Professional Documents
Culture Documents
catatan pencarian]
leave a comment
Ini adalah hasil pencarian saya di Internet mengenai penulisan ukuran komponen (package)
pada aplikasi CadSoft Eagle.
With regards to the resistors, when you are looking through the resistor library the parts
have a type. The First half is the width in mm (at least for the EU parts) and the second part
is the length. The grid is the distance between the two solder holes.
For example, a 0309/10 resistor is 3mm in diameter, with a 9mm length and the holes are
set 10mm apart. Therefore, simply measure your resistor and use something similar.
sumber: a.d. http://arduino.cc/forum/index.php?topic=66609.0
(1 W/0207 size to > 3 W/0617 size)
And what does type 207 mean? I know it a package but I dont see 207 in the data sheet.
What does types 204, 207, 309, 411 mean?
<<>> It is the diameter and size of the resistor body in centimeters. So the 1. value in your
example means 1 Watt and body size 27 Milimeters = 0,20,7 Centimeters. Forget the x
and commas and you have 0207. (Like you write 2k7 for a resistor value of 2.7 kilo ohms).
The 3 Watts resistor has a body of 617 milli- or 0,61,7 centimeters. Since it is not really
healthy for a resistor to bend the wires sharp at the body you leave a milimeter or two
before you bend them as seen at page 4 of your pdf-file. So this leads to the /value. If you
check the eagle rcl.lbr pick a resistor 0207/7 and a 207/15 and place them in the schematic.
They look alike but if you switch to brd you will notice the differece. The bodies are equal but
the wires have a different length. So the value behind the / is the grid size of the part.
sumber: http://www.eaglecentral.ca/forums/
To find something suitable in the libraries
From the Kemet data sheet:
The C315 package has the following characteristics:
Lead spacing 2.54mm (0.1)
Lead diameter 0.51mm (0.020)
Package width 3.81mm (0.15)
Package thickness Std Voltage 2.54mm (0.1) , High Voltage 3.18mm (0.15)
In the library rcl.lib select your capacitor symbol preference of either C-EU or C-US
From the listed capacitors the ones that fit you size requirements have the package C025024X044
Capacitors are worse than resistors, largely because their bodies come in a wider variety of
shapes (that are less standardized), and of course there are all those different types; disk,
ceramic, mylar, film, electrolytic, tantalum, AC filter, etc (and those are just the FIXED value
caps!) Again, threre are slightly different US and European schematic symbols C-US and CEU in rcl.lib.
Again, theres a plethora of packages, but theres a standard format. In this case its SSSWWWXLLL, where SSS is the lead spacing (with an extra digit this time!), WWW is the
body width, and LLL is the body length.
Polarized caps are similar (CPOL-US or CPOL-EU in rcl.lbr), with a package name like TSSSDD, where T is a type designator (E for electrolytics, TT for tantalum drops, for
instance) SSS is the spacing again (only now it probably has an actual decimal point!),
and DD is the diameter (for radial caps).
sumber: Draw Electronic Schematics with CadSoft EAGLE by westfw on August 6,
2006.http://www.instructables.com
Range of
values
Ceramic Capacitor
(PTH)
Library Name
C025025X050
Description
2.5 mm pitch, 5 mm outline
Ceramic Capacitor
(PTH)
1nF to
220nF
C-EU
C050030X075
Ceramic Capacitor
(SMT)
10pF to
100nF
C-EU
C0603
Caermic Capacitor
(SMT)
100nF to
47uF
C-EU
C1206
Electrolytic
Capacitor (PTH)
1uF to 47uF
CPOLEU
CPOLEUE2-5
Electrolytic
Capacitor (PTH)
47uF to
100uF
CPOLEU
CPOLEUE2,5-7
Electrolytic
Capacitor (PTH)
100uF to
220uF
CPOLEU
CPOLEUE3,5-8
Electrolytic
Capacitor (PTH)
470uF to
1000uF
CPOLEU
CPOLEUE5-13
R-EU
0204/5
5 mm grid
R-EU
0207/7
7.5 mm grid
Various
Various
R-EU
R-EU
0414/15
0617/17
15 mm grid
17 mm grid
Various
R-EU
R0603
R-EU
R1206
Inductor (PTH)
Inductor (PTH)
Inductor (PTH)
1/8W resistor (PTH) Various
1/4 to 1/2W Resistor
Various
(PTH)
1 W resistor (PTH)
3 W resistor (PTH)
1/16 W resistor
(SMT)
USB connector
CON-USB or CON-USB2
Crystal or oscillator
Power connections
Toggle switch
Crystal
Supply
Switch
Testpad
SUB-D/D-type
connector
con-subd
Transformer
trafo or inductor-neosid
Screw terminal
connectors
DC power plugs
con-jack
Check footprints
More on this later
Numerous switches
Choose the pad to meet your
requirements.
sumber: http://www.ianstedman.co.uk/Technical/StartingwithEagleCAD/startingwitheagleca
d.html
My own screen captures, free to use and share as needed:
Dari: http://datasheet.octopart.com/C1206C106K4RACTU-Kemet-datasheet-5313890.pdf