Professional Documents
Culture Documents
Well Script 1
Introduction
?? To demonstrate the (Hydraulic) Fracture modelling capabilities of PIPESIM.
?? Model used
o Hydraulic Fractured Oil well with Black Oil fluid description.
?? Workflow:
o Explain the GUI setup completion NA point, tubing.
o Show the Hydraulic Fracture IPR input screen.
o Show the tubing description input screens.
o Show the PVT data.
o Run the Nodal Analysis operation.
?? This workflow demo does not attempt to build a case from scratch. To build a case study from scratch the training course material should
be followed.
Assumptions
?? PIPESIM 2000 v1.35 has been installed into the default directory on C:
?? The case study file Frac Well Script.bps is available.
Step Objective
Action
Result
Fig. 2
Press ok
Double click on tubing object
Comments
Model Setup
1.
2.
3.
4.
Show completion
model
Show Hydraulic
Fracture IPR model
Close dialog
Show tubing
description
5.
6.
7.
Data is saved by ok
Tab along the tubing description
screens
8.
10.
11.
Close dialog
Press ok
9.
Run Nodal
Analysis operation
13.
Show sensitivity
values.
Fig. 4.
14.
Run model to
produce NA plot
15.
Review results of
NA plot
16.
17.
18.
19.
Close dialog
Close PSPLOT
Close PIPESIM
Press ok
Press X in top right had corner
Select File->Close
Select No to save changes
Figures: