Professional Documents
Culture Documents
Correct Answer
MRP
Your Answer MRP
True/False
Proper care and storage is not an essential part of a well
planned lubrication system.
Correct Answer
False
Your Answer False
True/False
In case of forward pass computation, the earliest event time of
a plain event equals the earliest event time of the preceding event plus
duration of activity emanating from the preceding event.
Correct Answer
True
Your Answer True
Multiple Choice Multiple Answer
Which three of the following are causes of continuous upward
pattern of Xbar-R control chart?
Correct Answer
Wear of tool , Abnormal rise in temperature ,
Accumulation of dirt
Your Answer Wear of tool , Abnormal rise in temperature ,
Accumulation of dirt
Multiple Choice Multiple Answer
Which of the following three methods used to select the
qualified supplier?
Correct Answer
By vendor plant surveys , By reputation , By
experience
Your Answer By vendor plant surveys , By reputation , By
experience
Multiple Choice Multiple Answer
Which of the following possibilities can be explored by using
flow process chart?
Correct Answer
Eliminating the operations or combining the
operations with another , Reducing the distance traveled by the workmen
or materials , Avoiding the waiting time and thereby reduce production
losses
Your Answer Eliminating the operations or combining the
operations with another , Reducing the distance traveled by the workmen
or materials , Avoiding the waiting time and thereby reduce production
losses
Select The Blank
sampling inspection.
Correct Answer False
Your Answer False
Select The Blank
Inspection is represented by ________ during recording for method study.
Correct Answer Square
Your Answer Square
Multiple Choice Multiple Answer
What are the benefits of inspection and quality control?
Correct Answer Adequate maintenance of quality , Ensures parts are
within specified limits of accuracy , Gives economy in production through
reduction of defective work
Your Answer Adequate maintenance of quality , Ensures parts are within
specified limits of accuracy , Gives economy in production through
reduction of defective work
Multiple Choice Multiple Answer
Which are the subtasks of the maintenance phase of the method study?
Correct Answer Monitoring and control , Performance appraisal , Audit on
savings
Your Answer Monitoring and control , Performance appraisal , Audit on
savings
Multiple Choice Single Answer
What is the cause of inherent variation or internal variation?
Correct Answer Cumulative effect of number of chance causes
Your Answer Worker's efficiency
Multiple Choice Single Answer
What is the meaning of " Product features" according to J.M.Juran?
Correct Answer Quality of design
Your Answer Quality of design
Select The Blank
REL chart exhibits relationship between ________ of departments in terms
Production n Operations 5
Select The Blank
OC curve of ideal sampling plan suggests that all lots less than 3%
defectives have the probability of acceptance of ________.
Correct Answer One
Your Answer One
Multiple Choice Single Answer
Process planning is the process of
Correct Answer establishing shortest and most economic path of
production
Your Answer establishing shortest and most economic path of production
Select The Blank
The ________ is a pair of chart consisting of average chart and range
chart placed one below another on a piece of graph paper.
Correct Answer X bar-R-chart
Your Answer X bar-R-chart
Production n Operations 4
Select The Blank
The design of any layout is governed by large number of factors and the best
layout is expected to ________ all these factors.
Correct Answer Optimise
Your Answer Optimise
True/False
In case of X bar-R charts,it is ensured that the assignable causes are detected
before the tolerances are violated, upper and lower statistical limits are worked out
and inserted into a chart.
Correct Answer True
Your Answer True
Multiple Choice Multiple Answer
Expediting function is concerned with following activities
Correct Answer Communicating possible delays in delivery date commitment to
sales department , Devising cures to keep rate of production in line with schedule ,
Progress chasing to identify delays which may hold up production
Time relationship between when a product is required and when it can be made
available Critical Ratio Scheduling Critical Ratio Scheduling
Select The Blank
Duration of each activity is referred to as ________.
Correct Answer Activity time
Your Answer Activity time
Multiple Choice Multiple Answer
Which of the following are examples of pure materials?
