air conditioning is standard
Track width __________________________ 2230 mm with all types of tyres equipment

Noise emission
(86/662/EWG) ______________________ In the operator’s cab
Without blower 69 dB(A)
Max. blower output 73 dB(A)
Brakes Outside cab 106 dB(A)
Wear-free service brake Self-locking of the hydrostatic travel
________
drive (acting on all four wheels) and
additional pump-accumulator brake
Capacities
system with wet multi-disc brakes Fuel tank ______________________________________________________________________________ 330 l
located in the wheel hubs. Two Engine oil (including filter change) __________________________________________ 18 l
separate brake circuits Pump distributor gears __________________________________________________________ 2,5 l
Parking brake ______________________ Electro-hydraulically actuated spring- Transmission __________________________________________________________________________ 21 l
loaded brake system on the trans- Front axle/wheel hubs ________________________________________________________ 36/20 l
mission Rear axle/wheel hubs ________________________________________________________ 24/11 l
Braking system complies with German road-vehicle construction Hydraulic tank ______________________________________________________________________ 160 l
and use regulations. Hydraulic system, total __________________________________________________________ 240 l

Technical Data
2
65°

45°
E

F
D
C
B
A I H

49º
J

K
G
L

Bucket type Loading Bucket Rock Bucket


Cutting tools T E T E T T-Delta
Bucket capacity m3 4,5 4,5 5,0 5,0 4,0 4,0
Bucket width mm 3000 3000 3000 3000 3000 3000
Specific material weight t/m3 1,8 1,8 1,6 1,6 2,0 2,0
Dumping height at max. lift height
A and 45h discharge mm 3385 3375 3300 3295 3440 3310
B Dump-over height mm 4100 4100 4100 4100 4100 4100
C Max. height of bucket bottom mm 4255 4255 4255 4255 4255 4255
D Max. height of bucket pivot point mm 4565
E Max. operating height mm 6165 6165 6245 6245 6075 6075
Reach at max. lift height
F and 45h discharge mm 1185 1190 1270 1280 1125 1260
G Digging depth mm 110 110 110 110 110 110
H Height above cab mm 3540
I Height above exhaust mm 3450
J Ground clearance mm 550
K Wheelbase mm 3450
L Overall length mm 8875 8695 8995 8815 8795 8980
Turning circle radius over outside bucket edge mm 7020 6980 7050 7010 6995 6995
Lifting force (SAE) kN 250 250 250 250 250 250
Breakout force (SAE) kN 190 190 175 175 203 175
Tipping load, straight kg 19010 18810 18910 18710 19130 19080
Tipping load, articulated at 37h * kg 16900 16710 16800 16620 16950 16890
Tipping load, articulated at 40h * kg 16690 16510 16600 16425 16795 16750
Operating weight * kg 24220 24420 24320 24520 24100 24150

* The figures shown here are valid with Michelin XHA 26.5R25 tyres and include all lubricants, a full fuel tank, the
ROPS/FOPS cab and the operator.
Different tyres and optional equipment will change the operating weight and overturning loads.
T = Welded-on tooth holder with add-on teeth
T-Delta = Welded-on tooth holder on Delta cutting edge with add-on teeth
E = Four-piece, bolt-on reversible cutting edge

The attachments are secured directly to the lifting arms.

Dimensions
3
Light material bucket

Light material bucket with bolt-on cutting edge


Bucket capacity m3 6,5 8,5
Bucket width mm 3200 3500
Specific material weight t/m3 1,2 1,0
A Dumping height at max. lift height mm 3170 3030
E Max. operating height mm 6430 6630
F Reach at maximum lift height mm 1330 1470
L Overall length mm 9000 9230
Tipping load, straight * kg 17430 17020
Tipping load, articulated at 40h * kg 15310 14950
Operating weight * kg 24620 24920

* The figures shown here are valid with Michelin XHA 26.5R25 tyres and include all lubricants, a full fuel tank, the
ROPS/FOPS cab and the operator.
Different tyres and optional equipment will change the operating weight and overturning loads.

The attachments are secured directly to the lifting arms.

Attachments
4
High-dump Bucket

A F

High-dump bucket with bolt-on cutting edge


Bucket capacity m3 6,5
Bucket width mm 3200
Specific material weight t/m3 1,0
A Dumping height at max. lift height mm 5480
E Max. operating height mm 7800
F Reach at maximum lift height mm 1750
L Overall length mm 9350
Tipping load, straight * kg 16700
Tipping load, articulated at 40h * kg 14500
Operating weight * kg 25350

* The figures shown here are valid with Michelin XHA 26.5R25 tyres and include all lubricants, a full fuel tank, the
ROPS/FOPS cab and the operator.
Different tyres and optional equipment will change the operating weight and overturning load.

