Professional Documents
Culture Documents
2 to 6 times the total KCl elec trolyte of competing sensors Max Temperature 1500C
Sensor Body
Glass electrode
Cutaway
Wood Spool
547/557 Cartridge
547/557
546/556 Hi-Pressure Ball Valve
Ball Valve Insertion Assembly
Insertion Assembly
www.measurIT.com
measurIT technologies
Features:
Chemically resistant CPVC, KYNAR, Polypropylene or PEEK body,
Rugged, quick-change, quick-clean,
Optional installation methods allows standard ization of entire plant with a minimum of
sensor part numbers,
546/556 sensors and assembly parts are interchangeable with ABB TBI-Bailey Models
TB556 and TBX556,
pH sensors utilize patented Axial Ion Path reference cell.
Wetted materials:
KYNAR, CPVC, PEEK, Polypropylene. Gr.2 Titanium, 316 Stainless Steel, porous TEFLON,
VITON, EPDM, Kalrez, Nickel, Wood, & Glass.
www.measurIT.com
measurIT technologies
Features:
Chemically resistant CPVC, KY NAR, Polypropylene or PEEK body,
Rugged, quick-change, quick-clean,
Optional installation methods allows standardization of entire plant with a minimum of
sensor part numbers,
547/557 sensors and assembly parts are interchangeable with ABB TBI-Bailey Models
TB557 and TBX557,
pH sensors utilize patented Axial Ion Path reference cell.
Wetted materials:
KYNAR, CPVC, PEEK, Polypropylene. Gr.2 Titanium, 316 Stainless Steel, porous TEFLON,
VITON, EPDM, Kalrez, Nickel, Wood, & Glass.
www.measurIT.com
measurIT technologies
Quick-change
In-line or Submersible
Features:
Chemically resistant CPVC, KY NAR or Polypropylene body,
Rugged, quick-change, quick-clean,
Optional installation methods allows standardization of entire plant with a minimum of
sensor part numbers. Ideal for sample lines and valved side-streams,
551/561 sensors and assembly parts are interchangeable with ABB TBI-Bailey Models
TB(X)551 and TB(X)561,
pH sensors utilize patented Axial Ion Path reference cell.
Wetted materials:
KYNAR, CPVC, Polypropylene. Gr.2 Titanium, 316 Stainless Steel, porous TEFLON,
VITON, EPDM, Kalrez, Nickel, Wood, & Glass.
www.measurIT.com
measurIT technologies
General purpose
In-line or Submersible pH Sensors
BAT-1 Industrial pH Sensor with PT100 Temperature Comp Unit
BAT-2 Industrial pH Sensor with Balco 3.01k Temperature Comp Unit
Design:
Longer lasting performance and minimal maintenance. The general Purpose CPVC sensor can
be used in either threaded insertion or submerged applications, using a 3/4’’ MNPT thread at both
the top and bottom of the sensor body.
Features:
CPVC body, AIP reference with VITON sealing rings, general purpose pH glass measuring electrode,
Flush porous TEFLON liquid junction, dual notch tip protection, thermocompensation - 3k ohm Balco
or PT100 RTD, and a flexible hi-temp, Lo-loss TPE jacketed cable. BAT-1 with PT100 utilizes all
tinned leads, the BAT-2 provides a BNC connection for the measuring electrode and reference and
tinned leads for the temperature compensation unit.
Wetted materials:
CPVC, Wood, porous TEFLON, VITON and Glass.
www.measurIT.com
measurIT technologies
Features:
Chemically resistant CPVC, KYNAR, Polypropylene or PEEK sensor cartridge,
Armored Hi-pressure body made from SS316, Titanum or Hasteloy C,
Can be equipped to provide triple redundancy against toxic gas escape,
pH sensors utilize patented Axial Ion Path reference cell.
Wetted materials:
KYNAR, CPVC, PEEK, Polypropylene. Gr.2 Titanium, 316 Stainless Steel, porous TEFLON,
VITON, EPDM, Kalrez, Nickel, Wood, & Glass.
www.measurIT.com
measurIT technologies
Hemi
Flat
Dome
Flush Tip
Best resistance to fouling by particulates.
Hemi glass provides greatest strength against high
pressure and temperatures, best response time,
greater signal strength, and resistance to caustic
and HF processes.
Flat glass is less exposed to impact damage
or abrasive flows.
Recessed Tip
Provides maximum tip protection against impact
damage and abrasive flows. Most suitable where
there is little risk of particulate or fibrous build-up.