Correct Answer Bakeries , Ice factories , Woolen
Your Answer Bakeries , Ice factories , Woolen
True/False
Maintenance function must be decentralised apart from a size of a manufacturing
organisation for it's better functioning.
Correct Answer False
Your Answer True
True/False
The operator should not stop production if first piece is not approved by the
inspector.
Correct Answer False
Your Answer False
Multiple Choice Single Answer
Which of the following policies is advisable in case of low product variety and
large volumes?
Correct Answer Low Skilled Labour & Special Purpose Machines
Your Answer Low Skilled Labour & Special Purpose Machines
True/False
Cent percent inspection does not mean inspection of component for 100% quality
characteristics.
What do you mean by the project duration for which the total cost is minimum?
Correct Answer Optimum duration
Your Answer Optimum duration
Select The Blank
A ________ helps to determine the time required by the operator to complete a
specified task for the defined method at the defined pace of performance.
Correct Answer Work measurement
Your Answer Work measurement
Select The Blank
An Ideal OC curve is ________ shaped curve that accpets all the lots with quality
equal to or better than AQL .
Correct Answer Rectangular
Your Answer Rectangular
True/False
Inspection order is must even for simple jobs which can be inspected by shop
inspector with the tooling available on shop.
Correct Answer False
Your Answer False
Select The Blank
Function concerned with fixation of time allowed to qualified worker for a job is
called ________.
Correct Answer Work Measurement
Your Answer Time Measurement
True/False
In case of X bar-R charts,it is ensured that the assignable causes are detected
before the tolerances are violated, upper and lower statistical limits are worked out
and inserted into a chart.
Correct Answer True
Your Answer True
True/False
As a general rule, the number of tail event of an activity is more than that of it's
head event.
Correct Answer False
Your Answer False
True/False
The time chart, if necessary, may be modified considering the limitations of
resource.
Correct Answer True
Your Answer True
Multiple Choice Multiple Answer
What is the basic minimum requirement for those who are responsible for the
quality of design?
Correct Answer In depth knowledge about alternative materials and
manufacturing processes , access to latest technology and production process
adopted by industries in the developed market , Continuous effort in product
development
Your Answer In depth knowledge about alternative materials and manufacturing
processes , access to latest technology and production process adopted by
industries in the developed market , Continuous effort in product development
Multiple Choice Single Answer
Which of the following policies is advisable in case of low product variety and
large volumes?
Correct Answer Low Skilled Labour & Special Purpose Machines
Your Answer Low Skilled Labour & Special Purpose Machines
Multiple Choice Single Answer
What do you understand by the critical analysis of existing jobs to develop easier
and effective method?
Correct Answer Method study
Your Answer Method study
True/False
Inspection Order can be a verbal order
Correct Answer True
Your Answer True
Multiple Choice Multiple Answer
Which of the following products should be produced by using mass production?
Correct Answer Refrigerator , Tyre for automobile , Television Set
Your Answer Refrigerator , Tyre for automobile , Television Set
True/False
Originating process of raw material influence Process Planning
Correct Answer True
Your Answer True
Select The Blank
In Gantt Chart, the horizontal lines devide vertical lines into sections which
represents ________.
Correct Answer No. of work centres or operations
Your Answer No. of work centres or operations
Multiple Choice Multiple Answer
What are uses of diagrams in method study?
Correct Answer Study different plant layouts and select the most optimum one ,
Study the extent of traffic over the different routes of the plant , Identify the extent
of backtracking, cross traffic and obstacles encountered during the movement of
material.
Your Answer Study different plant layouts and select the most optimum one ,
Study the extent of traffic over the different routes of the plant , Identify the extent
of backtracking, cross traffic and obstacles encountered during the movement of
material.
Multiple Choice Multiple Answer
Which of the following are illustrations of inspection?
and Information?