The attachments are secured directly to the lifting arms.

Attachments
5
Selection of buckets
Rock bucket

4,0 m3

Loading bucket

4,5 m3

5,0 m3

Light material bucket

6,5 m3

8,5 m3

t/m3 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,2

115% 100% 95%


m n
ISO/SAE

Bulk material densities (t/m3)

Gravel, moist ____________________________ 1,9 Clay and gravel, Sandstone ________________________________________ 1,6
dry ________________________________ 1,6 dry ________________________________ 1,4
wet, 6 – 50 mm ________ 2,0 wet ________________________________ 1,6 Slate ________________________________________________ 1,75
dry, 6 – 50 mm ________ 1,7
crushed stone ______________ 1,5 Earth, dry ________________________________ 1,3 Bauxite ____________________________________________ 1,4
wet excavated ______________ 1,6
Sand, dry ________________________________ 1,5 Gypsum, broken ______________________________ 1,8
moist ____________________________ 1,8 Topsoil ______________________________________________ 1,1
wet ________________________________ 1,9 Coke ________________________________________________ 0,5
Weathered rock
Gravel and sand, 50 % rock, 50 % earth ______________________ 1,7 Slag, broken ____________________________________ 1,8
dry ________________________________ 1,7
wet ________________________________ 2,0 Basalt ______________________________________________ 1,95 Coal __________________________________________________ 1,1

Sand and clay __________________________________ 1,6 Granite ____________________________________________ 1,8

Clay, natural __________________________ 1,6 Limestone, hard ______________________________ 1,65


dry ________________________________ 1,4 soft ________________________________ 1,55
wet ________________________________ 1,65

Tyre sizes Width over tyres Change in vertical Use


dimensions
mm mm
26.5R25 Dunlop SP T7 LD L3 2910 + 35 Gravel
26.5R25 Michelin XHA L3 2930 + 0 Gravel
26.5R25 Michelin X-MINE D2 L5 2950 + 80 Scap material/waste
26.5R25 Michelin XLD D2 L5 2920 + 40 Stone/mining spoil
705/70R25 Michelin XLD L3 2940 – 70 Gravel
26.5R25 Good Year GP2B L2 2920 + 25 Sand/Gravel
26.5R25 Good Year RL2+ L2 2930 + 35 Gravel

6
Basic Machine
Standard Optional Standard Optional
Liebherr travel gear x Safety belt X
Ride control x Flashing turn indicators x
Liebherr shock absorbing element X High-beam headlights x
Automatic travel mode x Diagnosis system x
20 km/h speed limiting x
Electronical theft protection x
Creep speed x
Electronic crowding force control x
Warning lights for:
Combined inching-braking system x Engine oil pressure x
Multi-disc limited slip differentials in both axles x Engine overheat x
Air cleaner system with pre-filter x Parking brake x
Particle protection for radiator x Hydraulic oil temperature x
Emergency steering system x Air cleaner blockage x
Headlights x Battery charge x
Tail lights x Flow through emergency steering system x
Working area lights at front x Road travel X
Working area lights at rear x
Battery master switch x
Pre-heat system for cold starting x
Towing hitch x
Audible warnings for:
Lockable doors, service flap an engine hood x Engine oil pressure x
Toolbox with toolkit x Engine overheat x
Dust filter system x Overheat of hydraulic fluid x
Protective ventilation system x Emergency steering system X
Amber beacon x
Warning device for travel in reverse x
Exhaust pipe – special steel x
Noise suppression package “101” x
Function keys for:
Automatic central lubrication system x Air conditioning x
Hazard warning flashers x
Parking brake x
Electronic tractive force adaptation x
Creep speed x
Operator’s cab Ride control x
Automatic bucket positioner x
Noise-damped ROPS/FOPS cab
Hoist Kick-out x
with tinted safety glass x
Additional hydraulics x
Hot-water heater with defroster
Float position x
and recirculated-air system x
Headlights x
Adjustable steering column x
Working lights front x
Liebherr-joystick control x
Working lights rear x
Air conditioning system x
Road travel x
Liebherr operator’s seat – adjustable in 6 ways x
Wash/wipe system for rear window x
Air sprung operator’s seat with seat belt x
Amber beacon x
Sliding window x
Mode switch x
Emergency exit x
Floor mat x
Wash/wipe system for windscreen and rear window x
Interior rear-view mirror x Rotary switches for:
Sun visor x
Blower x
Bottle holder x
Heater x
Clothes hook x
Fresh air or recirculated air x
Storage box x
Adjusting the crowding force counter x
Storage compartment x
Plug x
Ashtray x
Horn x Equipment
Provision for radio including Loudspeaker x
Z-bar linkage x
Radio set x
Parallel linkage X
Operator’s package x
Hydraulic servo control of working hydraulics x
Automatic bucket positioner – adjustable x
Automatic hoist kick out – adjustable x
Float position x
Loading buckets with and without teeth,
Instruments and displays for: or bolt-on cutting edge x
Diesel engine pre-heat x High-dump bucket x
Engine oil temperature x Light material bucket x
Fuel reserve x Fork carrier and lift forks x
Timer for hours of operation x Hydraulic quick-change device x
Speedometer x 3rd hydraulic control circuit x
Travel speed ranges and gear selected x 3rd and 4th hydraulic control circuits x
Forward – reverse Travel x Comfort control x
Forward travel x
Reverse travel x Country-specific versions x
Speedometer x 64/74
Rev. counter x X = Not available
Clock x