Correct Answer Anonymous
Your Answer Anonymous
Multiple Choice Multiple Answer
Under the role of management consultant, consultant acts as a
Correct Answer Motivator , Leader , Counselor
Your Answer Motivator , Leader , Counselor
Multiple Choice Multiple Answer
Name the flagship companies under the Business family "Munjals"
Correct Answer Hero Honda , Hero Cycles
Your Answer Hero Honda , Hero Cycles
True/False
Under MRP system for common items order for procurement is placed based on
requirement for each product
Correct Answer False
Your Answer False
Multiple Choice Single Answer
Which of the following technique is activity oriented ?
Correct Answer Critical Path Method
Your Answer Project Evaluation & Review Technique
Multiple Choice Single Answer
Product layout is employed for manufacturing following products
Correct Answer refrigirators
Your Answer refrigirators
Multiple Choice Multiple Answer
Following are some of the Principles of Management advocated by F W Taylor
Correct Answer Selection of best worker for each particular task , Division of
work between worker and management , Training and development of the
workmen
Your Answer Selection of best worker for each particular task , Division of work
between worker and management , Training and development of the workmen
Multiple Choice Single Answer
Which is the next stage to the inspection based quality control in the historical
development of quality management.
Correct Answer Quality assurance
Your Answer Quality assurance
Select The Blank
The term ________ emplies the foregone profit due to inability of company to
produce.
Correct Answer Opportunity cost
Your Answer Opportunity cost
Select The Blank
Process sheets for parts in job production are prepared once and maintained as
________ process sheet.
Correct Answer Standard
Your Answer Standard
True/False
The steeper the OC curve, the better is the discrimination between good and bad
lots. Correct AnswerTrue
Your Answer True
Multiple Choice Single Answer
One of the sophisticated operations research techniques used in material planning
is
Correct Answer Dynamic programming
Your Answer Dynamic programming
True/False
Process Sheets for parts in batch production are not maintained as standard
process sheet
Correct Answer False
Your Answer False
Select The Blank
The ________ is the probability that a bad lot will be accepted by the sampling
plan. Correct AnswerConsumer's risk
Your Answer Consumer's risk
Multiple Choice Single Answer
What do you understand by inspection conducted on all jobs received back from a
customer as defectives?
Correct Answer Appraisal inspection
Your Answer Appraisal inspection
Multiple Choice Multiple Answer
MRP utilises the following information
Correct Answer Master production schedule , Product structure , Lead time for
procurement/manufacturing
Your Answer Master production schedule , Product structure , Lead time for
procurement/manufacturing
Match The Following
Correct Answer Your Answer
Scheduling Device Strings Strings
Interruption for machine utilisation Preventive maintenance Preventive
maintenance
Input for scheduling Overlapping of operations Overlapping of operations
Technique of scheduling Critical Path Analysis Critical Path Analysis
Multiple Choice Single Answer
A good layout makes effective use of space. Utilization of space for a department
like Stores can be measured by
Correct Answer Proportion of Cubic volume space utilized
Your Answer Proportion of Cubic volume space utilized
Your Answer Due to mistakes in reading blue prints , Due to errors in tooling ,
Due to wrong machine set up
Select The Blank
The ________ phase also provides an opportunity to the practitioner to assess the
effectiveness of the approach followed by him and make changes in the
methodology.
Correct Answer Maintenance
Your Answer Critical examination
Multiple Choice Multiple Answer
Order preparation process for products manufatured to order requires following
documents
Correct Answer Sales Order , Work order , Shop order
Your Answer Sales Order , Work order , Shop order
Match The Following
Correct Answer Your Answer
Material Planning for dependent demand MRP MRP
Forcasting requirement for indirect material Past consumption analysis technique
Past consumption analysis technique
Inventory control by classification ABC Analysis ABC Analysis
Structure of the product BOM BOM
Multiple Choice Single Answer
Which kind of preventive inspection detects some defects in moving parts, internal
cracks, and others , when machine is under preplanned shutdown?
Correct Answer Internal inspection
Your Answer Internal inspection
Select The Blank
A ________ is another form of subcontracting.
Correct Answer Hiring capacity
Your Answer Hiring capacity