7
Liebherr wheel loaders – principal data.
Stereoloader Stereoloader Stereoloader Stereoloader
Tipping load: L 506 3215 L 507 3465 L 508 3895 L 509 4440 kg
Bucket capacity: 0.8 0.9 1.0 1.1 m3
Operating weight: 4810 4930 5310 5510 kg
Engine output: 44/60 46/63 49/67 52/71 kW/hp

Stereoloader Stereoloader
Tipping load: L 512 4615 L 514 5305 kg
Bucket capacity: 1.3 1.5 m3
Operating weight: 7000 7700 kg
Engine output: 59/80 72/98 kW/hp

L 524 L 534 L 538 L 544


Tipping load: 7005 8625 9000 10600 kg
Bucket capacity: 2.0 2.4 2.5 3.0 m3
Operating weight: 10100 12100 12380 15300 kg
Engine output: 81/110 100/136 100/136 121/165 kW/hp

L 554 L 564 L 574 L 580


Tipping load: 12270 15285 16690 17850 kg
Bucket capacity: 3.5 4.0 4.5 5.0 m3
Operating weight: 17300 22450 24220 24740 kg
Engine output: 137/186 183/249 195/265 195/265 kW/hp

15/11/00

Environmental protection can help you earn money!

LBH/PM 8450557-2-06.01 Printed in Germany by Gerstmayer. Illustrations and data may differ from standard equipment. Subject to change without notice.
How economical is your
wheel loader?
5 Measuring your wheeled loader’s fuel
n=? consumption is as easy as this!
2,5m

35 B
4 Liebherr test method.
30 Determine the number of working cycles that can be carried
T ~ 35 sec.

out with 5 litres of diesel fuel. The material is picked up


3 from Heap A and carried in a Y movement to Point B, which
20 m

is 20 m away. The height of the bucket when the material


25 is dumped at Point B should be 2.5 m. These work cycles
– each of wich lasts for about 35 seconds – are continued
until the 5 litres of fuel in the external tank have been
2 used up.
20
How do you calculate the expected fuel consumption per
working hour?

15 A 1 400 = fuel consumption


per working hour
No. of working cycles

Values for the Liebherr wheel loaders


Numbers of
working cycles
Litres/
100 tons
Litres/
hour The Liebherr measuring
L
L
524:
534:
2.0
2.4
m3
m3
n = 48
n = 40
2.9
2.8
8.3
10.0 canister set.
L 538: 2.5 m3 n = 40 2.8 10.0
L 544: 3.0 m3 n = 35 2.6 11.4 Any Liebherr dealer will supply you with the measuring
L 554: 3.5 m3 n = 33 2.4 12.1 device free of charge or conduct the standard test for you
L 564: 4.0 m3 n = 24 2.9 16.7 if requested.
L 574: 4.5 m3 n = 23 2.7 17.4
L 580: 5.0 m3 n = 22 2.7 18.2
05/12/00

LIEBHERR-WERK BISCHOFSHOFEN GMBH, Postfach 49, A-5500 Bischofshofen, ç (0 64 62) 8 88-0, Fax (0 64 62) 8 88-3 85
www.liebherr.com, E-Mail: info@lbh.liebherr.com

With compliments:

You might also like